Total 2,043 Senior Executive mechanical engineer job vacancies

Responsibilities

• Responsible for tester installation, re-configuration, upgrade, repair and debug
• Identify and execute continuous improvement to improve test performance and OEE
• Generate technical gap analysis of new hardware, software and license requirement
• Provide technical training to production personnel
• Coordinate and lead machine suppliers on project costing and time management
• Support audit / visit and render assistance in solving outstanding/quality issues

Requirements

• Degree / Diploma in any engineering field or equivalent
• Knowledge of equipment, testers, handlers
• Prior experience in equipment troubleshoot, maintenance and repair
• Semiconductor Programming & Application skills
• Good planning & organizing ability and a team player
• Familiar with Quality Management – Problem Solving, SPC, DOE, FMEA
• Good communication & presentation skills

1. Perform equipment safety buy-off and drive the machinery safety program:
   1. Ensure all Manufacturing, Assembly, and Test Equipment (MAE) is safe (according to site requirements) before release to production.
   2. Ensure all MAE is equipped with a hazard assessment and an environmental impact assessment before release to production.
2. Participate in the review of machinery design and serve as an advisor on safe machinery concepts.
3. Sustain and improve the ISO 14001 and ISO 45001 management systems.
   a. Serve as an auditor for the EHS management system.
   b. Sustain and update ISO procedures as and when necessary
4. Plan and conduct EHS related training for employees, visitors, and contractors.
5. Conduct EHS inspection/ assessment and provide technical support to stakeholders.
6. Sustain and ensure compliance.
   a. Assist the Department Head in ensuring site compliance with governmental and local regulations pertaining to EHS and handle all contact with appropriate agencies. Ensure required regulatory reports are submitted accurately and within established deadlines.
7. Perform accident and incident investigation, follow up on corrective action closure and report to DOSH as and when necessary.
8. Analyze data, conduct trend analysis, apply problem-solving methodology and formulate recommendations to drive continual improvement of EHS management system performance.
9. Manage the emergency response preparedness program.
   a. Sustain, update, and improve procedures.
   b. Maintain and update the plant evacuation map, signage, and assembly area as and when necessary
10. Interact with all levels of people to build trust and raise the EHS awareness level among associates

Project Overview

This project aims to develop a real-time blood analysis and diagnostic platform using an integrated microfluidic chip. This platform uses precision microfluidic technology to process and profile the biological activity of white blood cells which is related to a host of inflammatory conditions ranging from diabetes, sepsis to leukemia. The platform developed will enable point-of-care diagnosis of diseases and this project will accelerate the platform from bench to bedside through the development, deployment and testing of clinical samples.

This Engineering position offers a rare opportunity to bridge the gap between laboratory discovery of new technologies and real-world implementation of clinical deployment and testing. 

Responsibilities

The engineer is responsible for the design, prototype, manufacturing and testing of the medical device. This involves the use of with computer-aided design prototyping, setting specifications and assembly of mechnical/electrical components, testing and deployment of device for field testing.

Responsibilties include:

- To work closely with a team of clinical, mechanical/software engineers and data scientist for the medical device design and prototyping. Gather feedbacks on prototype designs by end-users.

- To Validate designs by analysing data gathered from component or system level testing. Use benchmarking techniques to characterise component and device performance.

- To ensure proper documentation of design history files and standardization of data storage for reports, presentations, technical and administrative documents.

- To source for vendors and components to ensure manufacturability and cost of medical device.

- To support the team for maintenance of equipment, inventory and purchases.

Requirements

- Bachelors/Masters in Mechanical, Electrical, Biomedical Engineering with at least 1 years of experience in hardware prototyping and/or microfluidic operations.

- Rapid prototyping experience in areas such as 3D printing, laser cutting, CNC, injection molding, microcontroller/microprocessor programming and relevant skills in embedded system.

- Prefered experience in commercial manufacturing, R&D project management and hardware testing/certification.

- Excellent debugging skills and strong ability to root cause, isolate and solve software/hardware system issues.

- Fluent in C++, Python (3.X) and relavent coding languages for software-hardware integration.

- A desire to deliver a quality and innovative medical diagnostic product that improves many people’s lives.

- Good communication and managing skills are important to work with colleagues efficiently in addition to creativity to solve problems and find improvements on products and processes already in place.

- Required experience and knowlegde to read or write scientific publications, patent search, schematics and data sheets for hardware components.

- Able and commited to work in Singapore. Willing to commute and meet regularly with vendors and collaborators at NUS, NUH, and partnering hospitals.

- Strong documentation and writing skills

- A desire to deliver a quality and innovative medical diagnostic product that improves many people’s lives.

Relevant Skills

2D/3D Computer Aided Designs, C++, Python, Operating CNC/3D printers, basic use of machine tools, electronics circuit design, Github 

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Software Senior Engineer, Software Engineering 

The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.

Join us to do the best work of your career and make a profound social impact as a Senior Software Engineer on our Software Engineering Team in Singapore.

What you’ll achieve
As a Senior Software Engineer, you will be responsible for the technical support of factory test process and software that apply to Client and Server products being built. 

You will: 

• Collect issue category data and drive back to issue owners not only to solve the issue, but also improve process gaps and test coverage.  
• Contribute to the design and architecture of new or re-engineered software/storage environments to accomplish the goals of PCBA boards manufacturing testing.
• Prepare written software/storage specifications for sophisticated products from architectural diagrams and documents
• Build and review design, functional, technical and/or user documentation, as needed
• Develop, review and implement test strategies for software products and systems

Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:

Essential Requirements

• Validated knowledge of programming languages; operating systems; firmware; BIOS; device drivers; databases; system, network, operating system, and application administration; embedded software/firmware; tools and utilities
• Ability to code/debug more sophisticated programs using either written or verbal design specifications
• Experience with ICT test program development and debug
• 5–8 years of related experience with a Bachelor's Degree in IT
• Knowledge in programming language (python)
• Strong communication in English

Desirable Requirements

• Capacity to achieve proficiency of new tools, languages and operating systems with training and on-the-job experience

Benefit

• Staggered working hours available
• Performance Bonus & AWS
• Medical coverage with panel clinics
• Company incentive trip & team bonding activities

Job Responsibilities:

• Planning and scheduling of projects
• To manage M&E construction projects and to monitor the projects are carried out with respect to the target schedule
• To handle design for Air Conditioning & Mechanical Ventilation System and to ensure clients' requirements are met
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub-contractors
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects
• To forecast and anticipate possible issue for projects and to eliminate potential risks
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow
• Planning of manpower and work arrangement with site person in charge
• To liaise with suppliers on procurement and delivery of materials and equipment
• Assist in settlement of project final account including variation orders

Requirements:

• Candidate must possess Engineer specialized in Engineering - Mechanical or equivalent.
• At least 2 Year of working experience in the related field is required for this position.
• Energetic, self-motivated, good problem-solving skills.
• Willing to learn, positive attitude.
• Proficiency in AutoCAD drawing is preferred.

The Managed Services Cross Technology Engineer (L3/L4) – Network / Security is an advanced, architect-level role across multiple technology domains (Cloud, Security, Networking, Applications, Collaboration). The primary objective is to design, implement, and maintain an enterprise network defensive architecture to protect data and infrastructure from sophisticated threats. This role acts as the highest-tier escalation point (4th-line support) to resolve complex operational incidents, ensure contracted client outcomes, and meet Service Level Agreements (SLAs).

Key Responsibilities

1. Strategy & Architecture

• Security Roadmap: Define, architect, and champion the overall network security posture across on-premise, cloud, and hybrid environments (including Zero Trust and SASE models).

• Infrastructure Design: Deploy and manage core components like Next-Gen Firewalls (NGFW), IDS/IPS, WAF, Load Balancers, VPNs, and Network Access Control (NAC) systems.

• Cloud & Segmentation: Design secure cloud networking patterns (e.g., AWS VPCs, Azure VNets) and enforce micro-segmentation.

• Policy & Governance: Establish and enforce comprehensive network security policies, standards, and baselines.

2. Incident Management & Operations

• L4 Escalation Support: Act as the final technical tier for complex incidents that lower-level teams (L1–L3) cannot resolve, performing deep root-cause analysis.

• Ticket & SLA Ownership: Systematically troubleshoot, log, track, and update tickets with resolution details within agreed timelines.

• Proactive Monitoring: Diagnose and investigate potential system issues and errors before or when they occur to minimize client impact.

• Emergency & Change Management: Serve as an emergency contact for critical, business-impacting outages and oversee strict change management protocols.

3. Optimization, Projects & Mentorship

• Automation: Collaborate with automation teams to script and automate routine operational tasks for effort optimization.

• Knowledge Sharing & Mentorship: Create high-quality technical documentation (HLD/LLD) and coach/push knowledge down to junior engineering teams.

• Disaster Recovery: Develop, implement, and test network security components within Disaster Recovery (DR) and Business Continuity plans.

• Project Delivery: Manage, implement, and execute technical projects according to client timelines.

• Quality Audits: Perform process and service experience quality audits.

Key Competencies & Attributes

• Strong client-centric focus with a passion for exceeding expectations under pressurized environments.

• Excellent change management, active listening, and cross-cultural communication skills.

• Ability to plan effectively amid changing circumstances and work extended hours when necessary.

Technical Skills & Certifications

• Education: Bachelor’s degree in IT/Computing or equivalent work experience.

• Preferred Certifications: CCIE, CCNP Security, CISSP, PCNSE, or vendor-specific firewalls (Fortinet, Check Point, Cisco).

• Core Technology Stack Required:

  • Firewalls/Security: Cisco ISE, Fortinet (FortiGate, FortiManager), Check Point, CyberArk.
    (Firewalls: Expert-level management of Cisco OR FortiGate)

  • Application Delivery/Vulnerability: F5 (LTM, WAF), RSA, Tenable, Trend Micro.

  • Monitoring & Tooling: Solarwinds, Splunk Enterprise, OPSWAT.

  • Network Diagnostics & Automation: Advanced packet analysis (Wireshark/tcpdump) and basic automation scripting (Python/Ansible).

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

This position is for a Senior Electrical Design Engineer in Singapore. 

Mission

As part of a project team:

• Act as the leader of the technical content of the project, and be the single point of contact regarding all project technical topics;
• Make sure customer technical requirements are fulfilled (in terms of performance, quality, costs, and time), in compliance with the contract, and based on the Architecture & Technical specifications defined during the tendering phase
• Lead a technical team composed of "customer project technical designers and engineers" and ensure technical coordination of all projects stakeholders
• Lead all technical aspects of customer integrated projects, such as design, implementation, testing, FAT in compliance with Singapore statutory requirement and industry standards.
• Manage technical risks and interfaces between the project team stakeholders and the customer; and get final customer approval of the overall technical solution designed and delivered in ensuring regulatory compliance (IEC, IEEE & NEMA)

Scope and Environment

• Part of a customer project execution/application center;
• Project technical teams are located spread among one or several sites/countries, requiring international collaboration with other functional teams/stakeholders.

What will you do?

Technical team coordination & management:

• Lead & approve the basic and detailed design of all technical aspects of an integrated solution, in line with customer and contract requirements (technical performance);
• Make sure the project technical team delivers according to the project planning;
• Monitor technical costs, make sure budget for the technical part is under control;
• Coordinate all technical implementation activities done at factories or supplier premises and testing facilities until project closure.

Technical coordination of project stakeholders:

• Work in close collaboration with PM & other technical designers and engineers who take care of part of the technical scope;
• Identifies whether specific expertise support is needed and coordinate the expertise actions if any;
• Lead and coordinate all technical aspects of the sub-contracted parts of the project, in strong coordination with the procurement team;
• Act as a single point of contact for all project stakeholders regarding the technical content of the project; and ensure technical coordination among the project team.

Design & Implementation: according to her/his field of knowledge,

• Perform, review some design and specification activities, by leveraging Schneider Electric portfolio of products & systems in an optimized manner, in order to maximize profitability and limit technical risks; May perform some implementation/test activities (testing, FAT, etc).

Risk & Opportunity Management, Change management, Alert:

• Identify any potential changes versus contract or already agreed design;
• Work closely with PM to specify the changes and their implications for Schneider Electric (including cost impact evaluation), until getting a variation order.
• Alert PM of any substantial issue that could affect the project performance or customer satisfaction.

Customer interactions:

• Lead technical discussions and clarifications with customers.
• Act as the key and trusty contact person for all technical topics related to the project.

Quality process, Methods, Tools:

• Support PM to ensure full compliance with Schneider-Electric processes (especially CPP & TDP), and with quality instructions, safety requirements, and governance principles.
• Lead the technical team to correct any technical deviations or quality issues occurring during project execution.

Community of practices & Coaching:

• Take part in Technical Leaders' Community of Practice within her/his Execution Center, or globally within Technical Excellence Community network.
• Identify, get, formalize, share and promote lessons learned and best practices.
• Act as a role model and/or coach junior technical engineers and designers.
• Be connected with LoBs and stay tuned on the last technical evolutions of equipment & systems (in her/his field of engineering, acting then as a referent in the Community).

What qualifications will make you successful for this role?

Education

• Minimum Bachelor’s Degree in Electrical Engineering.

Experience

• 5 years in leading technical scope of projects in Power System or Electrical Distribution System application
• 5 years working in one or several engineering application domains: Power, Automation & Software, Telecom & IT, Cyber Security, Mechanical & HVAC, Structural.
• Technical experience in a specific market segment (e.g. Power GRID & Utility, OGP, MMM, F&B, etc..) or in a customer application/process is a plus.
• Ability to read and understand applicable standards
• Ability to learn from others, share her/his knowledge, coach others and collaborate efficiently.

Skills

• Strong knowledge of electrical power systems and building services design.
• Proficient in engineering software and tools (e.g. AutoCAD Electrical, Revit, ETAP).
• Solid understanding of electrical codes and standards.
• Excellent technical problem‑solving and analytical skills.
• Effective communication skills for coordination with authorities and stakeholders.
• Ability to lead technically and work independently under minimal supervision.

Application Engineer / Application Manager

Semiconductor Industry | Ion Implantation Equipment | US MNC

About the Company

Our client is a leading US multinational company specializing in advanced semiconductor manufacturing equipment and process solutions. Due to business expansion, they are looking for an experienced Application Engineer / Application Manager to support customers across the semiconductor industry.

Key Responsibilities

• Provide technical expertise and application support for ion implantation equipment and related semiconductor processes.

• Conduct product demonstrations, technical presentations, process evaluations, and customer training.

• Work closely with Sales teams to understand customer requirements and recommend suitable solutions.

• Support equipment installation, qualification, process optimization, and performance validation.

• Troubleshoot equipment and process-related issues, providing both reactive and proactive customer support.

• Assist customers in improving process performance, yield, and productivity.

• Collaborate with internal engineering, service, and product teams to resolve technical challenges.

• Prepare technical reports, application documentation, and customer presentations.

• Perform data analysis and process evaluations to support customer applications and continuous improvement initiatives.

Requirements

• Degree in Electrical Engineering, Electronics Engineering, Materials Science, Physics, Semiconductor Engineering, or a related discipline.

• Experience in semiconductor manufacturing, equipment applications, process engineering, or field support.

• Knowledge of ion implantation, semiconductor fabrication, wafer processing, or related technologies is highly preferred.

• Strong troubleshooting, analytical, and problem-solving skills.

• Good communication and presentation skills with the ability to interact with customers and internal stakeholders.

• Willingness to travel as required to support customer sites.

For interested applicants, kindly send your resume in Word/PDF format to include the following in your resume including:

1. Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

NGUYEN THI DOAN | R23116355

RRecruiter Pte. Ltd. | 18C9514

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Role Overview

We are seeking a highly experienced Senior Integration Engineer to lead a technical team in delivering complex integration projects.This role combines hands‑on expertise in Linux and networking with leadership responsibilities, ensuring seamless inter operability across mission‑critical systems.

Key Responsibilities

• Lead and mentor a team of integration engineers,driving technical excellence and delivery accountability.
• Architect, configure, and maintain secure,scalable network infrastructures across diverse environments.
• Administer and optimize Linux servers, ensuring performance, resilience, and hardened security.
• Integrate applications, subsystems, andplatforms into cohesive, reliable solutions.
• Troubleshoot advanced connectivity, latency, and interoperability issues with precision.
• Implement automation frameworks and DevOpspractices (CI/CD, containerization, monitoring).
• Collaborate with cross‑functional teams to align integration outcomes with business objectives.
• Document integration processes, standards, and best practices for long‑term scalability

Qualifications

• Degree in Engineering, Computer Science, IT, or equivalent experience.
• 7+ years in systems integration or infrastructure engineering, delivering complex real‑timesolutions.
• Strong expertise in Linux/Unix administrationand Windows/virtualization platforms (VMware, Hyper‑V).
• Solid knowledge of networking protocols (TCP/IP,UDP, DNS, SNMP) and cybersecurity fundamentals (LDAP, PKI, AD).
• Hands‑on experience withscripting/automation (Python, Shell, Ansible) and DevOps pipelines (Jenkins,CI/CD, Docker/Kubernetes).
• Skilled in troubleshooting with tools like Wireshark and infrastructure monitoring suites.
• Proven leadership in guiding technical teams,with excellent communication and problem‑solving skills.

Interested applicants please call me @ +65 91130054 or emailmarco.chong@ev-search.com

EV Search: 23S1748,

Marco Chong Wei Choon: R1215814

Job responsibilities:

• Reports to Head of Engineering Management basis organization and to Project Engineering Manager when assigned to a project role.

• Completing all assigned tasks as delegated by the Engineering Manager

• Coordination of internal engineering activities and the interdisciplinary interfaces in close coordination with the discipline team leaders

• Ensure technical requirements defined in the contract are incorporated in the engineering deliverables.

• Managing and facilitating communication across the engineering functions to ensure that the project objectives and needs are met.

• Assist the Engineering Manager in compilation of weekly reports and highlight outstanding or hold issues, including areas of concern and review of action items.

• Organisation of multidiscipline system/area design reviews

• Participate in HAZOP's and other external reviews

• Define and request required resources and establish design teams

• Interface with other organisational units, including systems administrations

• Ensure that vendor information required to progress the work are identified and communicated

• Implement project strategies and philosophies

• Monitor the execution of the quality assurance program for conformance to project requirements.

• Responsible for the administration and follow-up of the deviation/ concession system and Technical Clarifications towards Client

• Coordinating with Third Party Suppliers/Service Contractors

• Responsible for ensuring identification, decision making and implementation of all changes to the design, including necessary changes arising from design development and site queries

• Coordinate with engineering team to identify risks and opportunities, evaluate the consequences and register them in the Risk Database. Follow up on and ensure closure of mitigation actions.

• Arrange lessons learnt workshops for the FEED and Execute phases with engineering. Follow up with discipline leads that relevant lessons learnt are implemented in the design

• Maintain a positive and safe working environment at work location

Work experience requirements:

• Must have a minimum of 8 to 12 years of experience having worked in an multi-disciplinary engineering setup for upstream oil & gas projects (Fixed and Floating installations) having served in the capacity of a Senior Project Engineer

• Must have an experience with Change/ Interface/ Risk Management

• Must have had prior work experience with medium/ large sized brownfield and green field projects in the Oil and Gas sector with similar roles and accountabilities and possess an excellent understanding of project phases, milestones and deliverables.

Qualifications:

• Bachelor’s degree in an equivalent engineering specialisation.

Other skills:

• good understanding and knowledge of oil and gas industry

• Computer literacy in MS Office

• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams and client.

• Effective interpersonal skills and ability to work well with people at all levels.

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.

• Strong industry knowledge in an MNC work environment would be an advantage

We regret that only shortlisted candidates will be notified.

Job Descriptions:

• Lead NPI capacity planning and ramp-up readiness.
• Design and optimize FATP line layouts and production flow.
• Govern time studies and validate standard times across FATP lines.
• Drive line balancing optimization and manpower efficiency improvement.
• Perform OEE analysis and eliminate bottlenecks.
• Lead Lean initiatives, including VSM, SMED, Kaizen events.
• Collaborate with the automation team to optimize production line headcount and drive cost reduction initiatives.
• Quantify cost-saving opportunities and track financial impact.
• Mentor junior IE engineers.
• Present productivity analysis and improvement proposals to management

Job Requirements:

• Diploma or Bachelor Degree in Industrial Engineering or a related field; Lean / Six Sigma certification is an advantage.
• Minimum 5 years of experience in FATP or high-volume manufacturing environments.
• Strong expertise in time study, MTM, line balancing, capacity modeling, manpower optimization, OEE analysis, and throughput improvement.
• Advanced knowledge of FATP processes, with a solid understanding of automation impact on labor modeling.
• Proficient in advanced Excel, Power BI, and other data analysis tools, with the ability to prepare financial and productivity reports.
• Strong analytical, structured problem-solving, and project management skills.
• Results-driven mindset with leadership, mentoring, and cross-functional influencing capabilities.

Responsibilities:

• Data Infrastructure: Build, implement, and maintain scalable data pipelines and storage architectures.
• Data Quality: Maintain strong data integrity by ensuring reliability, consistency, and accuracy across all data processes.
• Performance Optimization: Enhance system efficiency by tuning data processing workflows and improving large-scale performance.
• Process Improvement & Mentoring: Strengthen data engineering practices while providing guidance and support to junior engineers.
• Cross-Functional Collaboration: Partner with business analysts, data scientists, and backend teams to deliver timely and actionable data solutions.

Qualifications:

• 5+ years’ experience in data engineering or backend roles, with strong programming skills in Python or Java/Scala.
• Hands-on experience with big data tools: Spark, Flink, Kafka, Airflow, and cloud platforms (AWS, GCP, Azure); proficient in SQL.
• Skilled in designing and maintaining data models, warehouses, and ETL/ELT pipelines for scalable, reliable systems.
• Knowledgeable in data quality, governance, security, and compliance best practices.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

Our esteemed client in the Power Systems industry is seeking a Senior / Sales Engineer to join their dynamic team:

• Employment Type: Permanent
• Position: Senior / Sales Engineer
• Location: East (Nearest MRT: Ubi)
• Working Hours: Monday to Friday, 8.30am to 6pm
• Salary Package: Basic + Transport Allowance + AWS + VB

Job Responsibilities:

• Drive sales and business development within assigned markets.
• Build and maintain strong relationships with new and existing clients.
• Support tender processes, including technical coordination and customer clarification.
• Review and submit tender documents accurately and on time.
• Attend project/ site meetings and support after-sales service and maintenance contracts.
• Perform other duties as assigned by management.

Job Requirements:

• Minimum Nitec in Electrical or Electronics Engineering, or its related field.
• At least 2 years of experience in technical or industrial sales, preferably with exposure to petrochemical, power generation, or marine sectors.
• Possess a valid Class 3 Driving License with own transport.

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793