Total 22,569 Engineering job vacancies

• 至少兩年相關領域工作經驗。
• 行銷或任何相關領域的文憑。
• 優秀的溝通能力、較強的監督和領導能力。
• 具備預見和解決問題的能力。
• 優秀的組織能力和注重細節。
• 熟練使用資料輸入及庫存管理軟體及系統。
• 監督和協調日常倉庫活動（收貨、出貨和存放貨物）。
• 管理庫存水平，確保有效率地交付貨物。
• 負責庫存的記錄和維護，並就收到的進口貨物和出口貨物提供建議。
• 及時訂購新的物資。
• 負責倉庫安全以及員工管理。
• 培訓、指導和評估新入職的倉庫員工。
• 管理層不時安排的其他職責和任務。

福利待遇

• 小組診所
• 提供宿舍
• 制服
• 安全鞋
• 個人發展機會
• 有薪培訓和發展
• 年假
• 病假

職責：

• 進行電氣線路施工，包括電纜敷設、電纜線槽安裝、導管安裝和終端連接。
• 安裝安全和配電組件（例如開關、電阻器、斷路器面板等）。
• 連接電路和網路中的線路，確保組件的相容性。
• 準備並組裝導管，並將電線穿過導管連接。
• 協助工程師對電氣線路系統和控制面板進行檢查、測試、故障排除和維修。
• 能夠閱讀、理解並遵循電路圖、接線圖和控制圖。
• 支援現場安裝、測試、調試和維護活動。
• 確保所有電氣工程均依照工程規範、安全法規和製程標準進行。
• 根據安排，參與工廠、軋鋼廠、車間或客戶現場的專案工作。
• 根據公司要求，不時承擔臨時性工作和技術性任務。
• 確保工具和設備狀況良好。

要求：

• 至少 2 年電氣佈線、配電盤佈線、現場安裝或相關工業電氣工作經驗者優先考慮。
• 能夠閱讀和理解電氣圖、控制圖和接線圖。
• 責任心強，自律性高，既能獨立工作，也能作為團隊成員協作。
• 良好的態度、團隊合作精神和溝通能力
• 熟悉工業電氣系統和自動化相關工作者優先考慮。
• 致力於安全、品質和規範的文檔記錄。

福利待遇：

• 公司製服
• 安全鞋/個人防護裝備
• 個人發展機會
• 有薪培訓和發展
• 公積金/社保/就業保險（視僱用條款而定）
• 如適用，可申請加班費。
• 年假
• 病假

The Facility Engineer is responsible for maintaining and optimizing all the physical infrastructure systems within the data center, including power, cooling, HVAC, backup systems, and building management. The engineer ensures that the data center operates at peak performance, meets reliability standards, and complies with safety and regulatory requirements.

Roles and Responsibilities:

1. Facility Operations & Maintenance

• Monitor and maintain critical infrastructure systems, including HVAC (heating, ventilation, air conditioning), UPS (uninterruptible power supply), backup generators, fire suppression systems, security systems, and electrical systems.
• Conduct regular checks and preventive maintenance on equipment to ensure all systems are functioning properly and to minimize the risk of failure.
• Respond to and resolve operational issues related to building systems (e.g., power outages, cooling system failures, or water leaks).
• Coordinate with vendors for repairs, inspections, and parts replacements as needed.

2. System Performance Monitoring

• Continuously monitor performance data for electrical, mechanical, and HVAC systems to ensure they are operating efficiently and within safe parameters.
• Use building management systems (BMS) or monitoring software to track environmental conditions (temperature, humidity, airflow) and equipment status.
• Provide real-time alerts and notifications for any critical failures, anomalies, or deviations from acceptable operating conditions.

3. Preventive and Corrective Maintenance

• Develop and execute preventive maintenance (PM) schedules for all critical systems, including electrical, mechanical, and HVAC systems, to minimize unplanned downtime.
• Perform corrective maintenance on equipment failures, including troubleshooting, diagnostics, and repairs of equipment.
• Ensure compliance with industry standards and local regulations for safety, efficiency, and reliability.

4. Emergency Response and Incident Management

• Serve as the primary point of contact for facility-related emergencies, including power outages, HVAC failures, and fire alarms.
• Follow emergency response protocols, including coordination with external vendors, emergency services, and internal teams to resolve critical issues and restore service as quickly as possible.
• Document incidents, root causes, and corrective actions taken to prevent future occurrences.

5. Asset Management and Tracking

• Manage inventory of spare parts, tools, and materials required for the maintenance and repair of facility systems.
• Track the lifecycle of critical assets, including purchase, installation, maintenance, and decommissioning of equipment.
• Ensure asset information is recorded and updated in the asset management system for accurate tracking and reporting.

6. Compliance and Safety

• Ensure all systems comply with relevant health, safety, and environmental regulations (e.g., OSHA, EPA) and maintain certifications such as ISO 9001, ISO 27001, or other industry standards.
• Maintain the data center facility in a safe condition, implementing safety protocols and procedures for staff and visitors.
• Conduct safety drills, audits, and inspections to ensure compliance with internal safety policies and external regulatory requirements.
• Ensure that all emergency systems (e.g., fire suppression, emergency lighting, exit routes) are fully operational.

7. Energy Efficiency and Sustainability

• Monitor energy usage and explore opportunities to improve energy efficiency and reduce operational costs while maintaining reliability.
• Recommend and implement upgrades or improvements to systems that enhance energy efficiency and reduce the carbon footprint (e.g., optimizing HVAC operations, improving lighting efficiency).
• Assist in achieving sustainability goals and compliance with green building standards such as LEED or BREEAM.

8. Vendor Management and Coordination

• Work closely with third-party vendors and contractors to schedule maintenance, obtain quotes, and oversee service delivery for various facility services.
• Ensure vendors meet service level agreements (SLAs) and adhere to safety, quality, and compliance standards.
• Coordinate with external parties for major repairs or upgrades to building systems (e.g., electrical, HVAC, fire suppression).

9. Documentation and Reporting

• Maintain detailed records of all maintenance activities, inspections, repairs, and incidents.
• Generate and analyze reports on system performance, energy usage, maintenance activities, and operational metrics for management review.
• Prepare and submit reports on the status of the facility, including energy efficiency, uptime, and planned maintenance activities.

10. Capacity Planning and Infrastructure Design

• Collaborate with IT and operations teams to plan for future capacity requirements and infrastructure upgrades.
• Assist in the design and implementation of system expansions or new installations to accommodate growth in data center operations (e.g., additional power requirements, cooling systems, etc.).
• Plan for redundancy and scalability in critical systems to ensure high availability and reliability.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Central location
• Regular team activities
• Company trips
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities
• Dental insurance
• Vision insurance
• Disability benefits
• Paid training and development

• Min 2 years working experience in related field.
• Diploma in Marketing / any related field.
• Excellent communication, strong supervisory and leadership skills.
• Ability to anticipate & solve problems.
• Excellent organizational skills & attention to details.
• Proficient with data entry & inventory software & systems.
• Oversee and coordinate daily warehouse activities (receiving, issuing & storing goods).
• Managing inventory levels, ensuring the efficient delivery of goods.
• Handle the recording and maintaining of inventory, advising the imports received and items exported.
• Order new supplies in a timely manner.
• Responsible for securing the warehouse as well as supervising staff.
• Train, guide and evaluate new warehouse workers.
• Other duties & task given by Management from time to time.

Perks & Benefits

• Panel Clinic
• Provide Hostel
• Uniform
• Safety Shoes
• Personal development opportunities
• Paid training and development
• Annual Leave
• Medical Leave

Tanggungjawab:

• Kecemerlangan dalam menerima, mengenal pasti, menghantar dan menjamin kualiti barangan.
• Mengukur dan melaporkan keberkesanan aktiviti pergudangan dan prestasi pekerja.
• Merancang dan menyelenggara inventori dan kawasan penyimpanan.
• Memastikan ketepatan penghantaran dan transaksi inventori.
• Sampaikan jangkaan kerja dan latih pekerja.
• Tentukan tahap kakitangan dan tetapkan beban kerja.
• Mengekalkan rekod barang, mendokumentasikan maklumat yang diperlukan dan menggunakan laporan untuk status gudang projek.
• Kenal pasti bidang penambahbaikan dan wujudkan inovasi atau sesuaikan prosedur dan amalan kerja sedia ada.
• Merancang dan menyelaras aktiviti dengan jabatan lain.

Keperluan:

• Pengalaman kerja yang terbukti sebagai penyelia kedai / penjaga kedai / pembantu kedai.
• Kemahiran dan teknik penyeliaan yang sangat berkesan.
• Kebolehan memasukkan data ke dalam pangkalan data atau sistem berkomputer lain untuk mengekalkan rekod stok terkini.
• Mampu memasukkan, mengambil dan menganalisis data.
• Komitmen langsung untuk menyelesaikan tugasan.
• Komunikasi dan kemahiran interpersonal yang baik.
• Kebolehan terbukti untuk menyelaras operasi.
• Kemahiran organisasi dan pengurusan masa yang baik.
• Mempunyai Ijazah Sarjana Muda dalam Pengurusan Rantaian Bekalan, Logistik atau Pentadbiran Perniagaan adalah satu kelebihan.
• Kebolehan bekerja di bawah tekanan dan memenuhi tarikh akhir.
• Boleh memandu dan menyelenggara forklift adalah satu kelebihan.

Faedah & Kebaikan

• Seragam Syarikat
• Peluang pembangunan peribadi
• Latihan dan pembangunan berbayar
• Cuti Tahunan
• Cuti Perubatan

Responsibilities:

• To manage and oversee all activities related to Quality Assurance and Quality Control.
• In-charge of Document Control Center (DCC)- ensuring changes in manual, procedures and forms all well updated and distributed & proper upkeep the ISO documents according to retention periods.
• Respond to customer complaint and lead team in problem solving and quality improvement plan between project management, Production & Warehouse and customer.
• Review and support of sample Inspection and perform QA job periodically to ensure good quality control.
• Perform analysis on products and identify root cause, suggest solutions, investigate product quality in order to make improvements to achieve better customer satisfaction.
• Manage and oversee the calibration of measuring and testing equipment, ensuring accuracy and compliance with standards.
• Identify key KPIs for product quality.
• Prepare and present reports and metrics to Management.
• Attend to ad-hoc task and be a team player.

Requirements:

• Bachelor’s Degree/Diploma in Engineering (Mechanical, Manufacturing or equivalent)
• Minimum 1 year of experience in QA/QC role
• Able to work and communicate effectively with all levels and proactive.
• Good attendance, willingness to learn, meticulous, diligent, honest and self-discipline.
•  Familiar with ISO9001 Standards

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Personal leave
• Open culture
• Personal development opportunities

• Minimum 2 tahun pengalaman kerja dalam bidang berkaitan.
• Diploma Pemasaran / mana-mana bidang berkaitan.
• Komunikasi yang cemerlang, kemahiran penyeliaan dan kepimpinan yang mantap.
• Kebolehan untuk menjangka & menyelesaikan masalah.
• Kemahiran organisasi yang cemerlang & perhatian terhadap perincian.
• Mahir dengan perisian & sistem kemasukan data & inventori.
• Menyelia dan menyelaras aktiviti gudang harian (menerima, mengeluarkan & menyimpan barang).
• Mengurus tahap inventori, memastikan penghantaran barang yang cekap.
• Mengendalikan rakaman dan penyelenggaraan inventori, memaklumkan import yang diterima dan barang yang dieksport.
• Pesan bekalan baharu tepat pada masanya.
• Bertanggungjawab untuk mengawal keselamatan gudang serta menyelia kakitangan.
• Melatih, membimbing dan menilai pekerja gudang baharu.
• Tugas & tanggungjawab lain yang diberikan oleh Pihak Pengurusan dari semasa ke semasa.

Faedah & Kebaikan

• Klinik Panel
• Menyediakan Hostel
• Seragam
• Kasut Keselamatan
• Peluang pembangunan peribadi
• Latihan dan pembangunan berbayar
• Cuti Tahunan
• Cuti Perubatan

Tanggungjawab:

• Menjalankan kerja-kerja pendawaian elektrik, termasuk penarikan kabel, penyambungan kabel, pemasangan saluran dan penamatan.
• Pasang komponen keselamatan dan pengagihan (cth. suis, perintang, panel pemutus litar dll.).
• Sambungkan pendawaian dalam litar dan rangkaian elektrik bagi memastikan keserasian komponen.
• Sediakan dan pasang saluran serta sambungkan pendawaian melaluinya.
• Membantu jurutera dalam pemeriksaan, pengujian, penyelesaian masalah dan pembetulan sistem pendawaian elektrik dan panel kawalan.
• Membaca, memahami dan mengikuti gambar rajah elektrik, skema pendawaian dan lukisan kawalan.
• Menyokong aktiviti pemasangan, pengujian, pentauliahan dan penyelenggaraan tapak.
• Memastikan semua kerja elektrik dijalankan mengikut spesifikasi projek, peraturan keselamatan dan piawaian mutu kerja.
• Menyertai kerja projek di kilang, kilang, loji atau tapak pelanggan seperti yang ditugaskan.
• Menjalankan tugas-tugas ad-hoc dan tugasan teknikal seperti yang dikehendaki oleh syarikat dari semasa ke semasa.
• Pastikan alatan dan kelengkapan berada dalam keadaan baik.

Keperluan:

• Minimum 2 tahun pengalaman kerja dalam pendawaian elektrik, pendawaian panel, pemasangan tapak atau kerja-kerja elektrik industri yang berkaitan akan menjadi kelebihan tambahan.
• Mampu membaca dan memahami lukisan elektrik, gambarajah kawalan dan skema pendawaian.
• Bertanggungjawab, berdisiplin, dan boleh bekerja secara bebas dan sebagai sebahagian daripada pasukan.
• Sikap yang baik, kerja berpasukan dan komunikasi yang baik
• Biasa dengan sistem elektrik perindustrian dan kerja berkaitan automasi akan menjadi kelebihan tambahan.
• Komited terhadap keselamatan, kualiti dan dokumentasi yang betul.

Faedah & Keistimewaan:

• Seragam Syarikat
• Kasut Keselamatan / PPE
• Peluang pembangunan peribadi
• Latihan dan pembangunan berbayar
• KWSP / SOCSO / EIS (tertakluk kepada terma pekerjaan)
• Tuntutan kerja lebih masa jika berkenaan
• Cuti Tahunan
• Cuti Perubatan

設施工程師負責維護和優化資料中心內的所有實體基礎設施系統，包括電力、冷卻、暖通空調、備用系統和樓宇管理。該工程師確保資料中心以最佳效能運行，滿足可靠性標準，並符合安全和監管要求。

角色與職責：

1. 設施運作與維護

• 監控和維護關鍵基礎設施系統，包括 HVAC（暖氣、通風、空調）、UPS（不間斷電源）、備用發電機、消防系統、安全系統和電氣系統。
• 定期檢查和維護設備，以確保所有系統正常運行，並將故障風險降至最低。
• 回應並解決與建築系統相關的運作問題（例如，停電、冷卻系統故障或漏水）。
• 根據需要與供應商協調維修、檢查和零件更換事宜。

2. 系統效能監控

• 持續監控電氣、機械和暖通空調系統的性能數據，以確保它們有效運作並在安全參數範圍內。
• 使用樓宇管理系統 (BMS) 或監控軟體追蹤環境條件（溫度、濕度、氣流）和設備狀態。
• 對任何重大故障、異常或偏離可接受運作條件的情況，提供即時警報和通知。

3. 預防性和矯正性維護

• 制定並執行所有關鍵系統（包括電氣、機械和暖通空調系統）的預防性維護 (PM) 計劃，以最大限度地減少非計劃性停機時間。
• 對設備故障進行糾正性維護，包括故障排除、診斷和維修。
• 確保符合行業標準和當地法規，以確保安全性、效率和可靠性。

4. 緊急應變與事件管理

• 作為設施相關緊急情況（包括停電、暖通空調故障和火災警報）的主要聯絡人。
• 遵循緊急應變協議，包括與外部供應商、緊急服務部門和內部團隊協調，以盡快解決關鍵問題並恢復服務。
• 記錄事件、根本原因以及為防止未來再次發生而採取的糾正措施。

5. 資產管理與追蹤

• 管理設施系統維護和維修所需的備件、工具和材料的庫存。
• 追蹤關鍵資產的生命週期，包括設備的採購、安裝、維護和退役。
• 確保資產資訊在資產管理系統中被記錄和更新，以便進行準確的追蹤和報告。

6. 合規性和安全性

• 確保所有系統符合相關的健康、安全和環境法規（例如 OSHA、EPA），並維持 ISO 9001、ISO 27001 或其他行業標準等認證。
• 保持資料中心設施處於安全狀態，對員工和訪客實施安全規程和程序。
• 進行安全演練、審核和檢查，以確保符合內部安全政策和外部監管要求。
• 確保所有緊急系統（例如，滅火系統、緊急照明系統、疏散通道）完全正常運作。

7. 能源效率和永續性

• 監控能源使用情況，探索提高能源效率和降低營運成本的機會，同時保持可靠性。
• 建議並實施能夠提高能源效率和減少碳足跡的系統升級或改進措施（例如，優化暖通空調運行，提高照明效率）。
• 協助實現永續發展目標並符合綠建築標準，例如 LEED 或 BREEAM。

8. 供應商管理與協調

• 與第三方供應商和承包商密切合作，安排維護、取得報價並監督各種設施服務的交付。
• 確保供應商符合服務等級協定 (SLA) 並遵守安全、品質和合規標準。
• 與外部各方協調，對建築物系統（例如電氣、暖通空調、消防系統）進行重大維修或升級。

9. 文件記錄和報告

• 詳細記錄所有維護活動、檢查、維修和事故。
• 產生並分析系統性能、能源使用、維護活動和運作指標的報告，供管理階層審查。
• 準備並提交有關設施狀況的報告，包括能源效率、正常運作時間和計畫維護活動。

10. 容量規劃與基礎建設設計

• 與 IT 和營運團隊協作，規劃未來的容量需求和基礎設施升級。
• 協助設計和實施系統擴展或新安裝，以適應資料中心營運的成長（例如，額外的電力需求、冷卻系統等）。
• 關鍵系統應具備冗餘性和可擴展性，以確保高可用性和可靠性。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 中心位置
• 定期團隊活動
• 公司旅行
• 醫療保險
• 個人休假
• 開放文化
• 個人發展機會
• 牙科保險
• 視力保險
• 殘障津貼
• 有薪培訓和發展

職責：

• 在收貨、識別、出貨和品質保證方面表現卓越。
• 衡量並報告倉儲活動的有效性和員工績效。
• 規劃及維護庫存及儲存區域。
• 確保發貨和庫存交易的準確性。
• 溝通工作期望並指導員工。
• 確定人員配置水準並分配工作量。
• 維護物料記錄，記錄必要信息，並利用報告預測倉庫狀態。
• 找出需要改進的領域，並制定創新性或調整現有的工作流程和做法。
• 與其他部門協商並協調各項活動。

要求：

• 擁有擔任商店主管/店員/店員的實際工作經驗。
• 高效率的督導技巧與技巧。
• 能夠將資料輸入資料庫或其他電腦系統，以維護最新的庫存記錄。
• 能夠輸入、檢索和分析資料。
• 親力親為，認真負責地完成工作。
• 良好的溝通和人際交往能力。
• 具備與營運部門協調合作的能力。
• 良好的組織能力和時間管理能力。
• 擁有供應鏈管理、物流或工商管理學士學位者優先考慮。
• 能夠在壓力下工作並按時完成任務。
• 會駕駛和維護堆高機者優先考慮。

福利待遇

• 公司製服
• 個人發展機會
• 有薪培訓和發展
• 年假
• 病假

Job Summary

Assist the Manager in all matters related to sales such as prospecting new customer, provide after sales service, attend inquiries and complaint and others relevant activities assigned to you from time to time.

Job Description

• Ensure documentations for sales are prepared on time.
• Ensure logistic requirement are arranged accordingly for timely delivery.
• Ensure customer’s inquiry and requisition are attended promptly.
• Ensure relevant reports are submitted on time
• Update existing and new customer registration
• Handle cold calling of potential customers
• Follow up on collection
• Promote and market Company’s products.
• Prospect new customer.
• Attend Walk In customer.
• Process and prepare documentations (Sale quotation, Delivery Order, Invoices, and other documents associated with Sales).
• Support on project costing
• Attend monthly Sales Meeting, Sales Order Meeting & Debtor Meeting.
• Coordinate with logistic arrangement when necessary.
• Assist in trade fair/exhibition as and when required.
• Analyses the daily, weekly and monthly sales performance
• Others jobs associated with sales matters delegated to you from time to time
• Any other duties assigned by the management as and when required

Qualification

• Degree or at least three (3) years’ experience in a similar capacity
• 3 years working experience in sales department.
• Preferable computer literate. Ability to handle multiple priorities
• People management skill
• Good interpersonal skills
• No physical disability
• Possess own transport and willing to travel.

Ability to commute/relocate:

• Subang Jaya: Reliably commute or planning to relocate before starting work (Required)

Education:

• Bachelor's (Preferred)

Experience:

• Sales Engineer: 1 year (Preferred)

Language:

• Malay, English, Chinese (Preferred)

Perks & Benefits:

• Yearly bonuses and increment
• Allowance (travel, car, fuel, mobile phone, hotel stay and etc.)
• Canteen coupon
• Hospitalization & Surgical Insurance, Personal Accident Insurance, Life-term Insurance
• Annual leave, Sick leave, Compassionate leave, Exam leave, Paternity leave and etc.
• Personal development opportunities,
• Various kind of internal and external training provided.

1. Perform machine set up, adjustment and tooling arrangement for CNC Grinding machines.
2. Read and interpret machining drawing, GD&T, tolerance requirements.
3. Select correct grinding wheel, speed, feed, fixture and clamping method.
4. Perform offset adjustment, dressing and balancing of grinding wheel.
5. Operate machine to produce parts according to quality / dimension target.
6. Conduct in-process measurement using micrometer, Vernier caliper, height gauge, profile projector, CMM (if required).
7. Ensure part quality meets drawing specification and customer requirement.
8. Maintain good housekeeping 5S around machine area.
9. Report any abnormality, machine breakdown or quality deviation to superior immediately.
10. Follow safety rules, PPE and company SOP at all times.
11. To carry out ISO9001, ISO 14001and IATF16949 activities.
12. Any others matters required by the management.

Perks & Benefits

• Increment and bonus
• Allowance (meal, training, etc.)
• Medical insurance
• Panel clinics
• Personal development opportunities
• Paid training and development/ Education Training Program
• Company Annual Dinner & Lucky draw
• Festival angpow

• Monitor the daily QA activities.

• To monitor and ensure the product quality is comply to specification and product quality standards.

• Responsible for quality assurance activities and documentation to meet ISO 9001, IATF 16949 & Customer Specific Requirements (if any).

• Prepare Quality Monthly Report (Rejection/COPQ)

• Arrange all necessary training for QA/QC Operator and maintain their skill matrix.

• Prepare document related to QC Inspection and update accordingly.

• Conduct Briefing and Internal Quality meeting.

• Handle customer complaints and Internal quality issue.

• Prepare corrective action report external/internal.

• Compile monthly customer complaint and corrective action summary.

• Internal Quality Auditor as assigned by Dept Head

• Prepare PPAP Documentation (PFMEA / Control Plan / MSA / SPC)

• Work with cross functional team during APQP Meeting Discussion

• Calibration Management (External / Internal)

AUTHORITY

• To stop Production Processes in the event a risk of nonconformance has been identified and/or part does not conform to specification and part quality as specified by customer.

• To stop delivery and/or recall any part suspected does not conform to the specification and part quality as specified by customer.

Perks & Benefits

• Increment and bonus
• Allowance (meal, training etc.)
• Nearby public transport
• Medical insurance
• Dental claim
• Training and development

1. Assist in the design, fabrication, and modification of tooling, jigs, fixtures, and dies
2. Support tooling setup and troubleshooting during production
3. Perform routine inspection, maintenance, and repair of tools and equipment
4. Work with production and quality teams to resolve tooling-related issues
5. Monitor tooling performance and recommend improvements for efficiency and cost reduction
6. Maintain proper documentation for tooling designs, modifications, and maintenance records
7. Assist in new product development by preparing and testing tooling requirements
8. Ensure compliance with safety, quality, and operational standards
9. Coordinate with suppliers or vendors for tooling fabrication or repair (if required)

Perks & Benefits

• Increment and bonus
• Allowance (meal, shift, training, etc)
• Annual Dinner & Festival Angpow
• Personal Accident insurance & Hospitalization
• Medical benefits
• Condolence and paternity benefit

職位描述

職位：現場工程師

地點：砂勞越州美里

報告對象：營運主管

職位描述

• 在進行新系統安裝或現有系統搬遷之前，需進行現場勘察。
• 在客戶現場安裝和配置固定天線和自動追蹤VSAT系統。
• 排除VSAT鏈路故障，並依照客戶合約進行定期預防性維護。
• 在鑽井平台移動期間監控船上鏈路性能，並在必要時重新定位VSAT系統。
• 安裝前對設備進行準備和測試。
• 每項工作完成後，編制時間順序報告、服務報告和設備清單。
• 熟悉路由器、多工器、數據機、RFT 和其他相關電信設備。

要求

• 必須擁有電腦科學或網路工程專業的學士學位或文憑。

（電腦/電信）最好是衛星通訊方向。

• 必須具備網路技術技能－TCP/IP、思科VOIP、思科QoS以及無線和資料終端連線。
• 身體健康，符合取得海上作業安全護照的條件。
• 優先考慮應屆畢業生或至少有一年工作經驗者。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 中心位置
• 休閒著裝要求
• 定期團隊活動
• 個人休假
• 開放文化
• 個人發展機會
• 牙科保險
• 視力保險