Total 1,017 purchasing engineer job vacancies in Others category in Singapore

Be Part of Our Success

·       System Engineering Duties : Elicit, analyze, and managesystem-level requirements. Define system architecture and allocate requirementsto hardware, software, and FPGA subsystems. Develop system verification plansand traceability matrices. Conduct trade-off studies (performance, power, cost,schedule) for FPGA vs. other processing solutions (DSP, GPU, MCU). Lead designreviews and interface with customers on technical specifications.

·       FPGA Design Duties : Architect, code (VHDL/Verilog), simulate, andimplement FPGA designs on Xilinx or Intel platforms. Perform synthesis,place-and-route, timing closure, and power analysis. Develop testbenches andverification environments (including self-checking and coverage-drivenverification). Integrate IP cores (third-party or legacy) and design custominterfaces (PCIe, JESD204B, Ethernet, ADC/DAC controllers). Debug FPGA-relatedsystem issues using logic analyzers, oscilloscopes, and JTAG debuggers.

·       Integration& Validation : Support hardware-in-the-loop (HIL) testing and system-levelintegration. Work alongside software engineers to validate driver and firmwareinteractions. Generate documentation, requirements specification, designdescription, verification report, and user manual.

·       Preparecomprehensive firmware/software documentation by converting software andinterface requirements into clear and concise development specifications.

Qualities We Value

·       Bachelor/Mastersin electrical engineering, computer engineeringor systems engineering

·       Minimum 2to 3 years of combined experience in systems engineering and FPGA development.

·       Familiarwith systems engineering processes (ISO 15288 or similar)

·       Familiarwith scripting (Python, Tcl, or Bash) for automation

·       Understandingof verification & validation (V&V) methodologies

·       Understandingof digital signal processing (DSP) fundamentals is a plus

·       Experiencewith both system thinking and deep FPGA expertise

·       Experiencewith requirements management tools

·       Hands-onexperience with Xilinx Vivado / Vitis or Intel Quartus

·       Exposure tosafety/security standards (DO-254, IEC 61508, or similar) is advantageous

·       Proficientin VHDL (preferred) or Verilog

·       Workingknowledge of simulation tools (ModelSim, Questa, or Xcelium)

·       Stronganalytical and problem-solving mindset.

·       Excellentcommunication skills to bridge technical teams and customers.

·       Ability towork independently and lead small technical work packages

·       Workinglocation is in Ang Mo Kio

·       Singaporeansonly

Please send your resume to john@oaktree.com.sg with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Duties & Responsibilities

· Review Contract Docuements

· Make MTO, BOQ

· Study drawings, specifications

· Interface with Client and Make a Progress Claim

· Manage site activities, site workers, subcontractors, main contractors

· Experience for brand submission and technical discussion with authority, design consultant

· Deep knowledge in scheduling, planning, resource control and installation

· Capability in controlling of changes, variations and their costs.

· Monitor and review information from materials, events, or the environment, to detect or assess problems.

· Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.

· Identify problems and reviewing related information to develop and evaluate options and implement solutions.

· Using logic and reasoning to identify the strengths & weaknesses of alternative solutions, conclusions or approaches to problems

Requirements

· Candidate must possess at least Diploma/Degree in Engineering (Mechanical) or equivalent.

· At least 2 Year(s) of working experience in the related field is required for this position.

· Required Skill(s): Accountability, Take ownership of task, Strong mindset, Communication skill

Duties & Responsibilities

· Review Contract Docuements

· Make MTO, BOQ

· Study drawings, specifications

· Interface with Client and Make a Progress Claim

· Manage site activities, site workers, subcontractors, main contractors

· (For Electrical Engineer) Knowledge in Power Distribution System, Lighting System, Earth & Lightening System, PV System, UPS/EPS, Telephone distribution.

· Experience for brand submission and technical discussion with authority, design consultant

· Deep knowledge in scheduling, planning, resource control and installation

· Capability in controlling of changes, variations and their costs.

· Monitor and review information from materials, events, or the environment, to detect or assess problems.

· Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.

· Identify problems and reviewing related information to develop and evaluate options and implement solutions.

· Using logic and reasoning to identify the strengths & weaknesses of alternative solutions, conclusions or approaches to problems

Requirements

· Candidate must possess at least Diploma/Degree in Engineering (Mechanical, Electrical, Electronic) or equivalent.

· At least 5 Year(s) of working experience in the related field is required for this position.

· Required Skill(s): Accountability, Take ownership of task, Strong mindset, Communication skill

Our client is a Manufacturing MNC, one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a LSR Engineer to be part of their Engineering team for ongoing transformation projects. They are located in the North – easily accessible.

Duties of LSR Engineer

• Serve as the technical authority for Liquid Silicone Rubber (LSR) molding across the full medical device product lifecycle, from concept development through commercialization, sustaining engineering, and product retirement.
• Provide technical leadership in LSR process development, tooling, material selection, and manufacturing to ensure product quality, regulatory compliance, and cost-effective production.
• Partner with R&D, Quality, Regulatory Affairs, Operations, and Supply Chain teams to support new product development, process transfer, and continuous improvement initiatives.
• Drive Design for Manufacturability (DFM) and Design for Reliability principles, providing expertise in component design, tooling strategies, material selection, and biocompatibility considerations.
• Lead process development and validation activities, including DOE, PFMEA, process capability studies, and IQ/OQ/PQ validation, utilizing scientific molding principles.
• Ensure compliance with ISO 13485, FDA Quality System requirements, ISO 14971 risk management standards, and other applicable medical device regulations.
• Support audits, regulatory inspections, CAPA investigations, root cause analysis, and post-market manufacturing performance activities.
• Review and approve engineering changes, ensuring appropriate risk assessments, validation requirements, and regulatory considerations are addressed.
• Provide technical oversight to suppliers, contract manufacturers, toolmakers, and material vendors, including qualification, audits, technology transfers, and performance improvement initiatives.
• Evaluate and implement advanced LSR technologies, automation solutions, and process innovations to support business growth and operational excellence.
• Act as the Subject Matter Expert (SME) for LSR molding, providing mentorship, technical guidance, and recommendations to cross-functional teams and senior leadership.

Requirements

• Degree / Master in Engineering field
• Min 10 years of experience in LSR molding
• Experience in medical device manufacturing and regulations (ISO 13485, FDA)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

NCS is a leading AI Tech Services company. With a 15,000-strong team across the Asia Pacific, NCS scales its platforms and capabilities to provide clients with greater agility and AI expertise across a range of Industries. Embracing a strong ecosystem of global partners, NCS transforms technology services delivery combining AI with digital resilience to drive real business impact. NCS is a subsidiary of the Singtel Group.

As a Cloud DevSecOps Engineer, your responsibilities will lie within the development and management of key components of the cloud infrastructure supporting our services, ensuring and improving availability and reliability of the infrastructure. You will be working within a DevSecOps driven team, which manages the customer cloud environment encompassing hundreds of servers and multiple implementations of cloud services in the form of SaaS, PaaS and IaaS, by supporting the team and infrastructure with strong up-to-date technical and hands-on knowledge of cloud technologies and configuration of the cloud environment. You will be expected to maintain up-to-date knowledge of technology standards, industry trends, emerging technologies, and software development best practices.

What you will do?

• Setup, testing, implementation and maintenance of technologies on cloud environments (AWS/Azure)
• Setup, testing and integration of CI/CD tools
• Architecting and development of solutions to meet project requirements
• Working in an agile, cross-functional team, actively engaging to support the success of the team
• Solving complex technical problems individually and as a team
• Review and improve work processes based on best practices in industry, specific to service support operations for client IT Cloud infrastructure
• Documentation of new processes
• Maintain up-to-date knowledge of technology standards, industry trends, emerging technologies, and software development best practices
• Demonstrate hands-on knowledge of DevSecOps to Infrastructure as Code (IaC) development and deployment in project deliveries
• Operate, manage and support the IT infrastructure and services implemented to meet prescribed service levels by the client
• Review and improve work processes based on best practices in industry, specific to service support operations for client IT Cloud infrastructure
• Ensure that project implementation and operations are aligned to client technology standards and policies
• Provide AWS maintenance support for production system (eg. monitoring, tuning, patches updates/upgrades)
• Reduction of time required for production through skills in AWS Cloud Formation technique to deploy automation infrastructure
• Knowledge of AMI, ASG development and maintenance
• Improvement of resources and working on resource tagging for designating costs and comprehensive planning for budgeting, reporting, and governance.

An ideal candidate possesses:

• Diploma / Degree in Computer Science, Computer or Software Engineering or Information Technology or related disciplines
• Minimum 1 to 3 years of relevant IT experience
• Possess current hands-on working experience with technologies involving CI/CD development (scripting such as Python, Ansible), Infrastructure automation using IaC such as Terraform, CloudFormation, cloud services on AWS to drive DevSecOps.
• Experience in setting up, utilisation and optimisation of CI/CD pipelines, scripting and automated testing
• Experience in coding or scripting languages such as Bash, Powershell, Perl, Python, etc.
• Experience in setup and configuration of OS and services via scripting will be an added advantage
• Knowledge of cloud concepts, services, technologies and architecting
• Experience in utilisation, management and integration of software development and collaboration tools such as Git, Maven, Gradle and Bamboo, Jenkins
• Excellent problem-solving and analytical skills
• Able to communicate (written and spoken) with clarity and effectively to customer and be able to position to stakeholders as a trusted team member
• Possess an approachable attitude towards team members
• Adaptable towards changes
• Be a good cordial team player with an ability to work in a cross-functional setting besides being an individual contributor

Good to have:

• Experience in building cloud native applications eg. using Python, Node.js
• In-depth knowledge of networking on the cloud
• Technical qualifications related to Cloud (AWS/Azure)

We are driven by our AEIOU beliefs—Adventure, Excellence, Integrity, Ownership, and Unity—and we seek individuals who embody these values in both their professional and personal lives. We are committed to our Impact: Valuing our clients, Growing our people, and Creating our future.

Together, we make the extraordinary happen.

Learn more about us at ncs.co and visit our LinkedIn career site.

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

You are responsible for new equipment introduction, risk assessment, equipment set-up, release, PM, Calibration, lab audits and as well as continuous improvement activities such as equipment reliability improvement, cost reduction, and equipment usage optimization. Through this role, you will enhance your technical skills in equipment management and improvement, project management, and strengthen your engagement and network with vendors and global GEL organizations across Micron sites.

Responsibilities

-Support GEL Equipment and lab operations including Internal and External audits, ESD and PM, Calibration, equipment troubleshooting, Safety and Chemical controls.

- Oversees the installation, modification, upgrade and maintenance of Engineering equipment.

- Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. - -- Establishes programs and solutions for increasing uptime and for equipment problems that affect the engineering process.

-Provides technical support to the engineering equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

- Collaborate with cross functional teams on equipment requirements, space planning, facilitation, purchase and installation of equipment.
- Equipment inventory controls and critical spare parts planning.

- Coordinate external vendors on training, repair, and preventive maintenance of equipment.
- Manage external vendors expectation, set and assess goals and achievements.
- Analyze and support stakeholders’ requirements and expectations.
- Foster closer collaboration amongst cross functional teams.
- Focus on customer needs and provide timely solutions.

Requirement

• Bachelor's degree in engineering with experience with ESD checks

• At least 1 year of experience in Semiconductor Equipment or Tools PM, calibration, and troubleshooting.

• Knowledge with Automated Optical Inspection and ANSYS Simulation

• Manage, design, develop, and maintain construction projects from conception through completion
• Conduct on-site investigations and analyze data including maps, reports, tests, drawings, photographs, and surveys
• Prepare detailed blueprints and designs using computer-aided design (CAD) software such as AutoCAD and Civil 3D
• Carry out technical and feasibility studies to assess project viability and structural integrity
• Assess potential risks, materials, and costs, and prepare accurate budget estimates
• Ensure projects comply with legal requirements, health and safety standards, and zoning regulations
• Liaise with architects, subcontractors, consultants, clients, and government officials throughout project lifecycle
• Monitor project progress and compile regular status reports
• Oversee and mentor staff while managing project resources and timelines
• Prepare and submit permit applications and technical documentation
• Develop comprehensive plans for repairs, maintenance, and replacement of existing infrastructure
• Perform quantity calculations and adjust designs for practical and budgetary purposes
• Inspect project sites to ensure compliance with codes and proper construction progress

Job Scope:

• Carryout preventive and corrective maintenance of ACMV systems, including air-conditioning units, FCUs, AHUs, CRAC, ventilation systems, exhaust systems, and associated equipment.
• Perform installation, replacement, upgrading, and commissioning of ACMV equipment and systems.
• Conduct troubleshooting and fault diagnosis of ACMV systems and implement effective corrective actions.
• Inspect equipment regularly to identify defects, deterioration, and operational issues.
• Assess system performance and recommend necessary repairs, replacements, orimprovement works to enhance reliability and efficiency.
• Ensure all ACMV systems operate in compliance with applicable safety regulations, codes of practice, and company standards.
• Prepare maintenance reports, service records, inspection checklists, and other technical documentation related to work performed.
• Coordinate and schedule maintenance, repair, and installation activities to ensure the timely completion of work.
• Liaise with clients, subcontractors, suppliers, and relevant stakeholders regarding maintenance and project requirements.
• Assist in the sourcing, evaluation, procurement, and inventory management of spare parts, tools, materials, and ACMV equipment.
• Monitor stock levels and recommend replenishment of critical spare parts and consumables.
• Participate in tender site visits and site surveys to assess project requirements and provide technical input for tender submissions.
• Support the preparation of quotations, technical proposals, and maintenance plans where required.
• Supervise, mentor, and provide technical training and guidance to junior technicians and apprentices.
• Ensure proper implementation of safe work procedures, risk assessments, and permit-to-work requirements.
• Attend emergency breakdowns and provide after-hours support when required.
• Maintain good housekeeping of work areas, tools, and equipment.
• Perform any other ACMV-related duties as assigned by the superior.

Job Requirements:

• At least 5 experience in ACMV installation, maintenance and repair.
• Education: ITE/ Diploma or equivalent in ACMV/ Electrical or related discipline.

Job Scope:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer, and contractors
• Prepare technical engineering reports as and when required by authorities or client

Requirements:

• Minimum 2 years of experience as Design Engineer in building construction
• Willing to and with enthusiasm to learn in the field of civil & structural engineering design
• Knowledge with Revit Structure is an added advantage

Job Description

• Must be able to understand Technical Drawing
• Preparation of technical specifications and tender documentation.
• Monitoring and ensuring that the work progress is within the schedules.
• Able to do submission of BIM
• Shop-drawings submission for Consultants’ approval
• Attend Project Technical meetings
• Appy and preparation of submission for authority testing & commissioning of project equipment

Requirement

• Administrate contractual requirement of all projects including payment terms and variation orders.

· Provide technical assistance and problem solving in projects.

· Plan, organise and assign project engineers and fabrication team to each specific project.

· Good working attitude, responsible, self-motivated and goal-oriented, a strong desire to deliver results.

Any adhoc projects assigned by General Manager

This role is integral to a pioneering research project focused on advancing geotechnical

investigation and monitoring techniques in the geotechnical engineering sector. The position

requires a combination of lab-based and field-based research.

Job Summary

We are seeking a highly motivated Research Engineer to join our team in developing and

validating a digitalise system for advanced geotechnical engineering solution. The role is

research-based and requires regular time spent both in the office/lab for data analysis and in

the site for field trials and system calibration.

Key Responsibilities

• Research &Development: Conduct detailed literature reviews and identify technical gaps.
• Field Execution& Data Acquisition: Plan and execute field trials on selected sites.
• Data Analysis& Correlation: Develop and validate robust correlation models.
• Digital Platform Collaboration: Collaborate with the software team on the development and testing of a server-based online monitoring platform.
• Documentation: Prepare technical reports, progress updates, and develop detailed Standard Operating Procedures (SOPs) and user guide manuals.

Requirements

• A degree in Civil Engineering is required; fresh graduates are welcome to apply.
• Experience: A strong interest in geotechnical engineering, site investigation, and digital monitoring technologies.
• Skills: Proficiency in data processing, statistical analysis, and technical report writing.
• Work Environment: Must be willing and able to work in both site (fieldwork for trials, calibration, and data collection) and office settings (analysis, reporting, and platform development collaboration).

You may send your resume / CV to email address directly: hr@geonamics.com.sg

Position Summary

The Electrical Simulation Engineer is responsible for product package electrical simulation. 

Candidates with semiconductor packaging experience are encouraged to apply for this position. 

Responsibilities 

• Conduct simulation on SiPi and High speed digital area in component & system level 

• Conduct simulation on RF, EMI, EMC, in component & system level 

• Provide comments and recommendation to product design and process optimization 

• Provide electrical input to mechanical simulation for thermal and stress analysis. 

• Prepare the simulation reports with data analysis and recommendation. 

• Other ad-hoc activities assigned by the reporting manager. 
  

Requirements

• Minimum Master's Degree in electrical engineering or similar discipline.
• Prior experience in electrical simulation within semiconductor industry is preferable.
• Experience in handling internal and customer projects.

• Hands-on skills on EDA tools:

1. ANSYS: Siwave, Q3D, HFSS, Circuit, etc.
2. Cadense: PowerSi, PowerDC, ExtractIM, Clarity, etc.
3. Keysight: ADS, etc.

Reporting to the Project Manager

Overseeing the construction activities, planning, implementation, and monitoring work schedules in accordance to the master and detailed work program.

Liaise with consultants for technical issues and coordinate with subcontractors on the site activities.

Managing interfaces with other contractors working on the project.

Prepare project progressive report to the Project Manager/Project Director.

Prepare report and method statement.

Monitor ongoing construction activities.

We are looking for a motivated and experienced Pile Test Engineer to join our growing team in the construction industry.

Job Responsibilities:

• Conduct and supervise pile load tests (static / dynamic).
• Prepare method statements, test reports, and documentation.
• Coordinate with consultants, clients, and site teams.
• Ensure testing works comply with project specifications and safety standards.
• Analyze test results and provide technical recommendations.

Requirements:

• Degree / Diploma in Civil Engineering or related field.

• Relevant experience in pile testing works preferred.

• Familiar with MOM / site safety requirements.

• Good communication and reporting skills.

• Able to work independently and on-site.

What We Offer:

• Competitive salary (based on experience)
• Career growth opportunities
• Supportive working environment

You may send your resume / CV to email address directly: hr@geonamics.com.sg