Total 243 software engineer job vacancies in Bukit Damansara

EindecSingapore Pte. Ltd. is hiring an Automation Programmer / Control SystemsEngineer to support cleanroom equipment automation and regional projectexecution, while also providing essential IT infrastructure support forinternal operations.

This role isprimarily focused on industrial automation (approximately 80%), including PLCprogramming, SCADA/HMI development, and EMS/BMS integration, with a secondaryresponsibility (approximately 20%) covering IT and OT support for Eindec’sSingapore office and Malaysia factory.

KeyResponsibilities

A.Automation & Control Systems (≈80%)

• Design, program, test, and maintain PLC control systems using Omron, Siemens, and Allen-Bradley (Rockwell Automation) platforms
• Develop, configure, and maintain HMI / SCADA systems for equipment monitoring, alarm management, and data logging
• Implement control logic for cleanroom equipment, including Air Showers, Fan Filter Units (FFU), and related control panels
• Perform software commissioning, troubleshooting, FAT, SAT, and on-site commissioning
• Interface equipment control systems with Building EMS / BMS / iBMS platforms
• Configure and troubleshoot industrial communication protocols such as Modbus, BACnet, TCP/IP, Ethernet/IP, and RS485
• Provide technical support for new installations, upgrades, and refurbishment projects
• Prepare and maintain technical documentation, including:

• Control architecture diagrams
• I/O lists
• Functional descriptions
• Operation and maintenance manuals

• Support product improvement, standardization, and value engineering initiatives

B. IT &OT Infrastructure Support (≈20%)

• Provide IT support for Eindec Singapore office and Malaysia factory, including:
• Server upgrade, configuration, monitoring, and backup management
• Data backup, recovery, and basic cybersecurity best practices
• Support network infrastructure, including:
• Network upgrade, configuration, and basic troubleshooting (LAN, switches, connectivity)
• Perform workstation and laptop setup, including:
• New workstation deployment
• Software installation and configuration
• Troubleshooting operating system, hardware, and performance issues
• Provide day-to-day IT troubleshooting support to ensure smooth office and factory operations

JobRequirements

Education

• Diploma or Bachelor’s Degree in Electrical Engineering, Automation, Mechatronics, Control Engineering, Computer Engineering, or related disciplines

• Proven experience in PLC programming using:
• Omron
• Siemens
• Allen-Bradley (Rockwell Automation)
• Hands-on experience with HMI / SCADA systems
• Strong understanding of industrial automation systems, control panels, sensors, actuators, and VFDs
• Experience in EMS / BMS integration is an advantage
• Basic to intermediate experience in IT infrastructure support, including:
• Servers and data backup
• Network troubleshooting
• PC and laptop setup and support

• Cleanroom, semiconductor, electronics, pharmaceutical, or high-tech manufacturing environments
• HVAC-related control or environmental monitoring systems

Soft Skills

• Strong problem-solving and analytical skills
• Ability to work independently and manage multiple priorities
• Good communication skills with internal and external stakeholders
• Willingness to travel within Asia for project and service support

OtherRequirements

• Willingness to travel overseas for project and service support when required
• Able to work independently and as part of a multidisciplinary team
• Strong problem-solving, communication, and documentation skills

WorkingHours

• Monday to Friday, normal office hours

Additionalhours may be required during commissioning or project critical phases

Job Responsibilities

• Assist Project Manager and Site Engineers in daily site operations.
• Coordinate and supervise construction activities on site.
• Monitor work progress and ensure compliance with project schedule.
• Prepare site reports, progress updates, and project documentation.
• Liaise with clients, consultants, subcontractors, and authorities.
• Assist in site inspections and quality control checks.
• Coordinate manpower, materials, and machinery deployment.
• Ensure compliance with workplace safety and environmental requirements.
• Attend site meetings and follow up on action items.

Requirements

• Diploma or Degree in Civil Engineering, Construction Management, or related discipline.
• Fresh graduates are welcome to apply.
• Basic knowledge of construction methods and engineering principles.
• Familiar with AutoCAD, Microsoft Office, and project documentation.
• Good communication and coordination skills.
• Positive attitude, responsible, and willing to learn.
• Possess Class 3 Driving Licence will be an advantage.

Job Summary

We are seeking a Financial Analyst cum Investment Software Developer. The ideal candidate combines creativity and has a passion for conceiving and implementing frameworks that drive smarter investment decisions. You will maintain existing systems and further develop it using your skills.

Responsibilities

• Maintain and develop existing investment software systems to meet evolving business requirements.
• Enhance data protection and security systems to safeguard proprietary investment software and sensitive information.
• Expand software capabilities for further developing the existing system.
• Collaborate with Investment Analysts to rapidly acquire domain knowledge and align software development with business needs

Preferred competencies and qualifications

• Demonstrate ability to independently conceive and build quantitative / analytical system.
• Strong skill in building quantitative data visualizations (charts, heatmaps, signal dashboards)
• Genuine passion for investing in financial markets
• Bachelor's degree in Computer Science, Software Engineering, Information Technology, Mathematics, Finance, or a related field

Only Selected candidates will be notified

Job Title: Technician / Assistant Engineer / Engineering Assistant (ID1579)
Location: Pioneer, transport pick up Island wide in Singapore
Working Hours: 4334 days 12 hours shift (Day & Night)
Salary: $2300 - $3000
Benefit: AWS, Variable Bonus

Job Description
• To specialise in processes and to perform higher level of troubleshooting and failure analysis
• Guide the technicians and operators to achieve required output and quality
• To check on the supplementary materials change to ensure they are properly done
• To assist Line Engineer to check all the control chart and checklist
• To ensure smooth production operation with production report
• To monitor, troubleshoot and improve the production daily final test yield
• To perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by Manpower supervisor

Job Title: System Application Engineer (ID3566)
Location: Boon Lay
Working Hours: Monday to Friday 9am to 6pm , Alternate Saturday 9am to 1pm
Salary up to : $4000- $5000

Job Responsibilities:
• Design and improve X-ray scan systems, including building prototypes and testing new designs.
• Write manufacturing and test procedures for equipment.
• Install, repair, and maintain equipment in the field while providing customer training as needed.
• Train manufacturing personnel on assembly and testing of products.
• Assist in integrating software with electrical control systems.
• Provide organized documentation for analysis and recommend design improvements.
• Assemble, test, and troubleshoot product designs, offering constructive feedback.
• Evaluate product performance using field data and recommend modifications or improvements.
• Travel globally for system evaluations, custom installations, and training purposes.
• Perform other duties as required.

Job Responsibilities

• Assist Project Manager and Site Engineers in daily site operations.
• Coordinate and supervise construction activities on site.
• Monitor work progress and ensure compliance with project schedule.
• Prepare site reports, progress updates, and project documentation.
• Liaise with clients, consultants, subcontractors, and authorities.
• Assist in site inspections and quality control checks.
• Coordinate manpower, materials, and machinery deployment.
• Ensure compliance with workplace safety and environmental requirements.
• Attend site meetings and follow up on action items.

Requirements

• Diploma or Degree in Civil Engineering, Construction Management, or related discipline.
• Fresh graduates are welcome to apply.
• Basic knowledge of construction methods and engineering principles.
• Familiar with AutoCAD, Microsoft Office, and project documentation.
• Good communication and coordination skills.
• Positive attitude, responsible, and willing to learn.
• Possess Class 3 Driving Licence will be an advantage.

Salary & Benefits

• Salary: SGD 2,800 – SGD 4,000 (depending on experience and qualifications)
• Performance bonus
• Annual leave and medical benefits
• Training and career development opportunities
• Friendly and supportive working environment

Working Hours

• Monday to Saturday
• 8:00 AM – 6:00 PM

Responsibilities and Duties

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

• To oversee all aspects relating to the construction of the Project, keeping and submitting records.

• To provide full support and assistance, as and when directed by the SRE or client

• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

• Any other Adhoc tasks are given by management

Qualifications and Requirements

• Min 4 years of civil engineering experience

• 2 years of experience advantageous in pedestrian overhead bridge, road, flyover construction

• Degree in Civil Engineering

• Accredited as a RE with IES

Roles & Responsibilities

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Produce tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Project coordination including submission to local authorities and liaison during the construction stage and site inspection with qualified site supervisors (RE/RTO).
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess minimum a Bachelor Engineering (Civil) degree recognized by PE Board.
• Engineers with minimum 2 years' relevant local experience in engineering design and project management.
• Conversant with latest design codes and authority requirements
• Be a team player with good attitude towards quality of work and timeline.
• Able to work independently to support the Qualified Person

Contract Period: 18 Months

Working Location: Central / 2 days WFH

Role Overview 

We are seeking an experienced Network Engineer with strong IoT and telemetry systems expertise to support the design and implementation of a technology platform. The role will focus on field device connectivity, open-standard data protocols, edge communications, and reliable data transmission from environmental sensors and data loggers into a central ingestion platform. 

The ideal candidate has hands-on experience working across the full telemetry lifecycle, from sensor and data logger integration to operational device monitoring, buffering, and bidirectional communication with cloud or central data systems. 

Key Responsibilities 

• Serve as a technical lead for IoT connectivity, telemetry integration, and field-to-platform communication design. 

• Design and implement communication flows between automatic weather stations, data loggers, and the central ingestion platform. 

• Work with environmental telemetry equipment, commercial data loggers, and equivalent field instrumentation systems. 

• Develop integrations using open-standard IoT protocols such as MQTT or equivalent messaging protocols. 

• Implement edge-side data buffering and retry strategies to handle intermittent cellular or field network connectivity. 

• Support device state monitoring, sensor inventory tracking, calibration offset handling, and operational management workflows. 

• Perform low-level data manipulation, including byte stream parsing, bitwise operations, and Big-Endian/Little-Endian data handling. 

• Collaborate with data engineers, service designers, field technicians, and project stakeholders to validate end-to-end system behaviour. 

• Contribute to technical documentation, integration specifications, and operational handover materials. 

Required Skills and Experience 

• Strong experience designing or implementing IoT, telemetry, SCADA-adjacent, or sensor data communication systems. 

• Hands-on experience with data logger integration and environmental sensor platforms. 

• Proficiency in scripting or programming for device communication, data parsing, and protocol handling. 

• Practical experience with MQTT or comparable IoT communication protocols. 

• Good understanding of cellular network reliability issues, offline buffering, retries, and edge connectivity patterns. 

• Ability to troubleshoot field-to-cloud data flows across hardware, network, protocol, and application layers. 

• Strong technical communication skills and ability to work with both engineering and operational teams. 

Good to Have 

• Experience with meteorological, environmental monitoring, utilities, transport, industrial IoT, or mission-critical operational systems. 

• Familiarity with time-series data ingestion, device health monitoring, and calibration workflows. 

• Experience contributing to early-stage platform builds that later transition into production-grade platforms. 
  

Contract Period: 18 Months

Working Location: Central / 2 days WFH

Role Overview 

We are seeking a Full Stack / Data Engineer to design and build a high-performance data ingestion and API platform for automatic weather station data. The role will focus on cloud-based ingestion pipelines, time-series data storage, quality control logic, and APIs for high-frequency data insertion and retrieval. 

The ideal candidate has strong experience building scalable backend systems for real-time or near-real-time data, with the ability to work across ingestion architecture, data modelling, API design, and operational reliability. 

Key Responsibilities 

• Architect and implement high-throughput data ingestion pipelines for telemetry and sensor data. 

• Build backend services and APIs for data insertion, retrieval, configuration, and operational platform functions. 

• Design low-latency RESTful, gRPC, or equivalent APIs for high-frequency time-series workloads. 

• Implement streaming or near-real-time quality control logic, including anomaly detection and configurable validation rules. 

• Design non-proprietary time-series schemas that support efficient storage, retrieval, governance, and future extensibility. 

• Support access control, data governance, auditability, and secure integration patterns. 

• Collaborate with IoT/network engineers to define ingestion contracts, payload formats, protocol boundaries, and error handling. 

• Work with stakeholders to validate performance, stability, and reliability against agreed platform requirements. 

• Contribute to system documentation, deployment notes, API specifications, and operational handover materials. 

Required Skills and Experience 

• Strong backend engineering experience with high-throughput, cloud-based data platforms. 

• Experience designing and operating data ingestion pipelines for streaming, telemetry, sensor, IoT, or time-series data. 

• Proficiency in at least one modern backend language such as Python, Java, Go, Node.js, or similar. 

• Experience designing production-grade APIs, including REST, gRPC, or equivalent programmatic interfaces. 

• Familiarity with time-series databases, relational databases, data lakes, or scalable storage systems. 

• Understanding of performance tuning, data partitioning, batching, backpressure, observability, and reliability patterns. 

• Ability to work across data engineering, backend development, and platform integration concerns. 

Good to Have 

• Experience with cloud services, containerized deployments, CI/CD, infrastructure-as-code, or managed streaming technologies. 

• Familiarity with data quality frameworks, rules engines, or anomaly detection for operational data. 

• Experience with environmental, geospatial, industrial IoT, or mission-critical data systems. 

Interested candidates who wish to apply for the above positions, please click "Apply now"

We regret that only shortlisted candidates will be notified.

We are seeking a skilled and proactive IT & Network Engineer to support, maintain, and optimize our organization’s IT infrastructure and network systems. The ideal candidate will be responsible for ensuring system reliability, security, and performance across all IT environments, while providing technical support to end users and participating in infrastructure projects.

Job Description & Requirements:

• Networking skills (basic understanding, configuration, and settings of routers, switches, Wi-Fi access points, VLANs, routing, and troubleshooting)
• L2/L3 Windows administration (basic understanding, configuration, and settings of the full Wintel stack: AD, DNS, DHCP, GPO, and basic scripting)
• Linux (comfortable with CLI administration, LVM, Apache, and Tomcat)
• Solaris (comfortable with CLI administration, SVM, and Tomcat)
• Firewall appliance experience (basic understanding, configuration, and settings)
• Vendor management and case reporting
• Front-end user support
• Customer office site support (network infrastructure, Windows administration, and end-user support)

Education & Experience:

• Minimum ITE Diploma
• 2-4 years experience in IT infrastructure and network management

Key Competencies:

• Strong problem-solving and troubleshooting skills
• Ability to work independently and in a team environment
• Proactive mindset with a focus on continuous improvement

Responsibilities and Duties

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract

• Advise the PRPM/SPM/PM on site quality and safety issues.

• Determine any non-conformances on works

•Liaise with Contractor to rectify any non-conformances and document them properly

• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.

• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety

• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site

• Supervise installation of instrumentation and monitoring of instrumentation

• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Qualifications and Requirements

• Minimum Degree in Civil and Structural Engineering

• Minimum 5 years relevant experience in project/construction environment

• Proficient in relevant software programmes for planning and project work

• Pro-active team player with good analytical and communication skills

•Required to have at least 2 years of viaduct and/or flyover construction experience

Company Overview

EDPN Technologies is formed by multi-disciplinary professionals and consultants focused on delivering cost-effective, technically viable solutions that enhance customer service and satisfaction.

Job Summary

You will support the sales team by conducting site surveys, installing and commissioning hardware and software products, performing maintenance and repairs, and providing technical support to ensure timely, budget-compliant project completion.

Responsibilities

• Conduct site surveys to gather accurate project requirements and support the sales team’s customer engagements
• Install and commission hardware and software products sold by the company to ensure full operational functionality
• Perform preventive maintenance and on-site repairs to maintain product reliability and minimize downtime
• Conduct pre-delivery inspections and testing to verify product quality before deployment
• Execute in-house repairs to restore product performance and extend equipment lifespan
• Carry out site and factory acceptance tests to confirm compliance with project specifications
• Provide 24/7 standby support for corrective maintenance and technical troubleshooting to resolve issues promptly
• Coordinate with contractors, consultants, and end-users to ensure projects and installations meet deadlines and budget constraints
• Assist with wiring, cabling, and system integration tasks to support seamless product functionality
• Prepare detailed AutoCAD drawings to document system layouts and installations accurately

1) Qualifications

• Degree in Electrical Engineering recognised by PEB
• A masters’ Degree or PEB license would be an advantage
• 2-5 years working experience in design and consultancy firm and design of electrical services.
• Fresh graduate will be considered as well.

2) Business Development

• Begin to build relationships with clients and consultants from other organisations.

3) Project Role

• Carry out duties in accordance with company procedures and implement prescribed systems of work.

4) Company Role

• Follow the company training scheme fulfilling objectives to assist personal development and provide a basis for future progression within the company.
• Contribute to the development of the company systems by reviewing existing procedures and commenting using the feedback system.
• Begin to take part in task groups to represent the team that you are working in.
• Attend team meetings providing feedback on your/company development where possible.
• Applying policies relating to health & safety, quality and training

5) Engineering Function

• Role is an Engineer within a team working under close supervision or independently.
• Responsible for development and production of drawings/calculations/specifications/reports.
• Understand design philosophy/design fundamentals.
• Be familiar with Architect/Service Engineers drawings/specifications etc.

6) Behavioral

• Carry out tasks and duties assigned in a positive and dignified manner.
• Set an example to placement students and younger engineers.

7) Competencies

• Business Awareness
• Team Working
• Building Relationships
• Developing Self & Others
• Persuading and Influencing
• Communicating and Presenting
• Delivering Results
• Improving Performance

Field Service Engineer / Customer Engineer – Role Summary
Key Responsibilities

• Support Senior Field Service Engineers (Customer Engineers) with installation, maintenance, troubleshooting, and equipment upgrades at customer sites.
• Utilize digital analytics and diagnostic tools to identify and resolve equipment issues.
• Perform preventive and corrective maintenance on:Electrical systemsVacuum systemsMechanical systemsPlasma systemsHydraulic systemsGas delivery systems
• Communicate and coordinate directly with customers regarding service activities and equipment status.
• Carry out additional assigned operational and technical duties.

Minimum Qualifications

• Associate degree, military technical training, trade certification, or equivalent field service experience.
• 1–2 years of experience in field service, customer support, equipment maintenance, or a related technical role.
• Ability to read and understand electrical and mechanical schematics.
• Basic troubleshooting and diagnostic experience.
• Fundamental knowledge of:PneumaticsHydraulicsElectronicsVacuum technologyThermodynamics
• Familiarity with hand tools and test equipment such as digital multimeters.
• Good written and verbal communication skills.
• Basic proficiency in Microsoft Excel, Word, and PowerPoint.
• Valid driver's license and ability to obtain a passport if travel is required.
• Ability to comply with customer site safety, environmental, and health requirements.

Preferred Qualifications

• 2–4 years of experience in field service support or a related technical field.

Physical & Work Environment Requirements

• Frequent walking and standing for extended periods.
• Ability to work in confined spaces and perform physical tasks such as bending, kneeling, squatting, twisting, reaching, and climbing ladders or stairs.
• Ability to work at heights and lift up to 35 lbs (16 kg).
• Capability to distinguish colors for electrical and equipment work.
• Comfortable working around electrical systems and in noisy environments.
• Regular use of hand tools and power tools.
• Work is primarily conducted in a semiconductor cleanroom environment requiring:CoverallsHoodsBootiesSafety glassesGlovesRespiratorsChemical apronsFace shields