Total 1,302 Junior Executive level Engineering job vacancies

• Assist engineers in site inspections, maintenance, and project coordination.
• Handle transportation of equipment and materials to project sites.
• Perform basic troubleshooting and support installation of M&E systems.
• Maintain proper documentation and reports for site activities.
• Ensure compliance with workplace safety regulations.

Requirements:

• Diploma in Mechanical and Electrical Engineering
• At least 2 years of engineering support experience in M&E sector.
• Possess a valid Class 3 driving license with a good driving record.
• Good knowledge of M&E systems and hands-on technical skills.
• Ability to work independently and support multiple project sites.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description :-

• Responsible to analyze, review and approve customer ECO (Engineering Change Orders) and Implement ECO for Engineering related.
• Responsible to develop and maintain (review and approve) Work Instructions, Equipment procedures and Validation / Verification protocol & report etc.
• Responsible to develop and maintain Chemical samples, Test methods etc. for production line
• Responsible to provide training to production personnel on Work Instructions and Equipment procedures
• Troubleshoot and resolve daily production line test equipment and test failure issues and improve First Pass Yield.
• Responsible to review and approve Incident Reports, if any.
• Maintain Consigned/In-house test equipment and conduct PM (Preventive Maintenance) and repair support as required.
• Participate in periodic Validation/Calibration activities to ensure smooth running of production line.
• Participate in LEAN activities pertaining to Cycle Time, Test, Safety and Yield improvements for Line balancing and capacity studies.
• Other tasks as and when required and directed by Engineer.
• Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Responsibilities:

• Assisting engineers with the design, creation, and assembly of machines, systems, and their components.
• Performing tests and inspections to verify designs and ensure quality control, which may involve using measurement metrology or engineering simulations.
• Supporting the repair, maintenance, and troubleshooting of systems and equipment
• Following workplace safety and health (WSH) procedures, preparing documentation, and ensuring compliance with relevant standards (e.g., ISO 9001, ISO 14001, ISO 45001).
• Working closely with engineers, project teams, and technical support staff to meet project requirements and provide feedback.
• Applying specific technical skills related to the project, which could range from using automation control for machines to working with software development lifecycle methodologies. 

Requirements

• Min Diploma in Mechanical, Electrical, Computer Science or relevant
• Min 1 year of working experience

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Summary

Create detailed 2D technical drawings and 3D models using CAD software. Collaborate with engineers and architects to develop compliant, accurate designs. Manage revisions and assist with documentation to support engineering projects.

Responsibilities

• Use Computer-Aided Design (CAD) software to produce precise 2D technical drawings and 3D structural models for engineering projects
• Collaborate with engineers, architects, and stakeholders to translate design concepts into detailed, actionable layouts
• Ensure all drawings comply with relevant building codes, safety standards, and project specifications to maintain quality and regulatory adherence
• Incorporate feedback from field changes and consultant input to revise and update design drawings accurately
• Assist engineers by preparing documentation, reports, and submissions for regulatory authorities to support project approvals

Preferred competencies and qualifications

• Expert proficiency in CAD software such as AutoCAD, SolidWorks, or Revit to efficiently produce technical drawings
• Solid understanding of engineering principles and construction techniques to inform accurate design development
• Strong attention to detail to create precise documentation that minimizes errors during construction or production
• Diploma, associate degree, or certificate in drafting, engineering design, or a related field
• 3–5 years of relevant experience in drafting or engineering design

Responsibilities:

• Monitors accounts receivables and process payments
• Prepare monthly reports,including project status & AR Aging status
• Prepare quarterly report for GST claims
• Verify monthly costing for Budget Control of the current projects
• Liaise with auditors and tax agent for audit/ tax schedules,reports, etc.
• Filing of suppliers’ invoices, Payment vouchers and documents
• Any other tasks assigned by his supervisor and to carry out compliance enforcement

Requirements

• LCCI/ACCA/ Dip in Accountancy / CPA
• Fresh Graduates without experience are welcome.
• Working experience with listed companies with some basic consolidation experience will be an added advantage
• A team player with the ability to thrive in a fast-paced environment
• Must be able to work independently
• Detail-oriented, meticulous,and able to multi-task and meet tight deadlines
• Good analytical skills and able to perform under pressure
• Team-oriented, flexible,proactive and positive working attitude

Job Responsibilities:

• Provide daily support for systems software, networks, servers, and end-user devices via IT Helpdesk, remote assistance, and onsite support.
• Station at client sites or travel to multiple locations daily as required.
• Configure, maintain, and troubleshoot network infrastructure for office and store locations, including LAN, WAN, WLAN, VPN, and wireless systems.
• Administer and manage server infrastructure (on-premises and cloud), including AWS, DNS, Active Directory, DHCP, and domain controllers.
• Deploy and manage customer server hardware, virtual machines, storage appliances, routers, firewalls, switches, and other network equipment.
• Plan, lead, and execute system and network infrastructure deployment projects.
• Assist in developing infrastructure designs based on technical requirements and standard IT service offerings.
• Monitor system and network performance, troubleshoot issues, and ensure uptime meets service level agreements (SLAs).
• Implement proactive improvements by analyzing past incidents and identifying weaknesses in the infrastructure.
• Implement and maintain network and system security measures including firewalls, IDS/IPS, and secure access policies.
• Apply formal change management, incident management, and problem management processes.
• Maintain documentation, checklists, and regular reports for operational tasks.
• Perform other ad-hoc duties as assigned.

Requirements:

• Diploma/Degree in Information Technology or a related discipline.
• Hands-on experience working in a Windows environment.
• Microsoft-related certifications or other relevant technical qualifications will be an advantage.
• Strong interpersonal and communication skills, with the ability to work effectively with all levels of personnel.
• Independent, self-motivated, and capable of handling responsibilities with minimal supervision.
• Ability to prioritize tasks effectively and perform under tight timelines.
• Strong analytical and problem-solving skills.

Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Job Responsibilities:

• Assist the team with HMI graphics design and updates.

• Aid the team in implementing P&ID logic using Programmable Logic Controllers.

• Perform preventive and corrective maintenance at customer sites or premises.

• Help the team with cybersecurity vulnerability threat patching for project hardware and software.

• Provide support to the team in maintenance projects.

Job Requirements:

• A minimum Diploma in Electrical/Computer Engineering.

• Industrial experience in process automation and M&E control systems.

• Proficient in PLC programming, FactoryTalk View SE, Studio 5000, and C programming.

• Good Pay + Good allowance + Good Bonus

• Interested candidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’s your resume to 98332779 ( no Calls)

• Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

The Job

· Assist Supervisor in day-to-day operation lines.

· Planning & Co-coordinating the workflow on production lines to achieve production targets.

· Troubleshooting production problems and assisting in planning new project work.

Requirements:

· Diploma in Mechanical / Mechatronics / Electrical Engineering

• Good Pay + Good allowance + Good Bonus

• Interested candidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’s your resume to 98332779 ( no Calls)

• Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Entry level / Junior welcome apply

5 days work week / Permanent Role / Company transport provided

Full training provided !!

Job Responsibilities :
* Perform quality control analysis for in-coming, intermediate and final products
* Carry out calibration of equipment and ensure in working condition
* Ensure activities in the laboratory are safe
* Maintain up to date analysis reports

Job Requirements :
* Nitec / Diploma in Chemical Process Technology / Chemistry or equivalent
* Preferably with hand on experience in sampling, preparation and analysis for
liquid samples
* Prefer experience in handling laboratory analytical
equipment

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description:

Industry/ Organization Type: Construction

Position Title: Admin cum Accounts Clerk

Working Location: 280 Woodlands Industrial Park E5 #09-36 Harvest Singapore 757322

Working Hours: Monday to Friday, 09:00 am – 6:00pm Sat : 09:00 – 13:00pm

Salary Range: SGD 2,500.00 – SGD 4,200.00

Annual Leave: 7 days

Duration: Permanent

Key Responsibilities:

Prepare project progreess claim and submit monthly project press claim.

Issue project statement account and chase payment.

Issue project invoices and quotations.

Issue monthly maintenance invoices, statement account and chase payment (every month need to issue around 300 pools maintenance invoices)

Prepare tender document and tender submission.

Issue daily project quotation .

Issue daily purchase orders and company stuff.

Speak mandarin and liaise with china supplier , source materials from china

Prepare ISO Audit and ISO document control.

Arrange overseas materials shipping.

Issue payment voucher

Perform all administrative and clerical duties (such as filing, photocopying etc.)

Record and filing all employee's KET ,employee's annual leave, medical leave.

Liaise with main contractor and consultant

Monitor stock of office and warehouse suppliers and place orders when it is necessary.

Other ad-hoc duties as assigned.

Job Description

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements

• Min Nitec in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License
• knowledge in PLC and SCADA

To submit your application, please apply online apply@rn-care.com or call +(65) 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Assistant Engineer / Junior Engineer
• Working Location: Tampines
• Working Hours: 5.5 days (Mon to Fri 9AM – 7PM, Sat 9AM – 1PM)
• Salary Package: Basic Salary up to $2,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Setup, operate and maintain all measuring equipment, gauges, and fixtures.
• Perform troubleshooting and repair of machinery and equipment
• Programming of CNC lathe machine
• Operate turn mill machines with automatic bar feeder for production
• Monitor production progress and fine tuning the machine to optimize production of components
• Any other ad hoc duties as assigned

APPLY NOW!!!

• Minimum ITE/Diploma qualification
• Prior experience in engineering industries would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #77200 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Benefits:

• Basic up to $4000

• Mon to Fri, Office hours

• Location: North

• Great company culture and benefits

• Long-term career progression plan

Job Scope:

• Document and standardize factory and production processes and procedures across the Group.

• Identify opportunities for process improvements and implement automation initiatives to enhance efficiency and productivity.

• Support the deployment and implementation of production processes and procedures across Singapore and overseas operations.

• Manage and support the development of next-generation production systems for switchgear manufacturing and assembly.

• Ensure compliance with internal standards through audits of factory operations and process engineering practices across the Group.

• Collaborate with operations teams to drive continuous improvement initiatives in manufacturing processes.

• Perform other duties related to operations and process engineering as assigned.

Job Requirement:

• Diploma or Degree in Electrical Engineering, Mechanical Engineering, or a related discipline.

• At least 1 year of relevant experience in process engineering within a manufacturing environment will be an added advantage

• Entry levels are welcomed, as training will be provided.

Please submit your updated resume in MS word format by using the APPLY NOW BUTTON.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Good Pay + Good allowance + Good Bonus

Assist Supervisor in day-to-day operation lines. Planning & Co-coordinating the workflow on production lines to achieve production targets. Troubleshooting production problems and assisting in planning new project work.

Requirements:

• Must be Diploma in Mechanical / Mechatronics / Electrical Engineering

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Company Overview

Luft Env Technologies Pte Ltd is a dynamic bespoke laboratory designer and planner serving Singapore and Asia Pacific. We deliver state-of-the-art labs and provide design, consultation, construction, and maintenance for life science, healthcare, and food industries.

Job Summary

You will lead mechanical and electrical maintenance and installation projects, ensuring quality, safety, and timely completion. Collaborate with clients, suppliers, and subcontractors to deliver effective M&E solutions and troubleshoot facility systems.

Responsibilities


• To provide mechanical and electrical repair and troubleshooting works
•  Overseeing and planning of scheduled maintenance works
•  Liaise with customer, supplier and contractors on costing, quotation and works evaluation
•  Liaise with various stakeholders (client, subcontractor, etc.) to ensure M&E work progress
•  Supervision of subcontractor works
•  Supervision of M&E related site works
•  Ensure timely and smooth progress of works
•  Carry out inspections when required to ensure quality checks and safety regulations are complied
•  Carry out maintenance work and monitor term contractors on regular servicing.
•  Perform hands-on building M&E preventive maintenance and attend to fault complaints like basic electrical and air-con works
•  To plan, organise and supervise major M&E installation works on site, such as chillier / electrical system, substation, clean room system and equipment hook-up works
•  Carry out other ad-hoc duties or projects assigned