Total 84 logistic assistant job vacancies in Engineering category

Job Description

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• Fresh graduates are also encouraged to apply.
• Working Location: Pasir Ris

Eigen is a startup in renewable energy. The systems integrator is focused on providing clean energy to all customers, and their end-users, and is equally as dedicated to supporting their employees and value what makes each individual different and encourage them to act on their ideas.

Description:

We are looking for an Assistant Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

You will see a system project through from end-to-end, covering:
- installation,

- commissioning,

- utilisation, and

- maintenance

Responsibilities:

• Plan system configurations based on customer needs and site conditions
• Assemble materials and structures, and perform installations in accordance to intended design and local codes
• Connect hardware to the electrical system and conduct testing and commissioning of systems while monitoring and ensuring quality of installations
• Conduct site inspections and/ or support checks and inspections to validate installation completions to meet project requirements
• Coordinate with O&M, technical / engineering resources / contractors / authorities for execution of the project.
• Solve any technical problems and conduct the troubleshooting of systems
• Participate actively in key project such as cost reduction, system improvement, process capability (Cpk) improvement, new equipment system development and qualification, new material evaluation/qualification, etc.

Requirements:

• Diploma / Higher NITEC, NITEC in Electrical, Mechanical, Civil Engineering or related fields
• Entry level candidates are welcome.

Good to have:

• Working experience in the field of equipment maintenance is advantageous.

Job Description :

- Responsible for all the execution of contracts progress

- To assist in mechanical / Electrical system design

- Installation progress as well as co-ordination with Clients, Consultants, main contractor, Subcontractors & authorities to ensure efficient and timely delivery assignment

- Report & monitor of progress of project to Project manager / Assistant Project Manager / Senior Engineer

- To co-ordinate meetings & daily briefing at site

- To guide & supervise Assistant Engineers / Supervisors

- To check all installation drawings & prepare relevant schedule

- To prepare cost estimation ,budget & control & to check sub-contractor’s progress claim

- To monitor & supervise work progression, Quality Control & ensure that safety regulation is observed

- To perform testing and commissioning at work site

- Maintain proper record in all M&E Issue

Requirements :

Diploma or Degree in Mechanical /Electrical

Min. 2 years’ experience in Mechanical / Electrical system design

Good site management &@ supervision skills

Good interpersonal skills

Strong Knowledge of M&E details, working drawings and local construction practices

Knowledge in Microsoft & autocad

Job Summary

You will draft and prepare project drawings, ensure design compliance with specifications, coordinate site activities, and integrate machines to support project success. Collaborate with teams to meet technical requirements and perform assigned duties effectively.

Responsibilities

• Interpret mechanical drawings, electrical drawings, and electronics schematic/wiring diagrams to support project design and implementation
• Draft and prepare detailed drawings for project proposals and execution
• Verify that design and proposal drawings comply with specified technical requirements
• Collaborate with project teams to ensure all specifications and standards are met throughout project phases
• Coordinate site activities and verify drawings on-site to ensure accurate implementation
• Integrate machines into project systems to meet operational requirements
• Execute other ad-hoc duties as assigned by supervisors to support project goals

Preferred competencies and qualifications

• Nitec, Diploma, or Degree in Electronics, Mechatronics, Mechanical, Computer Engineering, or equivalent
• Experience designing and developing applications using programming languages such as Python, C++, or Java
• Effective communication and interpersonal skills to facilitate teamwork and stakeholder engagement
• Ability to work independently while contributing positively as a team player

Overview:

The Assistant Engineer will support the Engineer or Lead Engineer in supervising field operations, coordinating fault rectification works, and maintaining proper records in CWMS/CFEMS for street lighting and commuter facilities.

Key Responsibilities:

• Assist in overseeing site works, inspections, and testing.
• Prepare basic reports, update CWMS/CFEMS entries, and assist in work coordination.
• Follow up with contractors and technicians on rectification timelines.
• Ensure safety and quality standards are met on-site.

Requirements:

• Diploma or ITE Certification in Engineering (Electrical, Civil, or Mechanical).
• Min. 1 year of working experience preferred (Fresh graduates may be considered).
• Willingness to learn and work in a dynamic field-based environment.
• Familiarity with fault-logging systems (CWMS, CFEMS) is a bonus.

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Technician/Assistant Engineer
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operate and monitor equipment for surface treatment (e.g. UV-ozone or plasma), screen printing of conductive and dielectric inks, thermal curing, enzyme dispensing, and pattern cutting (e.g. laser or die cut).
• Maintain production records and documentation.
• Perform basic checks on product quality during production.
• Help improve processes and support pilot production runs.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• ITE – Higher Nitec or equivalent.
• Experience in printed electronics, screen printing, micro dispensing, or biosensor/flexible circuit manufacturing is a plus.
• Good attention to detail and troubleshooting skills.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78155 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Assistant Mechanical Engineer
• Working Location: Commonwealth
• Working Hours: 5 days (Mon – Fri, 8.30am – 6.00pm)
• Salary Package: Basic salary up to $3,300 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help in creating mechanical system designs, including calculations, selecting components, and making drawings.
• Prepare detailed engineering drawings and specifications for mechanical parts and systems.
• Review and verify design calculations for accuracy.
• Monitor project progress according to schedule and budget.
• Maintain project documentation, including technical reports and meeting notes.
• Coordinate with vendors and subcontractors to ensure timely delivery of materials and services.
• Assist with the on-site installation and setup of mechanical systems.
• Conduct quality checks on installed equipment and materials.
• Identify and troubleshoot technical issues during construction.
• Prepare purchase orders for mechanical components and equipment.
• Evaluate vendor proposals and source materials based on specifications.
• Research new technologies and materials relevant to mechanical engineering projects.
• Analyse engineering data to identify potential issues and suggest solutions.

APPLY NOW!!!

• Diploma or Degree in Mechanical Engineering or a related field.
• Solid understanding of mechanical engineering principles, including material and design, assembly techniques.
• Skilled in utilizing Solidworks software for drawing creation and modification.
• Ability to read and interpret technical drawings and specifications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74457 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Cleantech Loop (Jurong West)
• Working Hours: 5 days (Monday to Friday 9AM – 6PM)
• Salary Package: Basic Salary up to $3,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Design and develop hardware for battery protection circuits, including choosing and controlling contactors and relays.
• Create and develop battery sensor circuits, focusing on circuit design, component selection, and testing/calibrating sensors for voltage, current, and temperature.
• Develop software for battery protection schemes in the Battery Management System (BMS), covering protections for over/under voltage, current, and temperature.
• Evaluate the battery's State-of-Charge (SoC) and develop the related firmware in the BMS.
• Research, compare, and select the appropriate microcontroller unit (MCU) to implement the BMS firmware.

APPLY NOW!!!

• Higher Nitec/Diploma in Electrical or Power Engineering, or equivalent.
• Experience in designing and testing BMS protection circuits.
• Firmware development skills for MCU in battery protection.
• Skills in designing and testing measurement circuits in BMS.
• Experience with sourcing and procuring electrical components.
• Skills in project planning and implementation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #71570 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

JOB DESCRIPTION:

Department: QC Department (MES-Tuas)

Report to: Evaluation Section

Functional Relationships with: To support evaluation section and work closely with engineer to ensure smooth operation of test laboratory and product reliability/safety evaluation to achieve design change qualification and product reliability

POSITION PROFILE:
Based in: Singapore
Job site: Tuas
The successful candidate will collaborate and participate in operation improvement activities with operation members

KEY DUTIES & RESPONSIBILITIES:

• Plan and conduct reliability/safety tests and evaluation to qualify, improve or evaluate the products.

• Design and fabricate fixture required for product under test.

• To write and file test reports per requirement.

• To write and update SOPs and procedures as required by relevant test and equipment.

• Daily operation of test laboratory.

• Maintain all laboratory equipment in good working condition order.

• Ensure maintenance and calibration of laboratory equipment are carried out in accordance schedule.

• Monitor and maintain of inventory.

• To ensure good housekeeping of the test laboratory.

• Other duties as assigned by the supervisor.

ABILITY/COMPETENCY REQUIRED:

• Diplomas in Mechanical / Electronics / Electrical engineering with relevant experiences.

• Experience with lab operation.

• Good knowledge of Microsoft Office application.

• Possess good analytical and troubleshooting skills.

• Able to work independently with minimum supervision on a tight schedule.

• Able to do overtime when necessary.

• Knowledge of Visual basic application / International battery regulation will be an advantage.

About the Role:

• Oversee design, installation, and commissioning of electrical systems (lighting, power distribution, ELV systems) for residential, commercial, or mixed-use developments.

• Manage electrical works across project lifecycle—from tendering and contractor coordination to site supervision and handover.

• Plan and oversee preventive and corrective maintenance of building electrical systems to ensure safety, reliability, and compliance.

• Ensure all electrical installations meet regulatory standards (e.g., local codes, safety regulations) and conduct periodic inspections/audits.

• Liaise with contractors, consultants, property managers, and authorities for electrical works, upgrades, and issue resolution.

About You:

• Diploma or Degree in Electrical Engineering or related field.

• 8–10 years of hands-on experience in electrical projects and maintenance, preferably within real estate, property management, or construction environments.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;

• Career development and a promote from within culture;

• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

• Attending site meetings with consultant / main con
• Study of drawing details and coordinate with consultant and main contractor to resolve any technical / site issues
• Ensuring that works on site are carried out according to specifications/ drawing
• Inform Project Director or Project Maanger on any technical / site problems arising
• Supervising the progress of work on site
• Ensure that the work on site is on schedule and submit claim for work carry out

Requirements:-

• 1 year work experience preferred
• Minimum Nitec in electrical / Mechanical engineering
• Familiar with ACMV / HVAC system
• Able to work independently and a good team player

Interested applicants please email your resume: elaine@cancan.sg

** Only suitable candidates will be contacted for interview

Responsibilities:

• Assisting engineers with the design, creation, and assembly of machines, systems, and their components.
• Performing tests and inspections to verify designs and ensure quality control, which may involve using measurement metrology or engineering simulations.
• Supporting the repair, maintenance, and troubleshooting of systems and equipment
• Following workplace safety and health (WSH) procedures, preparing documentation, and ensuring compliance with relevant standards (e.g., ISO 9001, ISO 14001, ISO 45001).
• Working closely with engineers, project teams, and technical support staff to meet project requirements and provide feedback.
• Applying specific technical skills related to the project, which could range from using automation control for machines to working with software development lifecycle methodologies. 

Requirements

• Min Diploma in Mechanical, Electrical, Computer Science or relevant
• Min 1 year of working experience

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

An exciting opportunity has arrived at The Garcha Group, Singapore’s boutique hotel group currently with the following hotels:

- Maxwell Reserve, Autograph Collection Hotel (Marriott);

- The Vagabond Club, a Tribute Portfolio Hotel (Marriott);

- The Serangoon Club, a Tribute Portfolio Hotel (Marriott).

Restaurants & Bars:

· Shikar, Isabel Brasserie, Polo Bar Steakhouse & Cultivate (Maxwell Reserve)

· Whiskey Library & Jazz Club (The Vagabond Club)

· GupShup (The Serangoon House)

Garcha Group Benefits:

- As an associate of a Marriott hotel, you, your parents or parents-in-laws, children, spouse/domestic partner and siblings are eligible for discounts on F&B and room rates in 7,000+ hotels world-wide.

- As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalized learning experiences designed to help you thrive in their Marriott career journey. (see attached for full Marriott benefits)

- 2 nights yearly staycation in any of the Garcha Group hotels in Singapore.

- 20% off Food/Alcohol Bill at all Garcha Group restaurants and bars

Responsibilities include but are not limited to:

- Review all facilities with an aesthetic eye for detail;

- Be well-organized and able to be hands-on to trouble-shoot and fix issues related air conditioning (Daiken VRV), plumbing, humidity related issues, all M&E issues, service provider management, and optimize efficiency while reducing operating costs.

- "Can-do" attitude with resourcefulness and phenomenal efficiency can set you apart among our candidate pool.

- The goal is to ensure our accommodations is problem-free.

- Managing the upkeep of equipment and supplies to meet health and safety standards;

- Trouble-shoot, plan and coordinate all installations and repairs of (telecommunications, heat, electricity etc.) and refurbishments;

- Hands-on as well as manage the upkeep of buildings, equipment and supplies to meet health and safety standards;

- Inspect buildings’ structures to determine and implement the need for repairs;

- Obtain comparative quotations;

- Review utilities consumption and strive to minimize costs;

- Supervise foreign staff facilities staff (handy-men) and external contractors;

- Control activities like waste disposal, building security etc.;

- Handle insurance plans and service contracts;

- Keep financial and non-financial records;

- Maintain all trackers.

- Any other jobs requested by management.

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Engineering Assistant
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Plan and manage production processes, equipment, and procedures.
• Design production workflows and provide clear work instructions.
• Ensure products meet quality and specification standards.
• Use tools like time study, SPC, FMEA, and others to improve efficiency.
• Propose solutions to prevent product quality issues.
• Design and verify jigs and fixtures for production.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• Minimum NTC 2/3 in Precision Engineering (with relevant experience).
• Basic knowledge of CNC machining (Milling or Turning),
• Familiar with CAD/CAM software (AutoCAD and Mastercam),
• Proficient in Microsoft Word, Excel, Outlook.
• Individuals without experience are encouraged to apply, training is provided.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78154 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131