Total 1,363 process engineer job vacancies in Others category in Australia

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities
• Taking charge of tribology testers maintenance, spare parts inventory management and hardware upgrading activities 

Position Summary
The Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Other ad-hoc duties as assigned

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on working experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Position Summary

The Process Engineer (Lithography) is responsible for the development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line for lithography process
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Any other ad-hoc duties as assigned.

Requirements

• Minimum Bachelor’s Degree in Materials Science, Microelectronics, Chemical Engineering or relevant engineering degrees.
• Minimum 3-years hands-on Lithography process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line.
• Knowledge in process engineering, process control engineering and yield enhancement.
• Experience in SPC, DOE, FMEA, and 8D reports

Key Responsibilities

• Present improvement concepts and technical proposals to management
• Ensure all improvement initiatives align with internal engineering governance, HSSE policies, and relevant international standards
• Lead improvement processes and projects
• Monitor technical progress, manage deviations, and resolve cross-functional
• Lead small-to-medium scale operational improvement initiatives
• Use data-driven tools to assess performance trends and propose practical optimization solutions

Qualifications

• Degree in Process / Mechanical / Electrical / Chemical / Mehcatronics engineering
• Min 6 years of experience in oil terminal storage / Oil & Gas / Refinery
• Six Sigma Super / Black Belt certified will be a plus
• Proficient in process modeling & design tools (AutoCAD / Aspen HYSYS)
• Knowledge with instrumentation systems (SCADA / DCS / PLCS)
• Comfortable travel to Karimun (Indonesia) for work assignment as and when needed
• Can comence immediately or with short notice will be a big plus

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Diploma in Piping/Process designing
Good experience in smartplant P&ID software design and drafting of P&ID drawings for semi conductors, oil and gas and chenical plant projects.
Able to work under minimum supervision.
Willingness to work in Jurong Island area
With minimum 2 years of related experience.

Job Summary

You will support process engineering and sustaining activities for a European semiconductor material manufacturer, driving process optimization, troubleshooting, and continuous improvement to enable smooth mass manufacturing transitions and cost-effective operations.

Responsibilities

• Be part of the process engineering team to optimize processes and sustain engineering activities for new and existing materials and equipment
• Troubleshooting efforts on manufacturing lines to resolve equipment and material issues, ensuring minimal disruption
• Identify process issues, conduct root cause analysis, and resolve customer complaints through effective problem-solving techniques
• Review and maintain accurate, up-to-date process documentation to ensure compliance and knowledge retention
• Drive lean and continuous improvement initiatives to enhance yield, productivity, and reduce scrap costs
• Facilitate smooth transitions from development to mass manufacturing by coordinating cross-functional collaboration
• Collaborate with production, quality, and maintenance teams to improve process workflows and operational efficiency
• Support procurement in sourcing strategies and cost reduction activities related to materials and equipment
• Support industrialization projects focused on process and equipment improvements to enhance manufacturing capabilities

Preferred competencies and qualifications

• Bachelor of Engineering or Science in Mechanical, Chemical, Chemistry, or Material Science
• 5 to 8 years in process development and sustaining engineering in semiconductor processes
• Proficiency in lean six sigma methodologies to drive process improvements
• Strong application of statistical tools including SPC, Minitab, DOE, FMEA, and JMP for data-driven decision making
• Knowledge of ISO standards and Environmental, Health, and Safety (EHS) management systems
• Experience with SAP for creating BOMs, routing, and new material number creation
• Demonstrated management skills with the ability to analyze complex problems, work independently, and manage multiple tasks effectively
• Work location in the West region (bus transport provided)

Job Summary:  
Equipment Technicians are responsible for monitoring, sustaining, and improving the equipment in their assigned area, while working in partnership with Shift Operations team members, area equipment engineers and tool vendors. Equipment Technicians monitor tool performance, schedule and perform preventative maintenance on assigned tool sets, and use mechanical, electronic and PC/software skills to repair equipment issues. 
 
Main Responsibilities:  

• Performs electrical or mechanical troubleshooting to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process 
• Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, rough sketches or drawings 
• Uses test and diagnostic equipment to perform checkouts. 
• Rebuilds manufacturing equipment as required 
• May perform equipment modifications as directed by engineers. 

 
Minimum Required Qualifications/Experience  

• Diploma in Engineering. Mechanical/Electrical/Electronic Engineering is preferred 

• Able to work on 12 hours rotating shift.

Preferred Technical Skills  

• Experience in equipment maintenance and troubleshooting is preferred 

• Knowledge of semiconductor manufacturing process and technologies is preferred 

• Knowledge of AI tools and application 

Must Have Soft Skills 
• Strong analytical and problem-solving skills with a data-driven mindset  
• Effective communication skills for cross-functional collaboration with engineering, operations, and quality teams 
• Ability to work independently and manage multiple priorities in a fast-paced environment 
• Adaptability and resilience in a dynamic manufacturing setting 
 

Highly Desirable/Preferred skills or experience  
• Experience in or knowledge on semiconductor manufacturing process and technologies 
• Familiarity with MES (Manufacturing Execution Systems) and automation tools 

•  Internship or experience gained as equipment in the semiconductor industry is a plus 

Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value 
  

  Performs electrical or mechanical troubleshooting to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process. Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, rough sketches or drawings. Uses test and diagnostic equipment to perform checkouts. Rebuilds manufacturing equipment as required. May perform equipment modifications as directed by engineers.

Role and Responsibilities

• Document inspection and maintenance activities.
• Ensure proper housekeeping of spare parts, equipment and tools.
• Help to conduct fault analysis and testing of mechanical and electrical systems.
• Oversee the work of contractors outside the mechanical and electrical team to ensure safety requirements and operating standards are met.
• Perform corrective maintenance of mechanical and electrical systems.
• Perform preventive maintenance of mechanical and electrical systems.
• Oversee the work of contractors outside the mechanical and electrical team to ensure safety requirements and operating standards are met.
• Perform fault analysis and testing of mechanical and electrical systems.
• Electrical engineering technicians test, fix and adjust electrical equipment or products.
• Inspecting designs for quality control, reporting findings and providing recommendations
• Finding solutions for technical design problems that occur during the construction of electrical systems.
• Adjusting and replace broken electronic components and circuitry.
• Drawing diagrams with specifications to clarify the design details of experimental electronic units.

Requirements

• Diplama / Any
• Minimum 10 years' experience.
• Working knowledge of various computer software programs (MS Office, POS)
• Proficient in AutoCad.

The Site/Project Engineer is responsible for supervising structural projects. They ensure each project is feasible by analyzing local and environmental impacts and making sure that they can be completed on time within the budget restrictions. Other duties and responsibilities may include:

• Considering budget, regulations and environmental hazards during risk-analysis stage
• Preparing material, equipment and labor cost estimates and confirming costs are within the budget
• Forecasting design and construction timeline
• Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages
• Overseeing soil testing to establish soil strength and building feasibility

Job Description & Requirements

Site Manager plays a crucial role in overseeing the construction site and ensuring that projects run smoothly. Here’s a detailed list of responsibilities and duties for a Site Manager in Singapore:

1. Project Coordination:Coordinate with project managers, engineers, architects, and other stakeholders to ensure the project is progressing according to plan.
   Schedule and supervise daily construction activities and manage subcontractors.
2. Site Supervision:Oversee and monitor work on-site to ensure it meets quality standards and follows safety regulations.
   Conduct regular site inspections to ensure compliance with construction drawings and specifications.
3. Safety Management:Ensure that all safety procedures and regulations are adhered to on-site, including the use of personal protective equipment (PPE).
   Conduct safety meetings and provide safety training to workers.
4. Quality Control:Implement and maintain quality control procedures to ensure work is carried out to the required standards.
   Address and resolve any quality issues or defects promptly.
5. Resource Management:Manage and allocate resources efficiently, including materials, equipment, and labor.
   Monitor inventory levels and coordinate with suppliers to ensure timely delivery of materials.
6. Documentation and Reporting:Maintain accurate and up-to-date records of daily activities, including work progress, incidents, and any deviations from the plan.
   Prepare and submit progress reports to project managers and other relevant parties.
7. Compliance:Ensure that all work complies with local regulations, building codes, and environmental laws in Singapore.
   Obtain necessary permits and approvals for construction activities.
8. Problem-Solving:Identify and address any issues or delays that arise on-site, implementing solutions to keep the project on track.
   Resolve conflicts between workers or between workers and management.
9. Client and Stakeholder Communication:Liaise with clients, architects, and other stakeholders to address any concerns or changes in project scope.
   Ensure that client requirements and expectations are met.
10. Training and Development:Train and mentor junior site staff and ensure they are aware of safety practices and construction procedures.
    Promote a positive working environment and encourage teamwork among site personnel.
11. Site Managers must also be familiar with local regulations such as those enforced by the Building and Construction Authority (BCA) and the Workplace Safety and Health Council (WSHC).

About the Role

We are looking for a young, motivated Electrical Engineer to join our growing team. You will be involved in electrical design, testing, panel fabrication, site coordination, and supporting projects for major clients including semiconductor fabs, data centers, and industrial facilities.

This is an excellent opportunity for someone who wants hands-on experience and fast career growth in a technical engineering environment.

Responsibilities:

· Prepare documentation, reports, and project follow-ups

· Coordinate with suppliers, contractors, and internal teams

· Handling and solving of on-site technical issue & support when required

· Any ad-hoc duties as assigned

· Learn and assist senior engineers on live projects

Requirements:

· Diploma in Mechanical/ Electrical Engineering

· Strong knowledge & experience in electrical systems, panels, and power engineering

· Willing to learn and able to work hands-on

· Good communication and teamwork skills

· Fresh graduates are welcome to apply

· Able to start work soon is preferred

What We Offer

* Competitive salary and allowances

* Training and mentorship from senior specialists

* Exposure to real-world projects in semiconductor and industrial sectors

* Career growth opportunities into design, project engineering, or technical specialist roles

* Friendly and supportive working environment

Roles & Responsibilities

• ⁠Installing, configuring, testing, and supporting highly available LAN, WLAN, WAN and data center networks.
• ⁠Track all equipment RMAs and ensure that proper levels of spare inventory are maintained.
• ⁠On-site client support and user escalations base on incidents and service requests
• ⁠Test and validate all new hardware and connections for proper configuration and performance
• ⁠Troubleshoots and resolves critical network and system issues.
  

Requirements

• 4+ years progressively responsible experience in network engineering/architecture
• ⁠Strong Experience in LAN Cisco technologies, Proxies (Z-Scaler), WIFI Cisco environment, Firewall (PaloAlto) and VPN
• Hands on experience on High end Switches (Cisco Nexus Switches, Aruba switches, Aruba Wireless, Dell Switches, Infoblox DNS and DHCP)
• Must Have Experience in Semiconductor Manufactring domain.
• Hands of Experience in network concepts and protocols such as BGP, OSPF, STP, HSRP, Load Balancing..
• Exp in Configuring and troubleshooting switching technologies like STP, VTP, Multicast, QOS
• ⁠Certifications - including CCNA & CCNP.
• Experience of consolidated networks (voice / video / data) and associated management technologies (QoS, (Cisco), Traffic Shaping
• Experience with monitoring tools like Netops, Spectrum, Wireshark.
• Hands on exp in configuring and troubleshooting switching technologies like STP, VTP, Multicast, QOS

Job Description & Requirements

· To advice operational / site personnel on all engineering designs.

· To propose corrective actions for non-conformances related to engineering design.

· To assist in the investigation of complaints related to engineering design.

· To assist the Operation Manager in terms of administrative concern.

· To prepare technical submissions, including submission to authority, before work commencement.

· Prepare all report required for geotechnical matters

· Monitor and preparing soil investigation bore log

· To attend technical meetings

· To check and ensure that the latest construction drawings are being issued to the site

Qualification

• B.S. in Civil/Geotechnical Engineering

Experience

• 2 years relevant experience preferred

Skills

• Engineering competence/knowledge

Training

• In house and/or on the job training

Roles & Responsibilities

• ⁠Installing, configuring, testing, and supporting highly available LAN, WLAN, WAN and data center networks.
• ⁠Track all equipment RMAs and ensure that proper levels of spare inventory are maintained.
• ⁠On-site client support and user escalations base on incidents and service requests
• ⁠Test and validate all new hardware and connections for proper configuration and performance
• ⁠Troubleshoots and resolves critical network and system issues.
  

Requirements

• Total 7 years of working experience and 4 years progressively responsible experience in network engineering/architecture
• ⁠Strong Experience in LAN Cisco technologies, Proxies (Z-Scaler), WIFI Cisco environment, Firewall (PaloAlto) and VPN
• Hands on experience on High end Switches (Cisco Nexus Switches, Aruba switches, Aruba Wireless, Dell Switches, Infoblox DNS and DHCP)
• Must Have Experience in Semiconductor Manufactring domain.
• Hands of Experience in network concepts and protocols such as BGP, OSPF, STP, HSRP, Load Balancing..
• Exp in Configuring and troubleshooting switching technologies like STP, VTP, Multicast, QOS
• ⁠Certifications - including CCNA & CCNP.
• Experience of consolidated networks (voice / video / data) and associated management technologies (QoS, (Cisco), Traffic Shaping
• Experience with monitoring tools like Netops, Spectrum, Wireshark.
• Hands on exp in configuring and troubleshooting switching technologies like STP, VTP, Multicast, QOS

• Knowledge of M&E project requirements and contract requirements
• Experience in chiller system
• Able to manage projects/ claims/ sub-contracts
• Able to work as in teams
• Meticulous and responsible
• Safety knowledge & awareness
• Able to work odd hours (if necessary)
• Candidate must posses at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering
• Able to start work immediately or within short notice