Total 196 job vacancies in BAYAN LEPAS

BROAD  FUNCTIONS : 

• Lead a group of Equipment and Process Technicians
• Attend various Equipments and Process daily issue.
• Ensuring Preventive Maintenance schedule carry out by Technicians.
• Required excellent communication skills for various inter department communications
• Suggest and executive Continuous Improvement on equipments down time or improve operational efficiency.

RESPONSIBILITIES : 

• Attend various Daily Meeting. 2x per shift
• Work load assigning base on production schedule for various equipment.
• Respond to any escalation from technicians from unscheduled down time or process KPOV.
• Montitor and respond to QC escalation from Test’s KPOV.
• Respond and follow up on Quality Incidents on-hold and disposition.
• Responsible to Technicians career path planning and performance designation.
• Attend various training course for technical and soft skills.
• Become Emergency Response Team member
• Conduct Fire Drill Evacuation Exercise
• Involve Management System Audit

1.Role                                                                                                                                                                       1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve
production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3.
1.2 Responsible for 1st level failure analysis of reject tools or components from production
line to identify process or supplier related issue for failures which are unable to be solve
by shopfloor leaders.
1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician.

2.Job Scope
2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.
2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose.
2.5 To perform daily complaint of raw material to PUQ and assist in scrap preparation if necessary.
2.6 To train and monitor repairers on daily rework activities.
2.7 To support Production in achieving the effectiveness/productivity, output, FOR and quality target.
2.8 To support and involve in BPS activities such as Point CIP projects, LLD, Change Over, TPM or process/product improvement.
2.9 To participate in all scraping audits, coordinate in providing and implementing corrective actions.
2.10 To prepare & submit the scrap form which need submitted daily scrap for management
approval.
2.12 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and
process meet the capability requirement during new product introduction and mass
production.
2.13 Support VSE/FPV in coordination of PDP project sample build (Pre-Pilot and Pilot run) on
material availability and jig and fixtures readiness.
2.14To assist the Process Engineer / Supervisor in the day-to-day operation.
2.15To support an acting as supervisor if Supervisor & LO no turn up.
2.16To carry out any other duties assigned by immediate superior time to time.

• Understand product PLM systems and maintain databases with high accuracy (Agile / SCORE / Ariba).
• Develop monthly capacity forecast models for Penang, subcontractors, Dresden, and internalization.
• Prepare factory capacity plans to support revenue targets.
• Lead monthly gross margin improvement projects, including continuous capacity improvement and internalization to internal factories.
• Proactively identify capacity improvement opportunities and collaborate with cross‑functional teams to execute action plans.
• Perform on-the-job monitoring of bottleneck equipment to ensure revenue plans are met.
• Conduct time studies for all processes (Sort, Test, Backend).
• Perform labor resource studies, planning, and optimization.
• Manage internalization project transfers from REN Power and REN P&C.
• Prepare and support company project transfer activities.
• Support NPI (New Product Introduction) project bidding.
• Develop and review factory layouts using AutoCAD.
• Understand, monitor, and improve equipment OEE, including performance maintenance. 

Key Duties and Responsibilities

1. To execute corrective measures with high efficiency whenever there is a breakdown and record down the clear definition of corrective actions in B-core CMMS.
2. To support machine product EWAK changeover or conversion activities to ensure changeover time range fulfill operation target setting.
3. To support module engineer for workstation and equipment setup and troubleshooting
4. To assist maintenance engineer achieve department goals and KPIs.
5. To attend all breakdowns promptly
6. To assist module engineer for fixture/tool modification and replacement.    
7. Support PM task base on real time condition required, planned schedule or manpower availability.
8. Maintain 5S in work area and comply with Bosch health and safety compliance
9. To support on any other section related duties assigned to current team.
10. Comply with safety ground rules and requirement to carry out the maintenance.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Perform all tasks assigned by the immediate superior in accordance to the specifications and schedule.
• Plan and organize use of resources effectively to meet OEE, productivity, internal failure cost target.
• Work with all levels of the organization to improve quality levels, providing customer with “Zero Defect Product” and “100% On-Time Delivery”.
• To translate the company’s objective into department goals and ensure the goals are cascaded to Production line leader and operator levels.
• Create an environment that is culturally embedded in a “Quality First” mentality.
• To maintain records for all downtime and to clinically analyze the lost opportunity for improvement.
• To initiate project, evaluation and study for capacity and quality improvement.
• To follow up and summarize the entire pilot builds failure into “OPEN POINT LIST”.
• Instill a continuous improvement mentality to production line leader and operator level.
• Establish performance indicators and evaluate production line leader and operator level.
• To Lead “CIP” production daily management meeting.
• To liaise with TEF group for improvement.
• To perform the production line process confirmation.
• To provide support and guidance to line leaders, technicians and operators on their daily tasks.
• To ensure production line leaders, technicians and operators follow quality control procedure and all the BPS activities and procedures.
• Review line leaders, technicians and operators performance on quarterly basic and provide Guidance to improve his/her performance.
• Coordinate and follow up various departments to ensure smooth execution day to day activities.
• Responsible for year end physical inventory count.
• Enforce safety and 5’S activity assigned by superior.
• To evaluated and prepared year end GPD for subordinates.
• Any other duties assigned by the immediate superior from time to time.

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

Rewards and Benefits

• Attractive base salary and sales incentives
• Transportation Allowance and Fuel Card
• Comprehensive Insurance Plans for Surgical & Hospitalization, Term Life and Personal Accident
• Out-patient & Specialist Coverage
• Dental & Optical Coverage
• Additional Retirement benefits
• Staff Purchase Plans
• Mobile Phone and Smart work gadgets/ tools

You will be welcomed into a friendly, robust and competitive team that are highly motivated and focused on achieving goals and results. You will be given full product training, with hands on assistance from the Sales Manager and the Sales Team.

Equal Opportunities

Rentokil Initial believes in supporting all employees to provide equal opportunities and avoid discrimination. We also place emphasis on workplace diversity which means that we are serious about creating an inclusive environment that accepts each individual's differences, embraces their strengths and provides opportunities for all colleagues to achieve their full potential.

Locations:

Rentokil Initial (M) Sdn Bhd 

No. 1, Jalan Sungai Tiram 7, Taman Perusahaan Nyaman Mutiara, 11900 Bayan Lepas, Penang

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support ME and QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.

​​WHAT YOU’LL DO​​

As a Visual Merchandiser, you’ll play a key role in creating an inspiring and consistent customer experience by implementing visual standards and driving commercial excellence. Acting in line with our values, you’ll contribute to your success and that of the company.​

You will:​

• Execute visual, commercial, and styling curation in line with store guidelines and calendars to enhance the customer experience and drive sales in your store.​

• Analyse sales performance, maintain stock levels, ensure garment care and identify and prioritize visual and commercial opportunities in collaboration with Store Management.​

• Use your trend and competitor insights to coach and develop the store team, equipping them to deliver a great customer experience.​

• Represent yourself and the brand positively during all customer interactions.​

• Support Sales Market with store expansion projects.​

WHO YOU’LL WORK WITH​​

Our stores are the heart of our company, where customers experience our brand firsthand. As part of the dynamic Store Team, every role—from Sales Advisors, Department Managers, to Store Managers and Visual Merchandisers—contributes to creating an inspiring and welcoming environment. You’ll also connect with the wider Area Team, collaborating across stores to share insights and drive success together. ​

Alongside your team, you'll play a vital role in helping customers feel confident and express their individuality with the latest trends and timeless styles. By building meaningful connections with customers in our stores, we make fashion accessible and sustainable for all.​

​This role will be reporting to the Store Manager.​

WHO YOU ARE​​

We are looking for people with…​ ​

• Strong Visual merchandising and commercial experience in a dynamic environment, with a solution-oriented mindset.​

• Knowledge of how to manage, analyse and act on sales reports and the selling equation.​

And people who are…​​

• Passionate about fashion and delivering an exceptional in-store experience.​

• Motivated to create outstanding customer experiences while promoting and driving sales.​

• Creative, curious, and proactive.​

• Skilled communicators who can lead and inspire store teams to achieve collaborative results.​

• Flexible and action oriented.​

WHO WE ARE​​

H&M Group is a global company of strong fashion brands and ventures. Our goal is to prove that there is no compromise between exceptional design, affordable prices, and sustainable solutions. We want to liberate fashion for the many, and our customers are at the heart of every decision we make.​​

We are made up of thousands of passionate and talented colleagues united by our shared culture and values. Together, we want to use our power, our scale, and our knowledge to push the fashion industry towards a more inclusive and sustainable future. ​​

​​WHY YOU’LL LOVE WORKING HERE ​​
At H&M Group, we are proud to be a vibrant and welcoming company. We offer our colleagues attractive benefits with extensive development opportunities around the globe. ​​

• All our colleagues receive a global employee discount, usable on all our H&M Group brands in stores and online. Brands covered by the discount are H&M (Beauty and Move included), COS, Weekday, Monki, H&M HOME, & Other Stories, ARKET, Afound. In addition to our global employee discount, all our colleagues are included in our H&M Incentive Program – HIP.

• In addition to our global benefits, all our local markets offer different competitive perks and benefits. Please note that they may differ between employment type and countries.​ ​

JOIN US​​

Our uniqueness comes from a combination of many things – our inclusive and collaborative culture, our strong values, and opportunities for growth. But most of all, it’s our people who make us who we are.​​

Take the next step in your career together with us. The journey starts here.​​

If you feel that your experience, skills and ambitions are right for this role, please send your application in English as soon as possible, but no later than 8 May 2026. Due to data policies, we only accept applications through career page.​

*We are committed to a recruitment process that is fair, equitable, and based on competency. We therefore kindly ask you to not attach a cover letter in your application.​​

Primary Duties & Responsibilities

• Lead shift coordinators across Cleaning, Sputter, and Lube to ensure smooth operations.
• Review and prepare pass-down reports for incoming shifts.
• Act as backup to the Operations Manager when required.
• Conduct daily production meetings and deliver shift updates.
• Ensure strict compliance with rules, regulations, and SOPs.
• Plan and deploy manpower effectively to meet production needs, manage attendance and discipline, schedule overtime when required.
• Assist the Production Manager in executing daily operations and achieving production targets.
• Monitor machine utilization and line performance to meet output requirements.
• Escalate issues proactively to relevant PICs and management.
• Manage and clear over-WIP inventory, coordinate with Manufacturing Engineers on disposal of problematic lots.
• Perform MESA transactions, WIP tracking, and meet PI Count audit with zero discrepancy.
• Ensure compliance with IMS/RBA standards and maintain exemplary conduct.
• Lead line audits and enforce 7S housekeeping practices.
• Ensure products meet required quality, safety, and customer standards.
• Participate in FMEA, 8D, and SPC activities.
• Support cross-functional teams and take on additional operational responsibilities as needed.

1. Product Lead overseeing Media programs from qualification through mass production and end-of-life. Primary interface between internal cross-functional teams and external customers to deliver on-time product launches and production ramp readiness.
2. Leads new and iteration program qualifications, ensuring critical product parameters, specifications, and documentation are fully defined to support smooth qualification builds and volume ramps. Applies data-driven KPIV/KPOV analysis to improve process control, yield, and product margin.
3. Manages programs, including engineering sample logistics, shipment execution, head/media pairing, and supply planning to achieve optimal HDD yield. Drives continuous improvement initiatives with internal stakeholders and external partners (HDD) to ensure sustained product quality, margin, and operational excellence.

Are you a recent graduate passionate about electronics, testing, and problem-solving? We are looking for enthusiastic individuals to:

• Set up new products and enhance test strategies for existing products to improve test efficiency, yield, and production capacity.
• Support our QA team by analyzing customer failure samples and developing programs to prevent similar issues in the future.
• Train and guide technicians to streamline daily repair operations.
• Troubleshoot test boards and testers when IC failures occur, and implement permanent solutions.
• Ensure smooth operation of test stations by monitoring performance, stability, and robustness, and investigating any deviations.
• Gain hands-on experience with ATE tester platforms such as Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX, and LTX.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Product Engineering or Program Management
• Lead internal team for NPI and Sustaining Products qualification and continuous improvement activities to meet product requirements.
• Involve heavily in collaboration with other functions and departments to achieve goals.
• Data analysis skills for processes and products correlation.  

1. Ensure Maintenance Key Performance Indicators (KPIs) — including MTBF, MTTR and MWT — for production lines consistently meet or exceed set targets.
2. Execute all relevant activities to achieve departmental KPIs (S,Q,D,C), while driving continuous improvement through realistic goal setting in collaboration with the team.
3. Lead or support root cause analysis using structured methodologies such as Fishbone Diagram, Why- Why, Is/Is not analysis.
4. Ensure all maintenance-related content and documentation reflect the most current data and insights to support informed decision-making and continuous process optimization (PDCA, SPL, OCAP, PSS.PFMEA,CP)
5. Actively participate in Value Stream Daily Leadership Review (DLR) and MyKATA sessions to align with operational priorities and drive engagement.
6. Contribute meaningfully to Value Stream Continuous Improvement Projects (CIP) on a quarterly basis, supporting long-term performance enhancements.
7. Perform troubleshooting and repair of for equipment related issues involving mechanical, electrical and PLC automation systems
8. Collaborate closely with process owners and other stakeholders to resolve quality issues, technical issues and implement improvement initiatives effectively.
9. Train, coach, and develop technician technical know-how to independently and effectively handle assembly station troubleshooting and sustainment activities.
10. New project early involvement to evaluate equipment performance and TPM readiness with technical analysis for rational decision justification. Manage and ensure timely preparation and uploading of all maintenance-related manufacturing documents prior to operational release.
11. Participate actively in TEF departmental initiatives such as Lean After Lean, Digitalization and Automation Projects, and BPS-TPM activities.
12. Carry out any other duties as assigned by the immediate superior, ensuring flexibility and commitment to team and organizational goals.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support system comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.