Total 2,823 Senior Executive software test engineer job vacancies in Australia

Job Description

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending all project/ technical meetings with authorities, developer, and contractors
• Prepare technical engineering reports as and when required by authorities or clients
• Familiar with engineering software and latest code of practice
• Lead and co-manage a team of operational staff to meet the objectives and targets set by the project

Job Requirements

· Candidate must possess at least a Degree in Engineering (Civil) recognized by Professional Engineers Board (PEB) Singapore

· Minimum 3 years and above of working experience in local Civil and Structural consultancy firm

· Able to perform structural analysis using design software such as Tekla, SAP2000, SAFE, ETABS, Prokon, etc.

· Ability to co-manage, lead and inspire project teams

· Willing to and with enthusiasm to learn in the field of civil and structural engineering design

· Able to work independently

· Possess good communication skill

Thank you for your application but we regret that only shortlisted candidates will be notified.

Key Tasks and Responsibilities:

• Technical Guidance – Provide expert advice and technical support to the wider BWO organisation on Process Safety / Technical Safety activities in Asset Operations, Projects and Concept Development.
• Verification Activities – Ensure Asset Operations and Projects compliance with Technical Standards, Design Performance Standards and Operational Performance Standards. Support the internal verification process, performing process safety verification activities in coordination with the Verification / Continuous Improvement department.
• Monitor and report Key Performance Indicators (KPIs) related to Process Safety. Conduct regular performance analysis to uncover weak signals and proactively identify areas of improvement.
• Support development and maintenance of BWO’s Technical Standards – These define the minimum requirements for Asset Operations and Projects within own discipline.
• Support Level 3 Incident Assessments, where required.
• Continually seek improvements in personal areas of responsibility.

Qualifications:

• A minimum of 10+ years’ experience in the offshore Oil & Gas industry, or closely related industry.
• Technical Safety experience in Projects is required, preferably within the FPSO industry.
• Operational expertise from both project and operations phases of offshore facilities, including experience in audit and verification activities is preferred.

Skills:

• Team player with the ability to lead.
• Proactive and able to work independently, applying a structured and systematic approach.
• Strong communication skills and the ability to ask relevant questions and provide thorough explanations.
• Ability to deliver high quality work on time.
• Ability to work in a multidisciplinary / multinational environment.
• In-depth knowledge of Technical Safety design and Process Safety.
• Well-versed in relevant international Codes and Standards.
• Good awareness of safety management systems and best practices across the industry.

Job Summary

Lead and supervise facilities maintenance and M&E works to ensure efficient building operations. Collaborate with clients, subcontractors, and internal teams to resolve technical issues and deliver high-quality service outcomes.

Responsibilities

• Plan, execute, and supervise all facilities maintenance work services to ensure operational efficiency and compliance with standards
• Manage building, facilities, and mechanical & electrical (M&E) works to optimize facilities performance and reliability
• Coordinate and supervise M&E installation and maintenance activities to meet project timelines and quality requirements
• Collaborate closely with clients, subcontractors, and facilities teams to identify and resolve technical issues promptly
• Participate in M&E-related meetings and prepare detailed reports to support decision-making and project tracking
• Assist in planning, controlling, and coordinating mechanical and electrical works to align with project objectives
• Schedule, monitor, and supervise the progress of works to ensure timely completion and adherence to specifications
• Prepare and follow up on client inquiries and quotations to support business development and client satisfaction
• Adhere to company internal work processes and maintain accurate documentation for operational transparency
• Build and maintain strong client relationships by upholding high-quality service standards and responsiveness

Required competencies and certifications

• Diploma or Degree in Engineering, Building, Real Estate, Facilities Management, or related fields

Preferred competencies and qualifications

• Facilities maintenance operations experience with at least 3 years in a relevant role

Other Information

• Work schedule: 5.5 days work week

Responsibilities:

• Design and review mechanical layouts for warehouse automation systems using AutoCAD
• Integrate AGV, AMR, and shuttle systems within warehouse infrastructure
• Diagnose and resolve mechanical issues in automation equipment (e.g., AGVs, conveyors, AMRs)
• Support on-site installation, commissioning, and system testing
• Collaborate with vendors and cross-functional teams to ensure timely project delivery
• Supervise small teams or subcontractors and provide technical guidance
• Travel as required for site inspections, installations, and troubleshooting

Qualifications:

• Diploma or Degree in Mechatronics, Mechanical, Electrical, or related field.
• Basic understanding of mechanical systems, electrical wiring, sensors, and actuators.
• Exposure to PLC or automation systems is an added advantage.
• Strong practical knowledge in automation and control systems, electrical schematics, system integration, and mechanical troubleshooting.
• Demonstrated experience in project leadership or small team management.
• Strong analytical thinking and decision-making abilities.
• Open to travel and site-based work when required.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

What you will do:

Acts as on-site project leader to plan, execute, and complete assigned projects. Delegates tasks to execute and fully complete assigned projects. Coordinates communication with customer during all phases of the project. Coordinates the work of subcontractors. 

How you will do it:

• Define scope, budget and schedule for projects.

• Device project implementation methodology.

• Plan and oversee work schedule for the multiple small to medium scale project under responsibility, in coordination with supervisor.

• Identify potential project risks and recommend appropriate resolutions.

• Establish effective communication with customer.

• Track and update progress, task and project health to supervisors.

• Ensure and monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

• Perform regular quality audit for all the suppliers and sub-contractors.

• Identify and secure variation order.

• Cost control.  Track, monitor and ensure delivery of financial commitment as per KPI.

• Managing reports and documents.

• Work closely with Sales team for tender bidding.

• Supervision of sub-contractors’ work at site.

• Schedule purchase and deliveries of all materials for the project in a timely manner.

• Able to work with drawings and submission as per project requirement.

• Assign task to, and supervise Assistant Project Engineer, Technician, if any.

• System applications, drafting, data base generation and commissioning.

• Follow-up on payment from customers and verify payment to our suppliers.

• Train customer and provide first year maintenance warranty schedule visit.

• Hand over project to customer and later to service team.

• And other related works as assigned by your superior.

What we look for:

• Degree with minimum 3 years relevant working experience in BMS project.

• Excel, Word and Project essential.

• Require interaction with clients, consultants and sub-contractors, etc.

• Need to work odd hours as and when required, whenever the work need to be done on time.

About our group:

The Equipment Manufacturing team at Seagate is responsible for the build, assembly, testing, and delivery of advanced manufacturing equipment that supports Seagate’s HDD production and technology development.

We work closely with Engineering, Supply Chain, and Operations teams to ensure equipment is delivered on time, to specification, and at the highest quality standards, enabling successful factory ramp and product innovation.

About the role – you will:          

• Lead quality planning and assurance for new product introductions, process transfers, and manufacturing operations.
• Drive implementation and continuousimprovement of AIAG core tools (APQP, PPAP, FMEA, SPC, MSA, Control Plans).
• Partner with cross‑functional teams to resolve quality issues through root cause analysis and CAPA.
• Establish and monitor key quality metric sand trends to support data‑driven decision making.
• Ensure robust inspection and validation processes through review of drawings, specifications, and GD&T.
• Support qualification and validation activities including first article inspection and process capability studies.
• Lead internal and external audits to ensure compliance with quality systems and standards.
• Drive continuous improvement, including non‑conformance resolution, supplier quality, and manufacturing quality awareness.

About you: 

• Innovative, inclusive, and integrity-driven.
• Able to work effectively in a fast-paced and dynamic environment with multiple priorities.
• Strong team player with a collaborative and resourceful approach to problem-solving.
• Detail-oriented, results-driven, and capable of working independently when required.
• Effective communicator with strong stakeholder management skills.

Your experience includes:

• Bachelor’s degree in Engineering, Quality, Manufacturing, or related discipline.
• 5–8 years of quality assurance experience in a manufacturing environment.
• Strong working knowledge of AIAG Core Tools (APQP, PPAP, FMEA, SPC,MSA) and quality systems.
• Experience in root cause analysis, CAPA, audits, and customer or supplier quality management.
• Ability to interpret engineering drawings, GD&T, and perform data analysis using tools such as Excel or similar systems.

Job Role

As a Senior QAQC Engineer, you will play a pivotal role in ensuring that all construction projects meet the highest quality standards and comply with regulatory guidelines. You will lead quality assurance initiatives and collaborate with various teams to uphold a commitment to excellence in delivery.

Key Responsibilities

Quality Management System

Implement and maintain the organization’s Quality Management System (QMS) to ensure compliance with industry standards and regulatory requirements.

Project Quality Planning

Prepare and oversee Project Quality Plans (PQP) for all construction projects, ensuring thorough quality control measures are outlined and implemented.

Inspections and Audit

Conduct regular inspections and audits of materials, processes, and deliverables to identify defects, non-conformances, and areas for improvement.

Stakeholder Collaboration

Collaborate with project managers, engineers, subcontractors, and suppliers to ensure alignment with quality standards and project schedules.

Regulatory Compliance

Analyze and assess suppliers and subcontractors for certification compliance with relevant build and construction authorities, ensuring quality requirements are met.

Continuous Improvement

Propose and implement continuous improvement initiatives to enhance the effectiveness of the quality management system.

Data Analysis

Collect and analyze data related to quality metrics to identify trends, assess performance, and implement corrective actions as needed.

Documentation Management

Maintain comprehensive records of all quality assurance activities, including audits, inspection reports, and quality control plans, in accordance with ISO standards, while ensuring accessibility for review and compliance purposes.

Environment, Health and Safety Compliance

Ensure that all projects adhere to workplace health and safety policies, conducting assessments and audits as necessary to mitigate risks.

Ad-hoc Duties

Perform other duties and responsibilities as assigned by management to support overall project objectives.

Job requirements

• Bachelor’s degree in quality assurance engineering, civil engineering, or a related field.
• Requires 5-7 years of relevant experience in the building and construction industry, preferably with main contractor experience on large-scale projects.
• Resident Technical Officers (RTO) certification
• Quality Mark / CONQUAS certification
• ISO9001 Auditor certification & proficient understanding of quality assurance methodologies, inspection techniques, and quality control processes.
• Excellent communication skills and ability to interact effectively with multidisciplinary teams and stakeholders.
• Ability to thrive in a dynamic and fast-paced environment, effectively managing multiple tasks and adapting quickly to changing priorities while maintaining high levels of productivity and focus.
• Strong organizational skills, a keen eye for detail, and excellent planning and coordination abilities.

The Senior Design Engineer is responsible for assisting the Senior/Technical Manager on structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis.
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications, and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers, and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 6 to 8 years of experience in design and construction
• At least 5 years of civil MRT station experience (have completed at least 1 MRT station project)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.
• Well versed in Autocad and BIM software is preferred.
• Technical Competencies: Technical expertise and knowledge in Foundation, Structural and Civil works (MRT Stations).

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead HVAC design development for semiconductor and cleanroom facilities
• Perform cooling load calculations, system sizing, and equipment selection
• Prepare and review HVAC layouts, ducting, and airflow designs
• Coordinate HVAC design with cleanroom, electrical, piping, and process teams
• Review shop drawings, technical submissions, and method statements
• Support installation, testing, and commissioning of HVAC systems
• Troubleshoot design and site-related HVAC issues
• Liaise with clients, consultants, vendors, and contractors
• Ensure compliance with BCA, NEA, WSH, and project specifications
• Mentor junior engineers and provide technical guidance
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Mechanical Engineering or related field
• Minimum 5 years of HVAC design experience, preferably in semiconductor or industrial projects
• Strong knowledge of HVAC systems, heat transfer, and airflow control
• Proficient in AutoCAD, Revit, or similar design tools
• Experience in cleanroom HVAC systems is highly preferred
• Good coordination, leadership, and problem-solving skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

Job Description:

This position requires minimum 10 years of localexperience in same field / sector, with good business knowledge in this sector.

• Combine service drawing knowledge with AutoCAD skills to do presentations to clients
• Familiar with project specifications and technical clarifications and prepare method statements and check drawing discrepancies
• Prepare Coordinated Services Drawing (CSD), penetration drawing and coordinate with client team, attend progress / site / MEP meeting
• MEP design experiences are must with more client interaction knowledge
• Responsible for project delivery including engineering, schedule, budget, coordination and site supervision
• Supervise the M&E work and coordinate with clients’ representatives, consultants and subcontractors on technical matters
• Ensuring Supervisor & Foreman meets client & regulatory work requirements
• Attend, Conduct and Record the coordination meeting with all M&E with team, client and other trade subcontractors
• Liaise and coordinate with clients, authorities, consultants and M&E subcontractors and suppliers on the schedule of work and delivery of materials to meet the project requirements
• Supervise and inspect all M&E work and coordinate with other trades subcontractors
• Coordinate and arrange for testing and commissioning of M&E systems including the handover of all warranties, operating and maintenance manuals etc
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Ensuring environmental, safety and health practices are carried out at all time
• Excellent understanding and hands-on experience with building management systems (BMS) / building information modelling (BIM) and controls and their integration with data centre infrastructure
• Extensive experience with large-scale chilled water plants including chillers, chilled water distribution, chilled water-cooling plants and storage systems, cooling towers
• Troubleshooting and repairing of ACMV and its control equipment
• Diagnose and resolves complex technical issues related to Daikin air conditioning systems
• Any other ad-hoc duties as assigned

Job Requirement:

• Minimum Degree/ Diploma in Engineering from recognised local University.              (preferably BCA Academy (Singapore))
• Minimum 10 years of relevant working experience in the same sector.
• Willing to be posted to oversee projects in countries like India etc
• Proficiency in MS office tools, Microsoft project, Presentation, AutoCAD and/or BIM.
• Good communication and interpersonal skills
• Additionally having local experience in same field / sector, with good business
• Contacts in this sector to develop new business opportunities is a plus
• hands-on experience with mechanical and control systems, including fuel systems, building management systems (BMS) and controls, chilled water-cooling plants
• Hands-on experience in ACMV Chiller System installation, operations, maintenance, and repairs large-scale commercial cooling systems. (Primary focus is to ensure central cooling systems, such as water-cooled or air-cooled chillers, cooling towers, and Air Handling Units (AHUs), run safely, continuously, and at peak energy efficiency)

Please include your availability date and expectedsalary in your resume. We regret only shortlisted candidates will be notified

About the role:

SMITECH is seeking an experienced Senior Electrical Engineer to support the planning, coordination, supervision and delivery of electrical and M&E works for a major infrastructure construction project in Singapore.

This role will work closely with the Project Manager, consultants, subcontractors, site teams and internal project stakeholders to ensure that electrical, ELV and related MEP installations are executed safely, correctly and in accordance with approved drawings, specifications, statutory requirements and project standards.

This project role is to be based on site on a 5.5-day work week.

Key Responsibilities:

• Assist the Project Manager in the planning, coordination, execution and supervision of electrical and M&E works on site.
• Oversee electrical, ELV and related MEP interface works, including coordination with ACMV, fire protection, plumbing and sanitary systems where required.
• Review approved drawings, specifications, tender documents, contract requirements and authority requirements to identify technical risks, constructability issues and site constraints.
• Coordinate with consultants, subcontractors, suppliers and internal teams to resolve technical issues, design clashes, RFIs and site coordination matters.
• Prepare, review and follow up on RFIs, technical clarifications, shop drawings, material submissions, ITPs, MSRA and method statements.
• Supervise site engineers, supervisors and subcontractors to ensure works are carried out according to project schedule, quality standards and safety requirements.
• Conduct regular site inspections to check installation progress, workmanship quality and compliance with approved drawings and specifications.
• Monitor site productivity, technical progress and work sequencing to support timely project delivery.
• Coordinate and witness testing and commissioning activities for completed electrical and MEP systems prior to handover.
• Support project documentation, inspection records, handover records and close-out submissions where required.
• Enforce WSHE requirements and promote safe work practices among site teams and subcontractors.

Requirements

• Degree or Diploma in Electrical Engineering, Building Services Engineering, Mechanical & Electrical Engineering or related discipline.
• Minimum 5 years of relevant experience in electrical engineering, M&E construction or infrastructure project delivery.
• Strong experience in electrical and ELV works within construction, infrastructure, transport, utilities, airport, MRT/LTA-related, industrial or large-scale public-sector projects will be an advantage.
• Good understanding of electrical installation works, technical coordination, shop drawings, material submissions, ITPs, MSRA, RFIs and testing & commissioning procedures.
• Able to read and interpret drawings, specifications, contract documents and authority requirements.
• Hands-on experience coordinating with consultants, clients, subcontractors, suppliers, site teams and internal management.
• Strong site coordination, technical problem-solving, documentation and communication skills.
• Able to lead site engineers, supervisors and subcontractors in a fast-paced project environment.
• Familiar with Singapore construction site practices, quality requirements and WSHE expectations.
• Candidates currently performing Electrical Engineer / Senior Electrical Engineer / Assistant M&E Manager duties are welcome to apply.

Job Responsibilities

• Plan and coordinate project activities and deliverables.
• Monitor project schedules and progress.
• Coordinate engineering interfaces among stakeholders.
• Review technical submissions and project documentation.
• Support project planning and resource management.
• Monitor project risks and mitigation measures.
• Coordinate meetings and technical discussions.
• Track project milestones and key performance indicators.
• Prepare management reports and presentations.
• Support successful project execution and completion.

Job Requirements

• Degree in Engineering.
• Minimum 8 years of project engineering experience.
• Experience in infrastructure projects preferred.
• Strong planning and coordination skills.

Position Summary

As a Senior Manufacturing Equipment Engineer, you will provide technical leadership in smart manufacturing systems within a high-volume consumables environment. Responsibilities include troubleshooting and maintaining optical, mechanical, electrical, and fluidics systems, while driving improvements in equipment uptime and reliability. You will lead and support new product introduction (NPI) and equipment performance enhancement initiatives, applying engineering principles to resolve complex manufacturing and equipment challenges. Additionally, you will be responsible for training and mentoring Technicians and Engineers to ensure performance standards are met, while also providing effective leadership and supervision to your assigned team.

Position Responsibilities:

• Complete required training (e.g. cGMP, safety and work instructions, etc.) within a stipulated time frame.

• Execute tasks strictly following cGMP, Quality, Safety and Work instruction requirements.

• Ensure employees follow safety, quality requirement, and all applicable company policies at all times.

• Ensure proper housekeeping and maintain cleanliness (6S) of the working area.

• Timely report/ escalate any concerns (work-related or personal).

• Meet daily production schedule and performance expectation.

• Able to take on additional tasks or responsibilities when required.

• Competent to guide technician in performing maintenance activities.

• Develop solutions to restore and sustain optimal functionality of manufacturing equipment and systems.

• Demonstrates the ability to identify and qualify alternative replacements for equipment parts, executing required changes through established change control processes

• Improvement work:

  Participate and lead improvement initiatives across areas under broad direction.

  Facilitate an organization's systems and processes relating to continuous improvement (e.g. 6S) and coach team members toward continuous improvement.

  Analyse work practices beyond own scope of work for innovation and improvement opportunities with broad supervision.

  Develop work instructions for each type of equipment.

• Incident investigation and reporting:

  Lead a cross-functional investigation team and able to submit a formal report under broad supervision.

  Mentor team members on good investigation & reporting skills.

  Adapt different techniques and concepts in technical writing for effective engagement with individuals and/or teams.

• Lead and mentor a group of team members to meet production KPI and corporate goals & targets:

  Assist and provide technical support to the shift to meet daily production target and shift KPIs with some guidance.

  Co-ordinate & prioritize activities based on production, equipment and supply to meet the objectives.

• Learning and Development:

  Responsible for the skill development of the team.

  Able to provide guidance to Technician and Engineer on PLC and automation equipment troubleshooting

  Develop On the job (OJT) training programmes for Engineer.

• Exhibits strong proficiency in maintaining and repairing complex smart manufacturing equipment, and in formulating sustainable solutions for recurring equipment problems.

• Implement improvements to the existing equipment maintenance processes with broad supervision.

• Participate in the design of automation equipment to improve product quality, cycle time, and cost.

• Data Collection and Analysis:

  Leverages advanced data analysis techniques to convert raw and complex operational data into strategic insights that optimize equipment reliability, efficiency, and overall operational effectiveness.

• Demonstrates the ability to develop innovative solutions for complex problems.

• Lead technical root cause analysis, incident investigations, and solving problems on issues.

• Be a role model for Technicians and Junior Engineers.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Advanced understanding on Electrical / Electronics / Mechanical / Pneumatic

• Ensure compliance with cGMP, Quality, work safety instructions & practices at all times.

• Good project management skills.

• Experience in working on automatic control systems.

• Experience in troubleshooting PLC (e.g. Beckhoff or Allen Bradley PLC) and HMI process control automation system.

• Experience working on Server/Client and Infrastructure will be an added advantage.

• Ability to draft engineering drawings.

• Complete tasks in a safe and efficient manner.

• High level of discipline and integrity.

• Able to undertake multiple tasks.

• Able to undergo job rotation/ cross training.

• Able to work in noisy environment with appropriate personal protection equipment (PPE).

• Able to work in chemical environment with appropriate personal protection equipment (PPE).

• Must be able to identify different colors for work purposes. In Illumina, we handle components/chemicals with different colors, and it is necessary to be able to differentiate and identify the correct components/chemicals (using visual) during operation.

• Possess a positive attitude and sense of urgency.

• Meticulous, keen attention to details and organized.

• Be agreeable to work 12 hours (from 0800 to 2015 for the day shift and from 2000 to 0815 for the night shift) rotating shifts (Monthly rotations from day to night and vice versa) with staggered break times in accordance with the roster when required.

• Able to safely lift and handle weights up to 15 kg, with occasional requirements to manage heavier loads.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Diploma or equivalent in Electrical, Electronics, Mechanical or Mechatronics.

• Bachelor’s Degree in Electrical, Electronics, Mechanical or Mechatronics will have added advantage.

• 10+ years for Diploma or 4+ years for Bachelor’s degree of working experience in manufacturing/production environment.

• Experience in GMP controlled manufacturing / production environment.

• Exposure to data analytics, including the ability to analyze equipment performance, identify trends, and support data-driven decision making, is an added advantage.

• Experience or familiarity with predictive maintenance methodologies (e.g., condition monitoring, failure prediction, reliability analysis) to improve equipment uptime and operational efficiency is preferred.

• Knowledge or exposure to agentic AI development, intelligent automation, or AI-driven optimization in manufacturing environments will be considered an added advantage.

• Familiarity with digital and analytics tools such as Statistical Process Control (SPC), Python, Power BI, Tableau, and Power Automate for data analysis, visualization, and workflow automation is an added advantage.

• Exposure to application, coding language and dashboard development tools such as python, Streamlit, Angular, and NestJS for building data-driven applications or internal tools is an added advantage.

Responsibilities:

• Data Infrastructure: Build, implement, and maintain scalable data pipelines and storage architectures.
• Data Quality: Maintain strong data integrity by ensuring reliability, consistency, and accuracy across all data processes.
• Performance Optimization: Enhance system efficiency by tuning data processing workflows and improving large-scale performance.
• Process Improvement & Mentoring: Strengthen data engineering practices while providing guidance and support to junior engineers.
• Cross-Functional Collaboration: Partner with business analysts, data scientists, and backend teams to deliver timely and actionable data solutions.

Qualifications:

• 5+ years’ experience in data engineering or backend roles, with strong programming skills in Python or Java/Scala.
• Hands-on experience with big data tools: Spark, Flink, Kafka, Airflow, and cloud platforms (AWS, GCP, Azure); proficient in SQL.
• Skilled in designing and maintaining data models, warehouses, and ETL/ELT pipelines for scalable, reliable systems.
• Knowledgeable in data quality, governance, security, and compliance best practices.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage