Total 124 test engineer job vacancies in Penang

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training, and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support systems comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

As a Test Process Engineer, you will be responsible for sustaining, optimizing, and continuously improving the testing of the sputtered disks for the hard disk media manufacturing. This role supports high-volume manufacturing by ensuring stable test performance, strong process capability, high yield, and compliance with quality standards. You will work closely with Operations, Equipment, Quality, and R&D teams to drive data-driven improvements and support new technology introductions.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Troubleshoot and resolve Test cell yield issues to maintain product quality and throughput.
• Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.
• Monitor key process input variables (KPIVs) using tools such as the KPOV database, Maintenance Logs and the Digital Preventive Maintenance system.
• Drive and support equipment and process upgrade and continuous improvement projects to enhance performance and efficiency.
• Act as an upskilling trainer for test equipment/process, providing technical training and guidance to team members.
• Ensure compliance with ISO standards and documentation practices.
• Responsible for set up new measurement method which required from R&D and test process team.
• Measurement results (KPOV) analysis in PN.
• Coaching process engineer/technician to enhance their knowledge of instrument method and capability

As a Test Equipment Engineer, you will be responsible for sustaining, optimizing, and continuously improving the testing equipment for sputtered disks used in hard disk media manufacturing. This role supports high-volume manufacturing by ensuring stable test performance, strong equipment capability, and compliance with quality standards. You will also be responsible for test capacity planning and expansion, monitoring critical parameters related to test capacity and PPH. In addition, you will drive overall test-related projects to meet departmental objectives. The role includes managing equipment transfer and buyoff for new hardware and software enhancements, as well as installing and setting up test equipment such as testers, robotic automation systems, bagging systems, and conveyors. Ensuring test measurement accuracy and repeatability is also a key responsibility. You will work closely with Operations, Process, Quality, and R&D teams to drive data-driven improvements and support new technology introductions.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Troubleshoot and resolve test cell equipment issues to maintain product quality and manufacturing throughput.
• Transfer and implement test-related projects into production. Conduct investigations for quality incidents related to test equipment, and support root cause analysis and corrective actions.
• Monitor key equipment input variables (KPIVs) using tools such as the KPIV database, maintenance logs, and the Digital Preventive Maintenance system. Drive and support equipment and process upgrades, as well as continuous improvement initiatives, to enhance performance and efficiency.
• Improve and optimize test equipment to enhance quality, utilization, and PPH (Parts Per Hour). Act as an upskilling trainer for test equipment and processes by providing technical training and guidance to team members.
• Ensure compliance with ISO standards and proper documentation practices. Support the setup and implementation of new measurement methods required by the R&D and test process teams.
• Perform measurement results (KPOV) analysis in PN and coach process engineers and technicians to strengthen their knowledge of instrument methods and equipment capability.
• Follow all safety and health regulations and workplace requirements.

AGEO is a leading innovator in automation technology, specializing in solutions for heavy-duty operations. We develop cutting-edge embedded systems to support industrial vehicles in the most demanding real-world environments in the US.

We are looking for a Senior Embedded Software Engineer to take technical ownership of embedded firmware and system software that power autonomous and connected vehicle platforms. In this role, you will work across the full lifecycle, from early hardware bring-up and system architecture through field deployment and fleet updates, playing a key role in shaping the future of AGEO's autonomous systems.

What you'll do:

• Develop embedded firmware for custom ECUs and IoT devices used in vehicle platforms - from initial hardware bring-up through production deployment
• Write device drivers and integration layers for sensors and communication modules including GNSS receivers, LoRa/LoRaWAN modules, cellular modems, CAN/J1939 buses, etc.
• Build and maintain ROS2-based applications running on embedded Linux platforms, including containerized workloads and OTA update pipelines
• Collaborate closely with hardware engineers during schematic review, PCB bring-up, and hardware-software co-debugging on custom designs
• Define and maintain firmware architecture, interface specifications, and test procedures to ensure reliability, robustness, and maintainability in harsh field environments
• Lead improvements to CI/CD pipelines, automated testing, and release processes for embedded firmware

What we're looking for (Requirements):

• Strong C/C++ for embedded systems (bare metal, RTOS, and embedded Linux)
• Experience designing and maintaining production-grade embedded firmware with real hardware constraints
• Experience deploying containerized applications (Docker or equivalent)
• Experience working with embedded interfaces and buses: I2C, SPI, UART, CAN/CAN FD
• Experience with network protocols such as TCP/IP, UDP, HTTP, MQTT
• Experience with LoRa/LoRaWAN or other wireless communication protocols
• Proficiency using hardware debug and validation tools (logic analyzers, oscilloscopes, multimeter, etc.)
• Ability to read schematics, interpret IC datasheets, and work effectively at the hardware-software boundary
• Solid Git workflow for collaborative development and code review
• Good communication skills
• 4+ years of embedded software development experience

Education and Experience:

• B.S. degree or higher in Computer Engineering, Electrical Engineering, or equivalent

Nice to Have (Bonus):

• Experience with ROS2, including node architecture, and sensor integration, and system bring-up
• GNSS (RTCM, PPP, RTK) application knowledge and field deployment experience
• Python programming experience
• Unit testing and CI/CD experience
• RTOS expertise (QNX, Ubuntu RT, FreeRTOS, ZephyrRTOS) and Linux for edge compute (driver bring up and scheduling/timing)
• UML/SysML experience

• Competitive salary commensurate with experience
• Flexible working hours
• Paid holidays, sick leave, annual leave
• Medical and insurance coverage
• EPF, SOCSO, EIS contributions in accordance with Malaysian statutory requirements

• Job Summary:
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

The goal is to enhance the HAMR Glass media cleaning process for both current and new products by focusing on improvements in quality, cost, and production rate (PPH). This includes ensuring a smooth transition for new products from GO, establishing quality indicators for the cleaning process, and acquiring and qualifying a new cleaning system for mass production.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Continuous effort to develop/improve the cleaning process for HAMR Glass to meet the organization's goals and objectives for current and future new products.
• Execute and qualify new cleaning materials such as filters, chemicals, and brushes for the cleaning machine to align with the company's goal of having 2nd source for all materials.
• Work closely with the GO R&D team on the new cleaning process and ensure seamless product transfer to PN media.
• Execute cleaning machine pph and utilization improvement activities to meet sputter pph and product demand.
• Develop a new cleaning process in PN for new products that are introduced for mass manufacturing, because this machine is not available in GO.
• Focus on the latest Ultrasonic and Megasonic cleaning technology to tap the opportunities to introduce new sonication technology into current cleaning tools to improve cleaning efficiency.
• Align cleaning improvement activities with Manufacturing Engineering team objectives of sustaining and improving media yield and quality.
• Execute cleaning cost-saving activities to meet the company's CPD target.
• Sustain the cleaning process by sustaining in process indicators such as chemical concentration and media cleanliness particle counts.
• White paper, technical report, and documentation (SMO, TECN & PECN) write-up to ensure a smooth implementation of the new cleaning process following the ISO14000, ISO9000, OHSAS 18001 procedure.
• Leading Failure Mode Effect Analysis (FMEA) for the cleaning process and executing improvement actions to improve the robustness of the cleaning process for manufacturing.
• Work with the substrate team ( SWK ) (Front End NPP substrate team) to qualify new HAMR Glass substrate or improve substrate quality at the media level.
• Continue to build up technicians technical capability pertaining to cleaning process.
• Set up auto shutdown fixture to prevent the cleaning machine from producing bad quality parts.
• Set up auto shutdown to prevent the cleaning machine from producing bad quality parts.
• Preparing and updating Weekly Asia Cleaning Team Activities progress report.
• Follow all safety and health rules and contamination control.
• Conduct technical sharing on the topics related to media cleaning.
• Work with EHS team to set up a safety feature to prevent any accident in the work place.
• Work with vendors/suppliers for new process and new materials development.
• Work with procurement/SQE team for cleaning material quality improvement and inventory control.

The packaging scope includes various items such as labels, bags, foil bags, printer ribbons, cartons, and media storage, with a focus on maintaining quality, qualifying new materials, and collaborating with suppliers and teams globally. Responsibilities involve defining monitoring methods, managing packaging specifications, reacting to customer feedback, and ensuring smooth communication with quality assurance, supply chain, and production teams for ongoing engineering developments and annual requests for quotes.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Packaging scope covers cassette, cleanroom & non-cleanroom label, LPPE & HDPE bag, Foil bag, printer ribbon, carton box, pallet cover & sleeve, media storage requirement, and customer complaint-related issues.
• Maintain packaging quality and define the monitoring method.
• Qualify new packing material and implementation.
• Responsible for working with new/old suppliers, SQE, material lab, Planer, GCM, and Operation SPI on any engineering development of packaging material.
• Collaboration work with the WW packaging team (PN/SZ/GO).
• Maintain all packaging SOW for GCM and SQE to work with the vendor for getting yearly RFQ, sharing material, & Lab test spec.
• Maintain packaging material masterlist (Cassette & Label), example cassette & Label drawing, part number, artwork/component drawing.
• Responsible for reacting to react, resolving any customer feedback related to packaging matters with QA, SQE, and production.  

The key responsibilities include ensuring yield and quality meet Media Operation goals, monitoring indicators for abnormalities, troubleshooting issues, and coordinating evaluations with minimal supervision. The role also involves managing new product ramping during NPI transfers, identifying potential issues related to yield and quality, collaborating with other teams to address interaction defects, offering guidance to new engineers, and driving specific projects aimed at improving yield, quality, and utilization.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Maintain yield and quality that align with the Media Operation goal and target.
• Monitor the yield and quality indicators to make sure there are no abnormalities, and do troubleshooting for any issues related to yield and quality.
• Coordinate any evaluation related to yield and quality with minimum supervision.
• Accountable for new product ramping during NPI transfer.
• Identify potential yield, quality, and sputter utilization issues for the new product and work closely with related parties to solve the issues in the beginning stage.
• Work closely with other areas to solve any interaction defect issues.
• Provide guidance during working time and share experience with new engineers.
• Drive or handle specific projects for yield/quality or utilization improvement.

The role focuses on planning and coordinating sputter system activities, ensuring process compliance, and troubleshooting issues to improve utilization, yield, and quality. It involves leading Sputter Process Improvement Projects and supervising as well as training technicians and engineering specialists.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• To plan, coordinate, and follow up on sputter systems start-up/conversion activities and process documentation.
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process-related issues troubleshooting (common causes), work closely with the shift process team in sputter process sustaining, troubleshooting & improvement to achieve sputter utilization (downtime), yield & quality goals.
• To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise, and coach/train process tech, including engineering specialists and characterize technicians.
• Responsible for sputter process-related issues troubleshooting (common causes), working closely with the Shift process team in sputter process sustaining, trouble shooting & improvement to achieve sputter utilization (downtime) & quality goals.
• Responsible for leading and coaching/training process tech, including engineering specialists and characterization technicians. Responsible for training and sharing the PMR/DS sputter process and yield improvement knowledge with the team.
• Responsible for sputter parameters monitoring, including online SPC monitoring and procedure conformance.
• Responsible for sputter machine start-up, including process characterization (new products & process changes).
• Responsible for new products/machines/process qualification.
• Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules
• Responsible for assisting in sputter yield-related issues troubleshooting (common causes).
• Work closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order to achieve the sputter yield goal. This includes 0725 Operation Yield Improvement.
• The other supervisor assigned tasks.
• Improve Media magnetic baseline: ACC%, and enable process stability and repeatability via recipe tuning and optimization.
• Responsible for new product qualifications.  

The role involves planning and coordinating sputter system start-up and conversions, auditing sputter parameters for compliance, and troubleshooting process-related issues with the team to enhance sputter utilization, yield, and quality. It includes leading Sputter Process Improvement Projects, supervising and training process technicians, and managing long-term improvement initiatives while ensuring safety and adherence to health regulations. Additional responsibilities may be assigned by other supervisors.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• To plan, coordinate, and follow-up on sputter systems start-up/conversion activities and process documentation. 
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process-related issues troubleshooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (downtime), yield & quality goal.
• To initiate and lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise and coach/train process tech & SE, including engineering specialists and characterize technicians.
• Responsible for long-term improvement projects (SU/STT/Cost/Quality/PPH & others). Others include FMEA.
• Understand and accept responsibility for performing jobs safely.
• Follow safety and health rules.
• The other supervisor assigned tasks.