Total 1,524 design editor job vacancies in The Philippines

~ 5 days work week, Monday - Friday 9am - 6pm

~ Location: Suntec

~ No experience is welcome to apply! On the job training is provided

~ 6 months contract and convertible to permanent based on performance

Our client is a solar energy solution provider in Singapore

Responsibilities:

• Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution. Able to check site feasibility and provide the best suitable option for enhancing suitability.
• Designing of arrangements of the solar panels for Rooftop & Ground Mounted PV system including layouts, Single line diagram (SLD), schematic diagrams, calculation of sizing and BOQ of material. Highly experienced with Autocad.
• Drawing/Document submission/approvals, scheduling, Factory inspections, proving the guaranteed prepared a generalized check list for review of all standard. End to end execution of solar projects (Rooftop & Ground Mounted) and Service Support.
• Familiar with PV simulation software such as PVsyst and Helioscope.
• In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer

Requirements:

• Possesses minimum Degree in Electrical Engineering/Renewable energy-related field
• Minimum 1.5 year of experience in handling solar projects preferred
• No experience is welcome to apply! On the job training is provided
• Has knowledge in electrical design concepts

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to ref32@stafflink.com.sg to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

• Well Established Company
• Salary $2550 - $3650 (Basic) + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas Crescent (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.30am to 5.15pm

Job Responsibilities:

• Prepare and produce AutoCAD electrical drawings.
• Prepare production drawings, including detailed BOM list.
• Generate as-built drawings based on panel testing, FAT and SAT, as required.
• Attend meetings with Sales/Project teams to resolve drawing-related issues and liaise with consultants/customers on design matters and drawing preparation.
• Able to travel to Malaysia. Able to perform overtime as and when required.
• Carry out urgent tasks and drawing assignments as directed by the superior.
• Provide support to Project Engineers when additional manpower is required.
• Attend panel Factory Acceptance Tests in Singapore or Malaysia, as required.

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Minimum 1 year of relevant experience
• Proficiency in AutoCAD will be an added advantage

Candidates are encouraged to apply this position via ApplyNow button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will becontacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Key Responsibilities:

·      Write and develop original content, print and digital, that is engaging, clear and aligned with the Church’s voice and tone.

·      Oversee the end-to-end editorial workflow, ensuring consistency in style, doctrinal soundness and alignment to Trinity’s ministry philosophy.

·      Supportthe development of the Church’s publication pipeline by contributing new ideas and identifying opportunities to repurpose content.

Job Description.:

• You need to understand the management of company operations and processes. You will need data analytics to monitor performance, identify insights, and enable data-driven in the company. You will be required to participate in the management of project processes and project timelines.

• Perform detailed scoping of the project by working closely with all functional leads – including the alignment of the workstream’s outcome, responsibilities, task lists and timelines.

• Delegating on behalf of the manager.

• Weighting in on decision-making processes by presenting reasonable, fact-based points of view.

• Carrying out specific projects or tasks as instructed by the manager.

• To handle any related administrative tasks.

Requirements

· Proficiency in MS Office (Word, Excel, Outlook and PowerPoint).

· High level of interpersonal skills in handling sensitive and confidential situations and documents.

· Proven ability to manage flexible schedules.

· Minimum 3-years management executive work experience in Singapore.

· Diploma and Bachelor’s degree in Business Management and Administrative Support are preferred.

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Job Responsibilities:

Hyperscale Server Design Engineer is responsible for designing, validating, and optimizing high-performance server hardware, racks, and infrastructure systems to support massive-scale cloud computing environments. Responsibilities include:

• Conduct server feasibility studies, define and maintain hardware architectures and solutions, and create execution plan.

• Design schematic, create BOM, support prototype/engineering build.

• Guide and work with PCB engineers on layout and placement.

• Design, deploy, and operate large-scale GPU-based compute environments, including optimizing network topologies like InfiniBand and Ethernet.

• Lead server validation and bringing up complex systems, including lab validation, SI/PI (Signal Integrity/Power Integrity) analysis, and debugging.

• Partner with software, datacenter engineering, mechanical and thermal, and vendor teams to ensure seamless hardware/software integration. Drive root cause analysis and corrective actions.

• Apply advanced knowledge of server energy efficiency and power redundancy to optimize for performance and cost.

• Work with manufacturing teams to resolve issues and to support NPI and production builds.

• Provide technical expertise and consultation to peers.

• Maintain consistent high quality of engineering design work to develop robust, high performance and cost effective designs and products.
  

Job Requirements:

• Degree/Master in Electrical/Electronic/Computer Engineering or equivalent

• Minimum of 5-10 years of experience in computer architecture, server design or hardware validation.

• Strong design experience and knowledge in any of the following:

  • Knowledge of GPU/CPU architectures, high-speed interfaces (QSFP-DD/OSFP) and memory interfaces such as DDRx DRAM, NAND/NOR/SPI Flash.

  • High speed interfaces including PCIe, NVLink, GbE, SAS, USB.

  • BMC implementations.

  • High DC voltage power designs and distribution, and thermal management.

  • High-speed Ethernet networking.

  • Experience with liquid cooling is an advantage.

• Understanding integration of software and hardware.

• NPI project execution experience and familiarity with Product Development Life Cycle will be desirable.

• Experience using CAD tools (e.g. Cadence Allegro, Mentor PAD).

• Experience with SI/PI simulation (e.g. ANSYS HFSS/SIWave) and lab equipment like high-speed oscilloscopes and VNAs are added advantage.

• Familiar with ISO9001.

• Troubleshooting skills in high-speed signaling, thermal or power delivery.

• Self motivated and willing to learn new technology and skills who works well under pressure.

• Excellent oral and written communication skills.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Results-oriented and adaptable to changes

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

Responsibilities:

• Research, design and develop lighting systems and modules for customised products or new products.
• Evaluate and develop design improvement, technical solution and cost reduction for existing products.
• Analyse manufacturing problems and recommend solutions.
• Perform and check engineering calculations and prototypes to verify product design and production methods.
• Source for and evaluate suppliers, components and products.
• Create, monitor and evaluate test programs to verify/validate product performance.
• Prepare calculations, schedules, reports, drawings and other related documentations and analysis.
• Create, check and maintain appropriate engineering documentations in support of a product design, in accordance with Company’s procedures.
• Provide sales, production, operations and project teams with technical and design support onsite and offsite.
• Track project status and coordinate for successful testing, commissioning and completion.
• Maintain library of research data, detailed methods, evaluation of components, materials, products and production methods.

Requirements:

• Bachelor Degree in Engineering (or similar based on experience).
• Minimum 5 years of relevant working experience.
• Portfolio of products designed and produced.
• Examples of solutions engineered.
• Proficiency in the use of Microsoft Office, AutoCAD 2D/3D and lighting calculation software.
• Experience in 3D printing.
• Experience in manufacturing processes and materials.
• Advanced analytical, critical thinking and decision-making skills.
• Interest in research, dive deep on subjects and able to self-learn.
• A keen eye for detail, organized, resourceful and independent.
• Team player with excellent written, pictorial and verbal communication skills.
• Good project management skills.
• Positive attitude and commitment to make a difference.

Benefits & Others:

• 5.5-day (alternate Saturday) work week.
• Training will be provided.

Location: Kaki Bukit
Salary: $4,000 – $5,000
Working Hours: Monday to Friday, 8:00 AM – 5:30 PM
Industry: Semiconductor

Key Responsibilities:

• Design and develop precision tooling, jigs, fixtures, and mechanical components
• Prepare detailed 2D and 3D drawings using AutoCAD and SolidWorks
• Work closely with production and engineering teams to ensure design feasibility and manufacturability
• Modify and improve existing designs based on project requirements
• Ensure all designs meet technical specifications and industry standards
• Support prototyping, testing, and troubleshooting activities

Requirements:

• Diploma or Degree in Mechanical Engineering or related field
• Proven experience in precision engineering and/or semiconductor industry
• Proficient in AutoCAD/ SolidWorks
• Strong understanding of tooling design and mechanical components

To apply, please click on “Apply Now” or email your latest resume to dorothy@recruitlync.com / WhatsApp 85017683.

Ooi Shi Hui Dorothy (R1762852)
Recruit Lync Pte Ltd (22C1000)

Responsibilities:

• In charge of establishing the process and work in the team to implement risk management best practices in projects
• Implement and maintain the office's ISO 13485 and IEC 62304 compliant quality management system processes and procedures across departmental work and projects.
• Responsible in providing guidance and development support to the projects handled
• Taking charge of validating and advising project teams on regulatory, quality and risk requirements
• In charge of implementing and maintaining ISO 13485 and IEC 62304-compliant quality management system processes and procedures
• Responsible in
• In charge of managing project tasks which includes ensuring of timely completion of project milestones and meeting KPIs
• In charge of compliance with quality, regulatory and organisational policies and systems while supporting required record-keeping and documentation.

Requirements:

• Min Degree in Engineering /Science or relevant
• Min 2 years of working experience in QMS, Risk Management and design & development in medical industry
• Experience in ISO13485 /IEC62304 audit is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Mechanical Design Engineer (Semiconductor Tooling Design)

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

• Well Established Company
• Salary $2550 - $3650 (Basic) + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas Crescent (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.30am to 5.15pm

Job Responsibilities:

• Prepare and produce AutoCAD electrical drawings.
• Prepare production drawings, including detailed BOM list.
• Generate as-built drawings based on panel testing, FAT and SAT, as required.
• Attend meetings with Sales/Project teams to resolve drawing-related issues and liaise with consultants/customers on design matters and drawing preparation.
• Able to travel to Malaysia. Able to perform overtime as and when required.
• Carry out urgent tasks and drawing assignments as directed by the superior.
• Provide support to Project Engineers when additional manpower is required.
• Attend panel Factory Acceptance Tests in Singapore or Malaysia, as required.

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Minimum 1 year of relevant experience
• Proficiency in AutoCAD will be an added advantage

Candidates are encouraged to apply this position via ApplyNow button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will becontacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492