Total 176 job vacancies by Bosch Group

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

Job Summary
1.1 Physical logistic tasks of receiving, warehouse and shipping.
1.2 Interact with cross functional team within Plant and Bosch.
1.3 Interact with external parties – Logistics Service Providers, Liners etc.
1.4 Ensure the warehouse operates at peak efficiency, with customer satisfaction being the primary goal, by supervising, organizing, directing, and training warehouse employees and establishing, monitoring, and managing operation goals.

Job Scope
2.1 Responsible for the physical logistic tasks of receiving, warehousing, and shipping to ensure the quality objectives and delivery deadlines are met
2.2 Responsible for the accuracy of inventory with physical counts and reconciliation
2.3 Safeguards warehouse operations and contents by establishing and monitoring security procedures and protocols.
2.4 Ensure compliance with health and safety legislation
2.5 Manage overall LOM performance results with coaching, counseling, and disciplining associates, planning, monitoring, and appraising job results.
2.6 Achieve financial objectives and prepare annual budget, expenditures, analyze variances and corrective actions.
2.7 Lead and participate actively in Bosch Production System (BPS) related activities.
2.8 Support and prepare management reporting as and when necessary.
2.9 Any other duties assigned by the immediate superior from time to time.

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

End to End Hiring Process:

• Assist with various recruitment activities, including screening resumes, scheduling interviews, and coordinating with candidates.
• Support the development and refinement of recruitment-related templates to enhance efficiency. • Assist in ensuring a complete set of new hire documentation is gathered and submitted for HRS data and payroll processing.

Onboarding & Integration:

• Assist in employees onboarding program coordination with new hires and presenters from each department.

HR Administration & Compliance: 

• Assist in the processing and administration of LHDN (Lembaga Hasil Dalam Negeri / Inland Revenue Board of Malaysia) stamping for relevant documents, ensuring compliance with regulatory requirements. 
• Provide administrative support for various associate needs and inquiries.

Employee Engagement & Events: 

• Participate in the organization and coordination of company events, employee engagement activities, and career fait event.

Key Responsibilities

• Support cost analysis, simulations, and forecasting for various Human Resource cost centers to support the development of the Business Plan. 
• Assist in cross-charging activities and other related financial processes.
• Provide support on overall Country Human Resource topics, including Learning & Development and Resourcing initiatives.
• Support Human Resource digitalization projects, including data migration and process documentation.
• Identify and propose opportunities for process improvements and automation.
• Create engaging media content for recruitment, Human Resource events, and employer branding initiatives.
• Develop written materials, source compelling visual assets, and ensure alignment with Country Human Resource's overall communication strategy.

Project Involvement

• Support Human Resource policy research and development.
• Participate in Human Resource process improvement initiatives.
• Contribute to digitalization and automation of Human Resource processes.

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

We are seeking a dynamic and experienced Group Leader to join our team. In this pivotal role, you will be responsible for leading, coaching, and mentoring a team of associates, fostering their professional development and ensuring the highest levels of competence within the group. You will serve as a central point of contact and a stable "home base" for your team members 

Your primary responsibilities will include ensuring operational excellence, driving continuous improvement and implementing the strategic development of competencies within your team and for Bosch Semiconductor Penang as a whole. You will be in charge of resource allocation, including hiring new team members, and ensuring compliance and highest quality standards with all internal and external regulations.

As a Group Leader, you will act as a role model, embodying the "We LEAD Bosch" principles, and actively shape the competencies of your team to meet strategic demands.

1.Role                                                                                                                                                                       1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve
production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3.
1.2 Responsible for 1st level failure analysis of reject tools or components from production
line to identify process or supplier related issue for failures which are unable to be solve
by shopfloor leaders.
1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician.

2.Job Scope
2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.
2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose.
2.5 To perform daily complaint of raw material to PUQ and assist in scrap preparation if necessary.
2.6 To train and monitor repairers on daily rework activities.
2.7 To support Production in achieving the effectiveness/productivity, output, FOR and quality target.
2.8 To support and involve in BPS activities such as Point CIP projects, LLD, Change Over, TPM or process/product improvement.
2.9 To participate in all scraping audits, coordinate in providing and implementing corrective actions.
2.10 To prepare & submit the scrap form which need submitted daily scrap for management
approval.
2.12 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and
process meet the capability requirement during new product introduction and mass
production.
2.13 Support VSE/FPV in coordination of PDP project sample build (Pre-Pilot and Pilot run) on
material availability and jig and fixtures readiness.
2.14To assist the Process Engineer / Supervisor in the day-to-day operation.
2.15To support an acting as supervisor if Supervisor & LO no turn up.
2.16To carry out any other duties assigned by immediate superior time to time.

Key Duties and Responsibilities

1. To execute corrective measures with high efficiency whenever there is a breakdown and record down the clear definition of corrective actions in B-core CMMS.
2. To support machine product EWAK changeover or conversion activities to ensure changeover time range fulfill operation target setting.
3. To support module engineer for workstation and equipment setup and troubleshooting
4. To assist maintenance engineer achieve department goals and KPIs.
5. To attend all breakdowns promptly
6. To assist module engineer for fixture/tool modification and replacement.    
7. Support PM task base on real time condition required, planned schedule or manpower availability.
8. Maintain 5S in work area and comply with Bosch health and safety compliance
9. To support on any other section related duties assigned to current team.
10. Comply with safety ground rules and requirement to carry out the maintenance.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Perform all tasks assigned by the immediate superior in accordance to the specifications and schedule.
• Plan and organize use of resources effectively to meet OEE, productivity, internal failure cost target.
• Work with all levels of the organization to improve quality levels, providing customer with “Zero Defect Product” and “100% On-Time Delivery”.
• To translate the company’s objective into department goals and ensure the goals are cascaded to Production line leader and operator levels.
• Create an environment that is culturally embedded in a “Quality First” mentality.
• To maintain records for all downtime and to clinically analyze the lost opportunity for improvement.
• To initiate project, evaluation and study for capacity and quality improvement.
• To follow up and summarize the entire pilot builds failure into “OPEN POINT LIST”.
• Instill a continuous improvement mentality to production line leader and operator level.
• Establish performance indicators and evaluate production line leader and operator level.
• To Lead “CIP” production daily management meeting.
• To liaise with TEF group for improvement.
• To perform the production line process confirmation.
• To provide support and guidance to line leaders, technicians and operators on their daily tasks.
• To ensure production line leaders, technicians and operators follow quality control procedure and all the BPS activities and procedures.
• Review line leaders, technicians and operators performance on quarterly basic and provide Guidance to improve his/her performance.
• Coordinate and follow up various departments to ensure smooth execution day to day activities.
• Responsible for year end physical inventory count.
• Enforce safety and 5’S activity assigned by superior.
• To evaluated and prepared year end GPD for subordinates.
• Any other duties assigned by the immediate superior from time to time.

1. Ensure Maintenance Key Performance Indicators (KPIs) — including MTBF, MTTR and MWT — for production lines consistently meet or exceed set targets.
2. Execute all relevant activities to achieve departmental KPIs (S,Q,D,C), while driving continuous improvement through realistic goal setting in collaboration with the team.
3. Lead or support root cause analysis using structured methodologies such as Fishbone Diagram, Why- Why, Is/Is not analysis.
4. Ensure all maintenance-related content and documentation reflect the most current data and insights to support informed decision-making and continuous process optimization (PDCA, SPL, OCAP, PSS.PFMEA,CP)
5. Actively participate in Value Stream Daily Leadership Review (DLR) and MyKATA sessions to align with operational priorities and drive engagement.
6. Contribute meaningfully to Value Stream Continuous Improvement Projects (CIP) on a quarterly basis, supporting long-term performance enhancements.
7. Perform troubleshooting and repair of for equipment related issues involving mechanical, electrical and PLC automation systems
8. Collaborate closely with process owners and other stakeholders to resolve quality issues, technical issues and implement improvement initiatives effectively.
9. Train, coach, and develop technician technical know-how to independently and effectively handle assembly station troubleshooting and sustainment activities.
10. New project early involvement to evaluate equipment performance and TPM readiness with technical analysis for rational decision justification. Manage and ensure timely preparation and uploading of all maintenance-related manufacturing documents prior to operational release.
11. Participate actively in TEF departmental initiatives such as Lean After Lean, Digitalization and Automation Projects, and BPS-TPM activities.
12. Carry out any other duties as assigned by the immediate superior, ensuring flexibility and commitment to team and organizational goals.

• Continuous improvement of production test programs for automotive ICs on Automated Test Equipment (ATE)
• Support/lead tasks and projects from development to release for mass production
• Improve test programs for quality, test time and yield by modifying existing or introducing new test methods
• Modify or enhance corresponding test specifications
• Execute release activities to qualify modifications for production usage
• Collect and analyze data to secure test methods in full self-responsibility
• Cooperate with different development and production teams at various locations including both internal functions and external suppliers
• Transfer test techniques between different tester platforms or locations
• Special condition – If required, candidate must be willing to travel for Short Term Assignment (STA) with the duration of 6 months.

Key Responsibilities

• Act as Plant Product Owner for assigned product families from manufacturing stage through end-of-life (EOL).
• Serve as the main interface between Plant and Development for all product-related HW/SW issues.
• Drive First Pass Yield (FPY) performance and implement continuous improvement actions to meet targets.
• Lead root cause analysis and problem-solving activities for production and quality issues (e.g., FOR, field returns, 0km defects).
• Take ownership as Task Force Leader for critical product or process issues, coordinating cross-functional resources.
• Support failure analysis (FA) activities and collaborate with teams to define effective diagnostic tools.
• Transfer product know-how from development to plant during industrialization and ensure smooth product ramp-up.
• Participate in new product development (NPD) phases to incorporate plant lessons learned and prevent recurring issues.
• Provide technical risk assessments and decision justification for quality-related concerns.
• Lead and support cost improvement initiatives (e.g., RPP, IDC) to achieve plant and corporate targets.
• Develop and implement engineering and automation solutions to improve efficiency and reduce scrap.
• Ensure manufacturing readiness through line buy-off, release, and validation activities.
• Conduct technical training for production technicians and engineers.
• Collaborate with internal teams, contract manufacturers (CM), and stakeholders to achieve operational goals.
• Support data analysis and reporting (e.g., SQL queries, technical presentations) for management and customers.
• Provide support in sample builds, testing, and evaluation activities during early product phases.
• Perform additional duties as assigned by management.