Total 156 Senior Executive process improvement manager job vacancies in The Philippines

Job Objectives

• To develop III-V semiconductor etch, clean tech andLapping processes and capabilities aligned to company’s technology and product roadmap and integrated with in-house manufacturing capabilities.
• Define process andequipment roadmap for photonics related Etch, Clean tech and Lapping processes.Support of new technology prototype process set up and demonstration. Transferof process to manufacturing counterpart upon maturity. Involve in new equipment selection, evaluation and start up.

Duties and Responsibilities

• Knowledge of Etch chemistries, Recipe design, RF power basics, Vacuum basics, Etch chamber dependencies, Gas flow kinetics 
• Develop & Execute III-V etch recipes (Indium Phosphide, GaAs), dielectric etch (SiN, SiO2, SiON, others) and Ashing recipes.
• Knowledge of clean tech chemistries for III-V compounds including gold wet etch and others.
• ·Develop clean tech chemistries for III-V compounds.
• ·Ownership of Lapping and backgrind processes that cover operationalize, process improvement plans, Cost saving opportunities.
• Knowledge of process characterization techniques inclusive of dimensional conformance and surface condition outcome
• Manage and improve Etch and Clean Tech process stability and control through SPC , tool and product monitoring for consistent yields.
• Knowledge of DOE tools, problem solving techniques (8D, Fishbone, Is/Is not, FMEA, Cuase & Effect analysis)
• Closely monitor status of all Etch and clean tech equipments and work with equipment team to resolve any arising equipment issues
• Certification of operators performing any etch and clean tech processes to ensure compliance to established qualified processes.
• Execute development & improvements plans by ensuring that manufacturing processes, procedures, and associated process validations, inclusive of improvement of process flow, part manufacturability process capabilities with LEAN methodology
• Maintain current knowledge of relevant technology as assigned, and participate in special projects as required.
• Should know New tool / back up tool qualification procedures, process streamlining and standardization.

Qualification Guidelines

Minimum Education

Bachelor or higher degree

Minimum Experience

A minimum 5 years of experience in Etch and Clean Tech wafer fabrication processes with some experience in process development, operations management in the field of photonics and Si based semiconductors

Specific Knowledge / Skills

Possesses strong communication skills and the ability to coordinate cross-functionally with R&D, Quality and Operations,

Understanding process validations. Experience using Lean Manufacturing tools. Strong knowledge of Etch and Clean Tech processes.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

You will be part of the team managing Outsourced Semiconductor Assembly and Test (OSAT). 

YOUR ROLE 

• Demonstrate competency in process engineering and collaborate with the regional team to ensure compliance with test processes and controls at OSATs.
• Responsible for the overall success of test and finishing related policies, processes, tools, and solutions deployment to OSATs.
• Responsible for overall finishing (visual inspection, packing etc) compliance at OSATs
• Demonstrate competency in process engineering and collaborate with the regional team to ensure compliance with test processes and controls at OSATs.
• Drive improvement of OSAT test and finishing capabilities and processes to conform to ST requirements.
• Benchmark OSAT test and finishing capabilities and solutions
• Manage NPI qualification to MP process for test and finishing across all OSATs, including technical gap analysis, review, and approval.
• Manage process changes related to test at OSATs.
• Contribute New Product Introduction (NPI) qual to Mass Production (MP) process for test and finishing across all OSATs
• Responsible for Unit Level Traceability (ULT) with 2DID, to formalize, deploy and implement at OSATs test and finishing
• Perform value engineering analysis for test and lead value engineering projects at OSATs.

YOUR SKILLS & EXPERIENCES

• Bachelor degree in any engineering, or relevant discipline
• 2 to 5 years of experience in semiconductor industry
• Experience in NPI, qualification, production and finishing procedures and processes in semiconductor EWS and test manufacturing.
• Familiar in packing requirement for shipment
• Experience with data analysis techniques and tools, and understanding of test application requirements, including data integrity, STDF, SBL, SYL, SPL, and PAT (EWS and FT).
• Proficient in project management and familiar with OSATs.
• Familiar with semiconductor tester platforms, handlers, and probers.
• Experience with test analysis tools, such as silicon.DA, is an advantage.
• Self-motivated and self-driven, able to commit to and meet deadlines.
• Proficient in Excel and PowerPoint, and able to present and communicate ideas and recommendations effectively.
• This position requires travel to the region and may require travel on short notice.

This role presents an opportunity to play a critical part in supporting our tied agency distribution channels and financial advisory firm. You will contribute to our mission by ensuring Training & Competency (T&C) operational processes are robust, compliant, and aligned with evolving regulatory and business needs. Through this role, you will gain exposure to cross-functional collaboration, regulatory-driven initiatives, and system enhancements while helping deliver a seamless point-of-sale experience for our agents and advisors.

Position Responsibilities:

• Implement and update sales advisory frameworks to ensure adherence to regulatory requirements, including MAS and LIA guidelines, as well as internal policies.

• Serve as the subject matter expert for enquiries related to sales support and sales advisory process flows.

• Partner with IT and key stakeholders to drive system enhancements, including defining enhancement scope, preparing user stories, developing test plans, and conducting user acceptance testing (UAT).

• Review, implement, and maintain business rule guidelines related to T&C operations on a regular basis.

• Provide operational support for business-as-usual (BAU) activities and assigned projects related to future ways of working.

• Ensure clear, accurate, and timely communication with agents regarding the status and progress of their requests.

• Perform quality checks and audit sampling to ensure compliance with regulatory requirements; manage audit and regulatory enquiries within scope.

• Prepare, review, and present management reports, summaries, and presentation materials.

• Organize and conduct training sessions, briefings, and workshops for the sales force.

Required Qualifications:

• Bachelor’s degree from a recognized university.

• Minimum 2–5 years of relevant experience in the life insurance industry, preferably within advisor operations or sales support.

• Experience supporting T&C frameworks or regulatory-driven operational processes.

• Exposure to MAS or LIA regulatory requirements within the financial services industry.

• Strong working knowledge of life insurance products, FAA investment products, and sales advisory processes.

• Hands-on involvement in system implementation or enhancement initiatives, including UAT.

• Proficiency in Microsoft Office applications, including MS Excel, MS Word, MS PowerPoint; Power BI experience is preferred.

• Strong analytical and problem-solving abilities with high attention to detail.

• Proven stakeholder management and communication skills. ​

When you join our team:

• We’ll empower you to learn and grow the career you want.

• We’ll recognize and support you in a flexible environment where well-being and inclusion are more than just words.

• As part of our global team, we’ll support you in shaping the future you want

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Job Summary:
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

The goal is to enhance the HAMR Glass media cleaning process for both current and new products by focusing on improvements in quality, cost, and production rate (PPH). This includes ensuring a smooth transition for new products from GO, establishing quality indicators for the cleaning process, and acquiring and qualifying a new cleaning system for mass production.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Continuous effort to develop/improve the cleaning process for HAMR Glass to meet the organization's goals and objectives for current and future new products.
• Execute and qualify new cleaning materials such as filters, chemicals, and brushes for the cleaning machine to align with the company's goal of having 2nd source for all materials.
• Work closely with the GO R&D team on the new cleaning process and ensure seamless product transfer to PN media.
• Execute cleaning machine pph and utilization improvement activities to meet sputter pph and product demand.
• Develop a new cleaning process in PN for new products that are introduced for mass manufacturing, because this machine is not available in GO.
• Focus on the latest Ultrasonic and Megasonic cleaning technology to tap the opportunities to introduce new sonication technology into current cleaning tools to improve cleaning efficiency.
• Align cleaning improvement activities with Manufacturing Engineering team objectives of sustaining and improving media yield and quality.
• Execute cleaning cost-saving activities to meet the company's CPD target.
• Sustain the cleaning process by sustaining in process indicators such as chemical concentration and media cleanliness particle counts.
• White paper, technical report, and documentation (SMO, TECN & PECN) write-up to ensure a smooth implementation of the new cleaning process following the ISO14000, ISO9000, OHSAS 18001 procedure.
• Leading Failure Mode Effect Analysis (FMEA) for the cleaning process and executing improvement actions to improve the robustness of the cleaning process for manufacturing.
• Work with the substrate team ( SWK ) (Front End NPP substrate team) to qualify new HAMR Glass substrate or improve substrate quality at the media level.
• Continue to build up technicians technical capability pertaining to cleaning process.
• Set up auto shutdown fixture to prevent the cleaning machine from producing bad quality parts.
• Set up auto shutdown to prevent the cleaning machine from producing bad quality parts.
• Preparing and updating Weekly Asia Cleaning Team Activities progress report.
• Follow all safety and health rules and contamination control.
• Conduct technical sharing on the topics related to media cleaning.
• Work with EHS team to set up a safety feature to prevent any accident in the work place.
• Work with vendors/suppliers for new process and new materials development.
• Work with procurement/SQE team for cleaning material quality improvement and inventory control.

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades.

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including coordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Responsibilities

• Provide technical leadership and manufacturing processes, ensuring stable, high-yield production
• Lead process optimization and scale-up for resin systems, impregnation, drying, lamination, and curing processes
• Drive process qualification and validation for new materials, formulations, equipment, and process changes
• Perform advanced troubleshooting and root cause analysis to resolve yield, delamination, voids, and surface quality issues
• Establish and improve process control strategies (SPC, Cp/Cpk) for critical parameters such as resin content, gel time, flow, and curing profiles
• Analyze production data to implement continuous improvement initiatives for yield, cycle time, and throughput
• Collaborate with R&D, Quality, and Production teams on formulation improvements, NPI, and technology transfer
• Lead engineering and productivity improvement projects, ensuring measurable gains in efficiency and cost
• Drive initiatives to reduce scrap, improve material utilization, and enhance on-time delivery (OTD)
• Develop and maintain process documentation (SOPs, work instructions, control plans) to ensure consistency and compliance
• Ensure adherence to EHS, quality, and industry standards, particularly in handling resins, solvents, and high-temperature processes
• Mentor junior engineers and act as process owner/SME, supporting capability development and operational excellence
• Perform any other reasonable duties as required by Management from time to time

Requirement

• Bachelor’s Degree in Engineering (Chemical, Materials, Mechanical or related)
• Minimum 10 years of experience in manufacturing industry
• Proven expertise in process control, yield improvement, and problem-solving methodologies (SPC, DOE, Six Sigma)
• Experience in NPI, scale-up, and cross-functional project leadership

Interested applicant, please do include the below in your resumes:

Reason for leaving your last and current employment
Last Drawn Salary and Expected Salary
Earliest Availability

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Scope

• Conducting regular site inspections and audits to identify and mitigate potential health, safety and environmental risks

• Developing and implementing safety policies, procedures and training programs to enhance employee awareness and compliance

• Investigating incidents and accidents, and implementing corrective actions to prevent recurrence

• Liaising with regulatory bodies and ensuring all necessary permits and licenses are up-to-date

• Providing guidance and support to plant operations teams on EHS-related matters

• Maintaining comprehensive records and documentation to demonstrate compliance with relevant regulations

• Continuously reviewing and improving EHS management systems to drive continuous improvement

Requirements:

• Minimum 3 years of experience in an EHS role, preferably within the process manufacturing industry

• Understanding of process safety, specifically including knowledge of QRA, HAZOP, and LOPA is highly advantage

• Registered WSHO  is a plus

• Strong knowledge of relevant EHS regulations and best practices

• Excellent problem-solving and analytical skills to identify and mitigate risks

• Effective communication and interpersonal skills to collaborate with cross-functional teams

• Proficiency in project management and data analysis

• Demonstrated ability to drive continuous improvement and change management

Ready to elevate your career? We never charge our candidates. Take the leap and send your resume today to engg1@talenttradersg.com or julie@talenttradersg.com. Let's unlock your potential together!

EA License No: 13C6305

Reg. No.: R1981808/JULIE RODRIGUES LUBRIN

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Job Description & Requirements

Micron’s Singapore Technology Development (TD) team is seeking a passionate and driven Process Development Engineer to support the rapid deployment of advanced NAND technology nodes. This role is critical in enhancing process margins, integrating new technologies into manufacturing, and collaborating globally to shape the future of memory technology.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements

• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.

• Design and implement advanced process monitoring and control methodologies.

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.

• This position requires communications and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must.

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry and related

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport

• Minimum 4 years of experience in Semiconductor Wet Process development is required

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data

• Working knowledge of Design of Experiments (DoE)

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Ability to be a self-motivated individual and be adaptable

• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously

• Display Micron Value of People. Innovation, Tenacity, Collaboration and Customer Focus

Micron’s Singapore Technology Development (TD) team is seeking a passionate and driven Process Development Engineer to support the rapid deployment of advanced NAND technology nodes. This role is critical in enhancing process margins, integrating new technologies into manufacturing, and collaborating globally to shape the future of memory technology.

Key Responsibilities

• Develop and optimize unit processes to meet yield and quality targets for advanced NAND devices

• Evaluate innovative process and equipment solutions for early experimentation and process margin improvement

• Collaborate with Singapore-based Diffusion manufacturing teams to identify and prioritize key technology challenges

• Integrate and troubleshoot processes within cross-functional teams focused on yield and quality enhancement

• Partner with Boise TD Films teams to align future device requirements with process capabilities

• Identify disruptive process technologies early and define viable implementation paths with global TD and manufacturing teams

• Conduct fundamental research, hardware evaluations, and novel process testing to support intellectual property generation

• Design and execute experiments to expand process margins and validate manufacturability of next-node solutions

• Lead cross-functional initiatives to simplify processes and implement improvements

• Embed best-known manufacturing practices into early-stage development of new nodes

• Develop and apply advanced process monitoring and control methodologies.

• Serve as a technical expert, contributing to process, equipment, and procedural improvements

• Lead multidisciplinary projects across teams, sites, and suppliers focused on quality, yield, cost, and productivity

• Advise management on significant technical issues and drive innovation through patents and technical publications

• Maintain strict adherence to Micron’s Intellectual Property protection policies

• Engage continuously with global TD partners and suppliers to push for breakthrough solutions

• Own and manage module-level business processes

Requirements

• Bachelor/Masters in Materials Science, Electrical/Electronics, Chemical, Microelectronic Engineering, Physics with minimum 5 years of relevant experience or PhD in Materials Science, Electrical/Electronics, Chemical, Microelectronic Engineering, Physics

• Strong understanding of:

• - Flow dynamics, thermodynamics, and physical phenomena in deposition

• - Precursor depletion effects in 3D structures and mitigation strategies

• - Interface characterization techniques (e.g., SIMS, XPS, EDX, SEM/TEM)

• - Integration and structural constraints in film deposition processes

• - Memory process flows, especially for planar and vertical NAND

• Proficiency in data analysis tools (e.g., Y3) and Design of Experiments (DoE)

• Excellent communication skills for both in-person and remote interactions

• Self-motivated, adaptable, and capable of managing multiple projects in a dynamic environment

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Your responsibilities will include, but are not limited to, the following:

• Identify and quantify key module deficiencies and technology gaps. Lead cross-functional teams to address these issues. Improve current process flows and develop innovative solutions to meet product requirements and manufacturability.

• Develop or redefine CSPEC criteria for optimal product performance and drive activities to ensure manufacturing process capability.

• Coordinate activities at the manufacturing site to secure funding for experiments, and conversions, and effectively communicate decisions to relevant R&D, Product Engineering, and Manufacturing partners.

• Undertake development projects to evaluate and implement new integration schemes for alpha and derivative part types. Establish proof of concept for future tech nodes at the manufacturing facility.

• Take on a leadership role at quarterly yield summits and monthly program reviews to summarize complex problems, explain actions taken to address them, and align R&D, Manufacturing, and senior management teams.

• Assist in the transfer of new technology from R&D to manufacturing. Contribute to ensuring a successful ramp-up and qualification. Support the transfer, documentation, and training of module fundamentals into manufacturing.

Requirements:

Must have:

• Minimum of 3 years of experience in front end semiconductor industry in the area of Process Integration (PI), with a proven track record in innovation

• Strong knowledge on the fundamentals of semiconductor processing technology, with essential knowledge on semiconductor device physics

• Ability to develop a strong holistic end-to-end understanding of particular PI modules on new NAND technologies and related structural & electrical fail mechanisms

• Adept at data analysis, problem-solving, and process integration optimization

• Excellent communication skills and ability to work in cross-functional teams

• Able to support beyond office hours or weekends when necessary

Preferred to have Skills / Experiences as below:

• Direct experience in Process integration early phase Technology Development is a strong bonus

• Proficiency in scripting/programming/engineering/business intelligence/Analytics software, such as Python, SolidWorks, Tableau, Power BI, etc. is desirable

• In-depth knowledge and direct experience with non-volatile memories (NAND) along with good understanding of the NAND process flow, the interaction of process & device, common yield & reliability issues are desirable

• Committed to quality, collaboration, and continuous improvement

• Ability to be self-motivated, and self-governing with proven ability to work in a demanding & dynamic environment

• Passion, growth mindset, tenacity, proactiveness, lead with urgency

Education:

BS, MS/PhD in Electrical Engineering, Microelectronics, Chemical Engineering, Material Science or a related field