Total 2,889 Senior Executive software engineer job vacancies in Singapore

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Manage overall project management on new equipment buyoff, installation and associated activities.
• Collaborate with internal and external stakeholders for smooth production transfer of equipment to mass production.
• Collaborate with machine suppliers to drive for equipment efficiency and process improvement.
• Work closely with PM team in establishment of effective PM system for continuous sustenance of machine and spare inventory.
• Identify and close gaps between different working level or parties within the company.
• Develop expertise to improve the assigned equipment platform, maintain and repair semiconductor process equipment.

Requirements

• Degree / Diploma in any Engineering field with relevant hands-on experience.
• Knowledge and experience in handler models (Epson/Hontech-Logic/ATC/SLT/Matrix/MT9510/Castle/Chroma) will be an added advantage.
• Possess strong mechanical / electronics / electrical knowledge and interest.
• Effective communication and interpersonal skills.
• Logical analysis / thinking and possess strong motivation to hone hands-on technical skills.

Responsibilities of a Senior Geotechnical Engineer (LTA Tunnelling project)

· In charge of reviewing design drawings and shop drawings, monitor progress of drawing, coordinating with design consultants and site teams, review quantities with cost control department.

· Leading draftsmen in designing, calculating and drafting, coordinating with client, construction team, authorities and stakeholders, cross checking quantities with independent third party and providing design service during construction stage.

· In charge of tunnel structure technical scheme design, structural calculation, quantity check, design drawing review.

· In charge of structure technical scheme design, structural calculation, quantity check, design drawing review

· Draft and calculate the thin-walled concrete within the station like platform, concrete ventilation, stairs, and inter layers, and providing design service during construction stage.

· Making and monitoring progress of design, leading the team of draftsmen in designing and drafting, coordinating with engineers of different disciplines, clients, applying for NOC from authorities and stakeholders and providing design service during construction stage.

· Designing layout and cross section of the station, passenger flow design, firefighting design and coordinating with design team, client, authorities and stakeholders. The working stage from concept design to final design.

· Coordinating with all system discipline including MEP, telecommunication, signal, fire alarm system, building alarm system, integrated supervisory control system and the like, arranging all pipelines of different disciplines within the inner space of station, avoiding conflicts among all pipelines before construction.

Requirements:

· Degree/Master in Geotechnical/ Civil/ Mining Engineering

· More than 8 years of Geotechnical engineering experience

· At least 5 years of experience in the construction industry and with supervision for projects of similar scale and complexity

· Ability to thoroughly analyse and research information.

· Driven, proactive and mature working attitude.

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Key Responsibility

1. To be responsible for all the execution of Contracts progress.
2. To monitor the installation progress as well as co-ordination with Clients, Consultants, Subcontractors to ensure efficient and timely delivery of assignment.
3. To report and monitor of progress of project to Project Manager.
4. To supervise and ensure works are in accordance to the contract drawings and specifications.
5. To prepare method statement, shop drawings, installations / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.
6. To coordinate with subcontractors and consultants on preparation and submission of shop drawings.
7. To coordinate / prepare technical submissions with suppliers / subcontractors.
8. To assist the Project Manager to negotiate / procure materials, equipment and labour in accordance to the allocated approved budget.
9. To hold technical discussions with various stakeholders to resolve technical / site issues.
10. To liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.
11. Mechanical: Familiar with ACMV, Cleanroom, Fire protection
12. Process utilities facilitation and hook-up: Familiar with PCW, AEX, SOX, GEX, RODI, TCW, CDA, N2, City water.

Requirements

1. B.Eng in Mechanical/Electrical/Civil with 6–8 years’ EPC/EPCM experience.
2. Min. 6-8 years of experience in construction industry in Singapore, preferable in Semiconductor Factory Cleanroom projects.
3. Good knowledge of Mechanical and Process.
4. Good in interpersonal skill, able to communicate and coordinate effectively with Client, Consultants, Project Teams and other Parties.
5. Good oral and written communication skills
6. Good in people skill .
7. Proficient in AutoCAD, Microsoft Excel & Powerpoint.
8. Well verse in English.
9. Mobility : As when needed.
10. Able to work independently and under high pressure environment.
11. Detail oriented.
12. Strong engineer sense and common sense.
13. Strong team player and ability to multi-task.
14. Fast learner.

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works and coordination with consultants
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 6 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead cleanroom design and planning for semiconductor projects
• Develop cleanroom layouts, zoning, airflow, and pressure control concepts
• Coordinate cleanroom requirements with HVAC, electrical, and process teams
• Review cleanroom materials, finishes, and system specifications
• Support installation, testing, and commissioning of cleanroom systems
• Ensure contamination control and cleanroom protocols are met
• Resolve design and site-related cleanroom issues
• Liaise with clients, consultants, and contractors
• Ensure compliance with cleanroom standards and Singapore regulations
• Mentor junior engineers and designers
• Any other ad-hoc duties as assigned
  
  

Requirements

• Bachelor’s Degree in Mechanical, Chemical, or related Engineering field
• Minimum 5 years of cleanroom or semiconductor facility design experience
• Strong understanding of contamination control and cleanroom standards
• Proficient in AutoCAD or Revit
• Strong coordination and leadership capabilities
• Proficiency in Mandarin is required to liaise with Mandarin-speaking stakeholders, suppliers and project counterparts.

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead piping design for semiconductor and industrial facilities
• Develop layouts for process piping, UPW, chemical, and utility systems
• Perform pipe sizing, material selection, and stress considerations
• Review isometric drawings, layouts, and technical submissions
• Coordinate piping design with HVAC, cleanroom, electrical, and process teams
• Provide technical support during installation and commissioning
• Resolve design clashes and site-related piping issues
• Liaise with vendors and contractors on piping materials and standards
• Ensure compliance with project specifications and Singapore regulations
• Mentor junior engineers and review their design work
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Mechanical Engineering or related field
• Minimum 5 years of piping design experience, preferably in semiconductor projects
• Strong knowledge of process piping, UPW, and industrial utility systems
• Proficient in AutoCAD, 3D piping software, or Revit
• Good understanding of fluid mechanics and piping standards
• Strong coordination and leadership skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

Job Role

As a Senior QAQC Engineer, you will play a pivotal role in ensuring that all construction projects meet the highest quality standards and comply with regulatory guidelines. You will lead quality assurance initiatives and collaborate with various teams to uphold a commitment to excellence in delivery.

Key Responsibilities

Quality Management System

Implement and maintain the organization’s Quality Management System (QMS) to ensure compliance with industry standards and regulatory requirements.

Project Quality Planning

Prepare and oversee Project Quality Plans (PQP) for all construction projects, ensuring thorough quality control measures are outlined and implemented.

Inspections and Audit

Conduct regular inspections and audits of materials, processes, and deliverables to identify defects, non-conformances, and areas for improvement.

Stakeholder Collaboration

Collaborate with project managers, engineers, subcontractors, and suppliers to ensure alignment with quality standards and project schedules.

Regulatory Compliance

Analyze and assess suppliers and subcontractors for certification compliance with relevant build and construction authorities, ensuring quality requirements are met.

Continuous Improvement

Propose and implement continuous improvement initiatives to enhance the effectiveness of the quality management system.

Data Analysis

Collect and analyze data related to quality metrics to identify trends, assess performance, and implement corrective actions as needed.

Documentation Management

Maintain comprehensive records of all quality assurance activities, including audits, inspection reports, and quality control plans, in accordance with ISO standards, while ensuring accessibility for review and compliance purposes.

Environment, Health and Safety Compliance

Ensure that all projects adhere to workplace health and safety policies, conducting assessments and audits as necessary to mitigate risks.

Ad-hoc Duties

Perform other duties and responsibilities as assigned by management to support overall project objectives.

Job requirements

• Bachelor’s degree in quality assurance engineering, civil engineering, or a related field.
• Requires 5-7 years of relevant experience in the building and construction industry, preferably with main contractor experience on large-scale projects.
• Resident Technical Officers (RTO) certification
• Quality Mark / CONQUAS certification
• ISO9001 Auditor certification & proficient understanding of quality assurance methodologies, inspection techniques, and quality control processes.
• Excellent communication skills and ability to interact effectively with multidisciplinary teams and stakeholders.
• Ability to thrive in a dynamic and fast-paced environment, effectively managing multiple tasks and adapting quickly to changing priorities while maintaining high levels of productivity and focus.
• Strong organizational skills, a keen eye for detail, and excellent planning and coordination abilities.

The Senior Design Engineer is responsible for assisting the Senior/Technical Manager on structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis.
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications, and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers, and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 6 to 8 years of experience in design and construction
• At least 5 years of civil MRT station experience (have completed at least 1 MRT station project)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.
• Well versed in Autocad and BIM software is preferred.
• Technical Competencies: Technical expertise and knowledge in Foundation, Structural and Civil works (MRT Stations).

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead HVAC design development for semiconductor and cleanroom facilities
• Perform cooling load calculations, system sizing, and equipment selection
• Prepare and review HVAC layouts, ducting, and airflow designs
• Coordinate HVAC design with cleanroom, electrical, piping, and process teams
• Review shop drawings, technical submissions, and method statements
• Support installation, testing, and commissioning of HVAC systems
• Troubleshoot design and site-related HVAC issues
• Liaise with clients, consultants, vendors, and contractors
• Ensure compliance with BCA, NEA, WSH, and project specifications
• Mentor junior engineers and provide technical guidance
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Mechanical Engineering or related field
• Minimum 5 years of HVAC design experience, preferably in semiconductor or industrial projects
• Strong knowledge of HVAC systems, heat transfer, and airflow control
• Proficient in AutoCAD, Revit, or similar design tools
• Experience in cleanroom HVAC systems is highly preferred
• Good coordination, leadership, and problem-solving skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

• Location: Woodland
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM –12:30 PM)
• Willingness to commit to extended hours & night shift

Job Responsibilities

• Lead the development and review of mechanical designs, schematics, and layouts for HVAC, ultra-pure water (UPW), cleanroom ventilation, process piping, and specialty gas distribution systems.
• Perform and validate complex load calculations, equipment sizing, system modelling, and material selection to meet stringent semiconductor facility requirements.
• Provide technical oversight for thermal management, vibration control, and contamination-prevention strategies in cleanroom and sub-fab environments.
• Lead and supervise installation works for pumps, compressors, heat exchangers, cooling towers, and mechanical utility systems, ensuring compliance with design intent and quality standards.
• Coordinate closely with civil, electrical, process, and tool-installation teams to ensure seamless integration of all mechanical systems.
• Ensure strict adherence to cleanroom protocols and contamination-control requirements during construction and installation.
• Troubleshoot complex mechanical system issues and provide engineering solutions during commissioning, start-up, and qualification stages.
• Manage and oversee vendor and contractor performance, ensuring timely delivery, quality workmanship, and alignment with project milestones.
• Ensure compliance with BCA codes, WSH regulations, NEA requirements, and relevant SEMI/ASHRAE/ISO standards.
• Review and approve mechanical method statements, shop drawings, material submissions, testing procedures, and commissioning documentation.
• Any ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Mechanical Engineering or equivalent.
• Minimum 5–8 years of relevant experience in semiconductor wafer fabs, cleanrooms, data centres, pharmaceutical plants, or complex industrial facilities.
• Strong expertise in HVAC, process piping, UPW, specialty gas, and mechanical utility systems.
• Proficiency in AutoCAD, SolidWorks, Revit, or similar mechanical design and modelling software.
• Strong knowledge of SEMI standards, ASHRAE cleanroom guidelines, and ISO 14644.
• Solid understanding of thermodynamics, fluid mechanics, system integration, and mechanical safety engineering.
• Proven ability to lead coordination with multidisciplinary teams and manage contractors effectively.
• Strong problem-solving skills with the ability to resolve complex technical issues independently.
• Must be able to communicate in Mandarin to be able to liaise with Mandarin speaking associates

• Responsible for piping layout and engineering related activity not limited to Pipe and Pipe support design, Piping Material Handling activity,Piping Material Engineering activities like MTO (bulks, manual valves, SP items, Pipe Support), Requisitions, Supplier drawings review, Pipe Stress Analysis activities like preparation of stress critical line list, analysis using Caesar II, report preparation, Spring data sheet preparation, supplier drawing reviews, pipe isometric and pipe support checking, piping line listpreparation etc
• Coordinate on project specific issues with the respective subject specialist Lead
• Be responsible for the technical integrity for compliance to project HSE requirements relevant to the scope of work.
• Work closely with the piping lead / subject specialist lead of the project to understand their requirements and address on time. Develop reports as required by the lead.
• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to subject specific lead for quick resolution.Plan tasks and issue the deliverables as per company procedures.
• Issue of discipline deliverables in project specific templates.
• Be familiar with the workflows in the project. Taking initiative and provide any input to the Piping Lead / Subject specialist lead on time and highlight in advance if there are any technical challenges.
• Coordinate actively with other offices, for the projects being executed from multiple locations, attend meetings, and communicate effectively.
• Review and provide technical inputs as required by the Project.
• Based on the client specifications, follow project specific procedure related to Piping Layout and Engineering.
• Be responsible for the deliverables and to ensure that the design complies with the specification, integrity, and quality requirements of the project.
• Be responsible in finalization piping systems requirements such as, PED and testing requirements of NDT, hydro and pneumatic in line with the project requirements.
• Be responsible to procurement support for the Piping components, the activities vary from finalization of MTO, placing purchase orders in the systems, valuation of technical offers from the suppliers and ensuring the timely delivery with full project compliance.
• Be responsible for and manage the technical interfaces with equipment and package suppliers, as appropriate, to ensure compliance to Standards &Project Specifications
• Provide technical support to the project to obtain necessary approvals from the verification body / classification society or other applicable approving authorities.
• Represent Piping Discipline in meetings, discussions, audits, verifications, workshops, and technical reviews that relates to piping and be responsible for closeout of actions identified as required.
• Be responsible to align to the progress of Piping Engineering scope and internal and supplier deliverables, where applicable, as per the schedule of the project.
• Be responsible for Management of change within the scope of work for the Piping Discipline on assigned projects.
• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to piping material lead for quick resolution.Plan tasks and issue the deliverables as per company procedures.
• Issue of discipline deliverables in project specific templates.

Work Experience

• Must have a minimum of 12 years of experience having worked in an engineering setup for upstream oil & gas projects (platforms & FPSO projects) serving in the capacity of a Senior Piping Engineer.
• Experience in Software usage for Piping material quantity estimate, Procurement planning, CaesarII, E3D, Navis etc. material traceability and delivery to site.
• Experience in Norwegian projects and applicants experience tothe relevant standards, NCS and UKCS sectors preferred.
• Must have had prior work experience with medium/large sized brownfield and green field projects in the Oil and Gas sector with similar roles and possess an excellent understanding of project phases, milestones, and deliverables.
• Must have in-depth knowledge in Piping and cost-effectiveness, with a proven track record on projects in the upstream oil and gas sector.
• Must possess a thorough understanding and knowledgeof oil and natural gas industry standards suchas, but not limited to, ASME, API (American Petroleum Institute),BS, European Regulations and other relevant standards and guidelines.
• Experience in FPSO projects and HPHT services preferred.

Qualifications

• Must have a minimum bachelor’s degree in mechanical / Material Engineering or other equivalent engineering specialisation.

Other Skills

• Must possess design experience with respect to typical Piping Engineering deliverables, such as, specifications, data sheets (bulks, valves, SP items), MTO, TQ, TBA, Stress critical line list, Stressreports, Isometrics, Pipe Support Drawings, Piping Lists, and Supplier Drawing Reviews.
• Must have excellent technical communication (oraland written) skills with proven ability to present technical issues to designteams, client technical authorities, and client’s project managementrepresentatives and approving bodies.
• Must be a self-starter and be able to work withminimal supervision, make sound decisions, take independent action, analyseproblems, and provide focused solutions to assigned projects.
• Shall possess strong inter-personal andcommunication skills and be able to work well with people at all levels in theorganization.
• Have used common business software applications such as MS Office, MS Excel, Caesar II.
• Must be familiar with using Navisworks

We regret only short listed candidates will be notified.

JOB DESCRIPTION

Ride on the wave of Industry 4.0! Join STYL Solutions in the forefront of using Fintech and IoT technologies for smart city/nation transformation.

Headquartered in Singapore with R&D center in Vietnam, STYL Solutions designs, develops and supplies hardware, software and integrated solutions for applications in payment, loyalty management, location tracking, self-service operation, telemetry. Our market segment coverage extends from financial services, retail, mass transit, education to social services markets in Singapore and South Asia Pacific.

Our vision is to use Fintech and IoT to create smart and efficient cities that enhances Quality of Life through convenience and healthier living.

JOB RESPONSIBILITIES

• Handle quality issues arising from market feedback by collaborating closely with factories, suppliers, and engineering teams to identify root causes and drive technical or design-related improvements.
• Lead the investigation and analysis of product and component quality problems; conduct root cause analysis and propose effective Corrective and Preventive Actions (CAPA).
• Track and ensure the timely implementation and proper closure of CAPAs through cross-functional collaboration.
• Oversee management of non-conforming parts and coordinate with suppliers to implement corrective quality improvements.
• Review and assess assembly factory process work instructions, inspection protocols, and test plans for compliance with regulatory standards and customer requirements.
• Support and conduct on-site audits, and follow up on continuous improvement initiatives.
• Prepare quality plans, inspection standards, and documentation to meet client and project-specific quality requirements.
• Define and develop appropriate test methodologies and inspection criteria based on product design and manufacturing processes.
• Compile and deliver failure analysis (FA) reports to customers, including detailed root cause findings and recommended corrective actions.
• Apply quality tools (e.g., QC 7 tools, Pareto Chart, Fishbone Diagram, 5 Whys, PDCA Cycle) for structured problem-solving and trend analysis.
• Maintain accurate and comprehensive quality records and reports to ensure traceability, compliance, and process stability.

JOB REQUIREMENTS

• Degree in Engineering or related field, preferably in Electronics, Mechatronics.
• Minimum 5~10 years of experience in Quality or Process Engineering in a manufacturing environment.
• Strong knowledge of quality systems, tools, and methodologies, including 8D, Fishbone, Pareto, 5 Whys, and PDCA.
• Hands-on experience in component quality control—electronics, electromechanical parts, plastics, or metals.
• Ability to read technical drawings and define inspection standards.
• Proficient in MS Office and basic data analysis; capable of using statistical methods to interpret quality trends.
• Strong analytical and organizational skills; attention to detail with a results-oriented mindset.
• Effective verbal and written communication skills in both English and Chinese (to handle our Chinese supplies/ vendors) is preferred.
• Capable of preparing technical reports and communicating with internal and external stakeholders.
• Experience working with ISO management systems is preferred.
• Reliable, trustworthy, and willing to engage directly in on-site problem solving.

Job Description:

• Provide application support to achieve the Critical Dimension Scanning Electron Microscopes (CD-SEM) performance required by the customer which includes creation of measurement recipes and optimization of measurement conditions.
• Analyze, interpret, and present application results to customers, providing technical recommendations.
• Provide expert guidance to customers in the creation, optimization, and deployment of CD-SEM recipes at their sites.
• Examine solutions for measurement challenges in cutting-edge semiconductor devices, and propose optimized conditions, additional tool adjustments, and new applications.
• Investigate the root cause of any measurement issues on the CD-SEM and implement counter measures in collaboration with related departments mainly located in Japan.
• Conduct applications training for customers and engineers

Requirements:
• Possess over 7 years of professional experience as an Application Engineer specializing in Critical Dimension Scanning Electron Microscopes (CD‑SEM).

• Comfortable working with problem-based situation, equipped with problem solving skills and capable of handling sudden situations.

• Comfortable working in cleanroom environment when needed

• Ability to work independently as well as in a team.

• Possess effective verbal and written communication skills, enabling clear technical discussions with customers and internal stakeholders.

·      Willing and able to travel frequently, including on short notice, to support customer sites and business requirements.