Total 2,953 Quality Assurance / Control job vacancies

- Obtain immediate containment, root cause and corrective action(s) on defects discovered at incoming inspection / manufacturing floor.

- Work closely with Buyers and Vendors to close out defect cases

- Drive internal corrective action with immediate disposition for defects deemed responsibility.

- Drive continuous improvement throughout supply base to meet quality and corporate goals.

- Perform supplier assessments and audits as required by audit plans.

- Guide new vendors and enforcing requirements to meet world class Quality standards

- Provide presentation materials for the following meetings: Board of Directors, Quality, Supplier and Manufacturing.

- Hold Quality Performance Review with vendors

- Make MRB decisions and drive immediate actions by working with responsible engineers.

- Responsible for measuring and hiting all inspection metrics including incoming defect rate,

ship to stock rate, inspection backlog and SCAR metrics.

- Responsible for Quality performance to Goals 5S/Safety requirements.

- Responsible for departmental compliance to division’s ISO9000 Quality System and all associated procedures, including engineering drawings, assembly and test procedures, etc.

- Responsible for the assessment, development and execution of inspection schedules in accordance with company requirements

- Manage safety reporting for the department.

- Well versed in inspection techniques in order to perform first article inspections and production validation of piece part components and assemblies during source inspection

- Familiar with inspection equipment from vernier to complex CMM layout inspection to perform source inspection at vendor’s site where necessary

- Electrical / electromechanical experience preferred

- Experience in driving quality improvement for mechanical commodities such as machining, sheet metal, frames or consumables

- Experience in driving quality improvement for electrical commodities such as PCBA, box build, cable & harness

- Able to interpret complex mechanical & electrical drawings and geometric tolerancing

Interested candidates, please email your resume to annasee@recruitexpress.com.sg

Anna See Sing Yee

CEI Reg R25157535

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted

Job Description:

• Perfrom X-Ray / FPI Inspection on aircraft engine components.
• Interpret work instructions and to make decisions on acceptance / rejection of parts.
• Work on written instructions , operations sheets, SOP , engineering drawings and quality proceedures using X-Ray / FPI NDT Methods on aircraft enfine components to locate discontinuities.
• Set up and calibrate non-destructive testing equiptments and perform daily system check.
• Use NDT inspection methods to ensure maximum quality of products, defects and review test orders to determine type of test required, test procedures and part acceptability criterial.
• Participate in CIP projects, audit preparations and process reports for corrective actions.
• Comply with all company safety rules and regulations.

Job Requirement:

• Min "O" Levels or equal
• Willing to be based in Singapore
• Strong hands on RT experience is a must
• Experience level requirments: NAS 410/ EN 4179 or relevant Certification in X-Ray (RT/ FPI/ MT/ PT)

To submit your application, please apply online to apply@rn-care.com or call +(65) tel:6513 56976514 9838tel:+(65) 6514 9838for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: QC Technician
• Working Location: Loyang
• Working Hours: 5 days (Mon - Fri, 8.00am - 5.45pm)
• Salary Package: Basic salary up to $2,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Prepare and submit first article samples for approval.
• Create packaging specifications.
• Develop inspection plans for products.
• Support inspection processes for in-process, incoming, and outgoing parts.
• Train inspectors and operators on quality check points and measurement methods.
• Work with Production, Toolroom, and Suppliers to address quality issues.
• Ensure documents and records comply with ISO quality standards.
• Assist Engineers as needed.
• Manage and maintain all measuring and testing equipment.
• Help Engineers update monthly quality control reports, such as supplier performance.
• Assist Engineers or Managers in collecting and compiling data for reports.
• Support other quality-related tasks as required.

APPLY NOW!!!

• Minimum 2 years of relevant experience.
• Able to read engineering drawings.
• Good reporting and administrative skills.
• Able to work independently with minimal supervision.
• Experience with OGP Smartscope, CMM, or other measuring tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75340 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Major Responsibilities:

• Perform biochemistry, analytical and raw material of in-process and marketed products for lot release in accordance with quality standards and procedures.
• Responsible for housekeeping duties in the lab. Perform Quality Tag Out for laboratory equipments such as freezer, water bath and etc.
• Support laboratory operations including but not limited to method transfer, equipment qualification, calibration, cleaning and maintenance, purchase and receipt of reagents and consumables, waste management, reagent and media preparation, critical reagent management and document management.
• Review lot release data, identify testing discrepancies and participate in laboratory investigations.
• Participate in inspection and ensure that the laboratory and documents are in a constant state of regulatory compliance and inspection readiness.
• To assist in writing SOP documents, Change plan or change records (document revisions) supporting continuous improvement of test procedures and assay sheet design.
• To carry out completion and review of GMP Documentation of data sheets or LIMS software.
• To carry out QC sample receipt, assay and release procedures.
• Support Audit preparation and any audit related activity
• Reading and understanding the test procedure and the requirements per USP, JP and EP.

Qualifications:

• Bachelor of Science majoring in Chemistry, Biochemistry or related scientific degree

• At least 1-3 years relevant experience depending on qualification, preferably in the bio-pharmaceutical / Pharmaceutical industry

• Good working knowledge of cGMP and regulatory requirements related to Quality is preferred

• Knowledge of cGLP / cGMP, FDA, EMA and ICH guidance’s and industry standards for analytical development and characterization.
  

  Interested applicants, please email your updated CV to rachel.lim@recruitexpress.com.sg or WA 97527630 for more information.

  We regret to inform that only shortlisted candidates will be contacted.

  EA Personnel No: R23116144

  EA Personnel Name: Lim Ruo Yi, Rachel

  Company EA license No.: Recruit Express Pte Ltd (99C4599)
  

Job Description

• Industry/ Organization Type: Engineering
• Position Title: QC Technician
• Working Location: Tampines
• Working Hours: 5.5 days (Mon to Fri 9AM – 7PM, Sat 9AM – 1PM)
• Salary Package: Basic Salary up to $2,200 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform in-process, final, and incoming inspections of precision parts using measurement tools such as calipers, micrometers, height gauges, and CMM machines.
• Carry out dimensional and visual inspections to ensure products conform to engineering drawings and customer specifications.
• Record inspection results accurately on quality forms and maintain proper documentation for traceability and audits.
• Detect and report non-conformities or defects, and assist in root cause analysis and corrective actions.
• Ensure adherence to quality procedures, work instructions, and safety standards throughout the production process.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum 1 year working experience in related field
• Candidates with Mechanical Engineering background are preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #77167 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Position Overview

We are looking for an experienced Test Engineer with a strong background in software quality assurance and Agile delivery. The ideal candidate will play a key role in designing, executing, and enhancing test strategies across the development lifecycle to ensure delivery of high-quality, reliable, and secure software products.

You will collaborate closely with developers, product owners, and stakeholders to promote a “test early, test often” approach and maintain quality throughout the Agile process.

Key Responsibilities

Quality Engineering & Test Design

• Design, develop, and execute comprehensive test strategies, plans, and test cases across the Agile development lifecycle
• Create test cases based on acceptance criteria to ensure features meet defined quality standards

Testing & Automation

• Perform both manual and automated testing (functional, integration, system, and UAT)
• Contribute to the development and maintenance of automated test scripts and frameworks
• Support continuous testing within CI/CD pipelines

Defect Management

• Identify, document, prioritize, and track defects through resolution
• Collaborate with developers to troubleshoot issues, validate fixes, and ensure timely closure

Agile Collaboration

• Work closely with Agile teams to ensure continuous testing within each sprint
• Partner with product owners and developers to ensure quality is embedded early in development
• Support UAT activities including test preparation, execution, and validation

Documentation & Reporting

• Maintain clear and structured test documentation, including test plans, test cases, and defect reports
• Ensure test evidence and logs are properly recorded and audit-ready

Job Requirements

• Bachelor’s Degree in Computer Science, Information Systems, Engineering, or related field
  (Extensive relevant experience may be considered in lieu of formal qualifications)
• Minimum 5 years of experience in software QA/testing within Agile environments
• Strong experience in manual and automated testing (unit, integration, system, UAT)
• Hands-on experience with test automation tools such as Selenium, Cypress, JUnit, TestNG, or similar
• Familiarity with Agile methodologies and CI/CD pipelines
• Strong collaboration skills with developers, business analysts, and stakeholders
• Excellent documentation skills with high attention to detail in test plans, test cases, and defect reporting

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to bianca@talentsis.com.sg for immediate processing.

(EA Reg No: 20C0312)

Job Responsibilities

• Ensure organizational compliance with internal policies, regulatory requirements, and corporate governance standards.
• Conduct financial and non-financial compliance audits, including reviewing internal control processes.
• Identify, analyze, and mitigate compliance risks, and monitor adherence to company policies
• Manage Anti-Bribery and Anti-Corruption initiatives, including coordinating training and employee awareness programs.
• Support the development, implementation, and review of company policies and compliance frameworks.
• Liaise with insurance brokers for annual policy renewals and assist in managing insurance claims.
• Coordinate and communicate with China HQ on corporate announcements, notices, and reporting requirements.
• Assist in the preparation of quarterly and annual reports for headquarters.
• Collaborate with cross-functional teams to enhance compliance processes and internal controls.
• Provide regular updates and reports to senior management on compliance matters.

Job Requirements

• Bachelor’s degree in Accounting, Audit, Risk Management, or a related field.

• Minimum 1 year of relevant experience in accounting, audit, or risk management; fresh graduates with relevant qualifications are welcome to apply.

• Strong analytical and problem-solving skills with the ability to assess risks and recommend solutions.

• High level of integrity, strong work ethics, and meticulous attention to detail.

• Good organizational and reporting skills with adetail-oriented mindset.

• Effective communication and interpersonal skills to engage stakeholders across all levels.

• Ability to work independently as well as collaboratively in a team environment.

• Proficiency in data analysis tools or compliance monitoring systems is an added advantage.

• Proficient in both English and Mandarin, with the ability to communicate effectively and prepare written reports in both languages.

About Ramboll

Ramboll isa leading engineering, design and consultancy company founded in Denmark in1945. The company employs more than 13,000 experts globally and has especially strong representation in the Nordics, UK, North America, Continental Europe, Middle East and Asia-Pacific. With 300 offices in 35 countries, Ramboll combines local experience with a global knowledgebase constantly striving to achieve inspiring and exacting solutions that make a genuine difference to our clients, the end-users, and society at large. Ramboll works across thefollowing markets: Buildings, Transport, Planning & Urban Design, Water,Environment & Health, Energy and Management Consulting. More information available at www.ramboll.com. Follow us on LinkedIn, Facebook and Twitter.

Working at Ramboll

To work at Ramboll means being part of a people organization. We are focused on knowledge sharing and collaboration across competence areas and geography, and we aim for a strong diversity among our employees. This enables us to solve a broad range of projects, and we firmly believe that cross-collaboration leads to creative and longstanding solutions. Thus, the possibilities at Ramboll are many and diverse – we invest a lot in development of people and offer career paths tailored for each individual.

Job Description
Ramboll is part of an EPC project, where we are working as client’s engineer for the EPC contractor located in Singapore. The Automation Engineering Lead will act as a representative for the EPC contractor during design execution at EPC contractors’ office in Singapore.  

In your role as Automation Engineering Lead / Manager, your focus will be to ensure that the installation and commissioning of the SCADA system, Telecom systems, Fire Alarm System and instrument/control portion of the mechanical systems adhere to the technical requirements and the design already developed by the engineering contractor. As such, it will be your responsibility to follow up on progress, site queries non-conformance, SAT and commissioning activities and facilitate minor adjustment as needed and daily technical clarifications. In doing so, you shall collaborate closely with representatives from the EPC contractor, the fabrication contractor, the engineering contractor, Suppliers and other disciplines and representatives from the client as required.

• Visit the fabrication yard and provide reliable information to the project manager regarding significant technical issues, particularly risks.
• Shall be integrated into the EPC engineering team.
• Collaborate closely with the fabrication yard representatives, the engineering design office, client’s home office and other discipline representatives at the fabrication yard.
• Where required, liaise and coordinate Automation tasks with Suppliers, EPC Contractor and other disciplines.
• Troubleshooting / solution finding during fabrication.
• Shall propose a solution, including supporting documentation, to any design issues, flaws, or gaps in the contract requirements. These shall be agreed upon with Company before implementation.
• Coordinate automation engineering tasks as needed during execution.
• Follow up on progress and evaluate / oversee quality from the EPC contractor.
• Review costs for change orders, and progress claims when required.
• Interact with clients and stakeholders on technical solutions to ensure the best solution and in the client’s best interest.

Job Qualifications / Skills
You must have a result-oriented, proactive and systematic approach to your work. You enjoy working both independently and together with co-workers, from both the engineering team and the EPC team thus experience in both design and installation/commissioning is preferred. You will engage with multiple stakeholders during the execution; thus teamwork is essential to achieve results.

Your competencies:

• Have a bachelor’s or master's degree in automation, instrumentation, telecom engineering or similar.
• Have extensive experience in automation offshore engineering – preferably with offshore substation design and installation/commissioning – with a minimum of 10 years of experience combined with managing of complex engineering tasks.
• Comprehensive understanding of offshore OSS design standards and codes, Korean regulations are preferred (e.g. NFPA72, DNV-ST-0145).
• Have experience with typical OSS interfaces from design phase to procurement, vendors, shop preparations, materials, installation, layout, safety, cable routing, equipment tagging, numbering & marking, testing, and quality.
• Be familiar with standard OSS component vendors.
• Be familiar with the discipline interfaces and integration to other disciplines and systems.
• Speak and write English fluently.
• Have excellent communication skills, enabling you to convey complex technical information. 

Join the Construction & QHSE Department.

The primary focus areas of the department are the offshore wind and renewable energy solutions sectors. The department provides services for site activities, including Electrical &Automation follow-up engineering and supervision.

We represent a strong group of Engineers with comprehensive experience in the execution phase of the projects for Offshore Substations for Offshore windfarms. The current position is working as the EPC contractor representative at EPC contractors’ office. A contract period of 5 months is currently foreseen with an estimated start onsite from May 2026 to September 2026.

This is a full-time trade compliance analyst role based in Malaysia to support day-to-day trade compliance execution activities. The role is highly process-driven, focusing on accurate, timely execution of routine trade compliance tasks to support ongoing business operations. The role is designed to support trade operations through accurate, consistent execution of established compliance processes. The role involves regular interaction with internal stakeholders and systems and includes administrative and data-management responsibilities. The successful candidate must be well-organized and detail oriented.

Job Specific Tasks and Duties

• Daily trade operations support including data entry, facilitating the execution of administrative activities,
• compilation of reports, and project-specific operations in accordance with established procedures and service‑level expectations
• Review transaction‑level information to ensure accuracy, completeness, and compliance with applicable requirements
• Identify execution issues, discrepancies, or exceptions and escalate in line with defined protocols
• Prepare routine operational reports, trackers, and documentation to support trade operations
• Perform administrative and data management tasks related to trade compliance workflows
• Carry out additional operational duties as assigned to support regional trade compliance activities

• An opportunity to join a leading global reinsurer
• 12 months contract (Open to part-time)

About Our Client

The employer is a well-established organisation in the reinsurance industry. They are a leading global reinsurance company that provides life and non‑life risk coverage to insurers worldwide through its Property & Casualty and Life & Health segments.

Job Description

• Supporting the implementation and ongoing management of the regional Compliance Program.
• Contributing to group‑wide compliance initiatives and projects.
• Providing support across key compliance activities:Anti‑Money Laundering and Counter‑Terrorism Financing (AML/CFT)Anti‑Bribery MeasuresAnti‑Fraud Controls (in collaboration with Risk)Management of Conflicts of Interest and Monitoring of Lobbying ActivitiesData Protection and Privacy ComplianceCompliance with Insurance Distribution Directive (IDD) Requirements
• Supporting the development and delivery of compliance training for the Group

The Successful Applicant

• Prior compliance experience within Financial Services industry
• Insurance or reinsurance work experience is a plus

What's on Offer

• Part-time, temporary role offering flexibility and work-life balance.
• Opportunity to gain valuable experience in the Risk & Compliance department of the insurance industry.

Contact

Ginny Teo (Lic No: R22104515/ EA no: 18C9065)

Quote job ref

JN-042026-6986105

Phone number

+65 6541 9926

Michael Page (Personnel) Pte Ltd | Registration No.201736642C

Job scope:

1. Incoming Inspection

• Conduct sampling and checking for incoming materials
• Verify supplier documents such as Certificate of Analysis (COA)

2. In-Process Quality Control

Monitor production processes 

Perform in-process checks such as:

• Filled weight & weight uniformity
• Disintegration
• Moisture Content
• Appearance checks
• Ensure adherence to SOPs and Good Manufacturing Practice (GMP) guidelines

3. Finished Product Checking

·      Perform finished product checking prior goods release

4. Lab test sample submission

·      Arrange for external laboratory testing collection

5. Documentation & Compliance

• Maintain QC records, batch records, and inspection records
• Ensure documentation complies with Good Documentation Practices (GDP)
• Participate in internal and external audits and inspections

6. Deviation & Investigation Handling

• Deviation reporting
• Assist in non-conformances, and customer complaints investigation
• Support corrective and preventive actions (CAPA)

7. Hygiene & Environmental Monitoring

• Monitor cleanliness of production and warehouse areas
• Conduct environmental testing (air, surface, water)
• Ensure proper cleaning and sanitation practices are followed
• Daily environmental monitoring
• Maintain good hygiene and cleanliness of QC sample retention & sampling room and In-process quality control room

8. Cross-Department Coordination

• Work closely with Production, Warehouse, and Purchasing teams
• Communicate quality issues and improvements
• Support product development and validation activities

9. Continuous Improvement

• Suggest process improvements to enhance quality and efficiency

10. Any ad-hoc duties assigned by superior

Key Skills Required

• Knowledge of GMP, HACCP, and quality systems
• Basic lab testing skills (pH, moisture content, disintegration test) is an added advantage
• Attention to detail and documentation discipline
• Problem-solving and investigation skills

Quality Assurance:

• Develop, implement and maintain quality assurance policies and procedures.
• Conduct audits and assessments to identify potential areas for improvement.
• Manage certification audits and maintain compliance including ISO Integrated System (9001, 14001, 45001) and Halal etc.
• Management Representative for ISO Integrated System    
• Collaborate with production/development teams to establish quality standards and ensure adherence to them.
• Monitor product/service quality metrics, analyze data, and provide reports to management.
• Track, investigate, and resolve customer complaints and product issues, implementing corrective and preventive actions as needed.
• Conduct risk assessments to identify potential quality-related risks and develop risk mitigation plans.

Product/Process Improvement:

• Identify opportunities for process improvements and contribute to continuous improvement efforts.
• Implement statistical tools and quality methodologies to analyze and improve processes.
• Collaborate with R&D or engineering teams to introduce new products or implement product changes with
• quality in mind.

Quality Control:

• Oversee the testing and inspection of products and processes to ensure quality standards are met.
• Develop and maintain inspection procedures and inspection criteria.
• Work with procurement to ensure the quality of incoming materials and components.

Other requirement:

• Supervise and train Chemist, Lab Technicians and Interns where applicable.
• Oversee day-to-day activities of quality team to ensure smooth operation by working closely with other departments including production, engineering, procurement and warehouse.
• Provide formal reports on plant performance and issues.
• Lead efforts to ensure good 5S in the laboratory to ensure a safe and efficient workspace.
• Ad-hoc duties/assignments by supervisor.
• SAP knowledge is a must. Product BOM/Master Recipe/COA profile setup etc. is an advantage

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

Job Description

·      We are seeking an experienced QA Lead / Functional Test 

·      Lead with a strong background in functional analysis, test management, and team leadership, particularly within healthcare or public sector transformation programs. 

·      The ideal candidate will drive end-to-end quality assurance processes, ensure regulatory compliance, and lead cross-functional teams to deliver high-quality solutions. 

Key Responsibilities::

·       Functional Analysis & Validation Lead requirement analysis, functional design validation, and ensure traceability across deliverables.

·       Review and validate BRDs, FRDs, user stories, and acceptance criteria.

·       Conduct impact analysis for change requests and system enhancements. 

·      Collaborate with business stakeholders, SMEs, and technical teams to ensure clarity of scope and requirements. 

·      Testing & Quality Assurance Develop and manage test plans, test cases, and traceability matrices. 

·      Oversee the end-to-end test lifecycle, including planning, execution, defect management, and reporting. 

·      Lead defect triage meetings and ensure timely resolution of issues.

·       Define and drive test automation strategy where applicable. 

·      Track and report testing metrics, risks, and quality KPIs to leadership. 

·      Coordination & Delivery Coordinate with development, integration, and release teams to ensure seamless delivery.

·       Ensure compliance with healthcare/public sector regulatory standards and quality benchmarks. 

·      Manage dependencies and risks across multiple workstreams. 

·      Leadership & Stakeholder Management Lead, mentor, and manage a team of functional analysts and test engineers. 

·      Allocate tasks, monitor progress, and ensure adherence to timelines. 

·      Provide regular status reports to project and client leadership. 

·      Manage client communications, expectations, and escalations effectively. 

·      Drive continuous improvement initiatives within QA and testing processes. 

Required Skills:: 

·      Bachelor’s degree in Engineering, Computer Science, Healthcare IT, or a related field. 3–5 years of experience in functional analysis and/or testing roles.

·       3+ years of experience in a leadership role, managing QA or functional teams. 

·      Strong proficiency in SQL for data validation and analysis. 

·      Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint).

·       Experience working with SAP systems. 

·      Hands-on experience with test management tools such as JIRA, ALM, or Azure DevOps. 

·      Strong understanding of Agile and Hybrid delivery models.

 Preferred Experience:: 

·      Experience in Healthcare or Public Sector transformation programs. 

·      Strong knowledge of regulatory compliance standards in healthcare/public sector environments.

·       Experience in implementing test automation frameworks. 

·      Exposure to large-scale enterprise system implementations.

Responsibilities and Tasks:

• Establish strategy, models and systems to improve wafer at risk reduction for RAM Defense line hardening.

• Establish strategy, model and systems to improve RAM quality control and reduce defect OOC% variation.

• Establish strategy, model and systems to improve RAM operation efficiency to achieve labor productivity improvement, Cycle time performance, tool utilization performance for lower cost.

• Establish and improve BKM (Best Known Method) related to RAM defense line hardening and operation efficiency.

• Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.

• Implement abnormal analysis and improvement.

• Lead Copy Smart Team (CST), facilitate taskforce discussion and drive RAM network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments.

• Support and performs audit and establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy.

• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.

• Manage projects with proper Project Management process with metric to track project success.

• Track Fab performance metrics for benchmarking purposes. Identify gaps and area of improvements for Fabs.

• Provide tactical support and coordination for the Fabs as required for issues of People, Safety, Time to Mature cummulative Yield, Quality, Cost, and Cycle Time.

• Communicate clearly and present strategy and updates to network members and leaders.

Requirements:

• Master's/Bachelor's in Engineering

• Relevant working experiences in RDA and/or Metrology

• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

• Good communication skills, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management

• Promote worldwide sharing and transfer of area-specific domain knowledge

• Proficiency, experience and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organization Change Management have advantage.

·Implements Organisation's Quality Management System (QMS) and Safety Management System to ensure compliance to regulatory requirements.

· Review& revise Regulatory Exposition Documents, Company Quality Policy, and Quality Procedures including the scope of work & capability list periodically as necessary.

·Function as Complaint Coordinator to ensure complaint/feedback been addressed and documented for closure.

· Conduct System, product and process audits to ensure regulatory/customer requirements compliance. Drive Corrective Action Request (CAR) prompt closure with effective Corrective and Preventive actions.

·Responsible to in-coming, in-process and out-going processes ensuring product meets specification.

· Track and monitor quality KPIs and perform trend analysis to identify systemic improvement opportunities.

· Support 3rd party audit activities including pre-audit planning, audit readiness, and post-audit follow up with external auditor.

. Program and optimize CMM inspections using PC-DMIS, Calypso,or MCOSMOS

·        Lead and perform detailed dimensional and visual inspections of machined parts using tools such as Smart Scope, micrometers, calipers, CMMs, height gauges, and surface roughness testers.

·        Lead &Prepare inspection reports, first article inspections (FAI) reports for review and approvals

·        Interpret complex GD&T

·        Perform MSA,GR&R, and Cp/Cpk analysis

·        Partner with Engineering & Production to resolve dimensional issues

·        Mentor junior quality team members

·        Foster culture of accountability, accuracy, and continuous improvement within the quality team.

·        Proficient in using precision measuring instruments and advanced inspection tools (CMM,vision systems).

·        Strong understanding of GD&T and ability to read complex engineering drawings.

·        Experience with quality tools and methodologies such as FMEA, 8D, Root Cause Analysis,and Statistical Process Control (SPC).

·        Experience in high-mix, tight-deadline manufacturing environments

·        Familiarity with ERP systems

Requirements:

· Diploma or Bachelor Degree in Engineering or related field.

· Ability to read engineering drawings and use a variety of precision testing and measuring