Total 21,786 Others process development engineer job vacancies in The Philippines

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Role purpose

Designs the ITSM process workflows that support delivery of stable EUX operations — Incident, Problem, Change and Release Management aligned to Customer's operational governance standards.

Key responsibilities

• Author detailed process workflows for Incident, Problem, Change and Release across the in-scope EUX services.

• Document runbooks, escalation matrices and operational handover artefacts.

• Partner with Customer ITSM owners to align workflows to existing tooling and governance.

• Validate workflows during pilot and refine based on operational telemetry.

Required experience and qualifications

• 5+ years designing ITSM processes for enterprise organisations.

• ServiceNow process design experience is a plus.

• Demonstrable delivery of process design on at least one regulated-industry transformation.

• Demonstrable delivery experience in a regulated industry — financial services, government, pharmaceuticals, energy or similar — including familiarity with change control, audit and compliance constraints.

• Experience working in a large, geographically distributed global organisation, comfortable operating across multiple time zones and cultural contexts.

• Experience working within a globally distributed team, collaborating effectively across multiple time zones and cultural contexts.

• Excellent written and verbal communication skills; able to engage with senior stakeholders and translate technical detail for non-technical audiences.

• Comfortable working in a hybrid client/partner team with clear ownership boundaries.

Technical skills

• ITSM design — Incident, Problem, Change, Release, Demand & Capacity, Financial Controls.

• Service Transition planning aligned to Customer operational governance and tooling.

• Process workflow design and runbook authoring.

• Target-state operations model definition and BAU handover.

Desirable

• Banking or finance experience.

• Experience in role, delivering complex, global End User transformation in a regulated industry.

• ITIL v4 Foundation (Managing Professional is a plus) or equivalent service-management certification.

Responsibilities:

• Improve and sustain processes to meet operational goals
• Monitor and control process performance indices
• Ensure quality targets at all critical nodes
• Use quality tools to enhance processes
• Resolve out-of-control issues and determine lot disposition for out-of-spec cases
• Troubleshoot process issues, establish CAS and specs and collaborate on recipe creation
• Oversee SPSR, MRB, TECN status and follow-ups
• Partner with equipment and manufacturing engineers to achieve module goals
• Work with internal/external customers to boost yield and quality
• Drive productivity via process changes, capability documentation, and equipment optimization
• Characterize and develop new equipment processes
• Organize training to upskill AEs/Technicians

Requirements:

• Master or Degree in Electrical, Electronics, Mechanical, Chemical Engineering or Honors in Physics/Chemistry
• 4–8 years of working experience related to Section Head role, preferably in a manufacturing environment
• Technical understanding of manufacturing processes, equipment, and automation systems
• Strong interpersonal, teamwork and analytical skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to engg1@talenttradersg.com

EA License No: 13C6305

Reg. No.: R24121656 (CHEN JING WEI)

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work (Day or Night shift)

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume via email to hr@tempserv.com.sg

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Process Engineer (CNC Machining) - Milling/Turning/EDM/Lathes

• Up till $6500 Basic + AWS + Variable Bonus
• Monday-Friday, 7.30am-5pm
• Location: Pioneer (transport provided)
• 3 years of experience in CNC machining or related processes

RESPONSIBILITIES:

• The Process Engineer (Machining) will be responsible for industrializing machining processes (includes CNC mill/turn, EDM, lathes) for gas turbine component repairs.

• This role includes the implementation and qualification of new equipment and technologies, as well as driving continuous process improvement initiatives.

• Industrialize machining processes for new and existing products - Qualify CNC milling/turning, EDM, lathes, and other machining processes to ensure they meet specifications and quality standards.

• Collaborate with cross-functional teams to optimize machining processes for manufacturability and cost-effectiveness.

• Ensure all machining processes adhere to Safety, Quality, Delivery, and Cost (SQDC) standards.

• Monitor and report on key performance indicators (KPIs) related to machining processes.

• Implement corrective actions to address any deviations from SQDC standards.

• Lead risk reduction and quality improvement projects to enhance machining processes.

• Drive productivity and sustainability projects to reduce waste and improve efficiency.

• Utilize Root Cause Analysis (RCA) tools and methodologies to solve complex problems.

• Provide technical guidance, training and support to machining operators and technicians.
  

REQUIREMENTS:

• Bachelor degree in Mechanical Engineering from a recognized university.

• 3 years of experience in CNC machining or related processes

• Knowledge of gas turbine component repair is advantageous.

• Familiarity with tooling selection, fixture design, CAD, CAM, and metrology.

• Proficiency in reading and interpreting engineering drawings and specifications.

Job Summary

The ideal candidate will lead Topsides Process Engineering for FPSO, FLNG, or offshore projects, providing strategic focus across Conceptual, pre-FEED, FEED, and EPC(I) phases with hands-on engineering expertise and leadership in offshore oil and gas.

Responsibilities

• Lead development and continuous improvement of corporate technical standards, procedures, workflows, and engineering platforms to ensure practical, fit-for-purpose solutions incorporating project lessons learned
• Manage topside process engineering resources by monitoring project progress and assigning competent personnel aligned with project needs in close collaboration with Project Management Teams
• Maintain and disseminate the Lessons Learned database for project execution and operations to enable preventive and mitigative actions and promote design standardization
• Serve as Project Discipline Lead for Topsides Process, applying hands-on engineering expertise to guide project execution and technical decisions
• Report regularly to Head of Process Discipline on project concerns, resource planning, progress updates, and forecasts, participating in corporate meetings
• Provide technical guidance and career development opportunities for engineers and designers, facilitating access to international conferences and training
• Support Hanwha Ocean engineering teams across global locations including India, Seoul, and Houston for offshore project phases from Conceptual to FEED
• Travel internationally as required to support project and team needs

Required competencies and certifications

• Bachelor’s or Master’s degree in Petroleum or Chemical Engineering
• Proven hands-on process engineering experience in FPSO or offshore EPCI projects, including process simulation (steady state, dynamic), HB/MB, utility consumption, blowdown/flarenet studies, hydraulic and equipment sizing, control narrative, HAZOP, and technical safety action close-out
• Experience leading FPSO FEED/EPCI projects as Project Lead for Topsides Process, covering Conceptual and Feasibility Studies
• Experience managing topside process engineering resources and project progress in offshore or onshore oil and gas industry projects
• Proficiency with process engineering tools such as Aspen HYSYS, Flarenet, Pipe-net, or equivalents, with ability to interpret simulation results
• Extensive knowledge of process engineering principles, industry codes, standards, and scientific problem-solving methods
• Strong analytical and problem-solving skills applied to engineering challenges
• Effective communication skills in English, both oral and written, to collaborate with multidisciplinary teams, vendors, and clients
• Ability to work independently and collaboratively with strong attention to detail and accuracy

Preferred competencies and qualifications

• Experience in Field Engineering during construction or onshore/offshore commissioning phases
• Familiarity with zero carbon emission technologies and CCUS (Carbon Capture, Utilization, and Storage) technologies

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Responsibilities :

• Support equipment development activities for new or enhanced semiconductor tools and subsystems
• Assist with tool characterization, engineering experiments, and data collection during development or early deployment phases
• Analyze equipment data to support capability assessments, design learning, and risk reduction
• Support documentation of equipment requirements, engineering changes, lessons learned, and development reports
• Participate in tool build, installation, upgrade, and qualification activities from a development perspective
• Collaborate with vendors, manufacturing, process engineering, and facilities teams under engineer supervision
• Prepare technical summaries and presentations for development reviews and project achievements
• Adhere to all safety, environmental, and cleanroom requirements

• Maintain and publish roadmaps to define work/CIP’s required to move toolsets from one EMI level to the next in preparation for transfer to HVM.


Requirements :

• Bachelor’s or Master’s Degree or PhD in Mechanical, Chemical, Electrical/Electronic Engineering

• Understanding of Physical Vapour Deposition (PVD) or Chemical Vapour Deposition (CVD) equipment operation, working principles, fixing, and tool installation procedures

• Exposure to R&D PCVD equipment transfer and the ability to develop/optimize equipment hardware design

• Exposure to PCVD pump/abatement/chiller selection and ability to develop/optimize equipment hardware design is preferred

• Remarkable oral and written communication skills, demonstrating the ability to express messages clearly and effectively on a local and global scale.

• Shown ability to prioritize and handle numerous projects simultaneously, efficiently applying available resources or seeking peers’ and/or management help to drive solutions.
  

  Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenan

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• In charge of establishing the process and work in the team to implement risk management best practices in projects
• Implement and maintain the office's ISO 13485 and IEC 62304 compliant quality management system processes and procedures across departmental work and projects.
• Responsible in providing guidance and development support to the projects handled
• Taking charge of validating and advising project teams on regulatory, quality and risk requirements
• In charge of implementing and maintaining ISO 13485 and IEC 62304-compliant quality management system processes and procedures
• Responsible in
• In charge of managing project tasks which includes ensuring of timely completion of project milestones and meeting KPIs
• In charge of compliance with quality, regulatory and organisational policies and systems while supporting required record-keeping and documentation.

Requirements:

• Min Degree in Engineering /Science or relevant
• Min 2 years of working experience in QMS, Risk Management and design & development in medical industry
• Experience in ISO13485 /IEC62304 audit is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

We are seeking an experienced Software Development Engineer in Test (SDET) / QA Automation Engineer with strong expertise in designing, developing, and maintaining scalable automation frameworks. The ideal candidate will have a solid background in automated testing, CI/CD integration, API testing, and test framework development, ensuring high-quality software delivery across web and API platforms. 

• Design, develop, and maintain robust automation testing frameworks from scratch.  

• Build and execute automated test suites for web applications, APIs, and microservices.  

• Integrate automated tests into CI/CD pipelines to enable continuous testing and faster releases.  

• Develop reusable test components, utilities, and libraries to improve automation efficiency.  

• Collaborate with developers, product owners, and QA teams to define test strategies and acceptance criteria.  

• Perform functional, regression, integration, and end-to-end testing.  

• Analyze test results, identify defects, and work closely with development teams for resolution.  

• Improve test coverage, reliability, and execution performance across applications.  

• Participate in code reviews and contribute to quality engineering best practices. 

• Strong experience as an SDET, QA Automation Engineer, or Test Automation Engineer.  

• Expertise in designing, developing and maintaining automation frameworks.  

• Hands-on experience with: Playwright ,Selenium ,Cypress ,Puppeteer  

TestCafe  

• Strong programming skills in: Java,JavaScript / TypeScript, Python  

• Experience with testing frameworks: JUnit ,TestNG ,PyTest ,Unittest  

Jest ,Mocha  

• Good API automation testing experience using: Postman/Newman  

Karate DSL, Java-based API Automation, SOAP UI / ReadyAPI  

• Experience testing: REST APIs ,SOAP Web Services  

• Strong understanding of: CI/CD pipelines ,Continuous Testing ,TestAutomation Best Practices ,Agile/Scrum methodologies  

Preferred Skills 

• Experience with Jenkins, GitHub Actions, GitLab CI, Azure DevOps, or similar CI/CD tools.  

• Exposure to Docker and Kubernetes environments.  

• Experience with cloud platforms such as AWS, Azure, or GCP.  

• Knowledge of performance and load testing tools. 

THE ROLE:

As a senior staff member of the product characterization team, you will evaluate the performance of AMD AECG products, develop, lead and characterize the next generation Memory Controller IPs.

THE PERSON:

• Strongly motivated individual from post-silicon validation background.
• Excellent communication and presentation skills, demonstrated through technical publications, presentations, training, executive briefings, etc.
• Adept at collaboration and mentorship skills to train and guide fellow engineers and elevate the skills of the team around you.

KEY RESPONSIBILITIES:

• Gain expertise into the AMD SoC architecture to characterize next generation Memory Subsystem (Controller, PHY and IO) for various supported protocols such as DDR4, LPDDR4, DDR5, LPDDR5, DDR6 and LPDDR6.
• Understand Pattern development nuances and guide the team for bench data collection and debug with lab instruments when necessary.
• Work closely with cross functional teams from design and firmware side to identify key new features, firmware stability and ensure proper test coverage for the same.
• Drive continuous improvement initiatives on automated test scripts and test frameworks for efficient data collection, test-time optimization and data analysis.
• Stay updated with the latest developments in Memory specifications and trends to inform product strategy and direction
• Statistical data analysis to post process volume results for data correlation across Process corners and outlier analysis.
• Responsible for isolating the issue to a specific area such as test gaps, SW bug, silicon bug, or process deviation using bench setup and instill good debug practices in the team.
• Drive cross-functional discussions to address the issues uncovered from debugs and collaborate for ensuring screens are in-place for gaps identified.

PREFERRED EXPERIENCE:

• Extensive years of experience into post-silicon validation with strong background on SoC validation and system level testing.
• Technical leadership experience leading a small group of senior engineers.
• Strong understanding of ARM SoC architecture and Memory protocols such as DDR5 and LPDDR5.
• Experienced on bench testing and debug skills with lab instruments usage.
• Proficiency in using test equipment such as oscilloscopes, logic analyzers and protocol analyzers.
• Experienced in Linux environment, data analysis and scripting languages (e.g. Python, Perl) for automation and data processing.
• Strong communication and leadership skills, including data presentation and ability to work well in a group environment that spans across continents.
• Experience with AMD/Xilinx Vivado and FPGA design flow is a plus.

ACADEMIC CREDENTIALS:

• BS in EE, CS, ECE or related field; MS preferred.

Position Summary

The Engineer, Product Development (Fresh Grad) is responsible for the developmentand establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issues and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
• Any other ad-hoc duties as assigned.

Requirements

• At least a Bachelor’s Degree in Materials Science, Microelectronics, Electrical or Chemical engineering.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in DOE, FMEA, and 8D reports.
• Prior experience in the semiconductor industry would be an added advantage.