Total 5,555 procurement engineer job vacancies in Engineering category

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Diffusion (Wet) Department diverse team of talent.

What you will be working on:

• To sustain and improve all equipment performance indices to meet operations goals

• Perform shift duties based on rotation systems to support production
• Optimize equipment uptime/ reliability thru scheduled & recovery maintenance. 
• Control equipment performance indices to meet BBS goals
• Comply to ISO standards and Quality systems of the company
• Forecast/ establish stock levels of spares and consumables to meet manufacturing capacity within allocated budget
• Establish and maintain preventive maintenance OI to standardize equipment practice
• Train/ mentor AEs to through OJT and continually upgrade their technical skills to cope with technological changes
• Recommend improvement to enhance capabilities, reliabilities or cost saving
• Participate in CIT team/ task force to optimize equipment performance and COO
• Start-up new equipment to support production ramp, from facilities hook-up, vendor start-up, to acceptance of equipment.
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Ensure good housekeeping and safety practices in the work area.

More about you:

• Degree in Electrical/Electronics/Mechanical Engineering Diploma in Mechatronics/ Electronics/ Mechanical Engineering with at least 4 years semiconductor equipment maintenance experience.
• 1-3 years relevant experience innthe semiconductor manufacturing environment. Fresh Degree holders are welcome to apply.
• High Vacuum maintenance experience
• Basic semiconductor wafer fabrication equipment/ process knowledge
• Able to interpret electrical/ pneumatic schematic drawings
• Team Player
• Possess a strong sense of responsibility

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

An exciting position in the explosive growth area of Data Center Enterprise Storage responsible for providing low power, high performance analog and mixed signal products. In this role you will be responsible for developing the most advanced semiconductor devices to support high capacity storage needs across all the top tier service providers. You will work with highly talented teams to meet the company business goals while growing your skills.

Detailed Job Description

The candidate will be involved in IC product validation which could include one or more of the following areas:

• Full chip Mixed Signal validation

• Product validation planning and execution

• Design and debug of test and measurement setup, which includes hardware, software and systems

• Validation review with detailed analysis of validation results leading to improvements in product design as well as test methodology

Requirements

• Bachelor of Science degree in Electrical Engineering (or related field) +5 years of analog/mixed signal IC design, verification, and validation experience or

• Master of Science degree in Electrical Engineering (or related field) +3 years of analog/mixed signal IC design, verification, and validation experience or

• Proficiency in English

Job Overview

This role focuses on the engineering design and technical coordination of mechanical systems used in marine vessels. The engineer will support the development of ship systems including machinery, piping networks, and equipment installation.

Key Responsibilities

·      Review machinery specifications and ensure compliance with technical requirements

·      Interpret classification rules and engineering standards for vessel construction

·      Support design development for ship machinery spaces and equipment layouts

·      Work with designers and vendors on piping system schematics and equipment installation plans

·      Coordinate interfaces between major ship systems including engines, propulsion and auxiliary systems

·      Participate in 3D modelling activities for vessel design and production planning

·      Generate material take-off lists and installation details for piping systems

Requirements

·      Degree or diploma in Marine Engineering or Mechanical Engineering

·      Minimum 5 years of experience in shipyard or marine engineering environments

·      Familiar with ship machinery systems and piping networks

·      Experience with engineering drawings and technical documentation

·      Knowledge of pumps, compressors, valves, and piping components

·      Proficiency in AutoCAD and engineering software tools

·      Strong analytical and communication skills

Please send your detailed resume in MS Word format to resume@goldtecHRs.com with

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

We are seeking an experienced Senior .NET Fullstack Developer to join our team on an initial 12-month contract, with the potential for extension based on performance. This role offers the opportunity to contribute to impactful projects within a dynamic and collaborative environment.

We are looking for a candidate with strong expertise in C#/.NET Core, ASP.NET, microservices architecture, and cloud platforms (preferably Azure). The ideal candidate will also have experience with modern front-end frameworks such as Angular or React, and a solid understanding of Agile delivery methodologies.

Overview:

You will lead the development of scalable, high-performance applications using the latest in Microsoft and cloud-native technologies. This role requires hands-on experience across the full software development lifecycle, from front-end development to back-end services, within modern Agile environments. You will play a key role in designing and implementing solutions that are secure, maintainable, and aligned with business objectives.

Key Responsibilities:

• Design, develop, and maintain end-to-end software solutions using C#/.NET Core and ASP.NET (MVC/Web API).
• Develop cloud-native applications using Azure or AWS, with experience in containerization (Docker) and orchestration (Kubernetes).
• Implement intuitive and responsive user interfaces using modern JavaScript frameworks (Angular or React).
• Work within Agile/Scrum teams, participating in sprint planning, stand-ups, and reviews.
• Ensure code quality through Test-Driven Development (TDD), unit testing, and implementation of CI/CD pipelines.
• Collaborate closely with designers, product owners, and stakeholders to build user-centric, reliable systems.

Key Skills & Competencies:

• Strong expertise in .NET Core, ASP.NET MVC/Web API, C#, and microservices architecture.
• Proven experience with cloud platforms (Azure or AWS) and containerization technologies.
• Front-end development experience with Angular or React (or similar frameworks).
• Familiarity with Agile methodologies and DevOps practices.
• Passion for writing clean, maintainable, and testable code.
• Excellent communication and collaboration skills, with experience working in cross-functional teams.

Ideal Candidate Will Excel In:

• Developing large-scale enterprise solutions.
• Delivering customer-facing digital platforms and complex distributed systems.
• Contributing to collaborative delivery environments across the APAC region.

Argyll Scott Consulting Pte Ltd

Job Requirements

• Design of control systems, instrumentation, cabling and cable support systems for Process equipment,
• Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary
• Design of Information Technology cabling system with the support of a senior engineer if necessary
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design
• Technical Evaluation of vendor submissions including approval of shop drawings
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic
• Prepare Extra Low Voltage System tender packages including specification and drawings.
• Responsible for ensuring to remain familiar with latest country codes, current practices and engineering trends within the industry
• Tendering and estimating of Extra Low Voltage system works for projects prior to award
• Prepare Technical Bid evaluations and recommendations during project execution
• Compilation and Review of Operation and Maintenance Dossier for Projects
• Liaise with Clients, Consultants, equipment vendors and suppliers where required to ensure compatibility of design interfaces during construction activity
• Adherence to the Corporate and Project Quality Management System
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents
• Ad-hoc duties as determined by management
• Use / Maintain Exyte Knowledge Center
• Continuously update profile on career compass

Job Requirements

• Degree in Instrumentation and Controls Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications
• Experience in design, installation, programming, commissioning of Process and Building control systems
• Experience in design, selection, installation, commissioning of Instrumentation for Process and Building control systems
• Experience in Extra Low Voltage Systems such as Fire Alarm, Security systems, IT data network
• Experience in Advanced Technology Facilities, Life Science & Chemicals, Energy & Environment Technologies, High Tech Infrastructure, Process Automation, Products and Services
• Experience in construction management

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Qualifications:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

About Innowave Tech

Innowave Tech is a leading AI solution provider in the semiconductor industry, specializing in developing cutting-edge technologies for innovation and efficiency. Our focus is on leveraging computer vision and large-scale data analytics to meet the complex needs of our clients.

Position Overview

We are looking for a Lead IoT Engineer to spearhead the end-to-end development of our IoT products. This role covers hardware, firmware, and software integration, with a strong focus on product lifecycle management. You will lead a small team of engineers, work closely with clients, and collaborate across product, operations, and manufacturing teams to deliver production-ready solutions.

Key Responsibilities

1. Lead the end-to-end development of IoT solutions, covering hardware, firmware, and software.
2. Manage the full product lifecycle from concept and prototyping to pilot and production.
3. Provide technical leadership for a small team engineers, including mentoring, task allocation, and design/code reviews.
4. Engage directly with clients for requirement gathering, solution presentations, and troubleshooting.
5. Oversee project management activities: timelines, documentation, andrisktracking.
6. Collaborate with product managers, operations, suppliers, and manufacturing teams.

Technical Skills

• Hardware: PCB design, electronics fundamentals, sensors, microcontrollers (STM32, ESP32), industrial protocols (Modbus, CAN, RS485).
• Firmware: C/C++ for MCUs, RTOS, Linux device drivers, low-level debugging.
• Software: Python, Node.js (or similar) for middleware; cloud integration (AWS/Azure); containerization (Docker, Kubernetes).
• Networking: TCP/IP, MQTT, HTTP/REST APIs, and security protocols.
• Tools: Altium/KiCad, Git, Jira, CI/CD pipelines.

Qualification

• Bachelor’s degree in Electrical/Electronic Engineering (EE/EEE), or equivalent experience.
• 3+ years of experience in IoT, embedded systems, or related product development.
• Prior team leadership and product development experience preferred.
• Background in semiconductors, industrial IoT, or automation industries preferred.

THE ROLE:

DFT engineer will lead strong engineering team on Scan, MBIST, iJTAG test development of latest AMD products. The IPs range from complex processors, AI computation blocks, to state-of-the-art controller IPs which provide automotive, data center, machine learning and high-speed communication solutions. You will work closely with designers to make sure DFT structures are correctly implemented, with test engineers to make sure ATE test programs can be generated from the DFT (ATPG, MBIST) tools, with product engineers to make sure scan/MBIST production test can run seamlessly and stable, and with yield engineers to debug and root-cause failures/defects. You will get the opportunity to expand technical knowledge beyond DFT into embedded processor firmware, complex chip simulation, RTL implementation for ASIC & FPGA and deep silicon debug works all the way to high-volume production requirement. This is the role to oversee complete silicon cycle from design to production phases.

THE PERSON:

We are looking for candidates that can communicate complex engineering subjects effectively to cross functioning technical teams and upper management. Strong DFT and leadership skills will be put to good use. Successful Member of Technical Staff DFT engineer will interact with many external teams and must confidently represent his/her organization.

KEY RESPONSIBILITIES:

• Manage DFT engineers resolving technical challenges and meeting product schedule
• The role is in AMD global quality and operation organization driving best manufacturing test solution through pre and post silicon activities
• Work closely with design teams and make sure DFT structures are correctly implemented.
• Responsible for developing, implementing and verifying DFT schemes on hard-IPs in AMD ASIC and FPGA products.
• Responsible for developing and implementing techniques to test digital logic, using Scan Compression, Stuck-at, Transition and Path-Delay fault models
• Responsible for testing other parts of the design, including memory, mixed-signal, I/Os, custom LBISTs & MBISTs, IEEE1149.1 JTAG and IEEE1687 IJTAG
• Responsible to develop Firmware driven cost-effective test strategies/methodologies with built-in diagnosis capability to enable efficient debugging and fault isolation on bench/ATE
• Collaborate closely with the New Product Introduction and Test/Product teams to ensure timely delivery of robust test patterns, and manage debugging of pattern issues on bench/ATE to root cause the problem
• Assist in Diagnosis and Yield enhancement through product lifecycle
• Develop an adaptive and cohesive team to take up any challenging tasks entrusted by management

PREFERRED EXPERIENCE:

• Experience DFT engineering experience through DFT pre and post silicon cycles
• Experience in creating and implementing complex chip-level DFT architecture
• Experience in DFT implementation including Scan and Scan Compression at IP and SoC level
• Experience with DFT tools, ATPG (Stuck-At, At-Speed, Path-Delay) and scan compression.
• Strong MBIST knowledge
• Knowledge of Tessent Streaming Scan Network SSN and hand-on experience is a big plus
• Proficient in logic design using Verilog and experience in synthesis and STA
• Experience in developing test benches and simulation in RTL/GATE/SDF environments
• Knowledge of FPGA synthesis and design flow is a plus
• Experience with post-silicon debug and bench equipment (e.g., oscilloscope and logic analyser)
• Good communication skills, works well in a group environment that spans across continents
• Comfortable in Linux environment and writing/using scripting languages such as Perl, Tcl, etc

ACADEMIC CREDENTIALS:

• MS or Ph.D. in Electrical/Electronic/Computer Engineering

About Company

Founded in 2022, XG Tech is driving the future of smart vehicles. Its mission is to empower the digital transformation of automobiles, moving from distributed computing to a centralized, cross-domain platform.

XG Tech focuses on the intelligent cockpit—the next frontier of differentiation—while seamlessly integrating advanced driving systems. By reimagining cars as mobile living spaces, XG Tech aligns with the evolving trend of vehicles becoming the “third living space.”

Role Summary

As an IC Verification Engineer, you will lead the functional verification of complex IPs and SoCs. You will design and implement verification plans, build reusable testbenches, and collaborate closely with design teams to ensure high-quality, bug-free silicon.

Key Responsibilities

• Develop and implement comprehensive verification plans for IP and SoC levels.
• Architect and build reusable testbenches and verification environments using UVM (Universal Verification Methodology).
• Create directed and constrained-random tests to identify design bugs.
• Develop functional coverage and assertion checks to ensure verification completeness.
• Analyze simulation results, debug test failures, and work with design teams to resolve issues.
• Automate verification flows and regressions using scripting languages.
• Support emulation and FPGA prototyping efforts.

How you will stand out

• Bachelor’s or Master’s degree in Electrical/Electronics Engineering, Computer Science, or a related field.
• Solid experience in functional verification of ASICs/SoCs.
• Strong proficiency in SystemVerilog and UVM methodology.
• Experience with verification tools and simulators (e.g., VCS, Xcelium, Questa).
• Programming and scripting skills (e.g., C/C++, Python, Perl, TCL) are highly desirable.
• Knowledge of formal verification techniques is a plus.
• Strong analytical and debug skills with a keen attention to detail.
• Ability to work effectively in a collaborative, cross-functional team.

XG Tech is committed to providing equal employment opportunities by country, state, and local laws. XG Tech does not discriminate against employees or applicants based on conditions such as race, color, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

Job Summary

You will serve as a Full Time Site In-Charge, leading on-site operations to ensure safe, high-quality execution of tunneling works including Mined Tunnels and Cross Passages. You will collaborate closely with project teams to drive progress and uphold project standards.

Responsibilities

• Lead daily site operations to ensure timely and efficient work execution
• Assisting the project manager at times in need
• Apply knowledge of tunneling works such as Mined Tunnels and Cross Passages to oversee technical site activities
• Conduct regular inspections of construction sites to identify and eliminate potential safety hazards, ensuring a safe working environment
• Enforce site safety rules rigorously to minimize work-related accidents and injuries
• Supervise sub-contractors and in-house workers to maintain productivity and quality standards
• Collaborate with site operations staff to align work progress with the project schedule
• Verify that installations are performed according to construction drawings to meet design specifications
• Monitor work progress and quality continuously to ensure compliance with workmanship standards
• Attend daily tool-box meetings and communicate clear, actionable instructions to the workforce
• Ensure full understanding and compliance with project requirements and scope of work
• Prepare detailed Daily Reports and Production Reports to document site activities and progress
• Strong skills in interpreting and reading drawings
• Mechanical Knowledge needed
• Proficient in preparing Bar Bending Schedules (BBS) will be advantage
• Must be knowledgeable in AutoCAD usage and functions
• Fluent in English

This role is a 2 years renewable contract, location is in the East

Technical & Design Interface Management

•            Act as the primary on-site conduit between internal Engineering Team overseas and local stakeholders, translating complex technical design requirements into actionable site implementation plans.

•            Collaborate to ensure structural modifications, cable containment, and spatial provisions seamlessly accommodate new and refurbished subsystems.

•            Facilitate interface matrix alignment across all major project scopes, including new vehicles, Power Supply Distribution (PSD), Platform Screen Doors (PDS), Signalling, Communications and Guideway Track Infrastructure.

Stakeholder Coordination & Alignment

•            Serve as the technical interface point-of-contact for appointed consultants, driving the timely review and approval of Interface Control Documents (ICDs).

•            Serve as PIC for work permits

•            Coordinate directly with third-party main contractors and designated subcontractors to eliminate spatial clashes, scheduling conflicts, and execution overlap at the site office.

•            Organize and chair regular on-site Interface Coordination Meetings to resolve cross-package technical conflicts, tracking open items through an updated Interface Register.

Site Installation & Asset Modernisation Support

•            Carefully plan interface schedules for refurbishments (such as PSD modifications and signaling upgrades) to ensure zero impact on the live, daily operations of the existing system.

•            Oversee the structural and electrical readiness of the site prior to the delivery, installation, and integration of new vehicles and expanded infrastructure.

•            Assist the T&C teams in defining interface testing boundaries, ensuring all interconnected systems operate cohesively during local integration testing.

Documentation, Quality & Risk Management

•            Maintain, track, and regularly update the project’s Master Interface Register, proactively escalating critical design or installation bottlenecks to the Site Project Manager.

•            Review, filter, and track site RFIs from subcontractors and contractors, ensuring technical queries requiring input are routed and resolved expeditiously.

•            Identify potential scope creep or design changes arising from site interface issues, documenting them to support project management team in variations and risk mitigation.

If you are interested in any of the positions, do kindly drop your most updated resume to wendykhoo@recruitexpress.com.sg

Wendy Khoo Hui Wen (R1761665)
Recruit Express Pte Ltd
EA License: 99C4599

Shaping the Future of Regional Infrastructure: We Are Hiring

In the world of massive data scaling, the true challenge lies in bridging the gap between brilliant initial infrastructure design and long-term, unyielding operational resilience.

We are expanding our regional technical powerhouse. Reporting directly to the Head of Technical and Solutions, these roles are positioned to drive regional project delivery, cross-border operations, and global site evaluations.

If you are a visionary engineer ready to scale mission-critical facilities across Singapore, Malaysia, and the wider region, we want you on our team.

Lead Mechanical Engineer (Core & Reliability)

As the Lead Mechanical Engineer, you will drive the architectural design, implementation, and lifecycle reliability of thermal management systems across our regional data center footprint. You will ensure that our mechanical infrastructure—from initial site concept to live, active operations—meets stringent uptime Service Level Agreements (SLAs) while seamlessly supporting high-density, next-generation client requirements.

Key Responsibilities

• Design & Architecture: Spearhead and oversee the design of advanced thermal management systems, with a specialized focus on integrating liquid cooling architectures and high-density air-cooling solutions. You will develop standardized, modular mechanical blueprints that allow for concurrent maintainability, continuous cooling, and seamless capacity scaling without disrupting live operations. Additionally, you will evaluate and select mechanical equipment (chillers, CDUs, CRAC/CRAH units) based on efficiency, scalability, and long-term reliability.

• Reliability & Lifecycle Engineering: Embed Design-for-Reliability (DfR) principles into all mechanical designs and deployments, conducting extensive Failure Mode and Effects Analysis (FMEA) during the design and delivery phases. You will establish predictive maintenance frameworks utilizing telemetry and Building Management System (BMS) data to preempt mechanical degradation and optimize PUE/WUE. Following any mechanical anomalies, you will lead the post-incident lifecycle once root cause analysis (RCA) is established, ensuring findings are integrated into future system designs.

• Strategic & Cross-Functional Support: Provide deep technical validation and engineering support for complex client deployments and operations teams, particularly in high-density markets like Singapore. You will partner closely with design and delivery teams in Malaysia to ensure on-the-ground mechanical construction and operations align perfectly with design tolerances and multi-phase schedules. Furthermore, you will assess mechanical viability, environmental compliance, and local climate constraints across the region.

What You Bring

• A Bachelor’s or Master’s degree in mechanical engineering. A Professional Engineer (PE) or Chartered Technologist certification is highly preferred.

• Min 10 years of extensive experience in mission-critical infrastructure design and operations, specifically within large-scale data center environments.

• Demonstrated expertise in computational fluid dynamics (CFD), flow network modeling (FNM), liquid cooling systems, and advanced HVAC configurations.

Why Join Us?

• Be part of an expanding regional data centre platform backed by a reputable energy & infrastructure group.

• Gain exposure to hyperscale deals, JV structures, cross-border assets and high-value investments.

Send your resume in to:

Embedded Software/ Firmware Engineer

What a Software Firmware Engineer does at HP:

• Design enhancement, update, and programming changes for portions and subsystems of firmware.
• Analyze design and determine coding, programming, and integration activities required based on general objectives and knowledge of overall architecture of product or solution.
• Write and execute complete testing plans, protocols, and documentation for assigned portion of application; identifies, debugs and creates solutions for issues with code and integration into application architecture.
• Lead a project team of other firmware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for assigned systems portion or subsystem.
• Collaborate and communicate with management, internal, and outsourced development partners regarding firmware design status, project progress, and issue resolution.
• Represent the firmware engineering team for all phases of larger and more- complex development projects.
• Provide guidance and mentoring to less- experienced staff members.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or Master's degree in Computer Science, Information Systems, Electrical Engineering, or equivalent.
• Typically 6-9 years experience.
• Expertise in multiple firmware design tools and languages.
• Designing firmware, including interaction and integration with hardware design.
• Firmware testing methodology, including writing and execution of test plans, debugging, and testing scripts and tools.
• Ability to effectively communicate product architectures, design proposals and negotiate options at management levels.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Disclaimer

This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Job Responsibilities

• Lead the Extra-Low Voltage systems design on assigned large scale projects during the tender, design, procurement, construction, commissioning until finale client acceptance phase
• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of Lead Engineer, if necessary
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit, Gas Detection and Fire Alarm systems with the support of a Lead Engineer if necessary
• Design of Information Technology cabling System with the support of a Lead Engineer if necessary
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of Lead Engineer if necessary
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design
• Technical Evaluation of vendor submission including approval of shop drawings
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems
• Guiding ELV engineers / Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic

Job Requirements

• Degree in Instrumentation and Controls Engineering 
• At least 8 years of experience in design and construction
• Experience in design, installation, programming, commissioning of Process and Building control systems
• Experience in design, selection, installation, commissioning of Instrumentation for Process and Building control systems   
• Experience in Extra Low Voltage Systems such as Fire Alarm, Security systems, IT data network
• Experience in Advanced Technology Facilities, Life Science & Chemicals, Energy & Environment Technologies, High Tech Infrastructure, Process Automation, Products and Services
• Experience in construction management