Total 402 construction engineer job vacancies in D26 Upper Thomson, Springleaf

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements.
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection C&S, M&E and geotechnical works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to C&S, M&E and geotechnical works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of civil engineering experience of which at least 3 years shall be in supervision of

1. major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.

2. Viaduct, road/expressway works, geotechnical and deep excavation works

• Degree in Civil Engineering recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.
• Must have Airport flexible and rigid pavement experience for ariport project

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc..
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection M&E works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to M&E works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of civil engineering experience of which 3 years of experience in major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.
• Degree in Mechanical or Electrical Engineering recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.

THE ROLE: 

The focus of this role is to plan, build, and execute the verification of new and existing features for AMD’s SerDes IP, resulting in no bugs in the final design.   

THE PERSON:  

You have a passion for modern, complex SerDes architecture, digital design, and verification in general. You are a team player who has excellent communication skills and experience collaborating with other engineers located in different sites/timezones. You have strong analytical and problem-solving skills and are willing to learn and ready to take on problems. 

KEY RESPONSIBILITIES:  

• Collaborate with architects, hardware engineers, and firmware engineers to understand the new features to be verified 
• Build test plan documentation, accounting for interactions with other features, the hardware, the firmware, and the software driver use cases 
• Estimate the time required to write the new feature tests and any required changes to the test environment 
• Build the directed and random verification tests 
• Debug test failures to determine the root cause; work with RTL and firmware engineers to resolve design defects and correct any test issues  
• Review functional and code coverage metrics – modify or add tests or constrain random tests to meet the coverage requirements 

PREFERRED EXPERIENCE:  

• Proficient in IP level ASIC verification 
• Proficient in debugging firmware and RTL code using simulation tools  
• Proficient in using UVM testbenches and working in Linux and Windows environments 
• Experienced with Verilog, System Verilog, C, and C++   
• Digital design, Analog Design, SerDes, PCIe and Ethernet knowledge 
• Developing UVM based verification frameworks and testbenches, processes and flows 
• Experienced with Co-Sim and UPI verification.
• Automating workflows in a distributed compute environment.   
• Exposure to simulation profile, efficiency improvement, acceleration, HLS tools/process 
• Strong background in the C++ language, preferably on Linux with exposure to Windows platform 
• Good understanding and hands-on experience in the UVM concepts and SystemVerilog language 
• Good working knowledge of SystemC and TLM with some related experience.   
• Scripting language experience: Perl, Python, Makefile, shell preferred.   
• Exposure to leadership or mentorship is an asset 
• Desirable assets with prior exposure to video codec system or other multimedia solutions.   
• Experienced with ChatGPT, MS-Copilot and other AI tools.

ACADEMIC CREDENTIALS:  

• Bachelors or Masters degree in computer engineering/Electrical Engineering 

Responsibilities

Source for suppliers and sub-contractors for quotations/tendering.

Preparing BQ, Measurement and progress claim.

Assist Project Manager with other duties as may be required from time to time

Requirements

Diploma in Quantity Surveying or Building or its equivalent.

( Preferred Work Experience in Renovation & Landed Houses )

Minimum 5 years relevant experience in construction related industry

Able to work independently with minimum guidance and under pressure to meet tight deadlines.

Flexible, detailed and good organisation and planning skills

Job Responsibilities

1. Set up and follow up with project and HQ all staffs hardware, software issue.

2. Set up and daily Maintain project and HQ Server and data security.

3. Set up and maintain project CCTV system.

4. Apply the internet and set up project internet system

5. Purchasing related software or other materials

6. Set up bio matrix system

7. Due with supplier of others software issues

8. Ensure on call support for critical IT services work with relevant resolver group.

9. Manage IT opportunities, risks and challenges pertaining to IT user help desk operations.

10. Others IT related meter request by management.

Job Responsibilities:

Hyperscale Server Design Engineer is responsible for designing, validating, and optimizing high-performance server hardware, racks, and infrastructure systems to support massive-scale cloud computing environments. Responsibilities include:

• Conduct server feasibility studies, define and maintain hardware architectures and solutions, and create execution plan.

• Design schematic, create BOM, support prototype/engineering build.

• Guide and work with PCB engineers on layout and placement.

• Design, deploy, and operate large-scale GPU-based compute environments, including optimizing network topologies like InfiniBand and Ethernet.

• Lead server validation and bringing up complex systems, including lab validation, SI/PI (Signal Integrity/Power Integrity) analysis, and debugging.

• Partner with software, datacenter engineering, mechanical and thermal, and vendor teams to ensure seamless hardware/software integration. Drive root cause analysis and corrective actions.

• Apply advanced knowledge of server energy efficiency and power redundancy to optimize for performance and cost.

• Work with manufacturing teams to resolve issues and to support NPI and production builds.

• Provide technical expertise and consultation to peers.

• Maintain consistent high quality of engineering design work to develop robust, high performance and cost effective designs and products.
  

Job Requirements:

• Degree/Master in Electrical/Electronic/Computer Engineering or equivalent

• Minimum of 5-10 years of experience in computer architecture, server design or hardware validation.

• Strong design experience and knowledge in any of the following:

  • Knowledge of GPU/CPU architectures, high-speed interfaces (QSFP-DD/OSFP) and memory interfaces such as DDRx DRAM, NAND/NOR/SPI Flash.

  • High speed interfaces including PCIe, NVLink, GbE, SAS, USB.

  • BMC implementations.

  • High DC voltage power designs and distribution, and thermal management.

  • High-speed Ethernet networking.

  • Experience with liquid cooling is an advantage.

• Understanding integration of software and hardware.

• NPI project execution experience and familiarity with Product Development Life Cycle will be desirable.

• Experience using CAD tools (e.g. Cadence Allegro, Mentor PAD).

• Experience with SI/PI simulation (e.g. ANSYS HFSS/SIWave) and lab equipment like high-speed oscilloscopes and VNAs are added advantage.

• Familiar with ISO9001.

• Troubleshooting skills in high-speed signaling, thermal or power delivery.

• Self motivated and willing to learn new technology and skills who works well under pressure.

• Excellent oral and written communication skills.

Roles & Responsibilities:

• Manage Supervision Team including planning roster shift duties based on Contractor’s work schedules and oversee leave arrangements.
• Provide supervision services for all C&S and M&E works to ensure that contractors comply with contract/authorities'/agencies' requirements.
• Work with the QP(D) / QP(S) to resolve all design and technical issues arising from the construction of Temporary Works and Permanent Works.
• Review and comment on Contractors’ proposals, method statements and designs.
• Lead the REs and RTOs to check all drawings (including shop drawings, construction drawings) and specifications for discrepancies and to report to the QP(S), Contractors or the OIC.
• Overview of the quality system implementation, materials approval and compliance testing procedures
• Monitor project progress, coordinate with scheduler and propose measures to ensure timely completion.
• Monitor and report to the OIC and Contractors on quality, workmanship, WSH and aerodrome safety, security, housekeeping and stakeholder relationship issues of main contractors, sub-contractors and direct contractors/ suppliers at site.
• Carry out inspections and assist Client in taking over of completed works
• Coordinate and compile the As-Built information for record purposes in a timely manner
• Monitor the quality and progress of rectification works during the Defect Liability period of the Works.
• Ensure the efficiency of duty roster to manage the costs incurred by the team.

Requirements (C&S):

• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Minimum 10 years of experience, of which at least 8 years in major construction works in building works, deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.
• Possess a C&S Engineering Degree recognized by the Professional Engineers Board of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report.
• Proficient in contract administration with Public Service Sector Conditions of Contract (PSSCOC).

#01

Roles & Responsibilities:

• Manage Supervision Team including planning roster shift duties based on Contractor’s work schedules and oversee leave arrangements.
• Provide supervision services for all C&S and M&E works to ensure that contractors comply with contract/authorities'/agencies' requirements.
• Work with the QP(D) / QP(S) to resolve all design and technical issues arising from the construction of Temporary Works and Permanent Works.
• Review and comment on Contractors’ proposals, method statements and designs.
• Lead the REs and RTOs to check all drawings (including shop drawings, construction drawings) and specifications for discrepancies and to report to the QP(S), Contractors or the OIC.
• Overview of the quality system implementation, materials approval and compliance testing procedures
• Monitor project progress, coordinate with scheduler and propose measures to ensure timely completion.
• Monitor and report to the OIC and Contractors on quality, workmanship, WSH and aerodrome safety, security, housekeeping and stakeholder relationship issues of main contractors, sub-contractors and direct contractors/ suppliers at site.
• Carry out inspections and assist Client in taking over of completed works
• Coordinate and compile the As-Built information for record purposes in a timely manner
• Monitor the quality and progress of rectification works during the Defect Liability period of the Works.
• Ensure the efficiency of duty roster to manage the costs incurred by the team.

Requirements (C&S):

• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Minimum 10 years of experience, of which at least 8 years in major construction works in building works, deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.
• Possess a C&S Engineering Degree recognized by the Professional Engineers Board of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report.
• Proficient in contract administration with Public Service Sector Conditions of Contract (PSSCOC).

#01

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical, Dwall and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-$2500-$3000

Location: Woodlands

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Responsible for performing duties in accordance with quality system requirements as the voice of customers, understand customer specific requirement and expectation to deliver “Customer satisfaction and complaint.
• Analyse and proper handling of customer complaint, return products and corrective action verification and tracking of customer Engineering change to ensure the ECN is implement.
• To lead and provide support to customer audit and participate in new projects: PPAP submission to understand meet customer quality requirements.
• Access and manage all customer web quality reporting and co-ordinate with internal team on new updated documents.

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract.
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works.
• Liaise with Contractor to rectify any non-conformances and document them properly.
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety.
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site.
• Supervise installation of instrumentation and monitoring of instrumentation.
• Lead a team of supervisors to ensure full time supervision of works on site.
• Any other ad-hoc tasks assigned by supervisor / client.

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

[Job ID: 1487961]

Responsibilities:

• Integrate and test incremental software releases for systems/subsystems in line with project schedules
• Set up and support environments for integration, testing, validation, and acceptance activities
• Define and execute testing across platforms (regression, interface, simulation, tools)
• Analyze and resolve system/subsystem issues, ensuring proper logging and early identification
• Collaborate with cross-functional teams to ensure alignment with design and specifications
• Prepare technical documentation and ensure compliance with quality and configuration standards
• Develop scripts to automate system administration tasks
• Implement and manage performance testing tools (load, response time, etc.)
• Provide technical guidance to junior integrators and V&V teams
• Support project leads with performance improvements, risk identification, and mitigation actions
• Engage with customers and support integration training when required
• Maintain and improve processes, ensuring knowledge sharing and reusability across projects

Requirements:

• At least 5 years of experience in integration of complex software-centric real-time systems, ideally Air Traffic Management systems
• 3 years of troubleshooting virtualization platforms/operating systems: 
• Linux/Unix Operating Systems, SNMP Services, RSYSLOG
• Windows Operating systems
• VMWare
• 3 years of experience in scripting: Python, Shell, XML
• Experience in DevOps and Automation Tools such as Ansible, Jenkins
• Configuration management experience using GIT (Bitbucket) or JIRA
• Good knowledge in Cybersecurity such as LDAP, AD, PKI
• Good knowledge in Network Protocols and technologies: SNMP, UDP, TCP, IP
• Able to use Debugging tools (e.g. Wireshark) and Infrastructure monitoring tools

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771

EA Personnel Reg. No.: R2094050

EA Personnel Name: Ayumu Matsuki

Job Description:

• Manage and grow sales within existing customer accounts.
• Build and maintain strong relationships with both new and existing customers.
• Respond to customer inquiries and deliver effective presentations to prospective clients.
• Drive the sales and marketing efforts for products under assigned Business Units.

Job Requirements:

• Diploma or Degree in Engineering, preferably in Mechanical, Electrical, or Materials Engineering.
• Strong understanding of semiconductor processes is essential.
• Prior experience in equipment sales will be an added advantage.
• Proficiency in both spoken and written English and Chinese is required, in order to liaise effectively with English-, Chinese-, and multi-lingual-speaking associates.
• Relevant experience in sales or marketing is advantageous; strong presentation and communication skills are highly desirable.

Plan and Implement Projects

Resident Engineers are involved in the design, specifications, and execution of various projects. They use their expertise to evaluate construction projects and determine the best engineering method or practice to accomplish the job. They will establish an estimated cost and what tools and technologies are appropriate for the job as well as a timeframe for the work to be completed.

Supervise Projects

Supervising construction staff is another of the Resident Engineer’s duties. They must ensure staff are properly trained in the use of all equipment, that all staff have access to and use any safety gear and that the team is reaching the required milestones. If construction crews encounter any technical issues, the Resident Engineer should evaluate the issue and provide the appropriate solutions.

Oversee Compliance

Resident Engineers must make sure their projects adhere to all government and industry standards and guidelines. If special permits or records need to be obtained, the Resident Engineer will do so and ensure the paperwork is recorded and stored properly

• Good Degree in Civil & Structural Engineering from a University accredited by the Professional Engineers Board, Singapore
• Must be accredited as a Resident Engineer with IES/ACES
• Strong knowledge of civil and structural details, working drawings and local construction practices
• Conversant with local building codes and regulations
• Good supervisory and leadership skills

Additional requirement:

1. Supervision for structural, architectural & M&E scope of works

2. Have at least 10 years experience in site supervision as RE

3. Have track record with similar scale A&A works (5 storey building)

4. Familiar with A&A works at deep basement