Total 4,798 Others level Maintenance / Repair job vacancies

Main Duties And Responsibilities To Be Accomplished :

• Organize the maintenance schedule for all equipment in Plating

• Carry out installation and modification of machines and equipment

• Carry out all general maintenance work on plating line equipment, ie motor, pump rectifier etc.

• Carry out general electrical works, repairs, troubleshooting and maintenance of machines and equipment.

• Liaise with vendor to do repair on equipment or process, cleanness

• Purchase component and spare part related to electrical and control item to minimize the cost

• Daily / periodic check, record and feedback all plating equipment for continuous operation

• Support DI/waste treatment operation

Requirements

• Diploma in Electrical or Mechanical

• More than 3 years of working experience in maintenance environment

• Able to read electrical drawing and Autocad experience

• Able to work independently with minimum guidance.

• Able to communicate effective

• Willing to overtime when required

Working hours:

Shift work,2 shifts, 12 hours rotation (4 days work week)

• Salary: Range: $2,000 - $2,400 
• Working Days: 5 days, Monday to Friday
• Working Hours: 8.30am to 5.30pm
• Location: West – Jurong East / Toh Guan

Responsibilities:

• Respond to scheduled and unscheduled maintenance service requests at customer premises.
• Troubleshoot and repair system abnormalities during maintenance service calls.
• Perform maintenance service in accordance with Company Service Agreements.
• Supervise and control subcontractors’ work quality for maintenance works.
• Provide technical support to other departments’ staff.
• Perform other duties as assigned.

Requirements:

• Possess at least a Nitec or Higher Nitec in Electronic or Electrical Engineering
• 1–2 years’ relevant experience in service and maintenance of alarm, card access and CCTV systems.
• WSQ certifications such as Building Construction Safety Supervisor, Work-at-Height and Risk Management will be an added advantage

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

CCTV Technician
Salary: $ 2,450 - $ 3,200
Working Hours: Monday - Friday / 8.45am to 6pm | Alternate Saturday / 8.45am to 1.15pm
Location: Tiong Bahru

 Job Description:

• Technical knowledge for cabling & tracing work (UTP)  
• Skillset in CCTV / Door Access / Telephony / WIFI setup
• Able to handle customer / basic project coordination
• Basic Programming / IT for above product in item 3 added advantages
• Ad-hoc duties as per assign
   

Job Requirements:

• Possess ITE / Diploma certificate
• Possess Class 3 or 3A License

Email: supreme.jacksontan@gmail.com

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Job Description:

• Preparation of samples and standards for analysis
• Routine laboratory testing according to ASTM methods
• Operation and maintenance of instrumentation
• Maintenance of relevant documentation
• Any other duties as assigned when required
• Ensure all works and reporting of results are in accordance with Quality, Work and HSE procedures and requirements

Requirements:

• Minimum ITE Nitec/Higher Nitec/Diploma in Chemical Process and related fields
• Candidate with experiences is an added advantage
• Fresh graduate is welcomed as training will be provided
• Good analytical skills and ability to work independently
• Able to start work on short notice preferred

Work location : 121 Genting Lane, ALS Building, Singapore 349572
Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

Job Description & Requirements

• Report directly to the Project Manager, VDC Manager.
• Assist Project Director & VDC Manager to lead a team of BIM Coordinators and BIM Engineers.
• Setting BIM Standards and generating BIM Contents for Company and Projects.
• Ensuring implementation of BIM processes.
• Provide guidance and training internally in BIM and VDC applications and authoring.
• Leading and agendas for ICE Session, BIM Coordination, and relevant meetings.

Requirements

• Relevant Certificate/ Diploma / Degree or equivalent.
• Specialist Diploma in BIM and Computational BIM (by BCA) will be an advantage.
• 5-10 years working experience on site in building or civil engineering project.
• 5-10 years experience in design, drafting, modelling, technical, planning or engineering.
• 5-10 years experience in BIM authoring software (Autodesk Revit, Navisworks, etc.)
• Experience in application using Autodesk Dynamo and other Revit API application program software will be an advantage.
• In-depth working knowledge of current BIM versions and applications.

What You'll Do

You will join the Singapore District Cooling (SDC), an arm of SP Group who provides district cooling and heating services to developments in Singapore and China. Your key responsibilities will include:

• Perform maintenance tasks for instrumentation and control for District Cooling System 
• Understand and able to troubleshoot with IO problem, Instrument problem, Control Valves, transmitter and Control System 
• Participate and assisting engineer in development of designing of control system architecture, control philsophy, P&ID, logic diagrams 
• Perform schedule maintenance and calibration for instrument element, sensors control valves and control panels.  
• Supervise contractor to carry on the Instrumentation and control system maintenance service.
• Perform annual shutdown service and maintenance service for instrument system and control system (RTD sensor, level transmitter, actuator, flow transmitter, pressure differential transmitter)
• Support testing & commissioning and troubleshooting in any district cooling plant, industrial and commercial building cooling plant
• Review method statement for installation of instrumentation
• Interface with other discipline, client and vendors
• Supervise junior technicians to ensure technical accuracy and strict safety compliance

What You'll Need

• Diploma in Instrumentation, Electrical & Electronics, Mechatronics, Mechanical
• At least 5 years of experience in project management or field & application experience in chiller or instrumentation and control industry
• Ability to work independently on the troubleshooting and service of instrumentation and control for new and existing developments including district cooling plant, centralised cooling system and remote off-take station
• Knowledge in Cooling Systems instrument and control will be an added advantage 
• Experience in HMI/SCADA/PLC configuration, troubleshooting
• Knowledge and hands on skills in instrument calibration for RTD, level transmitter, actuator, flow transmitter, pressure differential transmitter
• Basic knowledge in evaluating construction shop drawings
• Good interpersonal skills and ability to work as a team 

What We'll Provide

• We have regular wellness programmes to promote healthy living​
• Join us to empower the future of energy
• You will work in teams that thrive on collaboration for outstanding achievements

Thank you for your interest in SP Group. You will be contacted if you are shortlisted for an interview.

Job Description:

• Manage and lead a team of engineers, technical officers, supervisors, technicians and contractors in facility management and operation of assigned buildings / estates

• Plan training requirement for staff needs for skills improvement

• Ensure staff has the necessary skill and ability to handle repair and maintenance work

• Establish good working relationships with own team members, building owners, clients and to develop trust and confidence

• Prepare and approve daily, weekly and monthly reports for submission to client

• Establish and maintain a high quality service standards

• Coordinate and liaise with external agencies on new initiatives and major repairs and maintenance works

• Approve tender documents and specifications for various services

• Plan, coordinate and approve rectification works

• Study, propose and implement feasible improvement works

• Responsible for project costing and control

• Prepare and responsible for annual budget submission

• Prepare and responsible for closing of audit report

• Prepare assessment report for contractors' performance

• Certify contractors' payment

• Ensure staff and contractors follow the House Rules and Disciplines

• Providing feasible solution and coordinate with owners / users, consultants, vendors / contractors on engineering functional requirements and ensure the objectives are achieved.

• Conduct regular inspection of all systems to ensure that all maintenance programmes are implemented effectively in strict compliance with instructions and guidelines.

• To ensure all works carried out safely and / or in accordance with safety procedures.

• Ensure all preventive maintenance works are carried out according to the contractual agreed checklist and schedule.

• Assign engineers and technicians to attend breakdown / complaint promptly as and when it is made known to him.

• Feedback status of major works to FM HOD.

• To manage and attend to maintenance complaints, investigations and rectification works.

• To ensure safekeeping of hand tools and maintain good housekeeping.

• Any other tasks, when required by Senior Manager.
  

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent within facilities maintenance and project work from a recognised institution.
• Bachelor's degree in Mechanical/Electrical Engineering or equivalent within facilities maintenance and project work from a recognised university.
• At least 5 years of related working experience for Degree holder or at least 10 years of related work experience as diploma holder.
• Preferably with working experience in healthcare facilities.
• Able to work independently and posses good interpersonal skills
• Good communication skills both verbal and written
• Pro-active, able to work with minimal supervision and perform under pressure
• Service orientated mindset
• Possess high level of initiative and integrity
• Possess strong leadership, quality, good planning and organizing ability
• Amenable to work 5.5 working days per week

Up to $3,200 Basic Salary + AWS + VB
Nearest MRT: Pioneer (Company Bus Pick Up)


Conduct measurement and analysis using measurement tools in the lab and the cleanroom

Job scope:

➤ Conduct, analyse and publish evaluation and/or failure analysis results using measurement tools.
➤ Co-ordinate and work together with the engineer to ensure compliance with completion target dates,
and to assist the line to run smoothly.
➤ Ensure compliance with ISO quality and safety standards
➤ Proper 5S housekeeping
➤ Any other ed-hoc as assigned by the superior

Requirements:

➤ Minimum Higher NITEC or Diploma in Science/ Engineering
➤ Open to entry-level or candidate w/ few years of working experience
➤ Must have Basic communication skills in English or Mandarin to liaise with Mandarin-speaking counterparts and stakeholders.
➤ Must have basic computer skills
➤ Open to working in a cleanroom environment
➤ Open to work in night shift
➤ Willing to work overtime as required.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Khoo Tiffany

EA Registration No: R22107626

Pasona Singapore Pte. Ltd.

EA License No: 90C4069

• In charge of repair, maintenance, and troubleshooting of machinery onboard.
• Execute lathe machining, basic gas welding, and cutting works to facilitate repair to machinery.

Requirements:

• Nitec in Mechanical engineering or equivalent
• At least 2 years of experience in mechanical fitment, basic gas and TIG welding, hydraulic and pneumatic system troubleshooting.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Basic up to $4,000, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job scope:

• Performing Installation & modification of electrical, electromechanical and electronic parts of forklifts
• Troubleshooting electrical systems & wiring of electrical panels
• Understanding schematic diagram

Requirements:

• ITE/Diploma in any engineering related field
• Experience in hands on technical roles and able to read schematic diagram

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (7am - 4.30am)

Work Location

• Tampines/ Upper Changi

Multinational corporation is looking for mechanical technician

Job scope:

• Conducting fabrication, MIG welding, & fitting
• Assembly parts for equipment
• Other general duties

Requirements:

• Understanding MIG Welding
• Experience as mechanical fabricating & fitting

5 days’ work week, office hours

Great benefits

Sterile Services Technician (3-Month Contract) | Up to $12/hr | Hospital Support Role | Immediate

$10/hr (AM) | $12/hr (PM)