Total 4,883 Maintenance / Repair job vacancies

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during/after office hours
• Support Maintenance Lead to upkeep Clients’ security system inventory list and maintenance spares
• Support Maintenance Lead to liaise with clients, integrated facility management representatives and trade contractors so as to facilitate to carry out work at clients’ premises
• Liaise closely with clients, integrated facility management representatives on all service/maintenance related issues to achieve optimal results.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as required including new installations, A&A, HOTO, T&C and equipment replacement etc

Requirements

• Diploma/Higher Nitec/Nitec in Engineering/IT or relevant working experience in the related field
• Hands on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems, CCTV systems and Electronic Key Management System.
• Additional knowledge in hardware configuration, System Networking and integration with third-party systems will be an advantage
• Must be a team player,Independent and willing to take ownership and Pro-active in Problem solving
• Driving License (Car or Motorbike) – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Work Location is at 3 Shan Road/Clients’ premises
• 5 days work week
• Require to perform rotational standby duties
• Experience Candidate will be considered for Maintenance Engineer
• Fresh Graduates keen to seek a career path in security system are welcome to apply as a Maintenance Technician

About the Role

Join a established defence and engineering organisation as a Production Technician, where you'll be hands-on with specialised vehicle assembly and maintenance. Full on-the-job training is provided — no prior experience needed.

This is a great opportunity to kickstart a technical career in a structured, professional workshop environment.

What You'll Be Doing

• Perform routine servicing, maintenance, and inspections on specialised vehicles
• Assist in diagnosing mechanical issues under the guidance of senior technicians
• Support senior technicians and supervisors during repair and assembly work
• Maintain a clean, safe, and organised workshop environment
• Follow safety and operational procedures at all times

What We're Looking For

• Min. NITEC or Diploma in any Engineering discipline
• No experience required — full on-the-job training provided
• Maintain a clean, safe, and organised workshop environment to promote safety and efficiency
• Follow safety and operational procedures consistently to comply with workplace standards

What's In It For You

• Salary: $2,400/month - $2,600/month (depending on qualifications)
• Structured training and skills development

Job Details

• Employment type: Contract (2 years, renewable)
• Location: Jalan Boon Lay / Chin Bee (fixed, no rotation)
• Working hours: 7.30am – 5.15pm
  

Liz Ooi Li Chen (R1104561)
Recruit Express Services Pte Ltd (13C6614)

To lead this growth, we are seeking a highly connected and results-driven Business Development Manager (Process Construction) who can open doors, build partnerships, and secure profitable projects.

The Role

You will be responsible for identifying, pursuing, and winning subcontract or joint venture opportunities in Singapore’s process construction sector. Your primary focus will be on high-profitability niches including:

• Cleanroom construction & modular systems

• Biopharma / GMP facility fit-outs

• Data center cooling & M&E infrastructure

• Specialty industrial coating & insulation

You will leverage your existing network with EPC contractors, main contractors, and plant owners to build a strong project pipeline and drive revenue growth.

Key Responsibilities

Area

What You Will Do

Lead Generation

Identify and track upcoming tenders from BCA, GeBIZ, and private developers. Focus on high-value projects in Jurong Island, Tuas Biomedical Park, and other key industrial zones.

Client Acquisition

Build and maintain relationships with decision-makers at EPC firms (e.g., PEC Ltd., Rotary Engineering), main contractors (e.g., Kajima, Gammon, L&K Engineering), and plant owners (e.g., Pfizer, WuXi Biologics, ExxonMobil).

Tender Management

Lead end-to-end proposal development, including cost estimation, technical writing, and compliance with BCA / CoreTrade requirements.

Contract Negotiation

Negotiate commercial terms, contract types (lump sum, unit rate, turnkey), and ensure a smooth handover to project delivery teams.

Pipeline & Reporting

Maintain a live opportunity pipeline, track KPIs (win rate, contract value, new clients), and provide regular market intelligence to senior management.

What We Are Looking For

Essential Experience & Network

• 8–12 years of business development or technical sales experience in Singapore’s process construction, pharmaceutical, cleanroom, or data center sectors.

• Proven track record of winning projects in at least one high-value niche (e.g., cleanroom M&E, biopharma fit-out, data center infrastructure).

• Existing relationships with key decision-makers at EPC contractors, main contractors, or plant owners.

• Deep understanding of BCA registration, CoreTrade certifications, and standard contract forms (PSSCOC, SIA, REDAS).

Qualifications

• Degree in Engineering (Chemical, Mechanical, Electrical) or Business Administration.

• PMP or CoreTrade certification is a strong advantage.

Personal Attributes

• Self-starter with a hunter mentality.

• Excellent negotiation, presentation, and proposal-writing skills.

• Ability to work independently and collaboratively with technical and costing teams.

Job Description & Requirements

Maintenance Technician RESPONSIBILITIES:

To assist the Maintenance Engineer/Supervisor maintains production and quality by ensuring operation of machinery and mechanical equipment.

Install/maintain of machinery and equipment

Disassemble and reassemble machinery and equipment

Repair or replace broken or malfunctioning parts and conduct tests to ensure that repairs are satisfactory

Monitor performance of machinery and equipment, adjust and calibrate as needed

Periodically perform basic diagnostic tests and preventive maintenance on machines, equipment and plant facilities in accordance with prescribed schedules

Clean and lubricate equipment and machinery

Perform simple machinist duties and responsibilities

Perform mechanic skills including but not limited to mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines

Read and interpret equipment manuals and work orders to perform required maintenance and service.

Perform a variety of plumbing maintenance and carpentry functions

Use a variety of hand and power tools in performing duties

Comply with safety regulations and maintain housekeeping

Upkeep of spare parts and maintenance room

Upkeep of forklift

Perform ad hoc duties as assigned

REQUIREMENTS:

Candidate must possess at least Diploma/ITE Mechanical, Electrical / Industrial Maintenance equivalent

At least 1 Year of industrial maintenance experience

Cindy Teng (EA Reg No: R2090544)

Active Manpower Resources Pte Ltd (EA Lic No: 06C3757)

The successful candidate is to maintain and repair all instruments, plant equipment including DCS IO card.  Keep all equipment in the best operating condition and minimizing equipment breakdown and optimizing cost.

The job includes the following:

• Instrument Engineering: Directs and coordinates fabrication, installation, operation, application, maintenance, and repair of instruments, DCS and PLC systems.

• Ensures that quality levels and industry standards are maintained or improved in the manufacturing process.

• Oversees installation, operation, maintenance, and repair of equipment such as temperature, pressure, level, flowmeters, junction boxes, marshaling and DCS cabinets.

• To evaluate instrument quotation and determine their cost-effectiveness and efficiency.

• To evaluate field installations and recommend design modifications to eliminate malfunctions.

• To lead / support implementation for plant modifications and plant improvement projects.

• To lead / support plant troubleshooting and equipment failure root cause analysis.

• To co-ordinate / implement maintenance activities. This will include multi-disciplinary activities with other maintenance teams as well as external vendors. Includes work planning for routine, non routine work, turnaround and shutdowns.

• To issue / receive Work Permit for maintenance and project activities includes creating and reviewing of Risk Assessments.

• To provide / support engineering solutions for problems related to equipment reliability.

• To maintain / support inspection readiness of the systems to ensure audit compliance with regulatory, safety and engineering standards.

• To use the SAP PM module for maintenance records, maintenance history records and information search.

• To develop / support standard work for technicians and perform Gemba and problem solving to ensure adherence and improvement to the technician standard work.

Requirements:

• ITC/ITE/NTC 2 or 3 on instrument with minimum 5 years working experience in pharmaceutical, petrochemical, chemical or relevant process industry.

• Technician Diploma from Polytechnic will be an advantage.

• Sound engineering knowledge of instrumentation; knowledge with DCS and PLC system will be an advantage

• Must be able to work on shifts.

• Strong analytical and problem-solving skills.

• Knowledge of local codes of practice.

• Effective team player, customer focus, self-driven and the ability to create business solutions.

• Must be willing to provide support after office hours when required.

• Possess excellent communication, interpersonal and organizational skills.

• Good knowledge of cGMP and facility validation for the pharmaceutical industry will be an advantage

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore  

#Li-GSK  

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a purpose to unite science, technology and talent to get ahead of disease together. We aim to positively impact the health of 2.5 billion people by the end of the decade, as a successful, growing company where people can thrive. We get ahead of disease by preventing and treating it with innovation in specialty medicines and vaccines. We focus on four therapeutic areas: respiratory, immunology and inflammation; oncology; HIV; and infectious diseases – to impact health at scale.

People and patients around the world count on the medicines and vaccines we make, so we’re committed to creating an environment where our people can thrive and focus on what matters most. Our culture of being ambitious for patients, accountable for impact and doing the right thing is the foundation for how, together, we deliver for patients, shareholders and our people.

We are committed to creating an inclusive workplace and providing equal opportunities for all applicants. We embrace an agile working culture across our roles, so if flexibility is important to you please discuss opportunities with our hiring team. If you need any adjustments to the recruitment process to help you demonstrate your strengths and capabilities, contact APACRecruitment.Adjustments@gsk.com. Please note this email is for adjustment requests only; for other enquiries please use our standard contact channels.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Job Summary:  
Equipment Technicians are responsible for monitoring, sustaining, and improving the equipment in their assigned area, while working in partnership with Shift Operations team members, area equipment engineers and tool vendors. Equipment Technicians monitor tool performance, schedule and perform preventative maintenance on assigned tool sets, and use mechanical, electronic and PC/software skills to repair equipment issues. 
 
Main Responsibilities:  

• Performs electrical or mechanical troubleshooting to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process 
• Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, rough sketches or drawings 
• Uses test and diagnostic equipment to perform checkouts. 
• Rebuilds manufacturing equipment as required 
• May perform equipment modifications as directed by engineers. 

 
Minimum Required Qualifications/Experience  

• Diploma in Engineering. Mechanical/Electrical/Electronic Engineering is preferred 

• Able to work on 12 hours rotating shift.

Preferred Technical Skills  

• Experience in equipment maintenance and troubleshooting is preferred 

• Knowledge of semiconductor manufacturing process and technologies is preferred 

• Knowledge of AI tools and application 

Must Have Soft Skills 
• Strong analytical and problem-solving skills with a data-driven mindset  
• Effective communication skills for cross-functional collaboration with engineering, operations, and quality teams 
• Ability to work independently and manage multiple priorities in a fast-paced environment 
• Adaptability and resilience in a dynamic manufacturing setting 
 

Highly Desirable/Preferred skills or experience  
• Experience in or knowledge on semiconductor manufacturing process and technologies 
• Familiarity with MES (Manufacturing Execution Systems) and automation tools 

•  Internship or experience gained as equipment in the semiconductor industry is a plus 

Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value 
  

  Performs electrical or mechanical troubleshooting to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process. Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, rough sketches or drawings. Uses test and diagnostic equipment to perform checkouts. Rebuilds manufacturing equipment as required. May perform equipment modifications as directed by engineers.

The PFA & EFA Technician will provide comprehensive Electrical Failure Analysis (EFA) and Physical Failure Analysis (PFA) support for products across NPI, qualifications and high-volume manufacturing (HVM).  

A key part of this role is the disposition of maverick material triggered by the Statistical Bin Limit (SBL) system—using data-driven evaluation, structured troubleshooting, and effective collaboration with cross-functional partners. You will collaborate closely with key stakeholders to identify failure signatures, determine root cause and failure mechanisms, recommend lot disposition, and partake on continuous improvement to reduce and improve SBL fail rates. 

This position requires keen technical curiosity, disciplined execution, clear communication, and strict adherence to lab safety and quality systems in a fast-paced production environment. 

Key Responsibilities 

1) Maverick Lot Disposition via SBL System & Deviation Management 

• Extract, interpret, and analyze test data to support SBL-triggered investigations. 

• Execute and follow up on FA actions (EFA and/or PFA) to determine disposition paths. 

• Recommend and communicate lot dispositions clearly and timely to stakeholders for quality control. 

• Maintain strong working knowledge of test processes, equipment, systems, and product behavior to enable accurate decision-making. 

• Document deviations and observations and provide feedback through the appropriate quality management system, ensuring traceability and compliance. 

2) Electrical Failure Analysis (EFA) 

• Develop and maintain strong EFA skills across product technologies to identify root cause and understand failure mechanisms. 

• Utilize advanced FA tools such as an IV curve tracer, micro-prober, and bench tester to perform EFA. 

• Support site EFA activities including failure confirmation, characterization, and electrical failure data correlation studies. 

• Provide EFA support and PFA recommendations for assembly failure cases and other escalations. 

3) Physical Failure Analysis (PFA) 

• Conduct physical failure analysis and correlate electrical failure modes to physical defects when needed. 

• Perform package and sample preparation activities such as:  

• Package de-processing. 

• Cross-sectioning support (manual and/or tool-assisted) 

• IMC measurement (where applicable) 

• Utilize layout and failure localization information to correlate suspected defect locations. 

• Operate FA lab tools such as Ion Miller, FIB, EDX, SEM, 2D/3D X-ray, Thermal EMMI, and other laboratory equipment. 

• Capture, save, and organize images and data; write structured, detailed FA documentation and reports with clear conclusions and supporting evidence. 

• Coordinate with vendors for tool maintenance, upgrades, and service support; support general tool upkeep and lab readiness. 

4) Continuous Improvement & Productivity 

• Propose and implement engineering and technical improvement ideas to reduce SBL triggers and optimize SBL disposition efficiency for EFA/PFA workflows. 

• Assist engineers with initiatives to improve FA efficiency, effectiveness, and consistency (methods, tooling, templates, checklists, and standard work). 

• Support labor productivity projects that improve throughput, reduce rework, and enhance reporting quality. 

• Contribute to technical projects and, where applicable, support technical paper creation and knowledge sharing. 

Qualifications 

• Nitec / Higher Nitec / Diploma in Electrical & Electronics Engineering, Computer Engineering, or a related discipline. 

• Experience in test failure analysis, a lab environment, or manufacturing troubleshooting is a strong advantage. 

• Enthusiastic working with data, diagnostic tools, and structured problem-solving methods. Able to work effectively in cross-functional teams and communicate clearly in a production environment. 

• Required to work 12-hour rotating shifts. 

Preferred Skills 

• Proficiency in FA tools and techniques (FIB, SEM, CSAM, Emmi, Oscilloscope, I-V Curve Tracer, ATE). 
  

  Responsible for performing electrical, mechanical or software troubleshooting to determine problems in non-functioning test equipment. Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, and/or rough sketches or drawings. Uses test and diagnostic equipment to perform checkouts. May perform equipment modifications as directed by test/manufacturing engineers.

Job Description

As an Automation Equipment Technician, you will play a critical role in sustaining and improving advanced automation equipment within the manufacturing environment. This position requires strong technical skills in troubleshooting, preventive maintenance, and equipment optimization, while collaborating closely with Shift Operations, Equipment Engineers, and tool vendors. You will ensure equipment reliability, drive continuous improvement, and support automation initiatives to enhance productivity and efficiency. 

Key Responsibilities: 

• Repair and maintain automation equipment such as AMHS (Automated Material Handling System), ASRS (Automated Storage and Retrieval System), and AGV (Automated Guided Vehicles). 

• Perform electrical and mechanical troubleshooting to diagnose and resolve issues in electro-mechanical equipment.  

• Dismantle, adjust, repair, and assemble equipment based on layout plans, blueprints, and technical manuals.  

• Execute preventive maintenance (PM) and calibration activities to maintain equipment within specifications.  

• Implement equipment modifications as directed by engineering teams.  

• Monitor tool performance and ensure compliance with shift KPIs for uptime and quality.  

• Prepare detailed shift reports and conduct effective passdowns.  

• Execute continuous Improvement Projects (CIP) to enhance equipment reliability and efficiency.  

• Analyze equipment data to recommend advanced troubleshooting and predictive maintenance actions.  

• Maintain a clean and safe work environment through proper housekeeping practices.  

• Collaborate with operations and engineering stakeholders to resolve production line issues promptly. 

Additional Responsibilities 

• Support automation integration projects and assist in deploying new technologies. 

• Participate in root cause analysis and corrective action implementation for recurring issues. 

• Ensure compliance with safety standards and EHS protocols during all maintenance activities. 

Preferred Qualification  

• Diploma in Mechanical, Electrical/Electronics, Mechatronics, or related automation disciplines. 

• Handson and safety-first mindset. 

• Proficiency in basic PC/software tools for equipment monitoring and reporting. 

• Ability to interpret technical drawings, schematics, and manuals. 

• Good communication and teamwork skills to collaborate across functions. 

• Willingness to work in a fast-paced, shift-based environment. 

• Able to work on 12 hours rotating shift, including night shift.
  

  Performs electrical or mechanical troubleshooting to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process. Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, rough sketches or drawings. Uses test and diagnostic equipment to perform checkouts. Rebuilds manufacturing equipment as required. May perform equipment modifications as directed by engineers.

      Diagnose, troubleshoot and repair mobiledevices;

•    Quality control and testing of repaireddevices to ensure full functionality. Resolve/manage customer inquiries;

•    Able to interact positively with customersat the storefront and over the phone;

•    Ability to multi-task between repairs andcustomer service;

•    Other related duties as required;

•    Maintain and use repair tools and equipment.Including software and in-store POS system to track repair tickets andinventory;

•    Strategically plan the order of operationsto ensure a successful repair;

•    Provide estimates and quotes;

•    Glass only replacement on Samsung and iPads;

•    Microscopic Board work; componentreplacement Hand-solder SMT components,

•    remove and replace thru-hole comp withoutboard damage,

•    solder wires and cables,

•    Diagnosis, troubleshoot and repair mobiledevices;

•    identify assembly and documents issues;

•    Repair logic board issues from water damage.

Requirements:

•    Excellent knowledge of customer service bestpractice with previous experience;

•    Ability to repair a variety of mobiledevices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone,and iPads.);

•    Ability to communicate effectively with awide variety of people in a professional manner, face to face, on the telephoneand in writing;

•    Knowledge of mobile devices includingmanufacturers, operating systems, and network service providers;

•    Willing to work flexibly and withenthusiasm;

•    Excellent organizational skills;

•    Good attention to detail and ability to showinitiative;

•    Ability to demonstrate practicaltroubleshooting and problem analysis techniques;

•    Ability to plan and prioritize your workloadwithout supervision;

Responsibilities

• Troubleshoot of machines.
• Liaise with suppliers to do rectification/ improvement.
• Handling production works.
• Any other tasks as assigned by Supervisor.

Requirements

• Nitec in any discipline or equivalent.
• Process 2 years of relevant work experience in assembly line is preferred.

Working hours: 8am to 5pm (Mon to Fri)

Overtime claimable

Interested applicants are welcome to send your resume to: career@oneconsulting-global.com

EA Personnal R1107675

Agency no. 07C3676

The Contamination Control & ESD Technician supports the semiconductor manufacturing environment by ensuring that cleanroom conditions and electrostatic discharge (ESD) protections meet factory and industry standards. This role conducts routine environmental monitoring, performs ESD audits, supports qualification activities, and assists in contamination or ESD‑related investigations. The technician works closely with engineers and cross‑functional teams to maintain a stable and compliant production environment, helping safeguard product quality, equipment reliability, and operational efficiency.

Key Responsibilities:

• Perform routine cleanroom environmental monitoring, including airborne particle measurements, AMC sampling, metal contamination checks, and environmental logging.

• Conduct ESD compliance checks, such as wrist strap and footwear testing, equipment grounding verification, workstation audits, and point‑to‑point resistance checks.

• Assist engineers with tool and material qualifications, ensuring all new equipment, spare parts, and consumables meet contamination and ESD requirements before release to production.

• Support contamination and ESD excursion investigations by collecting samples, gathering data, performing preliminary checks, and documenting observations accurately.

• Carry out scheduled preventive maintenance and calibration for environmental and ESD monitoring instruments to ensure consistent performance.

• Maintain detailed and accurate documentation, checklists, and records to support process traceability and audit compliance.

• Perform cleanroom protocol checks, ensuring proper gowning, material handling, housekeeping, and contamination‑control standards are followed.

• Report abnormal conditions promptly and escalate potential contamination or ESD risks to engineers or supervisors.

• Collaborate with Manufacturing, Equipment, Facilities, and Engineering teams to support daily fab operations and ensure compliance across production areas.

• Adhere to all EHS, cleanroom, and company safety requirements while maintaining a high standard of workplace discipline.

• Participate in continuous improvement activities, offering suggestions to improve contamination control and ESD practices.

Requirements:

• Nitec/Higher Nitec/Diploma in Electrical, Electronics, Mechatronics, Chemical Process, or a related technical field; equivalent hands‑on experience in a manufacturing or semiconductor environment is also accepted.

• Ability to work in a semiconductor cleanroom environment, following gowning, contamination‑control, and safety protocols.

• Strong attention to detail with the ability to follow standard operating procedures and complete tasks accurately and consistently.

• Good communication skills and the ability to work effectively within cross‑functional teams.

• Comfortable working in a fast‑paced, dynamic semiconductor fab environment with shifting priorities.

• Willingness to learn, adapt, and take ownership of assigned tasks with positive attitude and strong teamwork mindset.

• Experience with environmental monitoring tools or ESD test equipment is an added advantage.

• Able to work on 12 hours rotating shift (including night shift)
  

  Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

Join our outstanding team at Micron as a Product Quality Assurance (PQA) Technician in Singapore and contribute to our world-class engineering efforts! This role offers an exceptional chance to collaborate closely with local and global collaborators and drive quality excellence in our products. 

Responsibilities and Tasks:

• Assist PQA engineer in managing quality deviation and drive for closure of corrective/preventive actions to drive for deviation reduction and continual improvement.

• Conduct inline assessment and validate corrective and preventive actions to drive inline and outgoing control to meet customers’ quality requirement.

• Monitor and keep track corrective action, prevention action and lesson learn fanout status.

• Use automation tool (Power BI, Power Apps, Tableau etc) to develop and enhance dashboards for quality metrics. 

• Establish standard operating procedure for quality related monitoring.  

• Perform Data Mining to identify quality improvement opportunities and assist PQA engineer in leading site quality improvement projects

Requirements: 

• Nitec/Higher Nitec/Diploma in Engineering or a related field.

• Able to work on 12 hours rotating shift (including night shift).

• Proven experience in quality control within an engineering environment.

• Ability to troubleshoot and resolve equipment issues.

• Excellent documentation and procedural development skills.

• Strong collaborative skills to work with diverse teams.

• Ambitious and diligent approach to uphold high standards of material quality.

• Ability to determine and successfully implement quality control protocols.

• Knowledge and experience in Artificial Intelligence applications is a plus

• Embody Micron’s core values:

• People – Respect, develop, and empower others

• Innovation – Drive continuous improvement and breakthrough thinking

• Tenacity – Show grit and determination

• Collaboration – Build trust and foster teamwork

• Customer Focus – Deliver excellence and value 
  
• Assists engineers in testing and inspecting products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. Implements methods and procedures for inspecting, testing, and evaluating products, processes and/or production equipment. Report such data to management and production engineering so problematic areas may be addressed.

Join our outstanding team at Micron as an Incoming Quality Control Technician in Singapore and contribute to our world-class engineering efforts! This role offers an exceptional chance to collaborate closely with local and global collaborators and drive quality excellence in our materials.

Responsibilities and Tasks: 

• Assist the IQC Engineer in the qualification of new IQC tools.

• Provide support for IQC calibration and preventive maintenance, including raising purchase requisitions to equipment vendors.

• Address issues related to IQC equipment to ensure flawless operations.

• Develop and detail IQC procedures and establish operation and PM systems.

• Establish and uphold SAP QM, eCOA, and IQC SPC for incoming materials.

• Conduct First Article Inspection activities for new materials.

• Conduct incoming material inspections for quality control, encompassing a range of materials such as HBM materials.

Requirements: 

• Nitec/Higher Nitec/Diploma in Engineering or a related field.

• Able to work on 12 hours shift (including night shift)

• Proven experience in quality control within an engineering environment.

• Ability to troubleshoot and resolve equipment issues.

• Excellent documentation and procedural development skills.

• Strong collaborative skills to work with diverse teams.

• Ambitious and diligent approach to uphold high standards of material quality.

• Ability to determine and successfully implement quality control protocols.

• Knowledge and experience in Artificial Intelligence applications is a plus

• Embody Micron’s core values:

  People – Respect, develop, and empower others

  Innovation – Drive continuous improvement and breakthrough thinking

  Tenacity – Show grit and determination

  Collaboration – Build trust and foster teamwork

  Customer Focus – Deliver excellence and value

Assists engineers in testing and inspecting products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. Implements methods and procedures for inspecting, testing, and evaluating products, processes and/or production equipment. Report such data to management and production engineering so problematic areas may be addressed.

Key Responsibilities:

• Carry out gas meter replacement works (residential/commercial/industrial)
• Perform installation, removal, and testing of gas meters
• Conduct leak checks and ensure safe commissioning
• Carry out minor piping modifications (for LGSW-F)
• Ensure compliance with safety procedures and standards

Requirements:

• Valid LGSW-R or LGSW-F certification
• Relevant experience in gas installation or maintenance
• Ability to work outdoors and travel islandwide

Preferred:

• Experience in meter replacement projects
• Knowledge of gas safety regulations

 -Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager