Total 2,966 Manufacturing / Production job vacancies

• Working Location: Central Area
• Salary: $1500 - $5000
• Working Hours: Shift Work
• Long Term Career Development
• Training Provided
• Company Accommodations Provided
• Fresh Graduates are welcomed

Job Responsibilities:

• Operate ROVs (underwater robotic systems)

• Monitor underwater cameras and sonar systems

• Perform basic maintenance and troubleshooting of robotic equipment

• Maintain real-time communication with the operations team

• Prepare operational reports and summaries

• Assist in the setup and calibration of ROV and related equipment before missions

• Work at ports, vessels, and marine operational sites, including night shifts

Requirements:

• Physically fit

• Diploma in Mechanical, Electrical, or Marine Engineering

• Training will be provided for candidate without or with lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.


Barry Ang Ze Xin (Reg No : R26159529)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical or Electrical Engineering
• Relevant experience would be advantageous
• Relevant internship / academic background would be considered

Work Arrangements (shuttle bus available)

• AM Shift (7AM to 430PM)
• PM Shift (4PM to 130AM) $25/shift allowance
• Mon - Fri / Tues - Sat / Sun - Thurs (shift patterns available)

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOL Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394 • EA Registration No. R1877971 (Derrick Tiew Yong Han)

Your Tasks

• Interpret and follow assembly work instructions, schematic diagrams and technical specifications
• Maintain production procedures, work instructions and build documentations
• Perform wiring, cabling and mechanical assembly
• Coordinate with Engineering, Planning and Quality functions to resolve production issues
• Perform routine and preventive maintenance on equipment to ensure optimal operation
• Perform testing, calibration and quality control checks on equipment to ensure accuracy and reliability
• Manage non-conformance, root cause analysis and corrective actions
• Management of incoming materials and outgoing finished goods, including material kitting, stock count etc.
• Ensure adherence to WHS policies and safe working practices
• Ensure 5S and proper housekeeping

Qualifications

• Experience in electronics manufacturing or production
• Strong hands-on skills in mechanical, electronic, assembly and testing
• Knowledge in using hand tools and equipment for assembly tasks
• Good organizational and time management skills
• Commitment to workplace safety and quality
• Strong communication and teamwork skills
• Strong analytical and problem-solving skills and the ability to work independently or as part of a team
• Attention to details and the ability to work meticulously
• Ability to work in a fast-paced and dynamic environment

Position: Production Support – Data & Reporting

You will be part of a globally distributed team of Support Analysts providing follow-the-sun coverage across AMR, EMEIA, and APAC regions. In this role, you will:

Deliver Cross-Platform Subject Matter Expertise: Develop and maintain deep working knowledge across two reporting platforms — Horizon (Total/B2C Consumer Markets)and Business & Education 360 (B2B) — including data definitions, businesslogic, pipeline behavior, and differences in reporting structures between Consumer and Institutional Sales.

·      Operate a Tiered Support Model: Function as Tier 1 support for requests thatcannot be resolved through automation — including missing or incorrect datainvestigations, cross-report discrepancies, metric interpretation, and platformlogic clarification. Function as Tier 2 oversight for automated workflows(Slack forms, Accord bot, HCL), intervening when automation fails, requests areincomplete, or unusual patterns require manual review.

·      Manage the Slack Support Workflow: Monitor and triage incomingSlack support requests across five categories — Access Requests, Report DataInaccuracy, Report Other Problems, Enhancement Requests, and general questions— ensuring accurate categorization, timely response, and clear user communicationincluding request status and resolution ETA.

·      Conduct Data Investigation & Reconciliation: Investigate and resolvecomplex data questions, including reconciling metric discrepancies between Horizon and B&E 360, validating report accuracy, diagnosing unexpected reporting behavior, and identifying data pipeline or logic issues. Determine whether an issue reflects user misunderstanding, expected platform behavior,data latency, or a true defect requiring escalation.

·      Guide Users on Data Interpretation: Provide clear, accurate explanations of metric definitions, data availability, reporting limitations,and platform-specific logic to ensure users correctly interpret data across both B2C and B2B ecosystems.

·      Ensure Operational Continuity & Escalation: Collaborate with thePlatform Operations Lead, Data Engineering (GBI), and Reporting Product Owners to escalate platform defects, broken data pipelines, and systemic reporting issues. Support executive-level inquiries requiring deeper analysis.

MinimumQualifications

·      Experience in Sales or Channel Performance reporting and related metrics and KPIs, ideally within a technology company.

·      Demonstrated ability to support business-critical BusinessIntelligence platforms in an operational capacity.

·      Experience querying data sources to investigate, validate, and explain data to business users.

·      Experience working with BI platforms and tools such as Tableau,ThoughtSpot, Business Objects, or equivalent.

·      Ability to manage concurrent support requests across multiple platforms and time zones with consistent quality and responsiveness.

·      Strong written and verbal communication skills, with the abilityto translate technical findings into clear business language.

·      Bachelor's degree or equivalent experience required.

PreferredQualifications

·      Familiarity with B2B and B2C sales reporting structures, includingInstitutional Sales, Consumer Channel metrics, and related data definitions such as ICDF.

·      Experience operating within automated support workflows (e.g.,Slack-based intake, chatbots, or ticketing systems) and managing exceptionhandling when automation is insufficient.

·      Ability to work effectively in a globally distributed team model with regional handoff requirements and follow-the-sun coverage expectations.

·      Knowledge of data pipeline concepts sufficient to distinguish between data latency, logic errors, and platform defects during investigation.

·      Experience collaborating with engineering and product teams to escalate, document, and track resolution of platform issues.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the Tech Aalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

Key Responsibilities

• Perform incoming inspections on raw materials and components to ensure compliance with quality standards and specifications
• Conduct first-off inspections for machining processes to verify correct setup and adherence to tolerances
• Carry out in-process inspections during assembly to maintain consistent product quality
• Perform final inspections prior to shipment, ensuring all products meet internal and customer requirements
• Coordinate with external vendors for calibration of measuring equipment and ensure all tools are within valid calibration periods
• Maintain accurate inspection records and support traceability requirements
• Support the Production Lead in daily shopfloor activities to meet production targets and schedules
• Assist in monitoring production flow and highlight any issues or delays to the Production Lead
• Provide guidance to operators when needed, especially on quality-related matters and work instructions
• Work closely with Engineering, and other teams to resolve production and quality issues

Requirements

• Good understanding of quality control and inspection processes in a manufacturing environment
• Hands-on experience with measuring tools and calibration; familiarity with Image Dimension Measurement Systems (eg, Keyence equipment) is a plus
• Able to read and interpret technical drawings
• Comfortable communicating in English (spoken and written)
• Diploma in Engineering, or at least 2 years of relevant experience in manufacturing, quality, or production
• Prior experience in a supervisory or team lead role is an advantage

Job Highlights:
Simple packing role in a production environment. Easy job scope with training provided. Suitable for candidates looking for stable day shift work.

Salary and Benefits:
• Gross salary up to $2.1k
• Stable day shift
• Long term temp position

Working Shift:

• Monday to Friday

• 8:00am – 5:45pm

Working Location:
• King Albert Park (Nearest MRT)

Key Responsibilities:
• Simple packing duties
• Perform basic quality checks
• Assist with other ad-hoc duties

Requirements:
• No experience required
• Able to follow instructions
• Comfortable with simple repetitive tasks

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical or Electrical Engineering
• Relevant experience would be advantageous
• Relevant internship / academic background would be considered

Work Arrangements (shuttle bus available)

• AM Shift (7AM to 430PM)
• PM Shift (4PM to 130AM) $25/shift allowance
• Mon - Fri / Tues - Sat / Sun - Thurs (shift patterns available)

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOL Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394 • EA Registration No. R1877971 (Derrick Tiew Yong Han)

Responsibilities

• Requires female to perform production line duties (labelling, tagging and scanning);
• Unpacking and repacking light items;
• Maintain speed and accuracy on the assembly line.

Required competencies and certifications

• Meticulous and able to work in a fast-paced environment;
• Demonstrate commitment to working overtime as required.

Preferred competencies and qualifications

• Open to applicants who are Singaporean or Malaysian.

Other information

• Location at 30 Pioneer Crescent;
• Working Hours from 8:00 AM – 5:30 PM, Monday to Friday;
• Overtime (OT) required on weekday evenings and/or weekends as and when necessary.

KEY DUTIES AND RESPONSIBILITES:

· Perform various activities and tasks requiredin the cream/gel production areas.

· Operate all relevant equipment, clean, assemble and maintain the cleanliness of the blending, tube filling and packing equipment.

· Perform and maintain the documentation of operations in accordance with cGMP requirement.

· Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

· Perform online monitoring of in process parameters / checks throughout the batch.

· Complete all relevant records and other documentation required for cream/gel production, maintenance and cleaning of equipment in the work area.

· Perform all activities in accordance with cGMP.

· Maintain the cleanliness of work area to ensure cGMP compliance.

· Perform all other relevant duties required to meet the schedule.

· Check relevant material and product details against batch document

· Co-ordination with Engineering for break down rectification of cream/gel equipment.

· Prepare draft for Cream/Gel Production SOP and Batch Manufacturing/Packaging Record.

· Participate in Engineering Batches for new product.

· Involve in equipment / process qualification.

· Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

· Ensure compliance to GxP / Safety / Quality policies.

· Undertake any other duties assigned by manager.

REQUIREMENT

· Good understanding of safe working practices and cGMP.

· Experience in cream/gel manufacturing and tube filling/packing is preferred.

· Prior experience in packaging serialization is a plus.

· A good team player with positive learning attitude.

· Willing to work in Tuas area, in cleanroom environment with full gowning.

· Able to commit to rotational shift.

EDUCATION & EXPERIENCE

· Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

· With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

· Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities

• Develop, implement, and maintain methods, operating sequences, and processes for the assemblies during start-up for semiconductor equipment.

• Lead the development and sustaining of field digitalized start-up procedures (iOMS) for Tier 0 & Tier 1 operations to improve efficiency and consistency.

• Allocate tasks to illustrators and oversee progress to ensure timely and high‑quality OMS & DOC deliverables.

• Manage BoM integrity across SHPK, MERG, ship-along, SRD, and other configuration sources, ensuring accuracy and alignment with product requirements.

• Drive automation initiatives to enhance work proficiency and reduce production and delivery cycle times.

• Reduce I&W (installation and warranty) costs by identifying and correcting BoM errors, improving procedures, and lowering field NCs and start-up cycle time through streamlined work processes.

• Review field NCs, analyze root causes, and work with corresponding teams develop action plans to prevent recurrence.

• Coordinate technical issues, RIT initiatives, and the introduction of new technologies and CIP projects (e.g., 3D OMS) across different business units and cross-functional teams.

• Work independently with limited documentation when needed, investigating and compiling data to recommend improvements using established reporting processes.

• Collaborate with cross-functional teams to drive complex projects related to quality issues, BoM optimization, and cost reduction.

• Interface with engineering teams to support the release of product improvements and new product instructions.

• Perform root cause analysis for issues arising during assembly and start-up phases.

• Support engineering change requests and partner with design and operations teams to implement changes efficiently for both new and existing products

Requirements

​Minimum Qualifications

• Bachelor’s degree in engineering.

• Minimum 4 years of experience working with semiconductor equipment in manufacturing or technical field service.

Technical Skills

• Hands-on experience with semiconductor process equipment; familiarity with any of the following is an advantage: MDP, EPI, ALD, CMP.

• Good understanding of mechanical, digitalization, and automation concepts, with the ability to read and interpret technical drawings and schematics.

• Good knowledge of system BoM structure, assembly processes, and procedure documentation.

• Proficiency with CAD software (e.g., SolidWorks), CAM tools (e.g., NX), SAP, and MS Office.
  

Professional Competencies

• Strong analytical and problem‑solving skills; able to evaluate information and make sound decisions.

• Ability to work effectively within standardized processes to meet objectives and deadlines.

• Excellent communication skills and the ability to collaborate with multiple stakeholders and cross-functional teams.

• Strong independent work ethic and accountability.

Other Requirements

• Able to work flexibly, including outside standard working hours, to collaborate with stakeholders across different time zones.

• Willingness to travel internationally to customer sites (approximately 10%).

Job Responsibilities including but not limited to:

• Conduct forecasting and planning of materials to ensure smooth production process
• Schedule and plan production activities based on job orders
• Monitor the lead time of producing the finished product
• Update and check inventory physical stock and arrange production of finished goods to meet the sales order
• Ensure production schedule meet the delivery date
• Liaise with suppliers for powder coating
• Troubleshoot discrepancies and quality issues

Requirements:

• Experience in aluminums working sector and manufacturing
• Able to lead team members on production and installation
• Have experience in working machineries
• Able to read technical and installation drawings
• Ensure products and install quality
• Planning of production schedules and allocate sufficient Manpower
• Implementation production processes and maximize efficiency and reduce production waste
• Implementing continuous process improvements
• Preparing material and equipment lists, PO, cost analyses and estimated cost
• Provide training staff for new production teams

❗❗❗SINGAPOREAN ONLY

✅Cleanroom Experience Needed

✅Experience in Foundry Wafer & Probe and IC preferred

DUTIES AND RESPONSIBILITIES

- Perform the printer, machine start-up.

- Wash and Sanitize the machine, record the CIP checklist.

- Coordinate with the mixologists.

- Operate the machine.

- Prepare the samples for retention and QC check.

- Record the Pre-operational checklists and Output.

- Report to Assistant Production Manager / Production Manager if there is machine / quality issue.

• Assist in production activities, packing, picking, handicraft processing.
• Able to work on the production line and meet production targets.
• Willing to learn how to operate machinery.
• Ensure products are manufactured according to specifications.
• Able to work overtime by company‘s arrangement.
• Training will be provided.