Total 23 Senior Executive technology development job vacancies in Manufacturing / Production category in Singapore

Key Responsibilities

1. Regulatory Compliance

a) Ensure Bag Filter and Scrubber systems are properly operated and maintained in compliance with the Environmental Quality Act 1974, Clean Air Regulations 1978, Regulation 40 requirements, and the DOE Guidance Document on Performance Monitoring.

b) Maintain complete and accurate monitoring records related to Air Pollution Control Systems (APCS) in accordance with Department of Environment (DOE) requirements.

c) Act as the main liaison person with DOE during inspections, compliance audits, and enforcement visits.

d) Ensure Air Pollution Control Systems operate within DOE permissible emission limits at all times.

e) Perform or supervise performance monitoring of Air Pollution Control Systems in accordance with DOE competency requirements and applicable guidance documents.

f) Advise management on compliance status and recommend corrective actions where necessary to ensure continuous regulatory compliance.

g) Promote and support continuous improvement initiatives to enhance the efficiency, reliability, and compliance performance of Air Pollution Control Systems.

2. Daily Operation & Monitoring

a) Monitor the operation and performance of the Bag Filter system, including differential pressure readings, compressed air pulse cleaning system performance, filter bag condition, hopper discharge system operation, blower/fan operation, and ducting condition to ensure efficient system performance.

b) Monitor the performance of the Scrubber system, including circulation pump operation, spray nozzle condition, airflow performance, chemical dosing condition (if applicable), and pH monitoring (if applicable) to ensure effective emission control.

c) Conduct routine inspections of Air Pollution Control Systems (APCS), identify abnormal operating conditions, and implement prompt corrective actions to prevent emission non-compliance and equipment failure.

3. System Maintenance & Performance Monitoring

a) Plan, coordinate, and supervise preventive and corrective maintenance activities for Bag Filter and Scrubber systems, including filter bag inspection and replacement, ducting inspection, blower servicing, hopper discharge system maintenance, scrubber nozzle cleaning, and circulation pump servicing.

b) Carry out performance monitoring activities in accordance with DOE requirements and maintain proper inspection and monitoring records to verify system effectiveness.

c) Identify and recommend improvement measures to enhance operational efficiency, system reliability, and environmental compliance performance.

4. Training & Safety

a) Train and guide operators on proper operation and monitoring of Bag Filter and Scrubber systems.

b) Assist in the development and implementation of Standard Operating Procedures (SOPs), inspection checklists, and emergency response procedures related to Air Pollution Control Systems.

c) Ensure all personnel comply with PPE requirements and company environmental, health, and safety policies.

5. Documentation & Reporting

a) Maintain daily operation logbooks for Bag Filter and Scrubber systems.

b) Record monitoring parameters, maintenance activities, abnormal conditions, and corrective actions taken.

c) Maintain accurate records of filter bag replacements, scrubber servicing activities, and performance monitoring checklists.

d) Prepare and submit weekly, monthly, and quarterly environmental compliance reports to management and ensure documentation is readily available for DOE inspections.

Requirements

Mandatory Certification

Possess or be eligible to obtain:

Certified Environmental Professional in Bag Filter Operation (CePBFO)

and/or

Certified Environmental Professional in Scrubber Operation (CePSO)

Issued by Environment Institute of Malaysia (EiMAS) / Department of Environment (DOE)

Experience Requirement

Candidates must have a minimum of two (2) years of experience in Air Pollution Control System (APCS) operation, including Bag Filter systems, Scrubber systems, and industrial emission monitoring. Experience in the textile manufacturing environment will be an added advantage.

Education Requirement

Candidates must possess a Diploma or Degree in Science or Engineering. Candidates with a Polytechnic Certificate or SKM Level 2 qualification may also be considered, provided they have at least one (1) year of relevant working experience in Air Pollution Control System (APCS) operation. Candidates with SPM qualification may be considered if they have three (3) to five (5) years of relevant experience in APCS operation.

Perks & Benefits

• Commission and bonus
• Casual dress code
• Medical insurance
• Personal leave
• Sabbatical leave
• Personal development opportunities
• Paid training and development

Tanggungjawab Utama

1. Pematuhan Kawal Selia

a) Pastikan sistem Penapis Beg dan Penggosok dikendalikan dan diselenggara dengan betul mengikut Akta Kualiti Alam Sekitar 1974, Peraturan Udara Bersih 1978, keperluan Peraturan 40 dan Dokumen Panduan DOE mengenai Pemantauan Prestasi.

b) Mengekalkan rekod pemantauan yang lengkap dan tepat berkaitan Sistem Kawalan Pencemaran Udara (APCS) mengikut keperluan Jabatan Alam Sekitar (JAS).

c) Bertindak sebagai orang perhubungan utama dengan DOE semasa pemeriksaan, audit pematuhan dan lawatan penguatkuasaan.

d) Pastikan Sistem Kawalan Pencemaran Udara beroperasi dalam had pelepasan yang dibenarkan oleh DOE pada setiap masa.

e) Melaksanakan atau menyelia pemantauan prestasi Sistem Kawalan Pencemaran Udara mengikut keperluan kecekapan DOE dan dokumen panduan yang berkenaan.

f) Menasihati pihak pengurusan tentang status pematuhan dan mengesyorkan tindakan pembetulan jika perlu bagi memastikan pematuhan kawal selia yang berterusan.

g) Menggalakkan dan menyokong inisiatif penambahbaikan berterusan untuk meningkatkan kecekapan, kebolehpercayaan dan prestasi pematuhan Sistem Kawalan Pencemaran Udara.

2. Operasi & Pemantauan Harian

a) Pantau operasi dan prestasi sistem Penapis Beg, termasuk bacaan tekanan pembezaan, prestasi sistem pembersihan denyut udara termampat, keadaan beg penapis, operasi sistem pelepasan corong, operasi peniup/kipas dan keadaan saluran untuk memastikan prestasi sistem yang cekap.

b) Pantau prestasi sistem Scrubber, termasuk operasi pam edaran, keadaan muncung semburan, prestasi aliran udara, keadaan dos kimia (jika berkenaan), dan pemantauan pH (jika berkenaan) untuk memastikan kawalan pelepasan yang berkesan.

c) Menjalankan pemeriksaan rutin Sistem Kawalan Pencemaran Udara (APCS), mengenal pasti keadaan operasi yang tidak normal dan melaksanakan tindakan pembetulan segera untuk mencegah ketidakpatuhan pelepasan dan kegagalan peralatan.

3. Penyelenggaraan & Pemantauan Prestasi Sistem

a) Merancang, menyelaras dan menyelia aktiviti penyelenggaraan pencegahan dan pembetulan untuk sistem Penapis Beg dan Penggahar, termasuk pemeriksaan dan penggantian beg penapis, pemeriksaan saluran, servis peniup, penyelenggaraan sistem pelepasan corong, pembersihan muncung penggahar dan servis pam edaran.

b) Menjalankan aktiviti pemantauan prestasi mengikut keperluan DOE dan menyelenggara rekod pemeriksaan dan pemantauan yang betul untuk mengesahkan keberkesanan sistem.

c) Mengenal pasti dan mengesyorkan langkah-langkah penambahbaikan untuk meningkatkan kecekapan operasi, kebolehpercayaan sistem dan prestasi pematuhan alam sekitar.

4. Latihan & Keselamatan

a) Melatih dan membimbing pengendali tentang pengendalian dan pemantauan sistem Penapis Beg dan Penggosok yang betul.

b) Membantu dalam pembangunan dan pelaksanaan Prosedur Operasi Standard (SOP), senarai semak pemeriksaan dan prosedur tindak balas kecemasan yang berkaitan dengan Sistem Kawalan Pencemaran Udara.

c) Memastikan semua kakitangan mematuhi keperluan PPE dan dasar alam sekitar, kesihatan dan keselamatan syarikat.

5. Dokumentasi & Pelaporan

a) Mengekalkan buku log operasi harian untuk sistem Penapis Beg dan Penggosok.

b) Rekodkan parameter pemantauan, aktiviti penyelenggaraan, keadaan luar biasa dan tindakan pembetulan yang telah diambil.

c) Mengekalkan rekod penggantian beg penapis, aktiviti servis penggosok dan senarai semak pemantauan prestasi yang tepat.

d) Menyediakan dan mengemukakan laporan pematuhan alam sekitar mingguan, bulanan dan suku tahunan kepada pihak pengurusan dan memastikan dokumentasi tersedia untuk pemeriksaan DOE.

Keperluan

Pensijilan Wajib

Mempunyai atau layak untuk mendapatkan:

Profesional Alam Sekitar Bertauliah dalam Operasi Penapis Beg (CePBFO)

dan/atau

Profesional Alam Sekitar Bertauliah dalam Operasi Penggosok (CePSO)

Dikeluarkan oleh Institut Alam Sekitar Malaysia (EiMAS) / Jabatan Alam Sekitar (JAS)

Keperluan Pengalaman

Calon mesti mempunyai minimum dua (2) tahun pengalaman dalam operasi Sistem Kawalan Pencemaran Udara (APCS), termasuk sistem Penapis Beg, sistem Penggosok, dan pemantauan pelepasan industri. Pengalaman dalam persekitaran pembuatan tekstil akan menjadi kelebihan tambahan.

Keperluan Pendidikan

Calon mesti memiliki Diploma atau Ijazah dalam Sains atau Kejuruteraan. Calon yang mempunyai Sijil Politeknik atau kelayakan SKM Tahap 2 juga boleh dipertimbangkan, dengan syarat mereka mempunyai sekurang-kurangnya satu (1) tahun pengalaman kerja yang berkaitan dalam operasi Sistem Kawalan Pencemaran Udara (APCS). Calon yang mempunyai kelayakan SPM boleh dipertimbangkan jika mereka mempunyai tiga (3) hingga lima (5) tahun pengalaman yang berkaitan dalam operasi APCS.

Faedah & Kebaikan

• Komisen dan bonus
• Kod pakaian kasual
• Insurans perubatan
• Cuti peribadi
• Cuti Sabatikal
• Peluang pembangunan peribadi
• Latihan dan pembangunan berbayar

主要職責

1. 監理合規性

a) 確保袋式過濾器和洗滌器系統按照 1974 年《環境品質法》、1978 年《清潔空氣條例》、第 40 條規定以及美國能源部關於性能監測的指導文件進行正確操作和維護。

b) 依照環境部 (DOE) 的要求，維護與空氣污染控制系統 (APCS) 相關的完整、準確的監測記錄。

c) 在檢查、合規性審計和執法訪問期間，擔任與能源部的主要聯絡人。

d) 確保空氣污染控制系統始終在能源部允許的排放限值內運作。

e) 根據美國能源部能力要求和適用的指導文件，執行或監督空氣污染控制系統的性能監控。

f) 向管理階層提供合規狀況建議，並在必要時建議採取糾正措施，以確保持續符合監管要求。

g) 促進和支持持續改善舉措，以提高空氣污染控制系統的效率、可靠性和合規性。

2. 日常運作與監控

a) 監測袋式除塵器的運作和性能，包括壓力差讀數、壓縮空氣脈衝清潔系統性能、濾袋狀況、料斗出料系統運作、鼓風機/風扇運轉和管路狀況，以確保系統高效運作。

b) 監控洗滌器系統的性能，包括循環泵運作、噴嘴狀況、氣流性能、化學加藥情況（如適用）和 pH 值監測（如適用），以確保有效控制排放。

c) 對空氣污染控制系統 (APCS) 進行例行檢查，發現異常運作情況，並立即採取糾正措施，以防止排放不合規和設備故障。

3. 系統維護與效能監控

a) 規劃、協調和監督袋式過濾器和洗滌器系統的預防性和糾正性維護活動，包括濾袋檢查和更換、管道檢查、鼓風機維修、料斗排放系統維護、洗滌器噴嘴清潔和循環泵維修。

b) 依照美國能源部的要求進行性能監測活動，並維護適當的檢查和監測記錄，以驗證系統有效性。

c) 確定並建議改善措施，以提高營運效率、系統可靠性和環境合規性。

4. 培訓與安全

a) 訓練和指導操作人員正確操作和監控袋式過濾器和洗滌器系統。

b) 協助制定和實施與空氣污染控制系統相關的標準作業程序 (SOP)、檢查清單和緊急應變程序。

c) 確保所有人員遵守個人防護裝備要求和公司環境、健康和安全政策。

5. 文件記錄與報告

a) 維護袋式過濾器和洗滌器系統的日常運作日誌。

b) 記錄監測參數、維護活動、異常情況和採取的糾正措施。

c) 保持濾袋更換、洗滌器維護活動和性能監控清單的準確記錄。

d) 準備並向管理階層提交每週、每月和每季的環境合規報告，並確保文件隨時可供美國能源部檢查。

要求

強制性認證

擁有或有資格獲得：

袋式過濾器操作認證環境專業人員 (CePBFO)

和/或

註冊環境專業人員（洗滌器操作方向）

由馬來西亞環境研究所 (EiMAS) / 環境部 (DOE) 發布

經驗要求

應徵者必須至少具備兩年空氣污染控制系統（APCS）操作經驗，包括袋式除塵器系統、洗滌器系統和工業排放監測。擁有紡織製造業經驗者優先考慮。

教育要求

應徵者須持有科學或工程專業的文憑或學位。持有理工學院證書或SKM二級資格證書的應徵者亦可考慮，但須具備至少一年空氣污染控制系統（APCS）運作相關工作經驗。持有SPM資格證書的應徵者，如具備三至五年APCS運作相關工作經驗，亦可考慮。

福利待遇

• 佣金和獎金
• 休閒著裝要求
• 醫療保險
• 個人休假
• 學術休假
• 個人發展機會
• 有薪培訓和發展

Key Responsibilities

• Participate in the end-to-end product development cycle for group and individual insurance products

• Perform pricing and profitability analysis, including assumption setting and financial modelling

• Prepare and submit product filings to regulators, ensuring compliance with relevant guidelines

• Develop and review benefit illustrations and product documentation

• Support product implementation, including system setup and cross-functional coordination

• Conduct product reviews and experience studies to monitor performance and recommend improvements

• Prepare management reports and analysis to support strategic decision-making
  

Requirements

• Bachelor’s Degree in Actuarial Science, Mathematics, Statistics, or related discipline

• Good progress in professional actuarial examinations

• 2–5 years of relevant experience in actuarial/product development within the insurance industry

• Strong analytical and problem-solving skills with high attention to detail

• Self-motivated, proactive, and able to work independently as well as in a team

• Good communication and stakeholder management skills

• Proficient in MS Office applications (especially Excel); knowledge of actuarial modelling tools is an added advantage

Product Business Development Executive | Automative Industry

• Work Location: Clementi, Singapore
• Working Hours: Mon – Fri 8am – 6pm
• Monthly Salary: Basic up to $4300
• Employment Type: Full time, Permanent Contract
• Provision company transport at Clementi MRT

Company Overview

The company is a well‑established Singapore‑based organization with a strong presence in both local and international markets. Recognized for the company’s commitment to quality, reliability, and innovation, the company provide effective solutions and services to a diverse range of clients across industries.

Responsibility

• Share and update product, pricing, and development information across the Group to ensure consistency and alignment.
• Liaise with principals on new product initiatives and identify potential business opportunities.
• Monitor market trends and gather performance feedback on proprietary brand products to support decision‑making.
• Compile and analyze Group volume data, preparing business plans to drive strategic growth.

Requirements

• Degree in Business, Marketing, International Business, or Supply Chain Management
• Minimum 3 years’ experience in Product Planning, Brand Management, or Business Development
• Proficient in Microsoft Office (Excel and Powerpoint)
• Experience with data analysis tools or ERP systems (SAP, Oracle) is an added advantage
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.

Recruit Lync Pte Ltd | EA License Number: 22C1000

Chen Hoe Nam | EA Personnel License: R25158678

We are seeking a highly motivated and results-driven Senior Product Development Engineer to join our innovative team. In this role, you will be responsible for the development and execution of product strategies to ensure our products meet customer needs and business objectives. You will collaborate cross-functionally with BD, engineering, marketing, Pre-Sales, and customer support to drive the lifecycle of products from concept through launch and beyond.

Key Responsibilities:

Product Strategy & Roadmap: Assist in the development and maintenance of the product roadmap, ensuring alignment with the company’s vision and strategic goals.

Customer-Centric Development: Define product requirements based on customer feedback, market trends, and competitor analysis.

Cross-Functional Collaboration: Work closely with BD, engineering, design, Pre-sales, and marketing teams to bring product features to market.

Product Launch: Lead the go-to-market strategy for new product launches and feature releases, ensuring that all stakeholders are aligned.

Lifecycle Management: Manage the full product lifecycle, including prioritizing feature enhancements, bug fixes, and performance optimizations.

Qualifications:

• Bachelor/Diploma in Engineering or related field
• 5 years or above of experience in product management or related fields (e.g., product marketing)
• Strong understanding of product development processes, agile methodologies
• Excellent verbal and written communication skills, with the ability to influence and align teams and stakeholders
• Ability to analyze complex problems, think strategically, and make data-informed decisions
• Strong customer-centric mindset with experience conducting customer interviews, surveys, and usability testing

Interested candidates can forward their CVs in MS Word format to connie@triton-ai.com

• Reg No. R1875181
• Triton AI Pte Ltd
• License no. 21C0661

As a senior individual contributor in System and Technology Product Group (STPG), you will provide technical leadership across the full learning loop of a test chip vehicle (TCV) - shaping pre-silicon simulation and regression strategy before tape-out, driving silicon debug after bring-up, and converting data into durable design, model, and methodology improvements for next-generation NAND flash memory products. This role is expected to independently identify risk, define solutions, and influence cross-functional technical direction.

Key Responsibilities

Pre-Silicon Simulation, Coverage & Regression Ownership

• Own pre-silicon‑ validation strategy for TCV, partnering with Design, Process, and TD to define what must be proven in simulation versus silicon.

• Develop, maintain, and execute robust simulation and regression frameworks (functional, parametric, stress, and corner) aligned to TCV objectives.

• Define coverage expectations and exit criteria for pre-silicon regressions, identifying‑ gaps and latent risks early.

• Analyze simulation results to surface architecture, device, and margin sensitivities, driving design updates and tape‑out readiness decisions.

• Establish and enforce simulation ↔ silicon correlation methodology to ensure modeling fidelity and learning continuity.

TCV Definition, Bring-Up & Silicon Validation

• Provide technical ownership for TCV bring-up from first silicon through full characterization readiness.

• Define probe enablement, trims, operating conditions, and debug strategies to accelerate stable and informative silicon access.

• Lead execution of electrical characterization plans validating array, periphery and experimental features against design and process intent.

• Drive deep root cause analysis for silicon anomalies, distinguishing design, process, model, or test limitations.

Test Content & Methodology Leadership

• Architect TCV specific test modes, patterns, and flows to maximize learning efficiency and data quality.

• Partner with Test Solutions Engineering (TSE) to influence probe architecture and infrastructure supporting TCV for protocol evolution.

• Define voltage, timing, and temperature stress strategies to expose true design and process limits beyond nominal behavior.

Cross-Functional Technical Leadership & Influence

• Serve as a go-to technical expert across Design, TD, Process and Test for TCV and early silicon topics.

• Translate simulation and silicon findings into clear, actionable recommendations that influence design fixes, model updates, and next generation architectures.

• Lead complex debug efforts with ambiguous data, setting technical direction by crystalizing multifaceted information.

• Role-model technical leadership through active mentoring and talent development to support Micron’s long-term success.

Data Analysis, Correlation & Knowledge Capture

• Spearhead AI adoption to perform advanced data analytics across large simulation and silicon datasets.

• Author high-impact technical documentation capturing learnings, best practices, and reusable methodologies for STPG and broader org consumption.

Requirements:

• Bachelor’s or post-graduate degree in Electrical/ Electronics/ Computer Engineering or related field, with minimum 5 years of relevant industrial experience.

• Strong fundamentals in CMOS/ MOSFET device physics, memory circuits, and semiconductor devices.

• Demonstrated experience owning pre-silicon simulation/regression and post-silicon test/ validation for complex designs.

• Strong capability in data analysis and scripting (Python, JMP, or equivalent) applied to large datasets.

• Proven ability to drive ambiguous technical problems to closure with minimal supervision.

• Deep experience with NAND Flash architectures, array/periphery interactions, and test chips is preferred.

• Working knowledge of DFT, probe test infrastructure, and failure analysis.

• Experience with firmware-assisted‑ test modes and experimental silicon features.

• Exposure to automation, ML/AI, or advanced analytics applied to simulation and silicon learning loops.

• Candidates may be considered for higher job grades if they exceed 10 years of relevant experience.

Who we are

Open Government Products is a team of engineers, designers, and product managers who build technology for public good. We identify problem spaces where technology can help, test prototypes with real users, then bring the best ones to launch. We keep our hierarchy flat so we can push past bureaucracy to focus on delivery. With 70% of our initiatives starting from the ground up, you will have real ownership over products that shape how citizens interact with their government. To learn more about us and the products we’ve built, visit open.gov.sg

About the Role

This role sits across two HealthTech products. Referral Exchange digitises healthcare referrals across providers as part of the National Referrals Programme led by MOH. It guides staff through referral creation, handles routing and tracking across healthcare providers, and is expanding across existing healthcare IT systems. The Health Appointment System (HAS) is the national booking system for preventive care across 1000+ CHAS GP clinics, where citizens check eligibility, see subsidy costs upfront, and book vaccinations and screenings.

You would own both problem spaces end to end. The design work spans officer-facing tools where referral accuracy and information density are critical, citizen-facing flows where complex subsidy logic needs to feel simple, and the service design underneath both: understanding how services work across multiple providers before you design the interfaces that support them.

Responsibilities

Own complex problem spaces end to end.

You will lead the design of products that span multiple agencies, user types, and policy dependencies. This means understanding how services work before designing the interfaces that support them.

Create clarity from ambiguous, conflicting inputs.

Different stakeholders use different terminology and have different priorities. You will synthesise these into shared models that the team can design and build from.

Design for users working under operational pressure.

Many of our users are scanning dense case lists and dashboards to make quick decisions. You will need to balance information density with clarity.

Design citizen-facing experiences that simplify complex logic.

On HAS, eligibility rules and subsidy structures need to feel simple to the person booking an appointment, regardless of the complexity underneath.

Build relationships that make adoption possible.

Healthcare environments are cautious about new tools. You will invest in stakeholder trust early and consistently.

Prototype early and test often.

Get ideas in front of healthcare staff, GPs, service providers, and citizens quickly.

Minimum Qualifications

• At least 6 years experience in designing in a product-focused setting.

• A portfolio demonstrating strong craft, clear design reasoning, and experience shipping complex products in multi-stakeholder environments.

• Hands-on experience running user research and translating findings into product decisions.

• Experience designing information-dense interfaces (dashboards, case management tools, operational views) for users working under time pressure.

• Experience navigating conflicting requirements across teams or organisations and creating shared clarity.

• High proficiency in Figma.

Preferred Qualifications

• Experience working across multiple institutional stakeholders with competing priorities.

• Experience designing both citizen-facing and officer-facing surfaces within the same product ecosystem.

• Experience with service design: mapping end-to-end workflows, identifying handovers between actors, and designing for multi-actor systems.

• Active use of modern prototyping tools (Lovable, Cursor, or similar) to bring ideas to life earlier.

• Familiarity with front-end development concepts.

• Prior exposure to healthcare operations, community care, or public health systems.

Working at OGP

Ownership and Autonomy — Beyond technical tasks, this means having autonomy to voice opinions and suggest future directions. Building what you believe in drives the creation of great solutions.

Rapid Prototyping — We prioritise testing ideas over debating them, allowing us to identify problems quickly and convey possibilities to others. This fail-fast approach accelerates innovation.

Flexibility — We provide flexible work arrangements based on what works best for our team and its members, fostering a productive and supportive environment.

Continuous Learning — Drive professional growth by exploring new architectures, frameworks, and technologies. With dedicated yearly learning months and hackathons, continuous learning is essential as we tackle innovative ideas and challenges.

Mission-Driven — Our work is dedicated to the public good, aiming to improve the lives of Singapore citizens. We focus on creating impactful solutions that enhance the community and the place we call home.

Projects OGP has worked on include:

Bright - Bright is a referral platform for intermediate to long-term care services. Healthcare workers and coordinators can find, refer, and track clients to ILTC services such as nursing homes and daycare centres, while service providers manage their referrals and availabilities.

Care360 - Care360 is a patient management system that helps Medical Social Workers manage their patients' financial and psychosocial care, reducing manual work and providing access to holistic data across institutions.

Health Appointment System (HAS) - HAS is the national booking system for preventive care at CHAS GP clinics, where citizens check eligibility, see subsidy costs upfront, and book vaccinations and screenings.

Referral Exchange - Referral Exchange digitises healthcare referrals across providers as part of the National Referrals Programme led by MOH, guiding staff through referral creation and tracking across healthcare systems.

Rooster - Rooster is a healthcare messaging system that automatically sends critical result alerts to the right clinician at the right time, based on staff schedules and medical specialties.

Scribe - Scribe is a transcription and summarisation tool that transforms conversations into structured summaries, so practitioners can focus on staying present with clients instead of documentation.

Social360 - Social360 is a practitioner-centric case management system designed to maximise social workers' time with clients by streamlining key tasks and removing administrative overhead.

With over 40 products in different phases, report cards are our way of sharing what we do transparently. We're as open about our wins as we are our areas for improvement. Explore all products

Job Summary

Lead and manage a team of 15-20 workers to execute assigned jobs efficiently. Coordinate with main contractors and clients to ensure production schedules and progress meet project requirements. Prepare job costing, quotations, and claims while negotiating effectively to support project success.

Responsibilities

• Lead and supervise a team of 15-20 workers to complete assigned jobs on schedule and to quality standards
• Coordinate with main contractors and clients to communicate production schedules and monitor job progress
• Calculate completed work quantities accurately to support claim preparation
• Prepare and submit detailed job quotations and costing to support project budgeting
• Submit claims and negotiate with main contractors and clients to resolve issues and secure approvals

Preferred competencies and qualifications

• Minimum 6 years of relevant experience, preferably with piping system expertise

Job Overview

We are seeking a hands-on and detail-oriented Senior Product Designer (Consumer Product Development) to join our team. This role focuses on designing and developing baby and maternity consumer products for the U.S. market, covering the full product development cycle from early market research through production. You will work closely with internal teams and external vendors to translate customer needs into functional, safe, and manufacturable designs while balancing design intent with cost, quality, and production timelines.

Responsibilities

1. Market Research & Design Thinking

• Conduct independent market research to identify trends, customer needs, and competitor insights, with a focus on the U.S. baby and maternity market.

• Analyse customer feedback and market data to identify product gaps and new opportunities.

• Translate research findings into clear product requirements, including user needs, functional specifications, materials considerations, and design criteria.

2. Concept Development & Design Execution

• Generate multiple concept directions for each project using sketches, 2D layouts, and 3D models.

• Refine selected concepts with clear design rationale and attention to usability, safety, and aesthetics.

• Ensure designs are functional, user-centric, safe, and manufacturable, balancing creativity with cost, quality, and timeline constraints.

3. Technical Documentation & Sampling

• Create accurate, supplier-ready documentation, including measurements, specifications, construction details, materials and trim callouts, and artwork files where applicable.

• Maintain organised files and strong version control throughout the development process.

• Review prototypes and samples, identify issues, and provide clear, actionable feedback to drive design and quality improvements.

4. Supplier & Cross-Functional Collaboration

• Liaise directly with suppliers to confirm feasibility related to materials, construction methods, processes, and tooling.

• Clarify technical questions and resolve design or production issues in collaboration with suppliers.

• Collaborate with cross-functional teams to align on design intent, feasibility, and development timelines.

• Present research findings, concepts, and design decisions clearly to internal stakeholders.

5. Project & Priority Management

• Manage multiple design projects concurrently across different development stages.

• Adapt quickly to evolving requirements, timelines, and feedback while maintaining a high standard of design execution.

Requirements

• Minimum 2 years of product or industrial design experience (consumer goods preferred; baby or parenting products are a plus).

• Proficiency in 2D and 3D design software (e.g. Adobe Illustrator and Photoshop; CAD tools such as Rhino, SolidWorks, KeyShot, and related formats including .STP, .OBJ, and .3DS).

• Strong ability to work independently and take ownership of projects, while also collaborating effectively within a team.

• Comfortable working in a fast-paced environment and meeting deadlines.

• Detail-oriented with strong organisational and problem-solving skills.

• Fluent in Mandarin to communicate effectively with China-based suppliers

Our client is a leading manufacturer of precision plastic components.. They are looking for a Product Development and Management Executive to assist their team for the next phrase of their business. They are located in the West area – easily accessible.

Responsibilities:

• Lead new product ideation and concept development through market research, customer insights, and industry trend analysis.
• Manage end-to-end New Product Development (NPD) including sourcing contract manufacturers, working with formulators, and coordinating product development activities.
• Ensure regulatory and technical compliance by preparing technical documentation and supporting label, formula, and ingredient reviews.
• Collaborate cross-functionally with Regulatory, Quality, Marketing, and external suppliers to drive product development and launch readiness.
• Support product launch activities by preparing technical materials, product costing, pricing analysis, and conducting product training.
• Monitor post-launch product performance and drive continuous improvements while managing supplier communications and quality-related actions.

Requirements:

• Min Degree in Nutrition, Pharmacy, Chemistry or relevant.
• Experience in product development/ management in the dietary supplement and health food industry will be added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115141 (Tan Su Yee)

Our client is a leading manufacturer of precision plastic components.. They are looking for a Product Development and Management Executive to assist their team for the next phrase of their business. They are located in the West area – easily accessible.

Responsibilities:

• Lead new product ideation and concept development through market research, customer insights, and industry trend analysis.
• Manage end-to-end New Product Development (NPD) including sourcing contract manufacturers, working with formulators, and coordinating product development activities.
• Ensure regulatory and technical compliance by preparing technical documentation and supporting label, formula, and ingredient reviews.
• Collaborate cross-functionally with Regulatory, Quality, Marketing, and external suppliers to drive product development and launch readiness.
• Support product launch activities by preparing technical materials, product costing, pricing analysis, and conducting product training.
• Monitor post-launch product performance and drive continuous improvements while managing supplier communications and quality-related actions.

Requirements:

• Min Degree in Nutrition, Pharmacy, Chemistry or relevant.
• Experience in product development/ management in the dietary supplement and health food industry will be added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115141 (Tan Su Yee)

THE ROLE:

We are the high-end test engineering team providing test solutions for Data Center New Product Introduction (NPI) under the Product Engineering Organization. We do exciting product development for leading-edge technology that will power the next generation processors used for high performance computing, data centers, and enterprise servers.

If you are looking for a fulfilling and challenging career as an engineer leading SLT (System Level Test) IVR (Integrated Voltage Regulator) Engineer, you are at the right place! In this role, you will be responsible for defining, driving and enabling SLT test solution with on-chip integrated voltage regulator to meet NPI business milestones and KPI (test time, yield, cost, quality). The expectation is to perform leadership to interact with Silicon/Board/Power design teams, Product & Test Engineering teams, Customer Quality teams, software & platform teams to bring new product from first silicon to HVM (High Volume Manufacturing) with aggressive schedule. You will experience working with and learning from AMD’s talented engineering teams around the world.

THE PERSON:

We are looking for someone with strong technical, analytical, leadership and problem-solving skills, as well as demonstrating the characteristic of an independent and resourceful individual. The applicant must have a proficient understanding of High Power Delivery (above 1kW) design, power capacitors and inductors, buck/boost converters, and ideally has experience with IVR (Integrated Voltage Regulator) as well as a broad understanding of silicon VFT (Voltage/Frequency/Temperature) behavior, on-die silicon power integrity, and system level power management etc.

KEY RESPONSIBILITIES:

• Accountable to provide leadership to meet business milestone, cost and quality in GPU system level test area.
• Collaborate with internal teams to drive IVR (Integrated Voltage Regulator) SLT swim lane from pre-silicon, ASIC initial bring up to HVM (High Volume Manufacturing)
• Solves complex, novel, and non-recurring problems; initiates significant changes to existing processes/methods and leads development and implementation
• Conduct engineering evaluations and analysis to qualify cutting-edge IVR for HVM and drive closure of GPU production issues
• Profile or characterize PI (Power Integrity), voltage droop, or power delivery issue observed on SLT platforms in collaboration with board/silicon designers
• Involves collaboration on or assuming the consultative or leadership responsibilities for a specific project or for product development initiatives
• May provide technical supervision or mentoring junior engineers
• Upscale overall team capabilities on low level system debug for AMD data center product families

PREFERRED EXPERIENCE:

• Experience and with good understanding of Power Delivery design for high power GPU product (above 1kW), and knowledge in state-of-the-art of IVR (Integrated Voltage Regulator)
• Strong expertise with using analyzers and oscilloscopes, and other debug tools
• Knowledge and working experience on GPU and HBM architecture, SoC design and SoC power management features are a strong plus
• Strong and effective presentation, written and verbal communication skills, and the ability to work with geographically distributed product engineering teams
• Proficiency in Windows, and Linux operating systems
• Basic scripting proficiency for automation (Shell script, Perl, Ruby, Python)
• 8 years or more industry experience

ACADEMIC CREDENTIALS:

• BS/MS Electrical Engineering, Computer Engineering, or comparable disciplines

LOCATION:

Singapore

Our client is a leading manufacturer of precision plastic components.. They are looking for a Product Development and Management Executive to assist their team for the next phrase of their business. They are located in the West area – easily accessible.

Responsibilities:

• Lead new product ideation and concept development through market research, customer insights, and industry trend analysis.
• Manage end-to-end New Product Development (NPD) including sourcing contract manufacturers, working with formulators, and coordinating product development activities.
• Ensure regulatory and technical compliance by preparing technical documentation and supporting label, formula, and ingredient reviews.
• Collaborate cross-functionally with Regulatory, Quality, Marketing, and external suppliers to drive product development and launch readiness.
• Support product launch activities by preparing technical materials, product costing, pricing analysis, and conducting product training.
• Monitor post-launch product performance and drive continuous improvements while managing supplier communications and quality-related actions.

Requirements:

• Min Degree in Nutrition, Pharmacy, Chemistry or relevant.
• Experience in product development/ management in the dietary supplement and health food industry will be added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115141 (Tan Su Yee)

THE ROLE:

As a senior staff member of the product characterization team, you will evaluate the performance of AMD AECG products, develop, lead and characterize the next generation Memory Controller IPs.

THE PERSON:

• Strongly motivated individual from post-silicon validation background.
• Excellent communication and presentation skills, demonstrated through technical publications, presentations, training, executive briefings, etc.
• Adept at collaboration and mentorship skills to train and guide fellow engineers and elevate the skills of the team around you.

KEY RESPONSIBILITIES:

• Gain expertise into the AMD SoC architecture to characterize next generation Memory Subsystem (Controller, PHY and IO) for various supported protocols such as DDR4, LPDDR4, DDR5, LPDDR5, DDR6 and LPDDR6.
• Understand Pattern development nuances and guide the team for bench data collection and debug with lab instruments when necessary.
• Work closely with cross functional teams from design and firmware side to identify key new features, firmware stability and ensure proper test coverage for the same.
• Drive continuous improvement initiatives on automated test scripts and test frameworks for efficient data collection, test-time optimization and data analysis.
• Stay updated with the latest developments in Memory specifications and trends to inform product strategy and direction
• Statistical data analysis to post process volume results for data correlation across Process corners and outlier analysis.
• Responsible for isolating the issue to a specific area such as test gaps, SW bug, silicon bug, or process deviation using bench setup and instill good debug practices in the team.
• Drive cross-functional discussions to address the issues uncovered from debugs and collaborate for ensuring screens are in-place for gaps identified.

PREFERRED EXPERIENCE:

• Extensive years of experience into post-silicon validation with strong background on SoC validation and system level testing.
• Technical leadership experience leading a small group of senior engineers.
• Strong understanding of ARM SoC architecture and Memory protocols such as DDR5 and LPDDR5.
• Experienced on bench testing and debug skills with lab instruments usage.
• Proficiency in using test equipment such as oscilloscopes, logic analyzers and protocol analyzers.
• Experienced in Linux environment, data analysis and scripting languages (e.g. Python, Perl) for automation and data processing.
• Strong communication and leadership skills, including data presentation and ability to work well in a group environment that spans across continents.
• Experience with AMD/Xilinx Vivado and FPGA design flow is a plus.

ACADEMIC CREDENTIALS:

• BS in EE, CS, ECE or related field; MS preferred.