Total 4,068 Others level Maintenance / Repair job vacancies

We are seeking a highly skilled and innovative senior engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.
   

1.Role                                                                                                                                                                       1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve
production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3.
1.2 Responsible for 1st level failure analysis of reject tools or components from production
line to identify process or supplier related issue for failures which are unable to be solve
by shopfloor leaders.
1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician.

2.Job Scope
2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.
2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose.
2.5 To perform daily complaint of raw material to PUQ and assist in scrap preparation if necessary.
2.6 To train and monitor repairers on daily rework activities.
2.7 To support Production in achieving the effectiveness/productivity, output, FOR and quality target.
2.8 To support and involve in BPS activities such as Point CIP projects, LLD, Change Over, TPM or process/product improvement.
2.9 To participate in all scraping audits, coordinate in providing and implementing corrective actions.
2.10 To prepare & submit the scrap form which need submitted daily scrap for management
approval.
2.12 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and
process meet the capability requirement during new product introduction and mass
production.
2.13 Support VSE/FPV in coordination of PDP project sample build (Pre-Pilot and Pilot run) on
material availability and jig and fixtures readiness.
2.14To assist the Process Engineer / Supervisor in the day-to-day operation.
2.15To support an acting as supervisor if Supervisor & LO no turn up.
2.16To carry out any other duties assigned by immediate superior time to time.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Operations Monitoring: Oversee semiconductor solid state drive (SSD) mechanical assembly manufacturing processes, ensuring production runs smoothly and efficiently while maintaining optimal output levels and component precision standards.
• Troubleshooting & Maintenance: Identify machine malfunctions in SSD assembly equipment, troubleshoot complex mechanical and electromechanical issues, and perform routine maintenance to minimize production disruptions and ensure assembly accuracy.
• Process Optimization: Collaborate with engineers to improve SSD mechanical assembly workflow, reduce downtime, enhance product quality, and optimize assembly sequences through continuous improvement initiatives.
• Documentation & Reporting: Compile data, create evaluation reports, and document troubleshooting findings specific to SSD assembly processes to maintain accurate equipment and process records.
• Compliance & Safety: Maintain 5S standards in SSD assembly areas, follow safety protocols for semiconductor manufacturing environments, and ensure quality standards are met across all mechanical assembly operations.
• Quality Assurance & Inspection: Conduct inspections and quality checks on SSD mechanical assemblies to ensure adherence to established specifications, dimensional tolerances, and industry standards.
• Team Collaboration: Work cross-functionally with production teams, engineers, and supervisors to resolve SSD assembly-related issues and implement process improvements.
• Training & Mentoring: Provide guidance and technical support to junior technicians on SSD mechanical assembly procedures and assist in their professional development.

Key Duties and Responsibilities

1. To execute corrective measures with high efficiency whenever there is a breakdown and record down the clear definition of corrective actions in B-core CMMS.
2. To support machine product EWAK changeover or conversion activities to ensure changeover time range fulfill operation target setting.
3. To support module engineer for workstation and equipment setup and troubleshooting
4. To assist maintenance engineer achieve department goals and KPIs.
5. To attend all breakdowns promptly
6. To assist module engineer for fixture/tool modification and replacement.    
7. Support PM task base on real time condition required, planned schedule or manpower availability.
8. Maintain 5S in work area and comply with Bosch health and safety compliance
9. To support on any other section related duties assigned to current team.
10. Comply with safety ground rules and requirement to carry out the maintenance.

• Perform routine laboratory tests on milling, batching, packing samples, and raw materials according to SOP, ensuring timely and accurate results.
• Report any quality defects or arising issues to the superior for further action.
• Issue Non-Conformance Reports (NCR) for product quality defects and update NCR records accordingly.
• Conduct additional testing related to competitor’s flour analysis, flour streaming studies, complaints, and R&D evaluations as assigned.
• Accurately record and file test results, graphs, and other documents with no errors.
• Ensure strict compliance with safety procedures and regulatory requirements such as HACCP, FSSC 22000, HALAL, and Good Laboratory Practice.
• Serve as a backup to change formulas in IFIX after normal shifts, during weekends, and on public holidays as instructed.
• Support and comply with FSSC 22000 requirements and actively participate in related activities.
• Perform any other tasks and assignments as directed by management.

Responsibilities

· Assist pharmacists in dispensing medications to patients.

· Accurately prepare and label prescriptions according to prescriptions or medication orders.

· Manage medication inventory, including stocking, organizing, and tracking medication supplies.

· Perform drug preparation duties, including measuring, counting, and mixing medications.

· Provide patient counseling under the supervision of the pharmacist on proper medication usage and side effects.

· Assist with maintaining pharmacy records and patient information.

· Ensure compliance with legal, regulatory, and safety requirements.

· Communicate with healthcare providers regarding prescription issues and medication clarifications.

· Handle customer service inquiries and ensure a positive patient experience.

· Manage prescription refills and process insurance claims.

Requirements

Diploma in Pharmaceutical Science or a related field.

For interested candidates, please send your most recent and updated resume tosallytsin@recruitexpress.com.sg

WA me at http://wa.me/+6598326219 or tele me at @sallytsin

Tsin Chien Yee Sally
R25127272
Recruit Express Pte Ltd
EA License No. 99C4599

PURPOSE OF THE FUNCTION

The Executive, Facilities Management is responsible for ensuring the safe, reliable, compliant, and efficient operation of all building operation systems within the shopping mall, including fire alarm, CCTV, card access, PA, plumbing, electrical, toilet equipment, electrical distribution. The role supports business continuity, tenant satisfaction, asset performance, and full compliance with statutory and operational standards.

JOB DESCRIPTION

Responsible

1. Execute and oversee daily operations and maintenance of M&E systems to ensure optimal performance, safety, and minimal downtime.
2. Supervise contractors and vendors for M&E works, ensuring compliance with scope, specifications, safety requirements, and quality standards.
3. Monitor and upgrade preventive, corrective, and predictive maintenance programs for all M&E systems.
4. Ensure compliance with statutory and regulatory requirements (DOSH, Bomba, Suruhanjaya Tenaga, OSHA, IKANO) through inspections and audits.
5. Prepare, review, and maintain maintenance records, technical reports, and documentation for audit and management purposes.
6. Monitor and manage work orders via CMMS (e.g., Yardi) to ensure timely execution and closure.
7. Coordinate and respond to tenants and internal teams to resolve M&E-related issues and ensure service continuity, and attend management, departmental, and cross-functional meetings.
8. Attend fit-out pre-opening inspection, event inspection and conduct routine inspections of electrical and mechanical systems to identify defects, risks, and improvement opportunities.
9. Support project works, upgrading, and system improvement initiatives related to M&E services.
10. Support energy management and sustainability initiatives, including monitoring of electrical consumption and system efficiency.
11. To transfer technical knowledge, operational procedures, and best practices from Executive-level staff to Technicians, ensuring consistent performance, safety compliance, and skill development.

Accountable

1. Ensure the overall performance, reliability, and availability of M&E systems including electrical distribution, HVAC, MV systems, plumbing, fire protection, lifts, and escalators.
2. Compliance with statutory and safety requirements including Local Authorities, DOSH, Bomba, Suruhanjaya Tenaga, OSHA, and MyTOWN SOPs.
3. Planning, execution, and effectiveness of preventive maintenance programs for M&E systems.
4. Management of M&E breakdowns, fault response, and minimization of operational and tenant impact.
5. Asset lifecycle management, energy efficiency performance, and maintenance cost control.

Contribute

1. Provide technical input for M&E system upgrades, retrofitting, and asset replacement planning.
2. Support Assistant Manager in maintenance planning, budgeting, and cost optimization.
3. Contribute to root cause analysis (RCA) and continuous improvement of M&E system reliability.
4. Support coordination during mall events, peak periods, and emergency situations.
5. Assist in improving SOPs, maintenance procedures, and safety practices for M&E operations.

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support ME and QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.

1. Ensure Maintenance Key Performance Indicators (KPIs) — including MTBF, MTTR and MWT — for production lines consistently meet or exceed set targets.
2. Execute all relevant activities to achieve departmental KPIs (S,Q,D,C), while driving continuous improvement through realistic goal setting in collaboration with the team.
3. Lead or support root cause analysis using structured methodologies such as Fishbone Diagram, Why- Why, Is/Is not analysis.
4. Ensure all maintenance-related content and documentation reflect the most current data and insights to support informed decision-making and continuous process optimization (PDCA, SPL, OCAP, PSS.PFMEA,CP)
5. Actively participate in Value Stream Daily Leadership Review (DLR) and MyKATA sessions to align with operational priorities and drive engagement.
6. Contribute meaningfully to Value Stream Continuous Improvement Projects (CIP) on a quarterly basis, supporting long-term performance enhancements.
7. Perform troubleshooting and repair of for equipment related issues involving mechanical, electrical and PLC automation systems
8. Collaborate closely with process owners and other stakeholders to resolve quality issues, technical issues and implement improvement initiatives effectively.
9. Train, coach, and develop technician technical know-how to independently and effectively handle assembly station troubleshooting and sustainment activities.
10. New project early involvement to evaluate equipment performance and TPM readiness with technical analysis for rational decision justification. Manage and ensure timely preparation and uploading of all maintenance-related manufacturing documents prior to operational release.
11. Participate actively in TEF departmental initiatives such as Lean After Lean, Digitalization and Automation Projects, and BPS-TPM activities.
12. Carry out any other duties as assigned by the immediate superior, ensuring flexibility and commitment to team and organizational goals.

Sebagai sebuah syarikat elektronik yang berkembang pesat, kami sedang mencari calon yang boleh menunjukkan kepakaran mereka dalam membentuk asas kukuh untuk pasukan perkhidmatan kami, terutamanya dalam bidang pemasangan dan perkhidmatan penghawa dingin (Air Con). Juga berperanan sebagai menjadi sumber teknikal utama untuk pasukan perkhidmatan pelanggan kami, membantu mereka bagi memastikan penyelesaian yang lancar dan cepat.

Tanggungjawab Juruteknik Penghawa Dingin termasuk tetapi tidak terhad kepada

• Memasang, memeriksa, menyelenggara, dan membaiki pelbagai jenis dan jenama penghawa dingin komersial dan kediaman.
• Melaksanakan penyelenggaraan preventif berkala dan kerja-kerja pembetulan pada sistem penghawa dingin.
• Mencari punca masalah elektrik dan mekanikal jika ada kerosakan.
• Melaksanakan kerja-kerja membaiki seperti penggantian kompresor penghawa dingin, motor, kipas, dan lain-lain.
• Mengesyorkan kerja-kerja membaiki yang sesuai dan penambahbaikan kepada pelanggan.
• Melaksanakan servis penghawa dingin di kediaman dan premis komersial pelanggan yang termasuk pencucian kimia, pemeriksaan gas, dan perkhidmatan penyelenggaraan umum.
• Memastikan semua kerja-kerja mematuhi standard alat dan Akta Kesihatan dan Keselamatan.
• Melaporkan harian dan mingguan kepada pengurus terus.
• Sebarang tugas lain yang diperlukan oleh penyelia segera.

• Pengalaman praktikal dalam pemasangan, penyelenggaraan (termasuk mencuci kimia), mengesan masalah, dan membaiki penghawa dingin.
• Mampu melakukan kerja fizikal.
• Penguasaan asas bertutur dan menulis dalam Bahasa Melayu dan Bahasa Inggeris
• Lesen memandu GDL.
• Pengalaman minimum 1 tahun diperlukan.
• Selesa bekerja 5.5 hari (Isnin hingga Jumaat 9 pagi hingga 6:00 petang / Sabtu 9 pagi hingga 1 petang).
• Diutamakan dengan sijil Lesen BCA (Lesen Penghawa Dingin) - Pemasangan Sokongan Struktur Untuk Unit Penghawa Dingin atau yang setaraf / Sijil Kebolehan Khas Malaysia (Diutamakan).

• Kenaikan tahunan dan bonus prestasi.
• Faedah tahunan perubatan.
• Cuti hari jadi.

• Responsible of machine conversion/setup, repair, PM, calibration and maintenance.
• Maintains inventory of required spare parts, tools and instruments.
• Perform and support production output and quality commitments.

Key Responsibilities:

• Focus on performing inspection, calibration, survey and servicing of the equipment onboard ships.
• Report defects/poor conditions of equipments, resolving onboard malfunctions, rectification of safety systems, repairs and supply where applicable
• Proper preparation and execution of work assigned, prompt liaison with vessel agencies, and ensure performance are met at all times
• Generate service reports, Job Delivery Notes, and other relevant documents
• Assist our sales department with technical issues
• Arrange delivery and supply, loading and offlanding of ship equipment, tools or spares

Our main business service scope includes following:

• Fire Fighting Equipment annual service and inspection
• Lifeboat, rescue boat, davit and release gear inspection and servicing
• ODME/OWS/Fixed Gas Detection or Sampling System/UTI/Portable multi-gas detector/pressure gauge/temperature gauge annual calibration and other automation services
• Sample collection for Drug and Alcohol Test, Fresh water or drink water analysis
• Cargo crane/Provision crane/Accommodation ladder/Pilot ladder load test
• Flexible cargo hoses, piping lines pressure test
• Various ship flag/class survey, certification, inspections

Company Website: www.starshipcare.sg

Requirements:

• A-Level/NITEC in relevant fields and above
• Experience as a marine technician /engineer or similar role in a Marine background is a plus
• Posession of Class 3 license with lorry driving experience is a plus
• Meticulous & methodical approach to service jobs and reports generation
• Self-driven attitude to find solutions to problems
• A team player and able to communicate effectively with colleagues and customers
• Willingness to learn new skills and knowledge if no prior experience

Interested candidates please send your CV (with photo) to our HR Head: Ms Lynda Lin and Chin Hui Ping. Email: lynda.linli@gmail.com (Regret only shortlisted will be notified for interview)

Role& Accountabilities:

• Assure compliance with KC site Environment, Health and Safety Management System(EHSMS) and Quality Management System (QMS) requirements, policies and procedures

• Ensure conformance to product specifications and team delivered quality products, quality d efects are identified and rectified immediately

• Achieve the production target and limit the waste within budget within the shift

• Encourage cohesiveness of the team to support the department’s objectives

• Allocates and guide the team members to perform required tasks safely and efficiently

• Ensure that all SOP and check list are accomplished during the operations

• Lead problem solving and guide the team member to resolve the machine issues within the crew

• Initialed the jobs rotation and crew training

• Ensure alignment to corporate/regional internal control guidelines when putting up process and procedures

Position title : Driver cum Technician (Class 3 driving license) 

Location: Islandwide (Office: Sin Ming Lane) [Brighthill MRT]
Working Days: 5.5 days, Monday - Saturday(half day)
Working hours :  8.30am-5.30pm | 8.30am to 12.30pm 
Salary: Basic $2500 + ($100-$200) allowance + OT (roughly $500) 

Job scope: 

• Use company van to fetch working buddy, and drive to client's place. 
• Use machine to service / clear kitchen/ toilet drainage pipe 

Requirements: 

• Class 3 driving license is a must 
• Van can drive home 
• Training provided 

If you are keen to apply, please send me your resume and job applied for on WhatsApp at 9789 3505 or email me at anabel.thesupreme@gmail.com (˶ᵔ ᵕ ᵔ˶)

❄️Anabel Boon Xue Qi | Recruitment Consultant (R25159272) |