Total 45 Full-time technician job vacancies in Penang

Job Responsibilities

• Carry out electrical wiring works including cable pulling, cable trunking, conduit installation, and termination
• Install and wire electrical components such as switches, circuit breaker panels, and distribution systems
• Perform wiring connections ensuring proper system compatibility, safety, and functionality
• Read and interpret electrical drawings, wiring schematics, and control diagrams
• Assist in installation, testing, commissioning, troubleshooting, and maintenance of electrical systems and control panels
• Support engineers during inspection, rectification, and site coordination work
• Ensure all electrical works comply with safety regulations, project specifications, and quality standards
• * Maintain tools, equipment, and ensure good housekeeping at work sites

Job Requirements

• Minimum 2 years of experience in electrical wiring, panel wiring, or industrial site installation
• Certificate, Diploma, or equivalent qualification in Electrical Engineering or related field
• Able to read and understand electrical drawings, control diagrams, and wiring schematics
• Responsible, disciplined, and able to work independently as well as in a team
• Good attitude, teamwork, and communication skills
• Familiarity with industrial electrical systems or automation-related work is an added advantage
• Committed to safety, quality, and proper documentation
• Willing to work on-site at buildings, factories, plants, or customer locations
• Perform ad-hoc technical duties as assigned by supervisor or management
• Full-time (Fresh graduates may apply / considered)

Benefits:

• Working Time: Mon - Sat - 830am - 500pm
• EPF
• Socso
• Medical Allowance
• Salary: Negotiable

Scope

Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Responsibility:

• Responsible for ensuring all works performed are according to WECSB’s Standard Operating Procedure.
• To carry out all indoor as well as outdoor servicing and repairing jobs and to visit site when necessary.
• To ensure all pumps & equipments which need servicing and repairing are properly labelled, tagged and stored in allocated space.
• To work closely with sales and other departments to ensure all service and repairing jobs are completed as scheduled.
• To complete all service reports within stipulated time frame.
• To keep all service and repair jobs documentation in proper order.
• To ensure all in-house tools are properly maintained and proper housekeeping is being practiced in workshop at all times.
• To learn and improve on company’s product knowledge from time to time.
• Such other related duties as the management may direct.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Penang, Butterworth
• • Able to start work immediately will be an advantage.

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

Requirements:

• Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper, micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF, Socso & EIS
• Personal development opportunities
• Remote work flexibility

工作職責

• 進行電氣線路施工，包括電纜敷設、線槽鋪設、導管安裝和端接。
• 安裝和連接電氣元件，例如開關、斷路器面板和配電系統。
• 進行線路連接，確保系統相容性、安全性和功能性。
• 能夠閱讀和理解電氣圖、接線圖和控制圖。
• 協助進行電氣系統和控制面板的安裝、測試、調試、故障排除和維護。
• 在檢查、整改和現場協調工作期間為工程師提供支持
• 確保所有電氣工程均符合安全規章、工程規範和品質標準。
• * 維護工具和設備，並確保工作場所的良好衛生狀況

職位要求

• 至少兩年電氣佈線、配電盤佈線或工業現場安裝經驗
• 能夠閱讀和理解電氣圖紙、控制圖和接線圖
• 責任心強，自律性高，既能獨立工作也能團隊合作。
• 良好的態度、團隊合作精神和溝通能力
• 熟悉工業電氣系統或自動化相關工作者優先考慮。
• 致力於安全、品質和規範的文檔記錄。
• 願意在建築物、工廠、車間或客戶現場工作
• 根據主管或管理階層的安排，執行臨時性技術任務。

好處

• 僱員公積金/社險
• 醫療津貼
• 年假
• 病假

工作細節

1. 工作時間：週一至週六，上午 8:30 至下午 5:00
2. 工作地點: Khean Huat Electrical Sdn Bhd, Bandar Perda, Bukit Mertajam, Penang
3. 教育背景：電機工程或相關領域的證書、文憑或同等學歷
4. 職位類型：全職（應屆畢業生亦可申請/考慮）
5. 薪資：面議

範圍

負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

責任：

• 負責確保所有工作均按照 WECSB 的標準作業程序進行。
• 負責所有室內外維修保養工作，並視需要到現場進行勘察。
• 確保所有需要維修保養的幫浦和設備都貼上正確的標籤，並存放在指定空間內。
• 與銷售和其他部門密切合作，確保所有服務和維修工作按計劃完成。
• 在規定的時間內完成所有服務報告。
• 妥善保管所有維修保養工作的相關文件。
• 確保所有內部工具都得到妥善維護，並始終在車間內保持良好的衛生習慣。
• 不斷學習並提升公司產品知識。
• 管理層可能指示的其他相關職責。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：檳城，北海
• • 能夠立即開始工作者優先考慮。

我們歡迎任何與CNC工具機製造相關的職位申請。

職責：

• 根據提供的圖紙，設定獨立機器並進行偏移調整。

要求：

• 不一定要持有文憑/學士學位等證書或經驗，但如有則優先考慮。
• 相關工作經驗者優先考慮。
• 語言能力強，英語和馬來語書面及口語表達能力俱佳。
• 了解遊標卡尺、千分尺和千分錶等基本測量工具。
• 積極主動、樂於學習、勤奮努力、以結果為導向，並具備團隊合作精神。
• 良好的溝通和人際交往能力。
• 能夠獨立工作。
• 我們將提供培訓。
• 如果您能夠獨立進行程式設計和設置，我們可以進一步討論薪資待遇。
• 歡迎應屆畢業生申請。

福利待遇

• 津貼（旅費、交通費等）
• 出席福利
• 個人休假
• 小組診所
• 僱員公積金 (EPF)、社保 (Socso) 和就業保險計劃 (EIS)
• 個人發展機會
• 遠距辦公的彈性

我們歡迎任何與CNC工具機製造相關的職位申請。

職責：

• 根據提供的圖紙，設定獨立機器並進行偏移調整。

要求：

• 不一定要持有文憑/學士學位等證書或經驗，但如有則優先考慮。
• 相關工作經驗者優先考慮。
• 語言能力強，英語和馬來語書面及口語表達能力俱佳。
• 了解遊標卡尺、千分尺和千分錶等基本測量工具。
• 積極主動、樂於學習、勤奮努力、以結果為導向，並具備團隊合作精神。
• 良好的溝通和人際交往能力。
• 能夠獨立工作。
• 我們將提供培訓。
• 如果您能夠獨立進行程式設計和設置，我們可以進一步討論薪資待遇。
• 歡迎應屆畢業生申請。

福利待遇

• 津貼（旅費、交通費等）
• 出席福利
• 個人休假
• 小組診所
• 僱員公積金 (EPF)、社保 (Socso) 和就業保險計劃 (EIS)
• 個人發展機會
• 遠距辦公的彈性

職責：

• 操作、維護和排除工廠公用設施系統的故障，包括電力分配、壓縮空氣系統、冷凍水和冷卻系統、暖通空調、氣體供應、洗滌器系統和廢水處理廠 (WWTP) 設備。
• 進行水樣採集和基本實驗室測試（例如，pH值、COD、BOD、TSS），分析結果，並根據需要調整化學投加量，以確保符合標準。
• 確保生產線和關鍵設備公用設施的穩定持續供應。
• 監控公用設施運作並識別異常情況，以防止生產停機。
• 依主管安排，執行一般維護和雜務任務。
• 對所有設施和公用設備執行預防性維護（PM）活動。
• 在盡量減少對生產幹擾的情況下，進行故障排除和糾正性維修。
• 找出反覆出現的問題，並支持根本原因分析和糾正措施的實施。
• 在生產時間內提供現場技術支援。
• 對任何影響生產的設施相關問題及時作出反應。
• 從設施角度協助機器安裝、搬遷和調試。
• 確保符合環境、健康與安全、消防安全和監管要求。
• 遵守停機/啟動程序、工作許可製度和承包商安全準則。
• 支援內部稽核、客戶審計和監管檢查。
• 參與緊急應變情況（例如，停電、瓦斯外洩、火警、漏水）。
• 準確記錄維護情況、故障報告和公用事業消耗。
• 支持 5S 管理實踐，保持設施區域的良好衛生狀況。
• 為設施相關的緊急情況提供隨叫隨到或輪班支援。
• 執行公司指派的其他任何任務。

要求：

• 工程專業（電氣、機械、機電一體化或相關領域）最低文憑或證書。
• 至少有 1-3 年工廠設施、公用設施或維護環境的工作經驗。
• 具備電力分配、暖通空調、壓縮空氣、冷凍水和廢水處理系統等設施系統的基本知識。
• 具備對設備進行基本故障排除和維護的能力。
• 熟悉預防性維護（PM）措施和安全規程。
• 了解 EHS（環境、健康與安全）要求和監管標準者優先考慮。
• 能夠適應快節奏的製造環境並滿足生產需求。
• 願意在需要時輪班工作、隨叫隨到或在緊急情況下工作。
• 良好的團隊合作、溝通和解決問題的能力。
• 責任感強，自律性高，能夠在極少監督下獨立工作。

福利待遇

• 津貼
• 醫療保險
• 開放文化

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

• To support production on rotating shift and performing preventive maintenance, repairs, troubleshooting on equipment & machinery and do method solving & problem on machines at production lines.
• Conduct basic Repair / troubleshoot machines problem at production line with assist from Technicians 2, 3 or 4.
• Assists in the installation of new equipment and machines.
• To create, execute & update Preventive Maintenance, Autonomous Maintenance for line equipment, machines, and jig/fixtures according to Master Schedule List per Standard defined.
• To liaise with Maintenance Section or Engineer for maintenance plan and spare parts Availability/replacement/controlling.
• Work with Technicians 1, 2, 3 & 4, Engineer / Supervisor in the day-to-day operation.
• Performs routine maintenance tasks, such as cleaning, lubricating, and replacing parts.
• Documents work performed and preventive maintenance records.
• Carry out any other duties assigned by technicians 3 or 4 and direct superior from time to time.
• To provide verbal & written communication on equipment downtime, improvement, and document it for future reference.
• To ensure the design and the utilization of the machines & equipment are made according with all the Safety features / regulation.
• To ensure 5s is being carried out at workplace and follow Safety Rules & Regulation during work being carried out.
• Spare parts arrangement.
• To support Ad Hoc tasks assigned by direct superior from time to time.

Role Description:  

• Responsible for providing professional maintenance, inspection, troubleshooting, and repair services 
for industrial cranes and hoists. This role plays a critical part in ensuring customer equipment operates 
safely, reliably, and efficiently, while representing the Konecranes brand with strong technical expertise 
and customer service. Perform preventive maintenance not requiring compliance inspections, 
corrective maintenance, retrofits, crane installation or commissioning. Technicians can be further 
classified into "Maintenance Technician" or "Inspector" (i.e. those predominantly performing preventive 
maintenance) and "Service Technicians" (i.e. those predominantly performing maintenance and 
retrofits).  

Key Tasks :  
 
• Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, 
   and related lifting equipment at customer sites. 
• Diagnose mechanical, electrical, and control system faults and implement corrective actions. 
• Carry out load testing, adjustments, calibrations, and commissioning of crane systems as per company 
   standards and safety requirements. 
• Complete service reports, job documentation, and recommendations for customers accurately and on 
   time. 
• Provide technical support and professional advice to customers regarding equipment condition, safety 
   risks, and service solutions. 
• Ensure all work complies with Konecranes safety policies, ISO standards, and statutory regulations. 
• Support emergency call-outs and breakdown service as required. 
• Collaborate with the Service team to improve service delivery, technical skills, and customer 
   satisfaction. 
• Maintain company tools, service vehicle, and equipment in safe and proper working order.

Awareness of ISO 14001 and 45001 standards

• Attend to and troubleshoot test equipment issues during equipment downtime and low-yield situations.
• Set up and configure test equipment for production runs, including handler conversions and load board changes.
• Perform PCB board debugging and repair when test hardware fails during testing.
• Maintain good housekeeping practices and comply with all company and departmental safety rules, regulations, and disciplinary standards.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead daily sustaining activities for Sputter equipment to ensure high equipment uptime and optimal performance.
• Support Engineers to monitor and drive continuous improvement on key KPIs such as OEE, MTBF, MTTR, Unscheduled downtime and PM effectiveness.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.
• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Lead problem-solving sessions and provide technical guidance to junior technicians.
• Participate in spare parts review, critical spare strategy, and cost optimization initiatives.
• Ensure safety protocols and cleanroom discipline are strictly followed during maintenance activities.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.