Total 21,849 Others process development engineer job vacancies in Australia

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Responsibilities

• Responsible for set-up and optimization of new device qualification, engineering lot processing, process data gathering and reporting
• Monitor and improve device yield performance and process SPC charts
• Investigate and troubleshoot production downtime and quality issues to provide lot disposition on outlier lots
• Perform engineering report and documentation such as 8D, DMAIC, FMEA, CP, Process Specification, Work Instructions, etc
• Implement continuous improvement program (CIP) to support yield and cost improvement, including developing systems for workflow management
• Facilitate training of manufacturing personnel on operating procedures and process specification
• Work closely with inter-department to improve process and equipment performance and capability
• Coordinate and communicate with customers for any process engineering related matters
• Setup systems and NPI requirements, handles qualifications and engineering activities

Requirements

• Diploma / Degree in any Engineering Discipline
• Working experience in semiconductor assembly manufacturing or process engineering and pre-assembly processes (Backgrind, Laser Marking, Laser Groove, Wafer Dicing) is an advantage
• Knowledge in SPC, DOE, FMEA, OCAP, Control Plan, WI and Process Specification
• Clear and effective communication with customers, suppliers and cross department
• Able to multi-task and support ad-hoc projects in process and equipment related activities
• Entry level candidates are welcome to apply

Position Summary

QA Engineer (Process Quality Control) is responsible to develop & deploy inspection procedures to ensure conformance of material to be released. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Responsible for backend semiconductor packaging processes which ball drop, bumping, singulation, back grind and mounting.
• Effectively providing engineering support in order to meet production output, product quality, efficiency, productivity, yield, cycle time and safety requirements.
• Responsible to analyse the process data and identify improvement actions and work on the improvement.
• Drive permanent solutions to resolve chronic process and quality issues.
• Responsible to evaluate new product/material/process during the pilot run and ensure process readiness.
• Responsible for the relevance of the Work Instructions, Control Plan, FMEA & Process Control documents.
• Responsible to prepare the line for internal & external audits and the follow-up actions.
• Any other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Engineering (Mechanical, Electrical, Materials, Chemical, or related field).
• Prior experience in semiconductor packaging processes (ball drop, bumping, singulation, back grind, mounting) would be advantageous.
• Experience in process engineering, yield improvement, and quality control.
• Proficiency in data analysis and statistical process control (SPC).
• Familiarity with Failure Mode and Effects Analysis (FMEA), Control Plan, and Process Control documentation.
• Hands-on experience with new product/material/process evaluations.
• Ability to work in a fast-paced manufacturing environment.

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

• Analyze SPC charts. Understand the rules and their significance. Perform proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Use JMP and Klarity ACE to analyze split lot, DOE data, and sort yield.
• Upload recipes using RMS, check recipes, and ensure recipe content compliance.
• Follow up on 3L5W, MRB, 8D, TECN, or update specifications through ECN. Provide guidance to junior engineers.
• Set up and troubleshoot issues in recipes/job files in all metrology tools within the module.
• Act as a process engineer for new equipment acceptance. Understand the concept of repeatability and reproducibility (R&R) run.

Requirements:

• PhD/Master/ Degree in Electrical/Electronics/Microelectronics/Chemical Process/Chemistry/Physics
• Excellent team player with good interpersonal, communication, and written skills
• Strong logical thinking capability and good analytical skills
• High level of integrity, commitment, with good ownership and accountability
• Able to adapt in a fast-paced environment and work under pressure
• Proficient in MS Office applications like Excel, PowerPoint, PowerBI

Job Summary

We are seeking a skilled Software Development Engineer to design, develop, and maintain scalable software solutions. The ideal candidate will work closely with cross-functional teams to deliver high-quality applications that meet business and client requirements.

Key Responsibilities

• Design, develop, test, and deploy software applications and systems

• Write clean, efficient, and maintainable code following best practices

• Collaborate with product managers, business analysts, and other developers to define system requirements

• Troubleshoot, debug, and enhance existing software

• Participate in code reviews to maintain code quality and consistency

• Develop and integrate APIs and third-party services

• Ensure application performance, scalability, and security

• Prepare technical documentation and system design specifications

Requirements

• Bachelor’s degree in Computer Science, Software Engineering, or related field

• Minimum 3–8 years of software development experience (adjust based on seniority)

• Proficiency in one or more programming languages (e.g., Java, Python, C#, JavaScript)

• Experience with frameworks such as Spring Boot, .NET, or Node.js

• Familiarity with databases (SQL / NoSQL)

• Experience with version control tools (e.g., Git)

• Understanding of software development lifecycle (SDLC) and Agile methodologies

• Strong problem-solving and analytical skills

Preferred Qualifications

• Experience with cloud platforms (AWS, Azure, or GCP)

• Knowledge of microservices architecture and RESTful APIs

• Familiarity with DevOps practices and CI/CD pipelines

• Experience in financial services or fintech industry (if relevant)

Purpose of the Position

• Support for the Operational readiness of the plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 5 years Operational experience with demonstrable exposure to process plant operations and site-based activities in petrochemical/gas/chemical industry.

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Responsibilities:

• Improve and sustain processes to meet operational goals
• Monitor and control process performance indices
• Ensure quality targets at all critical nodes
• Use quality tools to enhance processes
• Resolve out-of-control issues and determine lot disposition for out-of-spec cases
• Troubleshoot process issues, establish CAS and specs and collaborate on recipe creation
• Oversee SPSR, MRB, TECN status and follow-ups
• Partner with equipment and manufacturing engineers to achieve module goals
• Work with internal/external customers to boost yield and quality
• Drive productivity via process changes, capability documentation, and equipment optimization
• Characterize and develop new equipment processes
• Organize training to upskill AEs/Technicians

Requirements:

• Master or Degree in Electrical, Electronics, Mechanical, Chemical Engineering or Honors in Physics/Chemistry
• 4–8 years of working experience related to Section Head role, preferably in a manufacturing environment
• Technical understanding of manufacturing processes, equipment, and automation systems
• Strong interpersonal, teamwork and analytical skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to engg1@talenttradersg.com

EA License No: 13C6305

Reg. No.: R24121656 (CHEN JING WEI)

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work (Day or Night shift)

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume via email to hr@tempserv.com.sg

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Process Engineer (CNC Machining) - Milling/Turning/EDM/Lathes

• Up till $6500 Basic + AWS + Variable Bonus
• Monday-Friday, 7.30am-5pm
• Location: Pioneer (transport provided)
• 3 years of experience in CNC machining or related processes

RESPONSIBILITIES:

• The Process Engineer (Machining) will be responsible for industrializing machining processes (includes CNC mill/turn, EDM, lathes) for gas turbine component repairs.

• This role includes the implementation and qualification of new equipment and technologies, as well as driving continuous process improvement initiatives.

• Industrialize machining processes for new and existing products - Qualify CNC milling/turning, EDM, lathes, and other machining processes to ensure they meet specifications and quality standards.

• Collaborate with cross-functional teams to optimize machining processes for manufacturability and cost-effectiveness.

• Ensure all machining processes adhere to Safety, Quality, Delivery, and Cost (SQDC) standards.

• Monitor and report on key performance indicators (KPIs) related to machining processes.

• Implement corrective actions to address any deviations from SQDC standards.

• Lead risk reduction and quality improvement projects to enhance machining processes.

• Drive productivity and sustainability projects to reduce waste and improve efficiency.

• Utilize Root Cause Analysis (RCA) tools and methodologies to solve complex problems.

• Provide technical guidance, training and support to machining operators and technicians.
  

REQUIREMENTS:

• Bachelor degree in Mechanical Engineering from a recognized university.

• 3 years of experience in CNC machining or related processes

• Knowledge of gas turbine component repair is advantageous.

• Familiarity with tooling selection, fixture design, CAD, CAM, and metrology.

• Proficiency in reading and interpreting engineering drawings and specifications.

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Responsibilities:

• In charge of establishing the process and work in the team to implement risk management best practices in projects
• Implement and maintain the office's ISO 13485 and IEC 62304 compliant quality management system processes and procedures across departmental work and projects.
• Responsible in providing guidance and development support to the projects handled
• Taking charge of validating and advising project teams on regulatory, quality and risk requirements
• In charge of implementing and maintaining ISO 13485 and IEC 62304-compliant quality management system processes and procedures
• Responsible in
• In charge of managing project tasks which includes ensuring of timely completion of project milestones and meeting KPIs
• In charge of compliance with quality, regulatory and organisational policies and systems while supporting required record-keeping and documentation.

Requirements:

• Min Degree in Engineering /Science or relevant
• Min 2 years of working experience in QMS, Risk Management and design & development in medical industry
• Experience in ISO13485 /IEC62304 audit is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900