Total 255 Junior Executive level Maintenance / Repair job vacancies

Responsibilities

• To carry out routine inspections, repair, corrective and preventive maintenance on all switchboard, circuit breakers, transformers switch gears and cleanliness of all High Voltage, Low Voltage, MSB room and genset room.
• To liaise with utility provider and regulatory body such as TNB and Suruhjaya Tenaga on utility service and compliance issue.
• Responsible as 11kv high tension chargeman. Prepare, plan, coordinate, implement & monitor the preventive, predictive, condition monitoring and breakdown maintenance of electrical supply & distribution.
• Responsible for the safety and proper operation of high-tension power supply.
• To carry out maintenance and troubleshooting of plant electrical facilities, machineries and equipment.
• To liaise with the solar system manufactured company to review the solar energy system maintenance guidelines and any other compliance issue.
• To monitor and record daily input and output reading solar system power generation and power usage and provide a report to the superior.
• To plan, prepare, coordinate, implement, and monitor the list of maintenance and preventive maintenance checklist of the factory solar energy system.
• To carry out inspections, repairs, corrective and preventive maintenance for the solar energy system including all battery, solar panel, wiring and connections, inverter, control panel system, solar panel roof platform and PV panel.
• Liaise, supervise, and monitor external contractor’s works and make sure all jobs carry out by contractor are compliance to Electrical Supply Act and regulation.

Requirements

• Electrical Power Engineering Professional Certificate.
• Chargeman BO 11kv.
• Technical skills in High Voltage Chargeman.
• Computer knowledge is required – Microsoft Office.
• Good interpersonal skill and an analytical mind.
• Willing to work in Pasir Gudang, Johor.

Interested candidates are encouraged to apply online / write-in / Email with comprehensive resume with a non-returnable photograph, stating your expected and current salary, contact telephone number to:

Human Resource & Administration Department,

Pantech Stainless & Alloy Industries Sdn Bhd

PTD 204334, Jalan Platinum Utama

Kawasan Perindustrian Pasir Gudang, Zon 12B

81700 Pasir Gudang, Johor Tel: 607-251 8888

Email: psa-hr@pantechssalloy.com

Perks & Benefits

• Open culture
• Personal development opportunities

職責

• 對所有配電盤、斷路器、變壓器開關設備進行日常檢查、維修、糾正和預防性維護，並保持所有高壓、低壓、主配電箱房和發電機房的清潔。
• 與公用事業供應商和監管機構（如TNB和Suruhjaya Tenaga）就公用事業服務和合規問題進行聯絡。
• 擔任11千伏高壓電工，負責電力供應和配電系統的預防性維護、預測性維護、狀態監測和故障維修的準備、規劃、協調、實施和監控。
• 負責高壓電源的安全和正常運作。
• 負責工廠電氣設施、機械和設備的維護和故障排除。
• 與太陽能係統製造商聯絡，審查太陽能係統維護指南及任何其他合規性問題。
• 監控並記錄太陽能係統每日的發電量和用電量，並向上級報告。
• 規劃、準備、協調、實施和監控工廠太陽能係統的維護和預防性維護檢查清單。
• 對太陽能係統進行檢查、維修、糾正和預防性維護，包括所有電池、太陽能電池板、線路和連接、逆變器、控制面板系統、太陽能電池板屋頂平台和光伏板。
• 負責聯絡、監督和監控外部承包商的工作，並確保承包商所進行的所有工作均符合《電力供應法》和相關法規。

要求

• 電力工程專業證書。
• Chargeman BO 11kv。
• 高壓電工的技術技能。
• 需具備電腦知識－熟練使用微軟辦公室軟體。
• 良好的人際溝通能力和分析思考。
• 願意在柔佛州巴西古當工作。

有意者請透過以下方式申請：線上申請/書面申請/電子郵件申請，請附上包含不可退還照片的完整簡歷，並註明期望薪資和目前薪資，以及聯絡電話：

人力資源與行政部

Pantech Stainless & Alloy Industries Sdn Bhd

PTD 204334，白金烏塔瑪路

巴西古當川山工業園區，Zon 12B

81700 巴西古當, 柔佛電話: 607-251 8888

電子郵件：psa-hr@pantechssalloy.com

福利待遇

• 開放文化
• 個人發展機會

Tanggungjawab

• Menjalankan pemeriksaan rutin, pembaikan, penyelenggaraan pembetulan dan pencegahan pada semua papan suis, pemutus litar, transformer, gear suis dan kebersihan semua bilik Voltan Tinggi, Voltan Rendah, MSB dan bilik penjana.
• Untuk berhubung dengan penyedia utiliti dan badan kawal selia seperti TNB dan Suruhjaya Tenaga mengenai isu perkhidmatan utiliti dan pematuhan.
• Bertanggungjawab sebagai pengecas tegangan tinggi 11kv. Menyedia, merancang, menyelaras, melaksanakan & memantau pencegahan, ramalan, pemantauan keadaan dan penyelenggaraan kerosakan bekalan & pengagihan elektrik.
• Bertanggungjawab terhadap keselamatan dan pengendalian bekalan kuasa tegangan tinggi yang betul.
• Untuk menjalankan penyelenggaraan dan penyelesaian masalah kemudahan elektrik, mesin dan peralatan loji.
• Untuk berhubung dengan syarikat pengeluar sistem solar bagi menyemak garis panduan penyelenggaraan sistem tenaga solar dan sebarang isu pematuhan yang lain.
• Memantau dan merekodkan bacaan input dan output harian penjanaan kuasa dan penggunaan kuasa sistem solar serta menyediakan laporan kepada pihak atasan.
• Merancang, menyediakan, menyelaras, melaksanakan dan memantau senarai semak penyelenggaraan dan penyelenggaraan pencegahan sistem tenaga solar kilang.
• Untuk menjalankan pemeriksaan, pembaikan, penyelenggaraan pembetulan dan pencegahan untuk sistem tenaga solar termasuk semua bateri, panel solar, pendawaian dan sambungan, inverter, sistem panel kawalan, platform bumbung panel solar dan panel PV.
• Menghubungkan, menyelia dan memantau kerja-kerja kontraktor luaran dan memastikan semua kerja yang dijalankan oleh kontraktor mematuhi Akta dan peraturan Bekalan Elektrik.

Keperluan

• Sijil Profesional Kejuruteraan Kuasa Elektrik.
• Penjaga Elektrik BO 11kv.
• Kemahiran teknikal dalam Pengisi Voltan Tinggi.
• Pengetahuan komputer diperlukan – Microsoft Office.
• Kemahiran interpersonal yang baik dan minda analitikal.
• Sanggup bekerja di Pasir Gudang, Johor.

Calon yang berminat digalakkan untuk memohon secara dalam talian / bertulis / emel dengan resume yang lengkap berserta gambar yang tidak akan dikembalikan, menyatakan gaji yang dijangkakan dan semasa, nombor telefon untuk dihubungi ke:

Jabatan Sumber Manusia & Pentadbiran,

Pantech Stainless & Alloy Industries Sdn Bhd

PTD 204334, Jalan Platinum Utama

Kawasan Perindustrian Pasir Gudang, Zon 12B

81700 Pasir Gudang, Johor Tel: 607-251 8888

Emel: psa-hr@pantechssalloy.com

Faedah & Kebaikan

• Budaya terbuka
• Peluang pembangunan peribadi

Job Description

• Develop, maintain and generate smart scope programs for use in inspection, verification of production materials for incoming, outgoing, FAI and in-process parts.
• Work closely with the QA team to measure, examine and test molded part to identify defects and non-conformance to specification.
• Manage and maintain all measurement machine to ensure functionality and meeting production needs.
• Prepare and submit required report(s) or documentation ensure clear identification of product inspection status

Qualification :

• SPM / Diploma in any related field
• Able to read 2D or 3D drawings
• Good knowledge of measurement equipment such as smart scope, caliper, height gauge etc. is an advantage
• Good communication skill and able to communicate effectively with other function teams
• Able to work in a team and individually
• Able to work under the environment with fast tempo
• Good attendance and punctuality to work

Perks & Benefits

• Open culture
• Personal development opportunities

Job Descriptions:

• Provide on field technical assistance and service all small items, massage chairs, fitness products and other health related products.
• Make appointment with customers and arrange doorstep technical / customer service
• Respond promptly and address all customers’ cases within stipulated working days upon receiving the service request
• Conduct QC test on products and trouble shooting

Job Requirements:

• Possess at least a Diploma in Mechanical, Electrical or Electronic Engineering, preferable with a valid A0 Chargeman certificate.
• Candidates with at least two (2) years of working experience relating to outdoor servicing or Quality Control are encouraged to apply.
• Possess a valid license and willing to travel. Those with GDL license would be advantages.
• Mature, well organized with excellent customer service skills.
• Good command of both oral and written English and Bahasa Malaysia.
• Fresh graduates are encouraged to apply.
• Able to start work in short notice

Perks & Benefits

• Commission and bonus
• Medical insurance
• Personal leave
• Medical & Dental Benefit
• Birthday Leave

職位描述：

• 提供現場技術援助和服務，包括所有小型物品、按摩椅、健身產品和其他健康相關產品。
• 與客戶預約並安排上門技術/客戶服務
• 收到服務請求後，應在規定的工作日內及時回覆並處理所有客戶提出的問題。
• 對產品進行品質控制測試和故障排除

職位要求：

• 至少擁有機械、電氣或電子工程專業的文憑，最好持有有效的A0級主管證明。
• 歡迎至少兩 (2) 年戶外服務或品質控制相關工作經驗的候選人申請。
• 持有有效駕照並願意出差。持有GDL駕照者優先考慮。
• 成熟穩重，做事井井有條，具備優秀的客戶服務技能。
• 英語和馬來語口語和書面表達能力良好。
• 歡迎應屆畢業生申請。
• 能夠立即開始工作

福利待遇

• 佣金和獎金
• 醫療保險
• 個人休假
• 醫療和牙科福利
• 生日假

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Technician/Assistant Engineer
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operate and monitor equipment for surface treatment (e.g. UV-ozone or plasma), screen printing of conductive and dielectric inks, thermal curing, enzyme dispensing, and pattern cutting (e.g. laser or die cut).
• Maintain production records and documentation.
• Perform basic checks on product quality during production.
• Help improve processes and support pilot production runs.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• ITE – Higher Nitec or equivalent.
• Experience in printed electronics, screen printing, micro dispensing, or biosensor/flexible circuit manufacturing is a plus.
• Good attention to detail and troubleshooting skills.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78155 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description:

• Preparation of samples and standards for analysis
• Routine laboratory testing on environmental samples
• Operation and maintenance of instrumentation
• Ensure all works and reporting of results are in accordance with Quality, Work and HSE procedures and requirements

Requirements:

• Diploma/ Degree in Chemistry and related fields
• Candidate with experience is an added advantage
• Fresh graduate is welcome as training will be provided
• Good analytical skills and ability to work independently
• Able to start work on short notice preferred

Work location : 121 Genting Lane, ALS Building, Singapore 349572

Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Technician (Steel Fibre)
• Working Location: Gul Circle (6 minutes walk from CR24 MRT)
• Working Hours: 5.5 days (Mon-Fri 8am-5pm, Sat 8am-12pm)
• Salary Package: Basic Salary $2,500 + VB
• Duration: Permanent

Key Responsibilities

• Operate equipment to draw steel wire and produce steel fibers.
• Maximize efficiency by optimizing raw materials and consumables like wire rods, dies, and lubricants.
• Help prepare Manufacturing Procedure Specifications (MPS) and Quality Control Plans (QCP) for different products.
• Assist in developing a Maintenance Plan for the facility.
• Support product testing and identify necessary changes to meet product standards.
• Maintain and replenish raw material and consumable supplies to ensure ongoing production.
• Collaborate with the sales team to align delivery requirements with production capacity.

APPLY NOW!!!

• Completion of Secondary 4, GCE ‘N’ or ‘O’ levels, or ITE in Engineering (Electrical, Mechanical, or Mechatronics) is preferred.
• Familiar with operating and maintaining machinery.
• Knowledge of wire drawing consumables like dies and lubricants.
• Experience with steel wire drawing equipment and butt welding equipment for joining wires is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74827 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• 5 working days
• Location at Gul Circle
• Transport Provided
• OT + AWS + Variable Bonus + Yearly Increment

Responsibilities:

• Oversees and executes repair, maintenance, and troubleshooting operations in both outdoor and indoor environments.
• When outdoor repairs are not required, tasks are performed within the company workshop.

Qualifications:

• Degree, Diploma, or Certificate in Electrical and Electronic Engineering, with knowledge of AC & DC motors, single-phase and three-phase systems, lead-acid and lithium batteries, electrical control circuits, and hydraulic systems.
• Experience in customer support.
• Strong teamwork and communication skills.
• Possession of a driving license will be an advantage.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

JOB QUALIFICATIONS:

·       High school diploma or equivalent qualification required, associate or bachelor's degree preferred.

·       Proven experience in an administrative support role, preferably in an educational or virtual work environment.

·       Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) and virtual communication tools (e.g., Zoom, Microsoft Teams).

·       Excellent organizational and time management skills, with the ability to prioritize tasks, meet deadlines, and adapt to changing priorities.

JOB DETAILS:

·       Perform and Assist in coordinating maintenance, repairs, cleaning, and overall facility upkeep.

·       Work with the Facilities Officer on issues like air conditioning and power failures.

·       Support event setup, logistics, and school operational activities.

·       Ensure cleanliness and organization of rooms and secure doors before leaving as per NEA checklist.

·       Manage inventory of supplies, assets, and equipment(including Vending Machine)

·       Control inventory, order supplies, verify deliveries, and manage stock movement.

·       Handle filing, scanning, and printing of documents; communicate professionally; monitor report submissions; perform ad-hoc tasks.

·       Assists in processing access cards request to building management.

·       Prepare, pack, and endorse orders (both internal and external) ; assist with annual distribution.

·       Actively contribute ideas to enhance service levels.

The Job:

• Lead and develop a team of maintenance and call back technicians, train, assess, optimise the resources
• Perform the yellow belt technical assessment for the technicians and guide green and red belters to be prepared for their assessment
• Coordinate subcontractor works and audit their work quality standards
• Carry out feasibility study, health checks and standardization project
• Provide technical support for internal staff from Service, Project, Sales and Sales Engineering Department

Interested applicants can send their detailed resumes to janelui@recruitexpress.com.sg or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

The junior engineer is report to a design engineer and assisting the engineer to complete the production drawings, to develop from concept to detailing. Thereafter, the junior engineer will follow through the project from project time schedule, ITP and liaise with customer for the FAT and SAT.

The drawings are the main line of communication to our production foreman welders, and quality department to fabricate all deck machinery.

Required Skill Sets

· Proficient in AutoCAD / Solidwork to develop fabrication drawings

· Diploma or equivalent education and experience in any discipline

· Fresh diploma holder during the keystone project involve in design and hand on process to the products or during the internship in engineering firm is encourage to apply the post.

· Must have basic computer skills. (Word, Excel, Record-keeping software, Outlook, etc.)

· Ability to organize and prioritize work load

Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic, other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will be commensurate with skill and experience

5 days' work week