Total 112 Others technology development job vacancies in Manufacturing / Production category in Singapore

Key Responsibilities

1. Regulatory Compliance

a) Ensure Bag Filter and Scrubber systems are properly operated and maintained in compliance with the Environmental Quality Act 1974, Clean Air Regulations 1978, Regulation 40 requirements, and the DOE Guidance Document on Performance Monitoring.

b) Maintain complete and accurate monitoring records related to Air Pollution Control Systems (APCS) in accordance with Department of Environment (DOE) requirements.

c) Act as the main liaison person with DOE during inspections, compliance audits, and enforcement visits.

d) Ensure Air Pollution Control Systems operate within DOE permissible emission limits at all times.

e) Perform or supervise performance monitoring of Air Pollution Control Systems in accordance with DOE competency requirements and applicable guidance documents.

f) Advise management on compliance status and recommend corrective actions where necessary to ensure continuous regulatory compliance.

g) Promote and support continuous improvement initiatives to enhance the efficiency, reliability, and compliance performance of Air Pollution Control Systems.

2. Daily Operation & Monitoring

a) Monitor the operation and performance of the Bag Filter system, including differential pressure readings, compressed air pulse cleaning system performance, filter bag condition, hopper discharge system operation, blower/fan operation, and ducting condition to ensure efficient system performance.

b) Monitor the performance of the Scrubber system, including circulation pump operation, spray nozzle condition, airflow performance, chemical dosing condition (if applicable), and pH monitoring (if applicable) to ensure effective emission control.

c) Conduct routine inspections of Air Pollution Control Systems (APCS), identify abnormal operating conditions, and implement prompt corrective actions to prevent emission non-compliance and equipment failure.

3. System Maintenance & Performance Monitoring

a) Plan, coordinate, and supervise preventive and corrective maintenance activities for Bag Filter and Scrubber systems, including filter bag inspection and replacement, ducting inspection, blower servicing, hopper discharge system maintenance, scrubber nozzle cleaning, and circulation pump servicing.

b) Carry out performance monitoring activities in accordance with DOE requirements and maintain proper inspection and monitoring records to verify system effectiveness.

c) Identify and recommend improvement measures to enhance operational efficiency, system reliability, and environmental compliance performance.

4. Training & Safety

a) Train and guide operators on proper operation and monitoring of Bag Filter and Scrubber systems.

b) Assist in the development and implementation of Standard Operating Procedures (SOPs), inspection checklists, and emergency response procedures related to Air Pollution Control Systems.

c) Ensure all personnel comply with PPE requirements and company environmental, health, and safety policies.

5. Documentation & Reporting

a) Maintain daily operation logbooks for Bag Filter and Scrubber systems.

b) Record monitoring parameters, maintenance activities, abnormal conditions, and corrective actions taken.

c) Maintain accurate records of filter bag replacements, scrubber servicing activities, and performance monitoring checklists.

d) Prepare and submit weekly, monthly, and quarterly environmental compliance reports to management and ensure documentation is readily available for DOE inspections.

Requirements

Mandatory Certification

Possess or be eligible to obtain:

Certified Environmental Professional in Bag Filter Operation (CePBFO)

and/or

Certified Environmental Professional in Scrubber Operation (CePSO)

Issued by Environment Institute of Malaysia (EiMAS) / Department of Environment (DOE)

Experience Requirement

Candidates must have a minimum of two (2) years of experience in Air Pollution Control System (APCS) operation, including Bag Filter systems, Scrubber systems, and industrial emission monitoring. Experience in the textile manufacturing environment will be an added advantage.

Education Requirement

Candidates must possess a Diploma or Degree in Science or Engineering. Candidates with a Polytechnic Certificate or SKM Level 2 qualification may also be considered, provided they have at least one (1) year of relevant working experience in Air Pollution Control System (APCS) operation. Candidates with SPM qualification may be considered if they have three (3) to five (5) years of relevant experience in APCS operation.

Perks & Benefits

• Commission and bonus
• Casual dress code
• Medical insurance
• Personal leave
• Sabbatical leave
• Personal development opportunities
• Paid training and development

Tanggungjawab Utama

1. Pematuhan Kawal Selia

a) Pastikan sistem Penapis Beg dan Penggosok dikendalikan dan diselenggara dengan betul mengikut Akta Kualiti Alam Sekitar 1974, Peraturan Udara Bersih 1978, keperluan Peraturan 40 dan Dokumen Panduan DOE mengenai Pemantauan Prestasi.

b) Mengekalkan rekod pemantauan yang lengkap dan tepat berkaitan Sistem Kawalan Pencemaran Udara (APCS) mengikut keperluan Jabatan Alam Sekitar (JAS).

c) Bertindak sebagai orang perhubungan utama dengan DOE semasa pemeriksaan, audit pematuhan dan lawatan penguatkuasaan.

d) Pastikan Sistem Kawalan Pencemaran Udara beroperasi dalam had pelepasan yang dibenarkan oleh DOE pada setiap masa.

e) Melaksanakan atau menyelia pemantauan prestasi Sistem Kawalan Pencemaran Udara mengikut keperluan kecekapan DOE dan dokumen panduan yang berkenaan.

f) Menasihati pihak pengurusan tentang status pematuhan dan mengesyorkan tindakan pembetulan jika perlu bagi memastikan pematuhan kawal selia yang berterusan.

g) Menggalakkan dan menyokong inisiatif penambahbaikan berterusan untuk meningkatkan kecekapan, kebolehpercayaan dan prestasi pematuhan Sistem Kawalan Pencemaran Udara.

2. Operasi & Pemantauan Harian

a) Pantau operasi dan prestasi sistem Penapis Beg, termasuk bacaan tekanan pembezaan, prestasi sistem pembersihan denyut udara termampat, keadaan beg penapis, operasi sistem pelepasan corong, operasi peniup/kipas dan keadaan saluran untuk memastikan prestasi sistem yang cekap.

b) Pantau prestasi sistem Scrubber, termasuk operasi pam edaran, keadaan muncung semburan, prestasi aliran udara, keadaan dos kimia (jika berkenaan), dan pemantauan pH (jika berkenaan) untuk memastikan kawalan pelepasan yang berkesan.

c) Menjalankan pemeriksaan rutin Sistem Kawalan Pencemaran Udara (APCS), mengenal pasti keadaan operasi yang tidak normal dan melaksanakan tindakan pembetulan segera untuk mencegah ketidakpatuhan pelepasan dan kegagalan peralatan.

3. Penyelenggaraan & Pemantauan Prestasi Sistem

a) Merancang, menyelaras dan menyelia aktiviti penyelenggaraan pencegahan dan pembetulan untuk sistem Penapis Beg dan Penggahar, termasuk pemeriksaan dan penggantian beg penapis, pemeriksaan saluran, servis peniup, penyelenggaraan sistem pelepasan corong, pembersihan muncung penggahar dan servis pam edaran.

b) Menjalankan aktiviti pemantauan prestasi mengikut keperluan DOE dan menyelenggara rekod pemeriksaan dan pemantauan yang betul untuk mengesahkan keberkesanan sistem.

c) Mengenal pasti dan mengesyorkan langkah-langkah penambahbaikan untuk meningkatkan kecekapan operasi, kebolehpercayaan sistem dan prestasi pematuhan alam sekitar.

4. Latihan & Keselamatan

a) Melatih dan membimbing pengendali tentang pengendalian dan pemantauan sistem Penapis Beg dan Penggosok yang betul.

b) Membantu dalam pembangunan dan pelaksanaan Prosedur Operasi Standard (SOP), senarai semak pemeriksaan dan prosedur tindak balas kecemasan yang berkaitan dengan Sistem Kawalan Pencemaran Udara.

c) Memastikan semua kakitangan mematuhi keperluan PPE dan dasar alam sekitar, kesihatan dan keselamatan syarikat.

5. Dokumentasi & Pelaporan

a) Mengekalkan buku log operasi harian untuk sistem Penapis Beg dan Penggosok.

b) Rekodkan parameter pemantauan, aktiviti penyelenggaraan, keadaan luar biasa dan tindakan pembetulan yang telah diambil.

c) Mengekalkan rekod penggantian beg penapis, aktiviti servis penggosok dan senarai semak pemantauan prestasi yang tepat.

d) Menyediakan dan mengemukakan laporan pematuhan alam sekitar mingguan, bulanan dan suku tahunan kepada pihak pengurusan dan memastikan dokumentasi tersedia untuk pemeriksaan DOE.

Keperluan

Pensijilan Wajib

Mempunyai atau layak untuk mendapatkan:

Profesional Alam Sekitar Bertauliah dalam Operasi Penapis Beg (CePBFO)

dan/atau

Profesional Alam Sekitar Bertauliah dalam Operasi Penggosok (CePSO)

Dikeluarkan oleh Institut Alam Sekitar Malaysia (EiMAS) / Jabatan Alam Sekitar (JAS)

Keperluan Pengalaman

Calon mesti mempunyai minimum dua (2) tahun pengalaman dalam operasi Sistem Kawalan Pencemaran Udara (APCS), termasuk sistem Penapis Beg, sistem Penggosok, dan pemantauan pelepasan industri. Pengalaman dalam persekitaran pembuatan tekstil akan menjadi kelebihan tambahan.

Keperluan Pendidikan

Calon mesti memiliki Diploma atau Ijazah dalam Sains atau Kejuruteraan. Calon yang mempunyai Sijil Politeknik atau kelayakan SKM Tahap 2 juga boleh dipertimbangkan, dengan syarat mereka mempunyai sekurang-kurangnya satu (1) tahun pengalaman kerja yang berkaitan dalam operasi Sistem Kawalan Pencemaran Udara (APCS). Calon yang mempunyai kelayakan SPM boleh dipertimbangkan jika mereka mempunyai tiga (3) hingga lima (5) tahun pengalaman yang berkaitan dalam operasi APCS.

Faedah & Kebaikan

• Komisen dan bonus
• Kod pakaian kasual
• Insurans perubatan
• Cuti peribadi
• Cuti Sabatikal
• Peluang pembangunan peribadi
• Latihan dan pembangunan berbayar

主要職責

1. 監理合規性

a) 確保袋式過濾器和洗滌器系統按照 1974 年《環境品質法》、1978 年《清潔空氣條例》、第 40 條規定以及美國能源部關於性能監測的指導文件進行正確操作和維護。

b) 依照環境部 (DOE) 的要求，維護與空氣污染控制系統 (APCS) 相關的完整、準確的監測記錄。

c) 在檢查、合規性審計和執法訪問期間，擔任與能源部的主要聯絡人。

d) 確保空氣污染控制系統始終在能源部允許的排放限值內運作。

e) 根據美國能源部能力要求和適用的指導文件，執行或監督空氣污染控制系統的性能監控。

f) 向管理階層提供合規狀況建議，並在必要時建議採取糾正措施，以確保持續符合監管要求。

g) 促進和支持持續改善舉措，以提高空氣污染控制系統的效率、可靠性和合規性。

2. 日常運作與監控

a) 監測袋式除塵器的運作和性能，包括壓力差讀數、壓縮空氣脈衝清潔系統性能、濾袋狀況、料斗出料系統運作、鼓風機/風扇運轉和管路狀況，以確保系統高效運作。

b) 監控洗滌器系統的性能，包括循環泵運作、噴嘴狀況、氣流性能、化學加藥情況（如適用）和 pH 值監測（如適用），以確保有效控制排放。

c) 對空氣污染控制系統 (APCS) 進行例行檢查，發現異常運作情況，並立即採取糾正措施，以防止排放不合規和設備故障。

3. 系統維護與效能監控

a) 規劃、協調和監督袋式過濾器和洗滌器系統的預防性和糾正性維護活動，包括濾袋檢查和更換、管道檢查、鼓風機維修、料斗排放系統維護、洗滌器噴嘴清潔和循環泵維修。

b) 依照美國能源部的要求進行性能監測活動，並維護適當的檢查和監測記錄，以驗證系統有效性。

c) 確定並建議改善措施，以提高營運效率、系統可靠性和環境合規性。

4. 培訓與安全

a) 訓練和指導操作人員正確操作和監控袋式過濾器和洗滌器系統。

b) 協助制定和實施與空氣污染控制系統相關的標準作業程序 (SOP)、檢查清單和緊急應變程序。

c) 確保所有人員遵守個人防護裝備要求和公司環境、健康和安全政策。

5. 文件記錄與報告

a) 維護袋式過濾器和洗滌器系統的日常運作日誌。

b) 記錄監測參數、維護活動、異常情況和採取的糾正措施。

c) 保持濾袋更換、洗滌器維護活動和性能監控清單的準確記錄。

d) 準備並向管理階層提交每週、每月和每季的環境合規報告，並確保文件隨時可供美國能源部檢查。

要求

強制性認證

擁有或有資格獲得：

袋式過濾器操作認證環境專業人員 (CePBFO)

和/或

註冊環境專業人員（洗滌器操作方向）

由馬來西亞環境研究所 (EiMAS) / 環境部 (DOE) 發布

經驗要求

應徵者必須至少具備兩年空氣污染控制系統（APCS）操作經驗，包括袋式除塵器系統、洗滌器系統和工業排放監測。擁有紡織製造業經驗者優先考慮。

教育要求

應徵者須持有科學或工程專業的文憑或學位。持有理工學院證書或SKM二級資格證書的應徵者亦可考慮，但須具備至少一年空氣污染控制系統（APCS）運作相關工作經驗。持有SPM資格證書的應徵者，如具備三至五年APCS運作相關工作經驗，亦可考慮。

福利待遇

• 佣金和獎金
• 休閒著裝要求
• 醫療保險
• 個人休假
• 學術休假
• 個人發展機會
• 有薪培訓和發展

Responsibilities:

• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (YHQ or Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on sourcesystems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info
• Perform ad-hoc retrieval of order/production/sales data to support incident
• Investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info systems / Computer Science

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tan Sin Yong (Stella)

EA Personnel Reg No: R24124127

Key Responsibilities

• Participate in the end-to-end product development cycle for group and individual insurance products

• Perform pricing and profitability analysis, including assumption setting and financial modelling

• Prepare and submit product filings to regulators, ensuring compliance with relevant guidelines

• Develop and review benefit illustrations and product documentation

• Support product implementation, including system setup and cross-functional coordination

• Conduct product reviews and experience studies to monitor performance and recommend improvements

• Prepare management reports and analysis to support strategic decision-making
  

Requirements

• Bachelor’s Degree in Actuarial Science, Mathematics, Statistics, or related discipline

• Good progress in professional actuarial examinations

• 2–5 years of relevant experience in actuarial/product development within the insurance industry

• Strong analytical and problem-solving skills with high attention to detail

• Self-motivated, proactive, and able to work independently as well as in a team

• Good communication and stakeholder management skills

• Proficient in MS Office applications (especially Excel); knowledge of actuarial modelling tools is an added advantage

Join a well-established automation company with 36 years of industry experience delivering custom machinery and integrated production line solutions across Asia and beyond.

We are looking for a hands-on Assembly Technician to support machine assembly, setup, and project execution. This role offers valuable technical exposure and overseas project opportunities.

Why Join Us?

Position Summary

The Engineer, Product Development is responsible for the development and establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issues and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
• Any other ad-hoc duties as assigned.

Requirements

• Bachelor’s Degree in Materials Science, Microelectronics, Electrical, Chemical engineering or similar disciplines
• At least 3 years of experience in product development or NPI work in area of Wafer-level Fanout packaging production line or LCD/FPD production line, focusing on processes such as:

1. Die Preparation/ Recon
2. AOI/ Lithography/ Wet etch
3. Backend

• Knowledge in process engineering, process control engineering and yield enhancement
• Experience in DOE, FMEA, and 8D reports

This position will support Hard Coat and Anti Fog Product Development projects to build a commercially viable functional coating product pipeline in alignment with SDC business goals.

Responsibilities:

• Lead or assist projects in product development milestone attainment including competitive benchmarking, product formulation and optimization, establishment of manufacturing control plan for scale-up and production
• Screen and qualify alternative key raw materials to facilitate sustained supply of functional coating and film products
• Generate ideas and proofs-of-concept for new technologies for proprietary product and intellectual property development
• Leverage new and innovative building blocks to accelerate development of proprietary value-added functional coatings
• Provide support for development of new equipment, formulas, processes, and methods for solution of technical problems.
• Provide investigation support on newly developed and scale-up manufactured products to improve quality by research into composition, structure, properties, relationships, and reactions of matter
• Confer with Vendors, Scientists and Engineers regarding product development
• Prepare standards and specifications for processes, instruments, products and tests
• Document and communicate effectively internally with cross-functional teams

Requirements:

• Bachelor’s degree in chemistry or related field and minimum two years Coatings and Specialty Chemicals industry experience, or equivalent combination of education and experience
• Familiarity with a variety of Chemical Coatings Industry’s concepts, practices, and procedures
• Stay current with outside growth of technology, including new coating building blocks and processes
• Highly self-motivated with good presentation skills
• Proficient in Microsoft Word, Power Point, and Excel
• Willing to work at Tuas South

Position Summary

The Engineer, Product Development (Fresh Grad) is responsible for the developmentand establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issues and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
• Any other ad-hoc duties as assigned.

Requirements

• At least a Bachelor’s Degree in Materials Science, Microelectronics, Electrical or Chemical engineering.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in DOE, FMEA, and 8D reports.
• Prior experience in the semiconductor industry would be an added advantage.

Responsibilities:

1. Ideation of Product Proposition

• Be part of the ideation squad (which consist of members from different departments) for your assigned product to participate in brainstorming and conceptualisation of product propositions that will meet the needs (pain points) of the specific customer segment.
• Work with the Customer Insights and Research team to prepare and conduct customer research (e.g. via surveys, interviews) to gather customer feedback.
• Engage other relevant stakeholders to test out product propositions (including price points) and revise product design accordingly (iterative process) until the optimal product design with a strong proposition is formed.
• Assist team lead in preparing the presentation deck to share ideas to a wider group, including management, to get their buy-in on the product proposition.

2. Product Approval

• Assist team lead in the preparation of business case (including business objectives and justifications) and the necessary materials for product approval.
• Assist team lead in the preparation of all other materials required for product approval within the product approval framework.
• Engage other relevant approving stakeholders to ensure that they provide their sign-off in a timely manner so that launch date is not compromised.

3. Product Delivery and Launch Preparation

• Assist the team lead in the preparation of materials for product discussion with downstream stakeholders to ensure they have a comprehensive understanding of the product proposition, intent and design for the purpose of implementation.
• Drafting of policy documents and product summaries, and co-ordinate the circulation of materials to relevant stakeholders to obtain feedback and final sign-off.
• Assist the team lead in the preparation of marketing brief for engagement and discussion with Customer Marketing and Propositions team for the purpose of designing marketing materials that speaks to the target customer segment.

4. Post-Sales Monitoring and Tracking

• Assist the team lead in the extraction of sales data on a timely manner from launch.
• Work together with the team lead on the monitoring of sales of products launched, e.g. is sales aligned with expected, who are the actual customers buying, are they aligned with who we expect the target segment to be, who are the reps selling, etc.
• Work with the team lead for a presentation deck to present analysis and findings to a broader group of stakeholders, including management.
• Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks.
• Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company.
• Highlights any potential concerns /risks and proactively shares best risk management practices.

Requirements:

• Tertiary education qualification in Actuarial, Insurance, Finance, Marketing, or related fields.
• 4 to 5 years of relevant experience, preferably in product development or sales propositions.
• Strong analytical skills with a creative mindset for generating ideas and solutions.
• Excellent communication skills for effective stakeholder engagement and persuasion.
• Exceptional planning, organizational, and interpersonal skills.
• A proactive, action-oriented individual who thrives under pressure and tight deadlines.
• High integrity with a strong sense of accountability and teamwork.
• Initiative to improve existing processes and adaptability to change.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified. 

EA License No.: 01C4394 (PERSOL Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy 

THE ROLE:

We are the New Product Introduction (NPI) test engineering team defining and providing test solutions for AMD’s High Performance Compute products in a fast-paced environment under the Product Engineering Organization.

If you are looking for a fulfilling and challenging career as an high end leader leading NPI System Level Test (SLT) Product Development, you are at the right place! As a Senior Manager in SLT Product Development Engineering, you will be responsible for growth and develop high performance SLT team to drive SLT solutions to address upcoming technology development, NPI business milestones and KPI (test time, yield, cost, quality). The expectation is to be in a position of leadership, collaborating with architecture and design teams, Product & Test Engineering teams, Customer Quality teams, software & platform teams to come up with the best solution that balances quality and cost. You will experience working with and learning from AMD’s talented engineering teams around the world

THE PERSON:

We are looking for someone with strong technical, analytical, leadership and problem-solving skills, as well as demonstrating the characteristics of an independent and resourceful individual.

The applicant must have a proficient understanding of x86 CPU and GPU architecture and functionality, as well as a broad understanding of various industry standard bus protocols, such as DDR, PCIe, and USB.

KEY RESPONSIBILITIES:

• Accountable to drive and develop SLT solutions to meet business milestones, cost and quality in system level scope.
• Solves complex, novel, and non-recurring problems; initiate significant changes to existing processes/methods and leads development and implementation
• Conduct engineering evaluations and analysis to drive closure of production issues
• Develop and architect SLT logging or data collection flow in manufacturing
• Influences technical decisions that have a significant impact on final product
• Involves collaboration on or assuming the consultative or leadership responsibilities for a specific project or for product development initiatives
• May provide technical supervision or mentoring junior engineers
• Upscale overall team capabilities on low level system debug for AMD data center product families

PREFERRED EXPERIENCE:

• Knowledge or working experience on GPU architecture, X86 architecture, SoC design and power management features
• Experience with SOC (System-On-Chip), Firmware and Software interaction
• Software programming and scripting proficiency (Java, Shell script, Perl, Ruby, Python)
• Proficiency in Windows and Linux operating systems
• Experience with HBM (High Bandwidth Memory) and/or HSIO (High Speed Input Output) and/or Co-Packaged Optics is a strong plus
• Experience with HVM (High Volume Manufacturing) is a strong plus
• Strong and effective presentation, written and verbal communication skills, and the ability to work with geographically distributed product engineering teams
• Excellent interpersonal, organizational, and analytical skills

ACADEMIC CREDENTIALS:

• Bachelor/Master in Electrical Engineering, Computer Engineering, or comparable disciplines

about the company
Our client in the health and wellness industry, is currently optimizing their extensive product range to remain the top choice for modern, health-conscious consumers. This role is serving as the critical link between market strategy and their regional R&D facilities.

about the job

This is an end-to-end product management role focused on the successful delivery and expansion of the brand's portfolio. You are not just coming up with ideas; you are responsible for the total health of the product, ensuring that every item, from its formula and raw materials to its packaging and labeling, is fit for purpose across multiple Asian markets.

Key responsibilities include:

• End-to-End NPD Coordination: Managing the roadmap for new launches, ensuring timelines are met between R&D, manufacturing, and sales.
• Product Optimization: Evaluating existing products to suggest practical improvements in formulas or raw material sourcing to enhance quality or compliance.
• Packaging & Labelling: Leading decisions on packaging formats and ensuring all labels meet specific country regulations.
• Regional Market Mapping: Analyzing which products from the global portfolio are suitable for launch in specific regional markets based on local consumer habits and regulatory ease.

about the manager/team
You will report to the Regional Head. The team is lean and values "Project Owners" - people who don't just wait for instructions but take charge of a product's journey from the factory to the pharmacy shelf. It is a highly cross-functional environment where you will be the "go-to" person for both technical and commercial teams.

skills and experience required

• Degree in Food Science, Nutrition, Life Sciences, or a related discipline.
• Minimum 4-6 years of experience in NPD, Product Management, or Category Management within FMCG, Food, or Consumer Health.
• You should understand the basics of raw materials, packaging stability, and labeling requirements.
• A strong track record in managing the "nitty-gritty" of a product launch (Project Management).
• Required to coordinate with regional manufacturing sites and stakeholders.
• Able to look at a product and see both the technical constraints and the commercial opportunities.

To apply online please use the 'apply' function, alternatively you may contact Florence Pang via LinkedIn https://www.linkedin.com/in/florence-pang-14742515a/ or email at florence.pang@randstad.com.sg

(EA: 94C3609/ R25139901)

Product Business Development Executive | Automative Industry

• Work Location: Clementi, Singapore
• Working Hours: Mon – Fri 8am – 6pm
• Monthly Salary: Basic up to $4300
• Employment Type: Full time, Permanent Contract
• Provision company transport at Clementi MRT

Company Overview

The company is a well‑established Singapore‑based organization with a strong presence in both local and international markets. Recognized for the company’s commitment to quality, reliability, and innovation, the company provide effective solutions and services to a diverse range of clients across industries.

Responsibility

• Share and update product, pricing, and development information across the Group to ensure consistency and alignment.
• Liaise with principals on new product initiatives and identify potential business opportunities.
• Monitor market trends and gather performance feedback on proprietary brand products to support decision‑making.
• Compile and analyze Group volume data, preparing business plans to drive strategic growth.

Requirements

• Degree in Business, Marketing, International Business, or Supply Chain Management
• Minimum 3 years’ experience in Product Planning, Brand Management, or Business Development
• Proficient in Microsoft Office (Excel and Powerpoint)
• Experience with data analysis tools or ERP systems (SAP, Oracle) is an added advantage
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.

Recruit Lync Pte Ltd | EA License Number: 22C1000

Chen Hoe Nam | EA Personnel License: R25158678

• To analyse user requirements and design, develop, implement and maintain computer applications to support and assist users to meet their business objectives more effectively and efficiently.
• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on source systems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info so that Server database so that potential problems (e.g. disproportionate consumption of disk space by a particular table, depletion of data tablespace, excessive consumption of temp tablespace) are detected and resolved early to avoid unscheduled database downtime.
• Perform ad-hoc retrieval of order/production/sales data to support incident investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info Systems/Computer Science or its equivalent
• Prefer 2-3 years relevant experience in Manufacturing Industry.
• Entry level are welcome to appy as training will be provided.
• Entry level candidates with strong programming knowledge are welcome to apply as training will be provided.
• Required travelling to Batam Factory and staying for project is necessary (Min. 2weeks to max 2months stay per visit depending on project requirement)

Knowledge:

SQL; Oracle PL/SQL; MS SQL Server Transact-SQL

Object-oriented analysis and design

ASP.NET 4.5.1; C/C++/C#; XML

JavaScript; JQuery; CSS; HTML

Excel VBA; VBScript; PowerShell

PHP, VS.Net, MS Office

Interested Applicants, kindly email your detailed resume to hr@tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Key Responsibilities

• Define and execute the regional platform and product strategy across CPaaS, Telco APIs, AI-enabled solutions, and new digital products to drive long-term growth and sustainability.
• Engage closely with company's Operators at senior and working levels to identify business needs, co-create initiatives, and support successful market launches.
• Lead product planning, roadmap development, and go-to-market strategies in alignment with company’s commercial priorities and regional market dynamics.
• Identify, evaluate, and manage strategic partners, vendors, and ecosystem players to introduce differentiated solutions and accelerate time-to-market.
• Drive adoption of regional initiatives by leading workshops, strategy sessions, and business planning forums across the Bridge alliance.
• Develop compelling value propositions to strengthen engagement with existing company's and attract new members and strategic alliance partners.
• Actively pursue regional enterprise and channel-led opportunities, working jointly with companies to win and deliver cross-market deals.
• Establish and lead a high-performing platform business team (4–5 members), providing clear direction, capability development, and performance management.

Key Qualifications

• Degree in Engineering, Marketing and / or International Business
• Broad knowledge of telecommunications products and services development and marketing
• Knowledge in products such as CPaaS, Telco API, AI, etc.
• Knowledge in pricing and marketing from a services industry.
• 15 years of working experience from the telecommunications industry
• 5 years of product management experience
• 5 years in leadership and people management role
• At least 3-5 years working experience in Asia.

Interested applicants please send your resume to venessagoh@recruitexpress.com.sg

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted.