Total 2,451 Senior Executive automation engineer job vacancies in The Philippines

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Diffusion (Wet) Department diverse team of talent.

What you will be working on:

• To sustain and improve all equipment performance indices to meet operations goals

• Perform shift duties based on rotation systems to support production
• Optimize equipment uptime/ reliability thru scheduled & recovery maintenance. 
• Control equipment performance indices to meet BBS goals
• Comply to ISO standards and Quality systems of the company
• Forecast/ establish stock levels of spares and consumables to meet manufacturing capacity within allocated budget
• Establish and maintain preventive maintenance OI to standardize equipment practice
• Train/ mentor AEs to through OJT and continually upgrade their technical skills to cope with technological changes
• Recommend improvement to enhance capabilities, reliabilities or cost saving
• Participate in CIT team/ task force to optimize equipment performance and COO
• Start-up new equipment to support production ramp, from facilities hook-up, vendor start-up, to acceptance of equipment.
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Ensure good housekeeping and safety practices in the work area.

More about you:

• Degree in Electrical/Electronics/Mechanical Engineering Diploma in Mechatronics/ Electronics/ Mechanical Engineering with at least 4 years semiconductor equipment maintenance experience.
• 1-3 years relevant experience innthe semiconductor manufacturing environment. Fresh Degree holders are welcome to apply.
• High Vacuum maintenance experience
• Basic semiconductor wafer fabrication equipment/ process knowledge
• Able to interpret electrical/ pneumatic schematic drawings
• Team Player
• Possess a strong sense of responsibility

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

We are seeking a highly skilled and experienced SeniorSoftware Engineer to join our dynamic team. The ideal candidate will have over 10years of hands-on experience in software development, with strong expertise in.NET, Python, and cloud technologies. You will be responsible for designing,developing, and maintaining enterprise-grade applications, collaborating withcross-functional teams, and ensuring high performance and scalability ofsolutions

Key Responsibilities:

·      Execute projects and enhancements and providetechnical support in the area of inhouse reporting.

·      Work includes analyzing user requirements anddesign/development of reports

·      Work will also include some automation usingUnix scripts, SQL/Python and some development of interfaces between inhouseapplication and other back-office application systems.

·      Responsible for manage, analyse, develop andautomate software projects for functional requirements and creation ofautomation plans and test scripts.

·      Be part of the DevOps team, will identify,analyze and automate manual tasks and issue fixes

·      Supporting Production Application that isdevelop by team

·      Responsible for Improve & ManagingDeployment Pipeline, exposure to DevOps environment and tools like Git, Jenkinsand JIRA, Confluence

·      Actively participate in inception, dailystand-ups and retrospective meeting & represent testing

·      Collaborate within the team, working in pairswith programmers and other team members

·      Able to quick learn and take on tools ortechnologies

Requirements

·       10years or above of software and development experience

·       BachelorDegree in Computer Science OR information technology OR Science (ComputerStudies)

·       Proventrack record of participating in the design and delivery of applicationsolutions

·       Musthave work experience in Agile environment is an added advantage; A good teamplayer; ability to work on minimal supervision

·       Strongtechnical skills in Microsoft and .NET technologies are essential.

·       Handson programming experience with C#/VB.NET programming, .Net Core 1.0-2.2, MS SQLServer and writing stored procedures, VBA programming, web services, ASP.NET,Web API, Windows Services, -Python programming, XML, Json, batch scripts

Preferredif have experience handling L2 or L3 support on production application

- Experience on developing service-based applications Knowledge in any of thebanking areas is an added advantage

- Experience with Agile & Testing Tools like HPALM, JIRA, Confluence wouldbe an advantage

- Fluency in written and spoken English, excellent communication andinterpersonal skills

EA License No.: 96C4864

Reg No.: R25128798 HUANG QIMENG

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Product Engineering Department diverse team of talent.

What you will be working on:

• Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.
• Identify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.
• Technical interface with Business Lines/customers
• Driver for yield improvement
• Resolve product yield, quality and reliability issues
• Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.
• Work with Customers/Mother Fab on the DfM related issue.
• Conduct product yield analyses to identify root cause of wafer sort and final test failures
• Set up fault diagnostic capabilities for yield improvement
• Work with Business line/customers on product low yield disposition
• Perform electrical and physical failure analysis to isolate fail location
• Drive the yield improvement task force

More about you:

• Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics
• 2 – 8 years product and/or test engineering, failure analysis or process-integration experience
• Experience in Fab process, yield engineering or design will be an added advantage
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical & problem-solving skills
• Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• To report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• To assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• To prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• To liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
• To attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule.
• To establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Any other duties that may be assigned from time to time.

Requirements

• Degree in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Good Time management and organization skills;
• Good interpersonal and communication skill;
• Able to multitask;
• Able to work under fast paced environment;
• Working at Changi Airport site office.

Key Responsibilities

• Provide Level 2/3 support for network infrastructure across data centers, remote branches, and overseas locations.
• Install, configure, and troubleshoot Cisco routers, switches (Nexus, 2960, 3750), and firewalls (Checkpoint, Juniper).
• Manage and support routing protocols including RIP, EIGRP, OSPF, BGP, and HSRP.
• Perform network health checks, DR drills, and ISDN testing for business continuity.
• Coordinate with vendors for SSOE deployments, hardware replacements, and RMA processes.
• Monitor and maintain WAN links using tools like SolarWinds, NetBrain, Riverbed, Algosec, and IBM ISM Service Desk.
• Support and troubleshoot VPNs, VLANs, and public cloud connectivity.
• Generate and maintain documentation for network changes, incident reports, and monthly performance metrics.
• Collaborate with cross-functional teams to resolve network-related issues and implement infrastructure upgrades.
• Ensure compliance with SLA and IT security policies.

Technical Skills & Tools:

• Networking: Cisco (CCNP certified), Nexus, RIP, EIGRP, OSPF, BGP, HSRP, STP, VLAN, VPN
• Firewalls: Checkpoint, Juniper
• Servers: Windows Server 2008/2003, Active Directory, FTP, DNS, DHCP, Backup Server
• Monitoring & Ticketing Tools: SolarWinds, NetBrain, Riverbed, IBM ISM, Ichamp, JIRA, CA Spectrum
• Others: Lotus Notes, Blackberry configuration, SSL VPN, Symantec Endpoint Antivirus

Required Skills & Experience:

·      Bachelor Degree in relevant field (e.g.,Computer Science, Information Technology, Engineering).

·      10+ years of experience

·      Willingness to participate in 24x7 supportrotations and on-site activities.

·      Excellent communication and documentationabilities.

·      Strong analytical and troubleshooting skills.

EA License No.: 96C4864

Reg No.: R25128798 HUANG QIMENG

Roles and Responsibilities:

•  Ensure timely submission of process deliverables, including PFDs, P&IDs, hydraulic profiles, equipment sizing, HAZOP study reports, etc

•  Lead in the P&ID (Piping and Instrumentation Diagrams) drawings submissions utilizing Bentley OPPID, PFD (Process Flow Diagrams), and mass balance calculations

•  Lead in RO Membrane design selection and process.

·   Participate and coordinate in HAZOP (Hazard and Operability) studies for the overall plant and its systems/sub-systems.

•  Integrate equipment and material capabilities to meet process module and technology specifications.

•  Taking the lead in discussion with clients on planning and execution of the testing and commissioning for successful project completion.

•   Analyze and review current processes to streamline them for improvement, productivity enhancement, sequence optimization, unit improvement, and troubleshooting of the plant during testing and commissioning.

•   Attend technical meetings with clients, vendors, sub-contractors, and internal project teams.

•  Collaborate with various disciplines engineers to ensure all interfacing issues are aligned and resolved to mitigate engineering rework.

·   Any other ad-hoc engineering duties to support the Project Manager for successful execution of the project.

Responsibilities

• Administer customer & project supplier databases

• Prepare & print proposal logs & reports

• Coordinate project supplier evaluation & selection sessions

• Provide support to source, qualify and negotiate with suppliers to fulfill proposal and project requirements

• Support project implementation through management of engineering procurement activities

• Manage project supplier relations and ensure that supplier base is adequate and competitive

• Analyze and identify specification and engineering requirements of enquiries & prepare proposals to customers.

Requirements

• Bachelor Degree or Diploma in Electrical/Electronics/Control & Instrumentation

• 2 ~ 5 years relevant experience or SCADA/PLC project experience.

• Familiar with PLC/DCS/HMI and process automation in general

• Proficient in preparing technical proposals & quotations

• Able to work under pressure and meet tight deadlines

• Good working knowledge of MS Office

• Good knowledge of standard conditions of contracts for engineering project

• PRs/Singaporean Only

Note: More experienced candidates will considered for Senior/Lead position.

We are looking for Infrastructure Engineer responsible for building, operating, and improving reliable, scalable, and high-performing production systems. This role combines infrastructure engineering expertise with SRE practices, focusing on system availability, automation, incident management, and continuous improvement.

Key Responsibilities:
• Manage high severity incidents and high customer impact incidents focusing on fast recovery
• Champions production resilience and availability, focusing on superior client experience, by working with the operation team and technology development teams
• Drive the implementation of Site Reliability Engineer (SRE) and Chaos Engineering design for all strategic systems
• Drive effective communication between business and technology with regards to production service reliability and performance
• Drive continuous improvements in processes or systems leveraging Site Reliability Engineering methods
• Respond to, evaluate and analyse production incidents to minimise their impact as well as devise innovative solutions to prevent them in the future
• Improve the reliability and availability of systems by gathering hard data, designing systems for increased service reliability and performance
• Provide expert advice and training to our engineers as to which technology solutions and advanced reliability techniques to use on each situation

Requirements:
• Bachelor's degree in Computer Science or related field
• 10+ years of relevant experience
• Experience driving major production incidents and organise incident retrospective meetings
• Experience with Core Java 8, Cloud Foundry and non-relational databases, and Linux, Unix systems
• Experience with high availability, high-scale, and performant systems
• Experience with python and Unix scripting

EA License No.: 96C4864

Reg No.: R25128798 HUANG QIMENG

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborate with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks as assigned to support project and team objectives

Requirement

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Responsibilities:

• In charge of managing and supporting planning and procurement of medical, non-medical equipment, and furniture
• Plan and lead user workgroups by organising regular meeting sessions, setting goals and targets, facilitating useful and productive discussions, guiding user departments, as well as reviewing performance indicators and work plans
• Responsible for budgetary planning and control, ensuring that the development keeps within budget
• Work closely with user department and various stakeholders in the preparation of medical, non-medical equipment and furniture specifications for tenders
  Provide recommendation to users based on technical compliance of medical, non-medical equipment and furniture in tender submissions
• Attach to Group team to familiarise with Group BME policies and procedures through supporting the daily operations to align with organisation and regulatory requirements
• Liaise and manage external contractors on service and tender commitment issues Provide technical advisory to end users and senior management on medical, non-medical equipment and furniture related issues
• Perform any other duties as assigned

Requirements

• Min Diploma in Electronics or relevant Engineering
• Min 5 years of experience in service and maintenance of medical equipment.
• Experience in Healthcare/Hospitals

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Summary

The Senior Engineer (CSA – Civil/Structural/Architectural) will oversee technical aspects of the construction project, ensuring quality, compliance, and efficient execution. The role involves coordinating with design teams, supervising site works, and supporting project management in decision-making, planning, and problem resolution

Key Responsibilities

• Review and interpret design drawings, specifications, and construction documentation.
• Coordinate with architects, structural and MEP engineers, and consultants to resolve design and technical issues.
• Supervise and monitor site activities to ensure compliance with project specifications, quality standards, and safety requirements.
• Assist in construction sequencing, method statements, and temporary works planning.
• Conduct site inspections, quality audits, and progress monitoring; report findings to management.
• Support cost control by reviewing material usage, workmanship, and variation claims.
• Mentor and guide junior engineers and site staff to ensure smooth project execution.
• Attend project meetings and provide technical inputs for problem-solving and decision-making.

Qualifications & Experience

• Bachelor’s degree in Civil Engineering, Structural Engineering, or Architecture.
• Minimum 5–8 years of experience in construction projects (high-rise, infrastructure, or industrial projects preferred).
• Strong knowledge of construction methods, materials, and codes/regulations.
• Proficient in AutoCAD, MS Office.
• Excellent analytical, organizational, and problem-solving skills.
• Strong communication, leadership, and team collaboration abilities.

[Job ID: 1617130]

Job Summary:

Experienced laser engineer to install, configure, and optimize depaneling systems, ensuring precision performance and supporting advanced customer applications.

Responsibilities

• Perform installation and alignment of laser units on depaneling machines
• Configure machines based on internal specifications and customer requirements
• Conduct camera calibration, field calibration, and software debugging
• Perform health checks on incoming laser systems and coordinate defect resolution with vendors
• Maintain accurate records of installed laser components and optical parts
• Support laser processing experiments, including cutting trials and sample measurements
• Troubleshoot laser-related issues on deployed machines
• Deliver customer training, demonstrations, and operational guidance
• Collaborate with design teams and external vendors to develop customized solutions

Requirements

• Minimum 3 years of experience in automation industry with hands-on experience operating machinery
• Strong knowledge of laser systems and machines
• Experience in optics and laser technology is an added advantage
• Possession of a valid laser license
• Ability to perform machine configuration, calibration, and troubleshooting
• Willingness to travel overseas up to 5% when required

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations:

https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Saito Ryuya

EA Personnel Reg. no.: R23116168

EA License no.: 07C5771

Job Description

• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing and voltage drop calculation, power system study, etc.
• Develop cost estimates for electrical equipment and electrical works.
• Develop the work schedule and coordination of the project works to ensure project is on schedule.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Prepare all relevant checklist for Installation and Testing & Commissioning Works.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Collaboration with internal stakeholders, clients, consultants, vendors and contractors.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Electrical Works related design, installation and Testing & Commissioning Works.

Requirement

• Degree in Electrical Engineering.
• 3 to 5 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of the electrical works e.g., high voltage system,
• Low voltage distribution system, transformers, motor starters, motors, cabling works, earthing and lighting
• protection system, small power and lighting system, etc.
• Good technical knowledge in understanding the Electrical System.
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Highly motivated and able to work independently with minimal supervision.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office