Total 2,745 Senior Executive failure analysis engineer job vacancies

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Diffusion (Wet) Department diverse team of talent.

What you will be working on:

• To sustain and improve all equipment performance indices to meet operations goals

• Perform shift duties based on rotation systems to support production
• Optimize equipment uptime/ reliability thru scheduled & recovery maintenance. 
• Control equipment performance indices to meet BBS goals
• Comply to ISO standards and Quality systems of the company
• Forecast/ establish stock levels of spares and consumables to meet manufacturing capacity within allocated budget
• Establish and maintain preventive maintenance OI to standardize equipment practice
• Train/ mentor AEs to through OJT and continually upgrade their technical skills to cope with technological changes
• Recommend improvement to enhance capabilities, reliabilities or cost saving
• Participate in CIT team/ task force to optimize equipment performance and COO
• Start-up new equipment to support production ramp, from facilities hook-up, vendor start-up, to acceptance of equipment.
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Ensure good housekeeping and safety practices in the work area.

More about you:

• Degree in Electrical/Electronics/Mechanical Engineering Diploma in Mechatronics/ Electronics/ Mechanical Engineering with at least 4 years semiconductor equipment maintenance experience.
• 1-3 years relevant experience innthe semiconductor manufacturing environment. Fresh Degree holders are welcome to apply.
• High Vacuum maintenance experience
• Basic semiconductor wafer fabrication equipment/ process knowledge
• Able to interpret electrical/ pneumatic schematic drawings
• Team Player
• Possess a strong sense of responsibility

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Product Engineering Department diverse team of talent.

What you will be working on:

• Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.
• Identify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.
• Technical interface with Business Lines/customers
• Driver for yield improvement
• Resolve product yield, quality and reliability issues
• Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.
• Work with Customers/Mother Fab on the DfM related issue.
• Conduct product yield analyses to identify root cause of wafer sort and final test failures
• Set up fault diagnostic capabilities for yield improvement
• Work with Business line/customers on product low yield disposition
• Perform electrical and physical failure analysis to isolate fail location
• Drive the yield improvement task force

More about you:

• Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics
• 2 – 8 years product and/or test engineering, failure analysis or process-integration experience
• Experience in Fab process, yield engineering or design will be an added advantage
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical & problem-solving skills
• Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• To report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• To assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• To prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• To liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
• To attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule.
• To establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Any other duties that may be assigned from time to time.

Requirements

• Degree in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Good Time management and organization skills;
• Good interpersonal and communication skill;
• Able to multitask;
• Able to work under fast paced environment;
• Working at Changi Airport site office.

About the Role

We are seeking a Firmware Engineer / Senior Firmware Engineer to join a dynamic engineering team responsible for designing, developing, and maintaining embedded firmware solutions for industrial automation products. The successful candidate will be involved in firmware architecture, embedded software development, debugging, testing, and collaboration with cross-functional global teams to deliver high-quality and reliable products.

Key Responsibilities

• Design, develop, enhance, and maintain firmware for industrial automation products, including Micro800 PLC family solutions.
• Implement embedded firmware using industry-standard development tools and environments.
• Perform firmware debugging, troubleshooting, root cause analysis, and corrective actions for complex technical issues.
• Develop and maintain low-level device drivers and hardware abstraction layers for embedded systems.
• Work closely with Firmware, Hardware, System Test, and Product Management teams across global locations.
• Participate actively in Agile development activities including sprint planning, backlog refinement, stand-ups, and retrospectives.
• Conduct firmware verification, validation, and systematic testing to ensure product quality and reliability.
• Support integration of communication protocols and embedded operating systems.
• Prepare and maintain technical documentation including design specifications, interface definitions, test plans, and implementation guides.
• Participate in design reviews, code reviews, and technical discussions to ensure maintainable and scalable firmware solutions.
• Contribute to continuous improvement initiatives, engineering best practices, and software development processes.

Requirements

Education

• Bachelor's Degree in Electrical Engineering, Computer Engineering, Computer Science, Embedded Systems, or a related discipline.

Experience

• Minimum 5 years of experience in embedded firmware or embedded software product development.
• Experience in industrial automation, PLCs, or control systems is advantageous.

Technical Skills

• Strong programming experience in C and C++ for embedded systems.
• Hands-on experience with STM32 or similar 32-bit microcontroller architectures.
• Experience in low-level driver development and hardware interfacing.
• Experience with Real-Time Operating Systems (RTOS) such as:VxWorksThreadXQuadrosFreeRTOSOther RTOS platforms
• Knowledge of communication protocols including:TCP/IPEthernetUSBWi-FiCAN BusProfibus
• Familiarity with embedded development and debugging tools including:JTAG debuggersOscilloscopesLogic analyzersHardware diagnostic tools
• Understanding of firmware architecture, embedded design patterns, and hardware-software integration.

Soft Skills

• Strong analytical and problem-solving skills.
• Ability to investigate and resolve complex technical issues independently.
• Excellent communication and interpersonal skills.
• Ability to collaborate effectively in multicultural and cross-functional teams.
• Innovative mindset with a willingness to explore new ideas and solutions.

Preferred Qualifications

• Experience developing firmware for digital and analogue hardware platforms.
• Ability to interpret hardware schematics and component specifications.
• Experience documenting firmware architecture and hardware-software interfaces.
• Knowledge of embedded software development methodologies, coding standards, and modern engineering practices.
• Experience driving process improvements and engineering excellence initiatives.
• Knowledge of industrial automation systems, PLCs, and control technologies.

Key Responsibilities

• Provide Level 2/3 support for network infrastructure across data centers, remote branches, and overseas locations.
• Install, configure, and troubleshoot Cisco routers, switches (Nexus, 2960, 3750), and firewalls (Checkpoint, Juniper).
• Manage and support routing protocols including RIP, EIGRP, OSPF, BGP, and HSRP.
• Perform network health checks, DR drills, and ISDN testing for business continuity.
• Coordinate with vendors for SSOE deployments, hardware replacements, and RMA processes.
• Monitor and maintain WAN links using tools like SolarWinds, NetBrain, Riverbed, Algosec, and IBM ISM Service Desk.
• Support and troubleshoot VPNs, VLANs, and public cloud connectivity.
• Generate and maintain documentation for network changes, incident reports, and monthly performance metrics.
• Collaborate with cross-functional teams to resolve network-related issues and implement infrastructure upgrades.
• Ensure compliance with SLA and IT security policies.

Technical Skills & Tools:

• Networking: Cisco (CCNP certified), Nexus, RIP, EIGRP, OSPF, BGP, HSRP, STP, VLAN, VPN
• Firewalls: Checkpoint, Juniper
• Servers: Windows Server 2008/2003, Active Directory, FTP, DNS, DHCP, Backup Server
• Monitoring & Ticketing Tools: SolarWinds, NetBrain, Riverbed, IBM ISM, Ichamp, JIRA, CA Spectrum
• Others: Lotus Notes, Blackberry configuration, SSL VPN, Symantec Endpoint Antivirus

Required Skills & Experience:

·      Bachelor Degree in relevant field (e.g.,Computer Science, Information Technology, Engineering).

·      10+ years of experience

·      Willingness to participate in 24x7 supportrotations and on-site activities.

·      Excellent communication and documentationabilities.

·      Strong analytical and troubleshooting skills.

EA License No.: 96C4864

Reg No.: R25128798 HUANG QIMENG

COMPANY DESCRIPTION

YTL PowerSeraya Pte. Limited, a wholly owned subsidiary of YTL Power International Berhad, is in the business of producing, wholesaling, trading and retailing of energy; with a primary focus on electricity. As an established player in Singapore's energy sector, it supplies the country's energy needs through its multi-utilities platform. With a licensed generation capacity of 3,100 MW*, it is one of Singapore's largest electricity generators.

The YTL PowerSeraya Group has three subsidiaries: the retail arm under the Geneco brand provides electricity price plans and energy solutions to homes and businesses, PetroSeraya is the fuel management arm of the Group, and Taser Power which operates Taser Power Plant.

Besides being a Plaque of Commendation (GOLD) awardee at the National Trade Union Congress's May Day Awards 2023, YTL PowerSeraya has adopted three Tripartite Standards under the Tripartite Alliance for Fair and Progressive Employment Practices, and has committed to be a fair and progressive employer. To find out more about the organisation, please visit ytlpowerseraya.com.

*As at 30 Oct 2024, our registered generating capacity with EMA is 2,467.7 MW.

RESPONSIBILITIES

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.

• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.

• Plan and ensure safe and timely execution of plant overhaul activities.

• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.

• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.

• Lead and manage a team of technical officers and technicians.

• Development of staff.

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.

• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.

• Driven self-starter with strong work ethics.

• Team player with strong analytical, technology and communication skills.

• Is available on standby after office hours for emergency calls.

• Knowledge in cyber security will be advantageous.

• Have a safety mindset and display good workplace safety behaviour.

• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Responsibilities:

· Design and coordinate assigned Civil and Structural projects.

· Perform structural analysis and design in building or on anystructures as required by the project.

· Liaise with clients & consultants to meet C&Srequirements.

· Manage and Coordinate to ensure civil and structuralrequirements meet project tender, submission and construction schedule.

Requirements:

· Good degree in Civil / Structural Engineering from a recognizedUniversity

· Preferably 4-5 years working experience in Civil &Structural Consultancy Firm

· Conversant with Building Control Acts & Regulations,Singapore Codes of Practice, Eurocodes and structural programs such as STAAD,TEKLA, ETABS, RAPT, etc

. We regret that this position is open to Singapore Citizens only due to hiring requirements

Your responsibilities include:

• Conceptualize M&E designs and execute the project with the detailed designs.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, submission to authorities and overall on-site construction supervision.

What you will need:

• A recognized university degree Mechanical or Electrical Engineering or Building Services.
• Minimum 4 years’ of relevant experience in design and implementation of building services.
• Strong team-working, communication and interpersonal skills. Able to build good working relationships with client and key stakeholders.
• Open to opportunities to be trained on a wide range of technical and management topics.
• Entry level will be considered for Engineer positions.

Responsibilities

• Executive small-scale BAS projects including program & graphics design. 
• Analyse and resolve implementation issues to meet customer needs 
• Perform BAS preventive maintenance and verify M&V instruments
• Deliver quality work on time 
• Complete site interventions, repairs and commissioning as required 
• Provide technical support for warranty requirements 
• Build and maintain strong customer relationships
• Ensure efficient service to meet department goals
• Maintain test equipment properly
• Comply with all safety procedures

Requirements

• Degree/Diploma in Electrical/Building Automation Engineering
• At least 2 years experience in building automation systems 
• Strong technical problem-solving and solution recommendation skills 
• Familiar with networking, communication protocols, and IT infrastructure 
• Preferably experienced in BCA GM projects 
• Knowledge of HVAC, power meters and SCADA is an advantage 

At ENGIE, every talent has a role to play in accelerating the energy transition. Make a difference and enjoy a fulfilling professional experience. Take on exciting challenges and build a career path that reflects who you are.

Join us and be part of the adventure of the century!

Position Overview

EOS Innovation Singapore is seeking software engineers across a range of experience levels to support the development of advanced defence products. These are hands-on engineering roles embedded within multidisciplinary teams of mechanical, electronic, optical and systems engineers. The work combines software development with real hardware integration, experimental subsystems and evolving product requirements, and will suit engineers who enjoy solving practical problems, working close to prototypes and equipment, and turning emerging capability into robust, production-ready software.

Primary Duties

This role contributes to the design, development, integration, verification and support of software used in complex defence systems. Engineers in this position will work across activities such as equipment interfacing, control and automation, algorithm implementation, user interfaces, test support and system integration. More experienced candidates will be expected to provide technical leadership, guide software design decisions, mentor less experienced engineers and help shape robust engineering practices. Earlier-career candidates will be expected to contribute strongly to hands-on development, integration and problem-solving, while growing into increased technical ownership over time.

Responsibilities

·       Design, develop, test, integrate and maintain software for advanced defence products, ranging from equipment interfacing and control functions to data processing, automation and user-facing applications.

·      Work closely with multi disciplinary engineering teams to integrate software with prototypes, experimental hardware, embedded devices and evolving system designs.

·      Translate engineering requirements into practical software designs and contribute to verification and validation activities to demonstrate performance, safety and compliance.

·      Investigate and resolve technical issues encountered during development, integration, test and production support, including unexpected behaviours at system and equipment level.

·      Produce and maintain clear technical documentation, including design descriptions, interface definitions, test procedures, test records and manufacturing support material.

·      Apply sound software engineering practices, including version control, code review, debugging, testing and configuration management.

·      For more experienced candidates, lead software design activities, contribute to architecture decisions, support design reviews and provide technical guidance to other engineers.

·      Engage with internal stakeholders and customers to clarify requirements, communicate technical progress and support engineering decisions throughout the product lifecycle.

Education and Experience

·       Degree in Software Engineering, Computer Engineering, Computer Science or a related discipline.

·      We welcome candidates across a range of experience levels, from early-career engineers with strong technical foundations to senior engineers with substantial experience delivering software for engineered products or integrated systems.

·      Experience with software development tools and practices, including source control, development environments, compilers, debugging and test tools.

·      Experience in one or more relevant technical areas such as C, C++, Python, embedded or Linux-based development, hardware interfacing, network communications, web-based interfaces, JSON or automated test is desirable.

·      Experience taking software from concept through prototyping, integration, verification and release is advantageous; for senior candidates, this is expected.

·      Experience working in defence, safety-critical, regulated or other high-integrity engineering environments is beneficial.

Skills and Attributes

·       Strong analytical, debugging and problem-solving skills.

·      Practical, hands-on approach and willingness to work closely with hardware, prototypes and multi disciplinary teams.

·      Clear communicator and effective collaborator.

·      Able to adapt to changing requirements and work effectively in an experimental development environment.

·      Self-motivated and able to manage time and priorities within a project environment.

For more experienced candidates, ability to lead technical work, contribute constructively to design reviews and mentor other engineers.

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Location: Pioneer (With company bus pick up)
• Working hours: 8.30am - 5.30pm
• Up to $5,000 (Basic Salary, Depending on experiences)
  

Job Description

Optimizing hard disk storage: Implement strategies to maximize existing storage capacity and explore potential upgrades for significant storage expansion.

Improving sputter machine stability: Focus on enhancing the reliability and performance of the sputter machine and its processes.

1) To lead a group of sputter Engineer Assistant to conduct daily sputtering work

2) To develop new multilayers thin film structure for new hard disk media programs

3) To duplicate hard disk media structure based on design transferred

4) To monitor sputter process & machine stability

5.) Ensure compliance to ISO quality and Safety standards

6) Any other duties as assigned by superior

Job Requirement

・Bachelor/ Master Degree in Materials Science Engineering

・Research fellow in A star research institute (Advantage)

・Working experience more than 2 years in semiconductor field or hard disk industry

・Understanding of Magnetic material multi layers design

・Sputtering machine hardware modification & improvement

・Materials Science Knowledge is a must

・Materials Characterization Skills, ie XRD, AFM, ESCA/XPS is a must

・Thin Film manufacturing process, ie PVD & CVD is a must

・Python Coding knowledge is a plus

・SPC (Statistical Process Control) knowledge is a plus

・After work hours commitment needed (twice a week)

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Khoo Tiffany

EA Registration No: R22107626

Pasona Singapore Pte. Ltd.

EA License No: 90C4069

Job Description

• Manage overall project management on new equipment buyoff, installation and associated activities.
• Collaborate with internal and external stakeholders for smooth production transfer of equipment to mass production.
• Collaborate with machine suppliers to drive for equipment efficiency and process improvement.
• Work closely with PM team in establishment of effective PM system for continuous sustenance of machine and spare inventory.
• Identify and close gaps between different working level or parties within the company.
• Develop expertise to improve the assigned equipment platform, maintain and repair semiconductor process equipment.

Requirements

• Degree / Diploma in any Engineering field with relevant hands-on experience.
• Knowledge and experience in handler models (Epson/Hontech-Logic/ATC/SLT/Matrix/MT9510/Castle/Chroma) will be an added advantage.
• Possess strong mechanical / electronics / electrical knowledge and interest.
• Effective communication and interpersonal skills.
• Logical analysis / thinking and possess strong motivation to hone hands-on technical skills.