Total 95 software test engineer job vacancies in bayan lepas

Key Responsibilities

• Develop, implement, and monitor cleanroom environmental surveys, to verify compliance and support area buy-off.                             
• Develop and execute contamination sampling plans for cleanroom environmental, equipment, tools, and process samples to ensure cleanliness and prevent yield-impacting defects.                            
• Perform routine and event-based environmental and equipment sampling to support operational readiness and cleanroom classification.                                
• Manage handling and qualification of cleanroom indirect materials by setting cleanliness criteria, performing inspections, and approving materials for use.                                   
• Define cleanroom protocols, including gowning, behavior, and contamination prevention practices, and provide training to ensure compliance.                                   
• Define and coordinate with laboratories implement test plans, analyse cleanliness data, investigation deviations, and recommending mitigation actions for product & process cleanliness compliance.    
• Collaborate with cross-functional teams in production, facilities, quality, and engineering to support contamination control strategies and maintain acceptable cleanliness levels.

BROAD FUNCTIONS :

• To plan, coordinate and follow-up sputter systems start-up / conversion activities and process documentation.
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process related issues trouble shooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time), yield & quality goal.
• To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise and coach/train process tech, include engineering specialist and characterize technicians.

RESPONSIBILITIES :

Regular

• Responsible for sputter process related issues trouble shooting (common causes), work closely with Shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time) & quality goal.
• Responsible to lead, supervise and coach/train process tech, include engineering specialist and characterize technicians. Responsible to train and share PMR/DS sputter process and yield improvement knowledge with the team.
• Responsible for sputter parameters monitoring, include online SPC monitoring and procedure conformance.
• Responsible for sputter machine start-up include process characterize (new products & process changes).
• Responsible for new products/machines/process qualification.
• Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).
• Others include FMEA.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules

Irregular

• Responsible to assist in sputter yield related issues trouble shooting (common causes). Work closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.
• Other supervisor assigned task
• Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization. Responsible for new product qualifications.  

The Senior Packaging Engineer will lead packaging development and qualification activities for WD's HDD and Flash storage products. This is a technically hands-on and cross-functional leadership role — you will mentor junior engineers, drive complex packaging programs, and interface directly with customers, suppliers, and global engineering teams.

You are expected to operate with high autonomy, make independent technical decisions, and represent the Packaging Engineering function in NPI and sustaining programs.

Key Responsibilities : 
Technical Leadership

• Lead end-to-end packaging design, development, and qualification for complex HDD/Flash programs
• Define packaging architecture and material strategy for new and sustaining products
• Make independent technical decisions on packaging design trade-offs (cost vs. protection vs. sustainability)
• Act as Subject Matter Expert (SME) for packaging within cross-functional teams

Design & Qualification

• Own packaging qualification plans and test execution per ISTA/ASTM standards
• Review and approve packaging specifications, BOMs, and qualification reports
• Lead Engineering Change Orders (ECOs) and deviation requests
• Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) reviews

NPI & Program Management

• Lead packaging workstream for NPI programs from concept to mass production
• Manage packaging milestones and deliverables within program timelines
• Interface with global product teams, customers, and contract manufacturers

Vendor & Supply Chain

• Develop and qualify new packaging suppliers in Malaysia/ASEAN
• Lead supplier performance reviews and cost negotiation
• Drive packaging cost reduction (cost down) initiatives

People & Mentorship

• Mentor and coach junior/mid-level packaging engineers
• Conduct technical reviews and provide guidance on complex issues
• Support team capability building and knowledge sharing

Compliance & Sustainability

• Ensure all packaging meets regulatory requirements (RoHS, REACH, ISTA)
• Champion WD sustainability goals through eco-packaging innovation
• Maintain quality documentation per WD QMS standards

Continuous Improvement

• Lead RCCA for field packaging failures and damage incidents
• Drive Lean/Six Sigma improvement projects within packaging function
• Benchmark industry trends and propose technology upgrades

To work on the following tasks with guidance:
1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team
accordingly to following requirement:
a. To track project budget and ensure equipment cost within the planed budget.
b. On time delivery of test systems to the production line according to project milestone (include
manage of equipment, hardware interface and mechanical jig and fixture purchase)
c. Release the test system according to Test System Release Procedure.
d. To train and coach maintenance team to be able to handle test system breakdown more
effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target.
(eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System
Setup guideline and test fixture and job design concept)

2. To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:
• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine
efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling
from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training, and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support systems comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

As a Test Process Engineer, you will be responsible for sustaining, optimizing, and continuously improving the testing of the sputtered disks for the hard disk media manufacturing. This role supports high-volume manufacturing by ensuring stable test performance, strong process capability, high yield, and compliance with quality standards. You will work closely with Operations, Equipment, Quality, and R&D teams to drive data-driven improvements and support new technology introductions.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Troubleshoot and resolve Test cell yield issues to maintain product quality and throughput.
• Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.
• Monitor key process input variables (KPIVs) using tools such as the KPOV database, Maintenance Logs and the Digital Preventive Maintenance system.
• Drive and support equipment and process upgrade and continuous improvement projects to enhance performance and efficiency.
• Act as an upskilling trainer for test equipment/process, providing technical training and guidance to team members.
• Ensure compliance with ISO standards and documentation practices.
• Responsible for set up new measurement method which required from R&D and test process team.
• Measurement results (KPOV) analysis in PN.
• Coaching process engineer/technician to enhance their knowledge of instrument method and capability

As a Test Equipment Engineer, you will be responsible for sustaining, optimizing, and continuously improving the testing equipment for sputtered disks used in hard disk media manufacturing. This role supports high-volume manufacturing by ensuring stable test performance, strong equipment capability, and compliance with quality standards. You will also be responsible for test capacity planning and expansion, monitoring critical parameters related to test capacity and PPH. In addition, you will drive overall test-related projects to meet departmental objectives. The role includes managing equipment transfer and buyoff for new hardware and software enhancements, as well as installing and setting up test equipment such as testers, robotic automation systems, bagging systems, and conveyors. Ensuring test measurement accuracy and repeatability is also a key responsibility. You will work closely with Operations, Process, Quality, and R&D teams to drive data-driven improvements and support new technology introductions.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Troubleshoot and resolve test cell equipment issues to maintain product quality and manufacturing throughput.
• Transfer and implement test-related projects into production. Conduct investigations for quality incidents related to test equipment, and support root cause analysis and corrective actions.
• Monitor key equipment input variables (KPIVs) using tools such as the KPIV database, maintenance logs, and the Digital Preventive Maintenance system. Drive and support equipment and process upgrades, as well as continuous improvement initiatives, to enhance performance and efficiency.
• Improve and optimize test equipment to enhance quality, utilization, and PPH (Parts Per Hour). Act as an upskilling trainer for test equipment and processes by providing technical training and guidance to team members.
• Ensure compliance with ISO standards and proper documentation practices. Support the setup and implementation of new measurement methods required by the R&D and test process teams.
• Perform measurement results (KPOV) analysis in PN and coach process engineers and technicians to strengthen their knowledge of instrument methods and equipment capability.
• Follow all safety and health regulations and workplace requirements.

• Job Summary:
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

The goal is to enhance the HAMR Glass media cleaning process for both current and new products by focusing on improvements in quality, cost, and production rate (PPH). This includes ensuring a smooth transition for new products from GO, establishing quality indicators for the cleaning process, and acquiring and qualifying a new cleaning system for mass production.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Continuous effort to develop/improve the cleaning process for HAMR Glass to meet the organization's goals and objectives for current and future new products.
• Execute and qualify new cleaning materials such as filters, chemicals, and brushes for the cleaning machine to align with the company's goal of having 2nd source for all materials.
• Work closely with the GO R&D team on the new cleaning process and ensure seamless product transfer to PN media.
• Execute cleaning machine pph and utilization improvement activities to meet sputter pph and product demand.
• Develop a new cleaning process in PN for new products that are introduced for mass manufacturing, because this machine is not available in GO.
• Focus on the latest Ultrasonic and Megasonic cleaning technology to tap the opportunities to introduce new sonication technology into current cleaning tools to improve cleaning efficiency.
• Align cleaning improvement activities with Manufacturing Engineering team objectives of sustaining and improving media yield and quality.
• Execute cleaning cost-saving activities to meet the company's CPD target.
• Sustain the cleaning process by sustaining in process indicators such as chemical concentration and media cleanliness particle counts.
• White paper, technical report, and documentation (SMO, TECN & PECN) write-up to ensure a smooth implementation of the new cleaning process following the ISO14000, ISO9000, OHSAS 18001 procedure.
• Leading Failure Mode Effect Analysis (FMEA) for the cleaning process and executing improvement actions to improve the robustness of the cleaning process for manufacturing.
• Work with the substrate team ( SWK ) (Front End NPP substrate team) to qualify new HAMR Glass substrate or improve substrate quality at the media level.
• Continue to build up technicians technical capability pertaining to cleaning process.
• Set up auto shutdown fixture to prevent the cleaning machine from producing bad quality parts.
• Set up auto shutdown to prevent the cleaning machine from producing bad quality parts.
• Preparing and updating Weekly Asia Cleaning Team Activities progress report.
• Follow all safety and health rules and contamination control.
• Conduct technical sharing on the topics related to media cleaning.
• Work with EHS team to set up a safety feature to prevent any accident in the work place.
• Work with vendors/suppliers for new process and new materials development.
• Work with procurement/SQE team for cleaning material quality improvement and inventory control.

The packaging scope includes various items such as labels, bags, foil bags, printer ribbons, cartons, and media storage, with a focus on maintaining quality, qualifying new materials, and collaborating with suppliers and teams globally. Responsibilities involve defining monitoring methods, managing packaging specifications, reacting to customer feedback, and ensuring smooth communication with quality assurance, supply chain, and production teams for ongoing engineering developments and annual requests for quotes.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Packaging scope covers cassette, cleanroom & non-cleanroom label, LPPE & HDPE bag, Foil bag, printer ribbon, carton box, pallet cover & sleeve, media storage requirement, and customer complaint-related issues.
• Maintain packaging quality and define the monitoring method.
• Qualify new packing material and implementation.
• Responsible for working with new/old suppliers, SQE, material lab, Planer, GCM, and Operation SPI on any engineering development of packaging material.
• Collaboration work with the WW packaging team (PN/SZ/GO).
• Maintain all packaging SOW for GCM and SQE to work with the vendor for getting yearly RFQ, sharing material, & Lab test spec.
• Maintain packaging material masterlist (Cassette & Label), example cassette & Label drawing, part number, artwork/component drawing.
• Responsible for reacting to react, resolving any customer feedback related to packaging matters with QA, SQE, and production.