Total 2,823 Senior Executive software test engineer job vacancies in Australia

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead electrical design for semiconductor construction projects
• Develop power distribution, lighting, grounding, and earthing systems
• Perform load calculations, cable sizing, and equipment selection
• Prepare and review electrical schematics, layouts, and drawings
• Coordinate electrical design with mechanical, cleanroom, and process teams
• Review shop drawings and technical submissions
• Support installation, testing, and commissioning of electrical systems
• Liaise with clients, consultants, and contractors
• Ensure compliance with BCA, EMA, WSH, and relevant electrical codes
• Guide and mentor junior engineers
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Electrical Engineering or related field
• Minimum 5 years of electrical design experience, preferably in semiconductor or industrial projects
• Strong knowledge of power systems and electrical codes
• Proficient in AutoCAD, Revit, or electrical design software
• Good coordination, leadership, and troubleshooting skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

Our client is a multinational company in the Contract Manufacturing industry. Due to their current expansion plan, they are looking for an Manufacturing Engineering Lead to join their Engineer team, in hopes of developing the current high performing team. They are located in the North – easily accessible.

The Manufacturing Engineering Lead's responsibles are:

• Provide technical leadership and support for molding, assembly, or automation processes, including troubleshooting complex production issues.
• Apply scientific molding and structured problem-solving methods to improve process stability, yield, and overall manufacturing performance.
• Lead root cause investigations and implement corrective and preventive actions to reduce defects, scrap, and rework.
• Manage process validations (IQ, OQ, PQ), tooling trials, and Engineering Change Notifications (ECN) to ensure smooth implementation of product or process changes.
• Drive continuous improvement initiatives to enhance OEE, optimize cycle time, and improve cost efficiency through lean and automation practices.
• Collaborate with cross-functional teams, suppliers, and customers on technical clarifications, process improvements, and compliance with quality and regulatory standards (e.g., ISO 13485, FDA QSR).

Requirement

• Minimum 5 years of manufacturing engineering experience in Molding industry
• Diploma / Degree in Engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

We are looking for a Senior Associate Engineer to support the operations, maintenance, and reliability of critical submarine cable systems and cable landing station facilities. This role plays a key part in ensuring network availability, service continuity, and the successful delivery of colocation and interconnection services.

The ideal candidate is technically inclined, hands-on, and eager to work in a mission-critical telecommunications environment.

Key Responsibilities

• Operate, maintain, and support submarine cable communication systems and telecommunications equipment.
• Perform testing, implementation, troubleshooting, and fault diagnosis of submarine cable transmission systems and associated infrastructure.
• Develop, maintain, and enhance operational procedures for cable station operations, colocation facilities, and interconnection services.
• Support fault localization, repair coordination, and restoration activities for submarine cable systems.
• Assist in the implementation and maintenance of mechanical & electrical (M&E), building facilities, and outside plant infrastructure within the cable station.
• Coordinate and support submarine cable installation, commissioning, maintenance, and repair projects.
• Manage equipment room facilities, including floor space planning, power allocation, and infrastructure utilization.
• Support colocation projects and ensure customer interconnection requests are delivered within agreed timelines.
• Perform cabling, fiber patching, testing, and troubleshooting activities within the cable station.
• Manage site access and security requirements for customers, contractors, and vendors.
• Maintain accurate documentation of cable systems, facilities, test equipment, spare inventory, and customer infrastructure.
• Assist in site surveys, inspections, installation, and commissioning activities for submarine cable and equipment room projects.
• Represent the organization onboard vessels during submarine cable deployment, maintenance, or repair activities when required.
• Participate in a 24/7 standby and on-call support roster to ensure operational continuity.

Requirements

• Diploma in Electrical Engineering, Electronics Engineering, Telecommunications Engineering, or a related discipline.
• Fresh graduates are encouraged to apply. Candidates with relevant experience in telecommunications, network operations, infrastructure, or data center environments are also welcome.
• Strong analytical, troubleshooting, and problem-solving skills.
• Good understanding of system testing, implementation, and maintenance activities.
• Strong organizational and coordination skills with the ability to manage multiple priorities.
• Self-motivated team player who can work independently and collaboratively.
• Willingness to perform shift work and participate in a 24/7 standby and on-call support rotation.

Preferred Qualifications

• Experience in telecommunications networks, fiber optic systems, submarine cable systems, or critical infrastructure environments.
• Exposure to cable landing stations, data centers, colocation facilities, or network operations environments.
• Basic project coordination or project management experience is advantageous.

We are seeking an experienced Fullstack Engineer to design, develop, and maintain scalable, cloud-native applications. The ideal candidate has a strong background in both frontend and backend development, hands-on experience with AWS, and a solid understanding of modern application architecture, including microservices and serverless designs.

Key Responsibilities
• Design, develop, test, and maintain fullstack applications with high reliability and performance
• Build and manage cloud-based solutions on AWS, leveraging services such as EC2, S3, Lambda, RDS, and DynamoDB
• Develop and maintain RESTful APIs and microservices for distributed systems
• Implement serverless and cloud-native architectures following best practices
• Collaborate with cross-functional teams including product managers, designers, and DevOps engineers
• Ensure application security, scalability, and performance through proper AWS networking, IAM, and security configurations
• Participate in code reviews, mentoring, and continuous improvement of engineering practices

Requirements
• At least 7 years of hands-on experience in fullstack software development
• Strong proficiency in one or more backend programming languages: Python, Java, or Node.js
• Solid experience with AWS services, including:
o EC2, S3, Lambda
o RDS and DynamoDB
• Strong understanding of cloud architecture, serverless design, and distributed systems
• Experience developing and consuming APIs in a microservices environment
• Proficiency with Git or similar version control systems
• Hands-on experience with containerization tools, especially Docker
• Good understanding of AWS networking, security best practices, and IAM

Nice to Have
• Experience with CI/CD pipelines and DevOps practices
• Familiarity with frontend frameworks such as React, Angular, or Vue
• Experience with Infrastructure as Code (e.g., Terraform, CloudFormation)
• Exposure to Agile or Scrum development environments

What We Offer
• Opportunity to work on scalable, modern cloud-based systems
• Collaborative and innovative engineering culture
• Career growth and learning opportunities

If you are passionate about building robust fullstack solutions and working with modern cloud technologies, we would love to hear from you.

• Well Established Company (System Integrator – Engineering Solution Provider)

• Salary Range: $4500 to $6500 + AWS + VB

• Excellent Welfare and Benefits + Career progression

• Working location: North-east

• Working hours: 8:30am – 5:30pm (Monday to Friday)
  

Responsibilities:

• System configuration, administration and maintenance support

• Provide technical proposals and deliver with quality standards and deadlines

• Provide technical guidance and expertise to the team, assisting with problem-solving and decision-making

• Participate in Cybersecurity Risk Assessment, hardening and VAPT (Vulnerability Assessment and Penetration Testing)

• Setup and configure for Network, Firewall and Switches

• Perform system cybersecurity hardening, verification and cybersecurity assessment test and VAPT
  

Requirements:

• Degree in Computer Science, Information Technology, Cybersecurity Operation or relevant disciplines

• Proficient with Cybersecurity principles

• Good understanding of cybersecurity hardening methodologies. scripting and tools

• Be familiar with Windows/Linux OS and have hands-on experience with Windows/Linux OS hardening and MS SQL Server hardening\

• Has knowledge in TCP/IP network switch and routing, CCNA, CISSP, Security+, CISA certified will be a plus
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Assist and report to the Project Manager at site.
• Ensure that the works are carried out according to the approved drawings and compliances to Authorities’ requirements, quality procedures and EHS requirements.
• Coordinate and work with Consultant, Sub-Contractor and team member for smooth completion of work.

EA Licence No. 16C7962

Responsibilities:

• Infrastructure & Automation: Architect, deploy, and maintain scalable cloud infrastructure using Infrastructure as Code (IaC) methodologies.
• CI/CD Pipelines: Develop and optimize automated pipelines for testing, deployment, and release management.
• Monitoring & Reliability: Implement observability frameworks, including monitoring, logging, and alerting, to ensure system performance and uptime.
• Security & Compliance: Apply cloud security best practices, manage access controls, and maintain compliance across all environments.
• Cross-Functional Collaboration: Work closely with backend, frontend, and product teams to enable smooth deployments and reliable operations.
• Process Improvement & Mentorship: Enhance DevOps workflows, promote best practices, and mentor junior engineers.

Qualifications:

• 5+ years’ experience in DevOps or SRE, with strong skills in cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes).
• Hands-on with Infrastructure as Code (Terraform, Ansible, Helm) and CI/CD tools (Jenkins, GitHub Actions, GitLab CI/CD, ArgoCD).
• Solid Linux administration, networking, and distributed systems knowledge.
• Experienced in monitoring and observability using Prometheus, Grafana, ELK/EFK, Datadog, etc.
• Skilled in automation and scripting (Python, Go, Bash) to improve system reliability and performance.
• Designs secure, scalable, fault-tolerant infrastructure with disaster recovery planning.
• Strong collaboration, ownership, and communication skills, able to mentor teams and convey technical concepts to technical and non-technical stakeholders.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

What you will do:

The Senior Application Engineer is responsible for technical support – primarily customer quotations and business development case studies for various composite applications. Key emphasis will be on the ability to understand customer requirements and rapidly demonstrate how composite based solutions can be utilized to provide solutions with costing, timing, and resources included in the proposals. This position will require travel with the business development team to customer facilities during visits to discuss these future opportunities in depth.

How you will do it:

• Provides customer support by responding to requests for technical queries with detailed analysis of building management system, schedule of creation, tooling costing, and submittal of design and process improvements, when applicable, to meet all customer product needs.

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.

• ·Provides product technical engineering information by creating and giving presentations on customer proposals. This contains, but is not limited to, 3D representations of finished goods, 3D representations of tooling, etc.

• ·Prepares cost estimates by studying blueprints, plans, and related customer documents; consulting with engineers, and other professional and technical personnel.

• Conceptual design of composite components and assemblies to support proposals

• Generate solid and surface component and assembly CAD models

• Ability to compose detailed bill of materials for proposals

• Work as part of a team of design and engineering and ops staff

• Knowledge of ACMV and controls associate with Johnson Control Metasys will be an advantage

What we look for:

• Bachelor's Degree in Process & Instrumentation Engineering, Electrical Engineering with minimum 1 year relevant working experience

• Possess knowledge in PLC programming. Pcvue or ICONICS software

• Transportation composite or other composite experience preferred

• Willing to learn new things

• Location: Woodland
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM –12:30 PM)
• Willingness to commit to extended hours & night shift

Job Responsibilities

• Lead the development and review of mechanical designs, schematics, and layouts for HVAC, ultra-pure water (UPW), cleanroom ventilation, process piping, and specialty gas distribution systems.
• Perform and validate complex load calculations, equipment sizing, system modelling, and material selection to meet stringent semiconductor facility requirements.
• Provide technical oversight for thermal management, vibration control, and contamination-prevention strategies in cleanroom and sub-fab environments.
• Lead and supervise installation works for pumps, compressors, heat exchangers, cooling towers, and mechanical utility systems, ensuring compliance with design intent and quality standards.
• Coordinate closely with civil, electrical, process, and tool-installation teams to ensure seamless integration of all mechanical systems.
• Ensure strict adherence to cleanroom protocols and contamination-control requirements during construction and installation.
• Troubleshoot complex mechanical system issues and provide engineering solutions during commissioning, start-up, and qualification stages.
• Manage and oversee vendor and contractor performance, ensuring timely delivery, quality workmanship, and alignment with project milestones.
• Ensure compliance with BCA codes, WSH regulations, NEA requirements, and relevant SEMI/ASHRAE/ISO standards.
• Review and approve mechanical method statements, shop drawings, material submissions, testing procedures, and commissioning documentation.
• Any ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Mechanical Engineering or equivalent.
• Minimum 5–8 years of relevant experience in semiconductor wafer fabs, cleanrooms, data centres, pharmaceutical plants, or complex industrial facilities.
• Strong expertise in HVAC, process piping, UPW, specialty gas, and mechanical utility systems.
• Proficiency in AutoCAD, SolidWorks, Revit, or similar mechanical design and modelling software.
• Strong knowledge of SEMI standards, ASHRAE cleanroom guidelines, and ISO 14644.
• Solid understanding of thermodynamics, fluid mechanics, system integration, and mechanical safety engineering.
• Proven ability to lead coordination with multidisciplinary teams and manage contractors effectively.
• Strong problem-solving skills with the ability to resolve complex technical issues independently.
• Must be able to communicate in Mandarin to be able to liaise with Mandarin speaking associates

• Responsible for piping layout and engineering related activity not limited to Pipe and Pipe support design, Piping Material Handling activity,Piping Material Engineering activities like MTO (bulks, manual valves, SP items, Pipe Support), Requisitions, Supplier drawings review, Pipe Stress Analysis activities like preparation of stress critical line list, analysis using Caesar II, report preparation, Spring data sheet preparation, supplier drawing reviews, pipe isometric and pipe support checking, piping line listpreparation etc
• Coordinate on project specific issues with the respective subject specialist Lead
• Be responsible for the technical integrity for compliance to project HSE requirements relevant to the scope of work.
• Work closely with the piping lead / subject specialist lead of the project to understand their requirements and address on time. Develop reports as required by the lead.
• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to subject specific lead for quick resolution.Plan tasks and issue the deliverables as per company procedures.
• Issue of discipline deliverables in project specific templates.
• Be familiar with the workflows in the project. Taking initiative and provide any input to the Piping Lead / Subject specialist lead on time and highlight in advance if there are any technical challenges.
• Coordinate actively with other offices, for the projects being executed from multiple locations, attend meetings, and communicate effectively.
• Review and provide technical inputs as required by the Project.
• Based on the client specifications, follow project specific procedure related to Piping Layout and Engineering.
• Be responsible for the deliverables and to ensure that the design complies with the specification, integrity, and quality requirements of the project.
• Be responsible in finalization piping systems requirements such as, PED and testing requirements of NDT, hydro and pneumatic in line with the project requirements.
• Be responsible to procurement support for the Piping components, the activities vary from finalization of MTO, placing purchase orders in the systems, valuation of technical offers from the suppliers and ensuring the timely delivery with full project compliance.
• Be responsible for and manage the technical interfaces with equipment and package suppliers, as appropriate, to ensure compliance to Standards &Project Specifications
• Provide technical support to the project to obtain necessary approvals from the verification body / classification society or other applicable approving authorities.
• Represent Piping Discipline in meetings, discussions, audits, verifications, workshops, and technical reviews that relates to piping and be responsible for closeout of actions identified as required.
• Be responsible to align to the progress of Piping Engineering scope and internal and supplier deliverables, where applicable, as per the schedule of the project.
• Be responsible for Management of change within the scope of work for the Piping Discipline on assigned projects.
• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to piping material lead for quick resolution.Plan tasks and issue the deliverables as per company procedures.
• Issue of discipline deliverables in project specific templates.

Work Experience

• Must have a minimum of 12 years of experience having worked in an engineering setup for upstream oil & gas projects (platforms & FPSO projects) serving in the capacity of a Senior Piping Engineer.
• Experience in Software usage for Piping material quantity estimate, Procurement planning, CaesarII, E3D, Navis etc. material traceability and delivery to site.
• Experience in Norwegian projects and applicants experience tothe relevant standards, NCS and UKCS sectors preferred.
• Must have had prior work experience with medium/large sized brownfield and green field projects in the Oil and Gas sector with similar roles and possess an excellent understanding of project phases, milestones, and deliverables.
• Must have in-depth knowledge in Piping and cost-effectiveness, with a proven track record on projects in the upstream oil and gas sector.
• Must possess a thorough understanding and knowledgeof oil and natural gas industry standards suchas, but not limited to, ASME, API (American Petroleum Institute),BS, European Regulations and other relevant standards and guidelines.
• Experience in FPSO projects and HPHT services preferred.

Qualifications

• Must have a minimum bachelor’s degree in mechanical / Material Engineering or other equivalent engineering specialisation.

Other Skills

• Must possess design experience with respect to typical Piping Engineering deliverables, such as, specifications, data sheets (bulks, valves, SP items), MTO, TQ, TBA, Stress critical line list, Stressreports, Isometrics, Pipe Support Drawings, Piping Lists, and Supplier Drawing Reviews.
• Must have excellent technical communication (oraland written) skills with proven ability to present technical issues to designteams, client technical authorities, and client’s project managementrepresentatives and approving bodies.
• Must be a self-starter and be able to work withminimal supervision, make sound decisions, take independent action, analyseproblems, and provide focused solutions to assigned projects.
• Shall possess strong inter-personal andcommunication skills and be able to work well with people at all levels in theorganization.
• Have used common business software applications such as MS Office, MS Excel, Caesar II.
• Must be familiar with using Navisworks

We regret only short listed candidates will be notified.

JOB DESCRIPTION

Ride on the wave of Industry 4.0! Join STYL Solutions in the forefront of using Fintech and IoT technologies for smart city/nation transformation.

Headquartered in Singapore with R&D center in Vietnam, STYL Solutions designs, develops and supplies hardware, software and integrated solutions for applications in payment, loyalty management, location tracking, self-service operation, telemetry. Our market segment coverage extends from financial services, retail, mass transit, education to social services markets in Singapore and South Asia Pacific.

Our vision is to use Fintech and IoT to create smart and efficient cities that enhances Quality of Life through convenience and healthier living.

JOB RESPONSIBILITIES

• Handle quality issues arising from market feedback by collaborating closely with factories, suppliers, and engineering teams to identify root causes and drive technical or design-related improvements.
• Lead the investigation and analysis of product and component quality problems; conduct root cause analysis and propose effective Corrective and Preventive Actions (CAPA).
• Track and ensure the timely implementation and proper closure of CAPAs through cross-functional collaboration.
• Oversee management of non-conforming parts and coordinate with suppliers to implement corrective quality improvements.
• Review and assess assembly factory process work instructions, inspection protocols, and test plans for compliance with regulatory standards and customer requirements.
• Support and conduct on-site audits, and follow up on continuous improvement initiatives.
• Prepare quality plans, inspection standards, and documentation to meet client and project-specific quality requirements.
• Define and develop appropriate test methodologies and inspection criteria based on product design and manufacturing processes.
• Compile and deliver failure analysis (FA) reports to customers, including detailed root cause findings and recommended corrective actions.
• Apply quality tools (e.g., QC 7 tools, Pareto Chart, Fishbone Diagram, 5 Whys, PDCA Cycle) for structured problem-solving and trend analysis.
• Maintain accurate and comprehensive quality records and reports to ensure traceability, compliance, and process stability.

JOB REQUIREMENTS

• Degree in Engineering or related field, preferably in Electronics, Mechatronics.
• Minimum 5~10 years of experience in Quality or Process Engineering in a manufacturing environment.
• Strong knowledge of quality systems, tools, and methodologies, including 8D, Fishbone, Pareto, 5 Whys, and PDCA.
• Hands-on experience in component quality control—electronics, electromechanical parts, plastics, or metals.
• Ability to read technical drawings and define inspection standards.
• Proficient in MS Office and basic data analysis; capable of using statistical methods to interpret quality trends.
• Strong analytical and organizational skills; attention to detail with a results-oriented mindset.
• Effective verbal and written communication skills in both English and Chinese (to handle our Chinese supplies/ vendors) is preferred.
• Capable of preparing technical reports and communicating with internal and external stakeholders.
• Experience working with ISO management systems is preferred.
• Reliable, trustworthy, and willing to engage directly in on-site problem solving.

Job Description:

• Provide application support to achieve the Critical Dimension Scanning Electron Microscopes (CD-SEM) performance required by the customer which includes creation of measurement recipes and optimization of measurement conditions.
• Analyze, interpret, and present application results to customers, providing technical recommendations.
• Provide expert guidance to customers in the creation, optimization, and deployment of CD-SEM recipes at their sites.
• Examine solutions for measurement challenges in cutting-edge semiconductor devices, and propose optimized conditions, additional tool adjustments, and new applications.
• Investigate the root cause of any measurement issues on the CD-SEM and implement counter measures in collaboration with related departments mainly located in Japan.
• Conduct applications training for customers and engineers

Requirements:
• Possess over 7 years of professional experience as an Application Engineer specializing in Critical Dimension Scanning Electron Microscopes (CD‑SEM).

• Comfortable working with problem-based situation, equipped with problem solving skills and capable of handling sudden situations.

• Comfortable working in cleanroom environment when needed

• Ability to work independently as well as in a team.

• Possess effective verbal and written communication skills, enabling clear technical discussions with customers and internal stakeholders.

·      Willing and able to travel frequently, including on short notice, to support customer sites and business requirements.

About the Role

We are looking for a Senior Cybersecurity Engineer to work across two fronts: protecting our own systems, data, and customers, and delivering security projects for our clients. You will design and build security controls across multi-cloud environments (AWS and Azure), lead incident response, and partner with engineering teams to make security a built-in part of how software ships. On the client side, you will scope and deliver hands-on security engagements, advise customer stakeholders, and represent us as a trusted technical expert.

This is a hands-on technical role that balances internal security ownership with customer-facing project delivery, so comfort working directly with clients is essential.

What You'll Do

Internal security (our own environment)

• Design, implement, and maintain security controls across our AWS and Azure environments, covering identity (IAM, Azure AD/Entra ID), networking, encryption, logging, and workload protection.
• Build and enforce cloud security guardrails using native services (AWS Security Hub, GuardDuty, Azure Defender, Microsoft Sentinel) and cloud security posture management (CSPM) tooling.
• Lead detection and response efforts, including triage, investigation, containment, and post-incident review.
• Build and tune detection logic, alerting pipelines, and automation to reduce manual toil and improve mean time to detect and respond.
• Run and improve vulnerability management: scanning, prioritization, remediation tracking, and reporting.
• Develop and maintain security architecture standards, runbooks, and documentation.

Client project delivery

• Scope, plan, and deliver hands-on security engagements for customers (cloud security reviews, architecture design, hardening, assessments, and remediation).
• Serve as the technical lead and primary point of contact on client projects, translating requirements into deliverables.
• Advise customer stakeholders (engineers through executives) on risk, remediation, and security best practices.
• Conduct or coordinate penetration tests, configuration reviews, and red team exercises for clients, then drive remediation of findings.
• Produce clear, professional client-facing deliverables: assessment reports, architecture diagrams, and remediation roadmaps.
• Support compliance and audit work for clients, with a focus on Singapore government and regulated-sector frameworks (IM8, GCC/GCC+, MTCS, CCoP, PDPA, MAS TRM where relevant), alongside international standards (SOC 2, ISO 27001).

Cross-cutting

• Partner with software and infrastructure teams (internal and client) to embed security into the SDLC (threat modeling, secure code review, CI/CD security gates).
• Evaluate, deploy, and manage security tooling (SIEM, EDR, IDS/IPS, CSPM, secrets management, identity and access).
• Mentor junior engineers and raise security awareness across teams.

What We're Looking For

Required

• 5+ years of experience in cybersecurity, security engineering, or a closely related field.
• Strong knowledge of network security, operating system internals (Linux and Windows), and common attack and defense techniques.
• Deep hands-on experience securing AWS and Azure at scale: identity and access management, network segmentation (VPC/VNet, security groups, NSGs), key management, and workload and data protection.
• Proficiency with at least one scripting or programming language (Python, Go, Bash, or similar) for automation and tooling.
• Experience with detection and response: SIEM platforms, EDR tools, and log analysis at scale.
• Solid grasp of common frameworks and standards (MITRE ATT&CK, NIST CSF, OWASP Top 10, CIS Benchmarks).
• Working knowledge of Singapore government security and compliance requirements, including IM8 (Instruction Manual on ICT & SS Management, managed by GovTech), the Government on Commercial Cloud (GCC and GCC+) guardrails for AWS and Azure, MTCS (SS 584), the Cybersecurity Act and Cybersecurity Code of Practice (CCoP) for Critical Information Infrastructure, and the Personal Data Protection Act (PDPA).
• Strong analytical skills and the judgment to prioritize risk in a fast-moving environment.
• Clear written and verbal communication, with the ability to explain technical risk to non-technical stakeholders.
• Comfort working directly with clients: scoping engagements, managing expectations, and presenting findings to customer stakeholders.
• Ability to manage multiple concurrent projects and shift between internal work and client delivery.

Nice to Have

• Industry certifications (OSCP, GIAC/SANS, CISSP, CCSP, or equivalent), including cloud security certs (AWS Certified Security Specialty, Azure Security Engineer Associate AZ-500).
• Experience with infrastructure as code (Terraform, CloudFormation) and policy as code.
• Background in application security, threat modeling, or secure software development.
• Familiarity with container and Kubernetes security.
• Experience delivering projects under Singapore Government on Commercial Cloud (GCC/GCC+) or for CSA-regulated CII owners.
• Familiarity with CSA Cyber Essentials and Cyber Trust certification marks.
• Eligibility for Singapore government security clearance, where required for public-sector engagements.
• Hands-on penetration testing across multiple scopes: web applications, APIs, external and internal network/infrastructure, cloud configuration reviews (AWS and Azure), and mobile or wireless where applicable.
• Familiarity with common offensive tooling (Burp Suite, Nmap, Metasploit, Cobalt Strike, cloud-native testing tools) and structured methodologies (OWASP WSTG, PTES, NIST SP 800-115).
• Prior experience in a consulting, professional services, or managed security services (MSSP) environment.
• Prior experience leading incident response for production systems.
• Experience operating in a regulated or compliance-heavy environment.

What Success Looks Like

• In your first 90 days: you understand our environment, threat landscape, and tooling, and you have closed or improved several high-priority gaps.
• Within 6 months: you own key areas of our detection and response program and have measurably reduced risk in those areas.
• Within a year: you are a trusted technical leader who has shaped our security architecture and lifted the capability of the whole team.

AIRCRAFT ENGINEERINGSERVICE ENGINEER

Job Description & Requirements

Job Duties

• Day to day routine maintenance & rectification of aircraft defects
• Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements
• Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department
• Assisting in the forecasting of manpower, spares & equipment needs
• Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation
• Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented
• Ensuring that tools & equipment under his control are properly maintained, calibrated and correctly used for the jobs
• Ensuring action is taken at all times to maintain the aircraft on schedule
• General supervision, control & discipline of staff under his charge
• Performing other duties, as and when required

Job Requirement

• Possess relevant Licenses from the Aviation Authority, with at least 7 years of relevant working experience
• Good communications and interpersonal skills
• Meticulous and organized

ST Engineering is a global technology, defense and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defense and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.