Total 124 test engineer job vacancies in Penang

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• Lead, manage and take ownership on the overall operational health of the HVAC and Mechanical system
• Maintain, operate all HVAC systems and associated equipment, plumbing systems, building management system, and equipment repairs
• Manage capacity and design changes according to the requirements from manufacturing/customers
• Conduct and execute facility system improvements on reliability hardening, safety performance as well as cost optimization and reduction
• Perform facility inspections and report on condition affecting operations.
• Monitor and supervise HVAC preventive maintenance outsource service contracts
• Maintain compliance to local city and state government requirement and overall country legal legislation, ordinances and codes of practices.
• Liaison with relevant local government agencies and contractors
• Engage and liaison with consultants on mechanical system design and construction.
• Respond to emergencies.
• Comply with all safety procedures, practices and requirements
• Support any afterhours building needs and activities as required
• Attend training sessions and seminars and other assigned tasks as requested.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

1. To establish the operation procedure, system monitoring & repair maintenance of responsible sections.
2. To review & analyze the operating data to optimize the Facilities operating system
3. To support production / manufacturing needs and request
4. To team up with all the facilities peers & contractors in troubleshooting the Facilities system
5. To identified & drive the cost saving & improvement program
6. To supervise contractor engineer and technician, routine job to ensure the HVAC & Mechanical system supporting production comply to specification and government regulation
7. Manage Mechanical System for multiple Plants.
8. To plan, organize, execute & control for the specific project
9. To ensure compliance to IMS requirement, Contamination Control, 5S & Safety
10. To liaise with contractor, consultant on the facilities related matters
11. To coordinate the major plan shutdown maintenance
12. To carry out special task as assigned by supervisor
13. To support the activities to the company needs

Lead Test Operations and Backend Manufacturing to support business growth, operational excellence, and manufacturing efficiency. Drive continuous improvement in cost, quality, productivity, automation, and capacity readiness while ensuring achievement of key operational KPIs and AOP targets.

 

Key Responsibilities

• Lead Test Operations and Backend Manufacturing.
• Drive manufacturing cost reduction and operational improvement initiatives.
• Monitor and improve key KPIs including LOH, Unit Cost, OTD, OEE, Process Cycle Time, and Yield.
• Drive automation, digitalization, and data-driven process improvements to enhance productivity and efficiency.
• Develop automation and smart manufacturing solutions to improve operational performance and reporting efficiency.
• Ensure facility and capacity readiness to support production and revenue plans.
• Drive quality improvement initiatives toward zero RMA and high product reliability.
• Support AOP goals through productivity, cost-saving, and variance improvement initiatives.
• Support customer audits and ensure compliance with ISO14001, ISO45001, and company standards.
• Lead, coach, and develop teams to support technology growth, NPI readiness, and operational excellence.
• Promote workplace safety, ESG initiatives, inventory optimization, recycling, and waste reduction activities.
• Work with ISO14001/ISO45001 team members closely in achieving ESG initiatives set by the company.
• Supports green energy, company wide inventory reduction efforts, recycle and elimination of waste.

Job Description

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

We are looking for experienced Reliability Engineer to join the Global Reliability Lab team. Supporting products qualification from development through high‑volume manufacturing. In this role, you will play a key part in defining reliability strategies, leading qualification activities, investigating failures, and driving long‑term product robustness.

You will work closely with cross‑functional teams including Design, Test, Failure Analysis, Manufacturing, Quality, and Suppliers to ensure our products meet stringent reliability, customer, and industry standards.

Key Responsibilities

• Execute reliability qualification plans for electronic components, and modules.
• Develop test strategies including HTOL, HAST, THB, TC, HTSL, PTC and mechanical stress tests.
• Review test results, analyze failures, and provide clear conclusions and recommendations.
• Assess risks related to new technologies, new materials, and new manufacturing processes.
• Ensure compliance to relevant JEDEC, IEC, MIL, IPC, and customer-specific standards.

PRINCIPAL ROLES & RESPONSIBILITIES:

• Support manufacturing, qual and engineering improvement including low yield analysis and improvement, failure analysis, test time optimization and other related activities.
• Support the test program conversion from legacy tester transfer to new tester platform.
• Support customer return evaluation (RMA).
• Dispose production low yield lots, verify rejects, and study/fix the root cause.
• Product bench test verification.
• FA support by doing ATE and bench analysis for fault isolation.
• Bench board construction and debugging.
• Test hardware development and troubleshooting

As a Principal Equipment Engineer specializing in sputter media manufacturing, you will serve as the technical authority and strategic leader for sputtering equipment, manufacturing technology, and engineering innovation within the organization. You will lead advanced equipment engineering initiatives, drive long-term technology roadmaps, and provide expert-level support for equipment reliability, manufacturing excellence, and next-generation HDD product development. This role requires strong technical expertise in sputtering systems, vacuum technology, automation, and advanced manufacturing processes, along with the ability to influence cross-functional organizations, mentor engineering teams, and lead large-scale strategic projects across multiple manufacturing areas.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead strategic equipment engineering initiatives to improve equipment reliability, manufacturing efficiency, OEE performance, and long-term operational sustainability.
• Lead complex equipment troubleshooting and advanced root cause analysis for critical manufacturing issues, implementing robust corrective and preventive actions.
• Develop and standardize best-in-class engineering practices, maintenance strategies, and equipment performance optimization methodologies across manufacturing operations.
• Lead major equipment upgrades, system redesigns, automation integration, and machine conversion programs to enhance manufacturing capability and productivity.
• Provide technical leadership for new equipment development, factory expansion projects, equipment qualification, commissioning, and production ramp activities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, Quality, Facilities, and Global Engineering teams to achieve manufacturing and technology objectives.
• Drive predictive maintenance, reliability engineering, and data analytics initiatives using SPC, equipment monitoring systems, and advanced failure analysis techniques.
• Lead engineering evaluations for new technologies, automation solutions, AI-driven manufacturing applications, and Industry 4.0 initiatives to improve operational performance.
• Establish equipment standards, technical specifications, engineering governance, and operational guidelines to ensure consistency across manufacturing operations.
• Provide expert guidance in vacuum systems, plasma generation, sputtering processes, automation controls, robotics, and equipment architecture optimization.
• Lead supplier technical engagements, OEM partnerships, and external engineering collaborations to support technology development, equipment enhancement, and problem resolution.
• Mentor and develop engineers, technical specialists, and engineering leaders by strengthening technical competencies, leadership capabilities, and knowledge-sharing culture.
• Drive cost reduction initiatives through equipment optimization, spare part management, energy efficiency improvements, and operational excellence programs.
• Lead engineering reviews, failure analysis discussions, and technical presentations for senior management and global engineering organizations.
• Ensure compliance with all safety regulations, company policies, environmental requirements, and industry standards related to equipment operation and engineering activities.
• Promote continuous improvement culture through Lean Manufacturing, Six Sigma methodologies, and engineering innovation programs.

To ensure the quality, functionality and reliability of a product before it released to the customer by identifying and diagnosing defects and issues

Key Responsibilities

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.
• Have knowledge on ATE tester platform e.g Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX & LTX tester

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

BROAD FUNCTIONS :

· To plan, coordinate and follow-up sputter systems start-up / conversion activities and process

documentation.

· To audit sputter parameters and practice periodically, include online SPC and procedure

conformance.

· To lead sputter process related issues trouble shooting (common causes), work closely with shift

process team in sputter process sustaining, trouble shooting & improvement in order to achieve

sputter utilization (down time), yield & quality goal.

· To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which

include new products/machines/process qualification.

· To lead, supervise and coach/train process tech, include engineering specialist and characterize

technicians.

RESPONSIBILITIES :

Regular

· Responsible for sputter process related issues trouble shooting (common causes), work closely

with Shift process team in sputter process sustaining, trouble shooting & improvement in order to

achieve sputter utilization (down time) & quality goal.

· Responsible to lead, supervise and coach/train process tech, include engineering specialist and

characterize technicians. Responsible to train and share PMR/DS sputter process and yield

improvement knowledge with the team.

· Responsible for sputter parameters monitoring, include online SPC monitoring and procedure

conformance.

· Responsible for sputter machine start-up include process characterize (new products & process

changes).

· Responsible for new products/machines/process qualification.

· Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).

Others include FMEA.

· Understand and accept responsibility for performing jobs safely

· Follow safety and health rules

· Responsible to assist in sputter yield related issues trouble shooting (common causes). Work

closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order

to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.

· Other supervisor assigned task

Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization. Responsible for new product qualifications.  

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.

Job Description

• Lead cross-functional teams across Design, Systems, Validation, Product/Test Engineering, Firmware, Supply Chain, Procurement, and Quality to ensure seamless program execution in NPI projects.
• Lead COGS reduction programs from impact assessment through qualification, PCN, safelaunch, and production ramp – quantifying savings, evaluating ROI, and assessing the business impact of schedule slips and risk scenarios.
• Drive capacity expansion initiatives across global manufacturing sites, aligning engineering, operations, and supply chain to support production scalability.
• Build and manage detailed schedules for NPI, COGS and capacity programs; track progress, remove roadblocks, and implement data‑driven mitigation plans.
• Manage Engineering Build Request prioritization, conducting bi‑weekly reviews with PMO and Business Operations leadership to ensure alignment with organizational priorities.
• Act as a liaison between the product group, operations/supply chain teams, and key OSAT interface teams to ensure alignment, clarity, and seamless execution across all stages of the program.
• Drive sample readiness and ramp readiness, ensuring cross‑functional teams maintain schedules that support committed customer delivery timelines.
• Coordinate and conduct Project Gate reviews, ensuring cross‑functional readiness, milestone alignment, and clear communication of risks and dependencies.
• Oversee wafer fab, assembly, and test operations to ensure timeline adherence, cost efficiency, and quality standards across programs.
• Provide structured leadership updates on program status, risks, and mitigation plans, maintaining accurate schedules and qualification documentation.

Job Summary

• We are seeking a highly skilled Senior Failure Analysis Engineer to join our team and drive advanced failure investigation in cutting-edge technologies, including AI-related products. Be part of a high-impact engineering team solving real-world reliability challenges

Key Responsibilities:

• Perform failure analysis at both physical package and die levels, identifying root causes and recommending corrective actions.
• Lead electrical fault isolation using advanced techniques & tools.
• Develop and execute bench-level test applications to validate hypotheses and reproduce failure mechanisms.
• Interpret CAD layouts, schematics, and design documentation to support failure root cause determination.
• Collaborate cross-functionally with design, process, product, and reliability teams to resolve complex technical issues.
• Support analysis for advanced technologies and AI-related products.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.