THE ROLE:

As a senior staff member of the product characterization team, you will evaluate the performance of AMD AECG products, develop, lead and characterize the next generation Memory Controller IPs.

THE PERSON:

• Strongly motivated individual from post-silicon validation background.
• Excellent communication and presentation skills, demonstrated through technical publications, presentations, training, executive briefings, etc.
• Adept at collaboration and mentorship skills to train and guide fellow engineers and elevate the skills of the team around you.

KEY RESPONSIBILITIES:

• Gain expertise into the AMD SoC architecture to characterize next generation Memory Subsystem (Controller, PHY and IO) for various supported protocols such as DDR4, LPDDR4, DDR5, LPDDR5, DDR6 and LPDDR6.
• Understand Pattern development nuances and guide the team for bench data collection and debug with lab instruments when necessary.
• Work closely with cross functional teams from design and firmware side to identify key new features, firmware stability and ensure proper test coverage for the same.
• Drive continuous improvement initiatives on automated test scripts and test frameworks for efficient data collection, test-time optimization and data analysis.
• Stay updated with the latest developments in Memory specifications and trends to inform product strategy and direction
• Statistical data analysis to post process volume results for data correlation across Process corners and outlier analysis.
• Responsible for isolating the issue to a specific area such as test gaps, SW bug, silicon bug, or process deviation using bench setup and instill good debug practices in the team.
• Drive cross-functional discussions to address the issues uncovered from debugs and collaborate for ensuring screens are in-place for gaps identified.

PREFERRED EXPERIENCE:

• Extensive years of experience into post-silicon validation with strong background on SoC validation and system level testing.
• Technical leadership experience leading a small group of senior engineers.
• Strong understanding of ARM SoC architecture and Memory protocols such as DDR5 and LPDDR5.
• Experienced on bench testing and debug skills with lab instruments usage.
• Proficiency in using test equipment such as oscilloscopes, logic analyzers and protocol analyzers.
• Experienced in Linux environment, data analysis and scripting languages (e.g. Python, Perl) for automation and data processing.
• Strong communication and leadership skills, including data presentation and ability to work well in a group environment that spans across continents.
• Experience with AMD/Xilinx Vivado and FPGA design flow is a plus.

ACADEMIC CREDENTIALS:

• BS in EE, CS, ECE or related field; MS preferred.

The Project Development/Service Engr will be responsible for overseeing and managing multiple projects from initiation to completion. This role requires strong leadership skills, excellent organizational abilities, and a proven track record of successfully delivering projects on time and within budget.

Project Planning and Execution:

o Develop project plans, including timelines, resource allocation, and budgets.

o Coordinate project activities, ensuring adherence to project objectives, timelines, and deliverables.

o Monitor project progress, identify and resolve issues, and manage changes to project scope.

o Propose, design and develop novel applications involving sensors and control systems for sustainable Industrial 4.0 applications.

o Perform system integration work involving sensors, electrical and mechanical components and peripherals.

o Develop software for system control, automation and IoT applications.

o Test, evaluate and commission IoT and Control Systems.

o Conduct regular project status meetings, providing updates to stakeholders and addressing any concerns or questions.

Team Management:

o Work in cross-functional project teams, assigning tasks, and ensuring effective collaboration.

o Provide guidance and support to team members, promoting a positive work environment.

o Facilitate communication and foster strong relationships with internal and external stakeholders.

Budget and Resource Management:

o Develop and manage project budgets, ensuring cost-effectiveness and efficient resource utilization.

o Identify resource requirements, allocate resources appropriately, and monitor resource utilization throughout the project lifecycle.

Be involved in field service activities and support field service department.

Provide front line support for key field service activities in line with customer requirements

Adapt to both on site and service center roles.

 Good interpersonal, Coordination and Communication Skills.

 Strong knowledge of project management methodologies and tools

 Strong programming skills in languages such as python, Java or C++, CodeSys. [preferred]

 Knowledge of robotics, PLCs (Programmable Logic Controllers), and control systems. [preferred]

 Keen interest in Sensors, IoT and Industrial Control Systems.

 Strong problem-solving and decision-making skills.

 Ability to manage multiple projects simultaneously, prioritize tasks, and meet deadlines

Good technical and analytical skills.

 Able to work in cleanroom

 Microsoft office knowledge.

 Able to work overtime on weekend/standby as required

Job Description

• Lead the process and mechanical team for process plant EPC project, including design, engineering, supporting procurement & installation, and testing & commissioning works
• Review tender specifications and meticulously evaluate vendor proposals for process mechanical equipment, propose suitable equipment brands for tender submission and procurement, prepare cost estimations for process mechanical work during the tender stage.
• Provide support during the procurement, contract negotiation, and progress claim processes throughout project execution.
• Lead testing and commissioning activities, ensuring the seamless transition to operational status.
• Plan and manage the process mechanical work schedule, and keep the Management Team informed of project progress, emerging issues, and resource requirements.
• Deliver technical presentations to clients and consultants, responding to their inquiries and comments in a professional manner.
• Manage the process mechanical suppliers and subcontractors according to establish schedule and quality requirement.

Requirements

• Minimum bachelor degree in Chemical/Environmental/Mechanical Engineering or Equivalent.
• Minimum 8 years’ proven experience in process/mechanical design of process plant (incineration plant, water/wastewater plant, etc.), at least 2 years’ experience in leadership or team lead role. Experience in the Flue Gas Desulphurization (FGD) wastewater treatment system is an advantage.
• In-depth knowledge of relevant industry standards and Singapore codes of practice.
• Exceptional problem-solving and troubleshooting skills, with a track record of resolving complex technical issues.
• Proficiency in using commonly used software applications such as MS Office.
• Familiarity with Naviswork and Bentley View Software for P&ID is considered an added advantage.
• Strong leadership abilities, including the capability to lead a team effectively.
• Excellent interpersonal and communication skills to facilitate technical discussions and collaborate effectively with individuals at all levels within the organization.

Responsibilities

• Verify and analyze hold lot rejects whether valid, invalid and escalate if in doubt or not meeting internal requirements
• Ensure smooth release of hold lots to meet shipment through verification, analysis and disposition
• Pre-alert, trigger and feedback hold lot or issues to upstream process for containments and/or action improvements
• Provide hold lot or low yield reports to engineering team for tracking, monitoring, continuous improvements and/or escalation
• Coordinate and follow up with cross functional team on incoming and Backend lot disposition to ensure shipment deliverables

Requirements

• Higher Nitec or Nitec in any Engineering field
• Minimum 3 years working experience preferred
• Able to work 12 hours shift (8 to 8)

Job Description

• Lead the process and mechanical team for process plant EPC project, including design, engineering, supporting procurement & installation, and testing & commissioning works
• Review tender specifications and meticulously evaluate vendor proposals for process mechanical equipment, propose suitable equipment brands for tender submission and procurement, prepare cost estimations for process mechanical work during the tender stage
• Provide support during the procurement, contract negotiation, and progress claim processes throughout project execution
• Lead testing and commissioning activities, ensuring the seamless transition to operational status
• Plan and manage the process mechanical work schedule, and keep the Management Team informed of project progress, emerging issues, and resource requirements
• Deliver technical presentations to clients and consultants, responding to their inquiries and comments in a professional manner
• Manage the process mechanical suppliers and subcontractors according to establish schedule and quality requirement

Requirements

• Minimum bachelor degree in Chemical/Environmental/Mechanical Engineering or Equivalent.
• Minimum 8 years’ proven experience in process/mechanical design of process plant (incineration plant, water/wastewater plant, etc.), at least 2 years’ experience in leadership or team lead role. Experience in the Flue Gas Desulphurization (FGD) wastewater treatment system is an advantage.
• In-depth knowledge of relevant industry standards and Singapore codes of practice.
• Exceptional problem-solving and troubleshooting skills, with a track record of resolving complex technical issues.
• Proficiency in using commonly used software applications such as MS Office.
• Familiarity with Naviswork and Bentley View Software for P&ID is considered an added advantage.
• Strong leadership abilities, including the capability to lead a team effectively.
• Excellent interpersonal and communication skills to facilitate technical discussions and collaborate effectively with individuals at all levels within the organization.

Responsibilities

1.      Develop, maintain, and optimize systems related to quantitative investment, including modules for strategy backtesting, live trading, and risk-control monitoring.

2.      Integrate withthe APIs of major cryptocurrency exchanges (Binance, OKX, Bybit, Coinbase,etc.) to implement market-data subscription, order management, account-data synchronization, and fund transfers.

3.      Integrate with brokerage account-opening and trading interfaces such as Longbridge, enabling onboarding-flow integration and connectivity for market-data and trading channels.

4.      Handle the localized deployment and adaptation of externally procured systems—covering environment setup, data migration, interface integration testing, and secondary development—to ensure stable production rollout.

5.      Participate in the design and implementation of Web3-related technical solutions, including on-chain data monitoring, smart-contract interaction, wallet integration, and DApp development.

6.      Write technical documentation, establish operations and maintenance standards, and continuously improve system performance and security.

Requirements

1.      Bachelor’s degree or above in Computer Science, Software Engineering, or a related field, with 3+years of development experience.

2.      Familiarity with quantitative-investment business logic, and an understanding of common quantitative-strategy frameworks and backtesting mechanisms.

3.      Proficiency in at least one mainstream programming language (Python / Go / C++ / Rust), with experience developing high-concurrency, low-latency systems.

4.      Familiarity with the Web3 technology stack and blockchain fundamentals, with hands-on on-chain interaction experience on major public chains such as Ethereum and Solana.

5.      Practical project experience integrating with major cryptocurrency exchanges via REST / WebSocket/ FIX APIs, and familiarity with signature authentication, rate-limiting, and exception-retry mechanisms.

6.      Experience integrating with account-opening, trading, and market-data interfaces of Longbridge or other brokerages, and familiarity with OAuth, KYC flows, and compliance requirements.

7.      Experience with localized deployment of externally procured systems; able to independently handle Linux server configuration, Docker / K8s containerized deployment, database migration, and middleware tuning.

8.      Knowledge of network security and data compliance, with basic system operations and troubleshooting capabilities.

Preferred Qualifications

•         Development experience at a quantitative hedge fund / private fund, brokerage, or on Web3projects.

•         Familiarity with DeFi protocols (Uniswap, Aave, Curve, etc.) and smart-contract development(Solidity / Rust).

•         Experience developing low-latency trading systems, high-frequency trading (HFT) systems, or market-data gateways.

•         Relevant certifications in finance or blockchain (e.g., CFA, blockchain engineer certifications).

What We Offer

•         Monthly salary ofS$5,000–S$8,000, plus performance-based incentives.

•         Deep, hands-on opportunities at the cutting edge of the finance + Web3 intersection.

•         A flat organizational structure that is technology-driven and results-oriented.

•         A well-defined career-advancement path with ongoing learning support.

Key Responsibilities

• Expected to take accountability of assigned project scope of work and timelines.

• May work from limited or no documentation

• Perform tool build, integration, testing and troubleshooting to start-up new tools. 

• Perform Planning, communicating, and coordinating support plans between stakeholders

• Perform periodic diagnostic testing and necessary preventative maintenance to ensure tool productivity and quality performance. 

• Able to work with Clean Room Facilities stakeholders to specify tool facilities requirements to meet needs of the tool.

• Able to work with the facilities group to manage & troubleshoot any facilities related issues

• Applies diagnostic techniques and use of documentation and test equipment. Define & execute Qualification plans.

• Able to perform routine preventive maintenance within established timeframes.  

• Participate in projects to improve productivity, maintenance downtime, costs reduction and uptime improvement.

• Uses training and experience to identify process, software or hardware related system problems.

• Strives to perform BKM’s. Uses knowledge management systems.  Follows all IP guidelines.

• Assumes responsibility for complete customer satisfaction within work area

• Comply with all safety procedures and consistently demonstrates safety as a value

Requirements

• Prior Experience in ALD Process tools is preferred 

• Prior experience in Cleanroom Facilities VMB & Ampoule Set-up is preferred.

• Prior hands-on experiences in Wafer Fabrication Semiconductor tools

• Relevant education qualification in Engineering

• Ability to work with deadlines and with all levels of stakeholders

• Ability to work in cleanroom work environment

• Expected to work shifts and weekends (Rostered) 

Work Location

• Fusionopolis (One North)

The Opportunity

• Opportunity to work in a top government R&D agency in Singapore
• Working hours: 9am-9pm, 4334 shift cycle (Sun-Wed/Wed-Sun)
• Location: Nearest MRT Kent Ridge
• 12 months (convertible based on performance)
• Salary up to $3.5k!
• Training is provided!

Job Scope

• Operate semiconductor tools for wafer processing, measurement, and inspection
• Monitor tool/process status and perform basic fault recovery
• Execute process flows and coordinate tool usage; collect operational data
• Handle and transport wafer lots within cleanroom environments
• Support improvements, chemical handling (supervised), and strict EHS compliance

Requirements

• Minimum NITEC / Higher NITEC / Diploma in a relevant engineering field
• Experience in semiconductor equipment operation and basic troubleshooting is an advantage
• Exposure to assembly, build, testing, or preventive maintenance is a plus
• Able to work independently and in a team

Next Step

Prepare your updated resume, send to the following email: eugene.chia@adecco.com

*Only shortlisted candidates will be contacted*

Eugene Chia

Direct Line: 6697 7809

EA License No: 91C2918

Personnel Registration Number: R24124644

• MNC (Woodlands)

• Company Transport Provided

• Basic: $3500 to $5000 + AWS + VB

• Excellent Benefits + Career Progression

• Process Manufacturing Plant
  

Job Responsibilities:

• Plan and execute preventive and predictive maintenance programs for plant machinery, rotating equipment, and utilities systems

• Monitor equipment performance and support reliability improvement initiatives to minimize unplanned downtime

• Troubleshoot and perform root cause analysis for equipment failures and implement corrective actions

• Coordinate maintenance schedules with production and operations teams to ensure smooth plant operations

• Support maintenance activities for pumps, motors, conveyors, compressors, heat exchangers, boilers, steam systems, and other plant utilities

• Maintain maintenance records, equipment history, and spare parts inventory through CMMS system

• Support plant shutdown, equipment overhaul, and continuous improvement projects

• Ensure maintenance activities comply with workplace safety, GMP, HACCP, and plant operational requirements
  

Requirements:

• Degree / Diploma in Mechanical, Electrical, Mechatronics, or related Engineering discipline

• Minimum 2–5 years of maintenance experience in edible oil, food manufacturing, FMCG, chemical, refinery, or process plant environment

• Hands-on experience with rotating equipment, pumps, motors, compressors, and utilities systems

• Familiar with preventive maintenance, predictive maintenance, troubleshooting, and CMMS systems
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Special Process (Thermal Spray)

We are part of a leading aerospace and industrial engineering environment specialising in advanced component repair and surface engineering solutions. Our focus is on high-precision thermal spray technologies used in gas turbine and aero-derivative engine maintenance.

• S$3,500 + AWS (1 month) + Variable Bonus (up to 2.5 months)

• Transport provided for convenience

• Attractive night shift allowance of $14 per night

• Annual Flexible Benefits of $500

• Pioneer, Singapore

• Rotating shift (every 2 weeks):

  • 7:30AM – 7:30PM (Day Shift)

  • 7:30PM – 7:30AM (Night Shift)

• Work pattern: 4 days on, 2 days off

Job Responsibilities

As a Special Process (Thermal Spray) Technician, you will be responsible for performing precision coating and surface treatment processes for high-performance engine components.

Your responsibilities include:

• Performing thermal spray and/or GEL coating for gas turbine and aero-derivative engine repair

• Carrying out blasting, polishing, heat treatment, and other related surface preparation processes

• Following work instructions to ensure accurate and consistent task execution

• Maintaining product quality, equipment care, and production output targets

• Ensuring proper housekeeping and adherence to production schedules

• Complying strictly with all EHS (Environmental, Health & Safety) regulations

• Reporting any unsafe conditions or practices immediately

• Supporting other duties as assigned

Requirements

• 3 years of relevant working experience

• Able and willing to work rotating shifts (day and night)

• Ability to follow structured work instructions and production processes

Job Description

• Oversee the planning and all project operations.
• Manage the progress of the project and ensures quality and timely delivery.
• Coordinate with relevant parties to manage progress of the project to make sure that the schedule is kept.
• Lead team to manage project operations, schedule, and specifications.
• Manage operational cost to keep cost within the budget.
• Manage site document filing and record keeping in accordance with International Organisation for Standardisation (ISO) standards.
• Manage subcontractors’ activities to ensure compliance of contract requirements.
• Monitor compliance of work with the workplace safety and health regulations.
• Monitor quality of project delivery to make sure they meet project requirements and regulations.
• Oversee the project team and subcontractors in delivery of project to meet completion date.
• Provide leadership to the project management and construction team.
• Supervise daily site activities.

Requirements

• Degree in Civil / Mechanical Engineering (Degree must be recognized by the Professional Engineers Board, Singapore).
• At least 10 years of relevant experience in managing construction projects for water treatment facility or process plant.
• Professional project management certification (eg. PMP, CITPM, etc) is preferred.
• Willingness to travel to project sites.
• Good communication skills to liaise with the various stakeholders.
• Hands-on attitude, meticulous and analytical with excellent problem-solving skills.
• Team player with good interpersonal and communication skills.
• Able to work under pressure, resourceful and independent with good negotiation skills.
• Able to work under tight deadlines.

• Well Established Company

• 1-Year Contract (Renewable / Potential Conversion to Permanent)

• Basic $6000 to $8000 + Completion Bonus

• Working location: Boon Lay

• Working day: Monday to Friday

• Working hours: 8.30am to 5.30pm
  

Job Responsibilities:

ERP System Implementation

• Coordinate and support the implementation of Microsoft Dynamics 365 Business Central (ERP).

• Work closely with business users, project teams, and external ERP vendors throughout the project lifecycle.

• Gather and document business requirements from various departments.

• Coordinate system testing, user acceptance testing (UAT), training, and go-live activities.

• Monitor project progress, timelines, risks, and deliverables.

Process Improvement

• Review existing operational and manufacturing processes to identify areas for improvement.

• Support inventory management and inventory costing enhancement initiatives.

• Drive continuous improvement projects to improve efficiency, productivity, and process effectiveness.

• Recommend and implement practical solutions to operational challenges.

Project Coordination & Stakeholder Management

• Coordinate project activities across Manufacturing, Operations, Supply Chain, Warehouse, Finance, and IT teams.

• Facilitate project meetings and follow up on action items.

• Communicate project updates and escalate issues when necessary.

• Ensure project milestones and objectives are achieved within agreed timelines.
  

Job Requirements:

• Degree or Diploma in Engineering, Manufacturing, Business, Supply Chain, Information Systems, or related disciplines.

• 3–5 years of project management, process improvement, or ERP project experience.

• Experience participating in or supporting ERP implementation projects is required.

• Exposure to Microsoft Dynamics 365 Business Central, Dynamics NAV, SAP, Oracle, NetSuite, or similar ERP systems is preferred.

• Manufacturing industry experience is essential.

• Experience in inventory management, production planning, warehouse operations, or inventory costing will be advantageous.

• Knowledge of Lean Manufacturing, Lean Six Sigma, or Continuous Improvement methodologies is preferred.
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

API Pharmatechnologist | 1-Year Contract (Extendable)

• Well Established Company
• Basic $6000 - $8000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• One Year Renewable Contract

Job Responsibilities:

PROJECT MANAGEMENT:

• Plan, organize, and oversee investment and process improvement projects from initiation to completion.
• Develop detailed project plans, schedules, budgets, and resource allocations.
• Monitor project progress, manage risks, and ensure deliverables align with business objectives.
• Prepare and deliver status reports, project documentation, and presentations to stakeholders and senior management.

PROCESS IMPROVEMENT & OPERATIONAL EXCELLENCE:

• Analyze current investment and operational processes to identify inefficiencies, bottlenecks, and areas for optimization.
• Design and implement streamlined processes, tools, and methodologies to improve accuracy, productivity, and compliance.
• Apply Lean, Six Sigma, or other continuous improvement frameworks to drive measurable performance enhancements.
• Track and measure process improvements, ensuring sustainable implementation.

STAKEHOLDER MANAGEMENT:

• Collaborate with internal teams (Finance, Operations, Compliance, Technology) to align project goals with organizational strategy.
• Communicate project objectives, timelines, and progress clearly across all levels of the organization.
• Manage relationships with external partners, vendors, and consultants as required.

DATA & FINANCIAL ANALYSIS:

• Support investment analysis, feasibility assessments, and ROI evaluations.
• Use data-driven insights to guide decision-making and project prioritization.
• Prepare financial models and business cases for investment initiatives.

Job Requirements:

• Bachelor’s Degree in Business Administration, Finance, Engineering, or related field.
• Project Management Professional (PMP), PRINCE2, or Lean Six Sigma certification strongly preferred.
• 5+ years of experience in project management, preferably within investment, finance, or process improvement functions.
• Experience with process optimization, business transformation, or continuous improvement initiatives.
• Proficient in project management tools (e.g., MS Project, Asana, Jira, Smartsheet) and Excel

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

We are seeking a talented and self-motivated Scientist, the successful candidate will join the Advanced Process Modules (APM) team at IME, develop specialty technologies for CMP process.

Key Roles and Responsibilities

1. Develop CMP process for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications to enable process and/or product realization.
2. Provide technical leadership in collaboration with process development, optimization, and troubleshooting for both industrial and grant-funded projects.
3. Own innovation strategy for CMP raw materials, slurry, methodologies, and approaches to enhance CMP uniformity, stability and defect performance.
4. Prepare and deliver technical reports and presentations for both internal stakeholders and external customers, effectively communicating project progress and technical insights.
5. File patents and know-hows for new development activities.
6. Publish research findings in leading journals and conferences

Job Requirements

1. Ph.D degree in Electronics, Microelectronics, Materials Engineering, Mechanical Engineering, Chemical Engineering, Materials Science, Chemistry, Physics, or equivalent.
2. Minimum 2 years of relevant working experiences in R&D and/or semiconductor industry, preferably in CMP technologies.
3. Hands-on experience with 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara) is highly desirable.
4. Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor platforms is advantageous.
5. Hands-on experience with basic process characterization techniques such as SEM, Ellipsometry, and AFM is a plus.
6. Strong skills in experimental design (DOE), data analysis, and process optimization.
7. Good analytical and communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
8. Self-motivated with a strong interest in advancing next-generation CMP applications and industry trends.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.