Total 1,164 network engineer job vacancies in Others category in Singapore

Job Description & Requirements

To perform troubleshooting, repair and maintenance of cranes and transport equipment with respect to its mechanical function and hydraulic control system. In addition, to maintain proper recording of each task undertook, inclusive of the remedy action performed.

REQUIREMENTS OF THE POSITION

Minimum Qualifications

a) Minimum GCE ‘O’ Level holder or equivalent with 2 – 3 years of working experience in mechanical repair of cranes or related equipment.

b) NTC holder of Mechanical Engineering discipline with 1 – 2 years of related working experience will be preferred.

Other Requirements

a) Good working track record with exposure to mechanical and

hydraulic control system. Advantageous for those with experience on engine repair/maintenance.

b) Is analytical and has a strong drive for results.

c) Pleasant personality and able to communicate effectively.

d) Team player & self-motivated.

e) A desire to work in a dynamic and challenging environment and build a career with a leading service provider for cranes and transport equipment.

f) Willing to travel overseas on job assignment

RESPONSIBILITIES

• Immediate response to equipment breakdown request, as instructed by supervisor.

• Troubleshooting and analysis of faults or problem encountered by cranes or transport equipment, thereafter to mete out corrective action to recover equipment immediately.

• Perform periodic maintenance and checks on cranes or transport equipment, as planned or scheduled.

• Repair and reconditioning of mechanical or hydraulic parts.

• Complete job record form for each activity undertook and promptly returns the form to supervisor.

• To work under the guidance and supervision of Mechanical Foreman, Service Supervisor or Coordinator. Therefore, if in doubts, always seek for supervisor instruction.

• Keeps immediate supervisor well-informed of any activities, results of efforts and problems identified/potential problems; recommends corrective actions to immediate supervisor.

Job Scope

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· May be involved in pre-drawing submission stage for understanding of design concept.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Resolve all site problems encountered during the constructions stage.

· Monitor work in progress by highlighting on shop drawings.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Conduct spot or routine site visit to check subcontractor’s workmanship and speed.

· Conduct quality and accuracy performance check on work done by following the checklist.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Requirements

· At least a Diploma in Civil Engineering or relevant field of study or equivalent work experience

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Able to start work within a short notice period or immediately preferred.

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

• Coordinate with the Construction Manager and Planning Manager to review and plan the sequence for traffic diversions and drainage diversions, considering the construction methodology and site constraints
• Demonstrate strong knowledge of PUB Code of Practice and LTA standard specifications including but not limited to SDRE, CDC, and M&W specification for roadworks. Familiarity with Traffic Impact Assessment (TIA) tools such as SIDRA and VISSIM is preferred
• Prepare and develop Temporary Traffic Control Safety Submission (TTCSS) as well as temporary drainage schemes, for submission and clearance with LTA PJT prior to detailed submissions to LTA and PUB
• Liaise with Traffic Consultants for the preparation of drawings and supporting documents, including TIA reports, for submission to LTA, PUB, and other relevant authorities
• Coordinate with various LTA divisions to obtain approval for Traffic Control Plans (TCP), Traffic Impact Assessment (TIA), including managing IR and PSRD processes until full endorsement is obtained prior to implementation
• Engage and coordinate with subcontractors, LTA divisions, and term contractors. To also prepare materials for stakeholder engagement and secure necessary LTA management clearances
• Ensure all site works are executed in accordance with approved designs and incompliance with LTA and PUB standards. Conduct post-implementation inspections with Traffic Consultants and perform regular site monitoring to ensure safety for all road users, including pedestrians
• Coordinate with consultants on submissions for Final Drainage Scheme (FDS) and Detailed Drainage Submission (DDSS) for final reinstatement works until permanent stage approvals are secured
• Manage submission of Permanent Drainage Schemes to PUB and obtain Development Plan (DP) clearance
• Collaborate with internal departments to review constructability of approved traffic and drainage designs, providing technical support and solutions for site constraints including installation of specialists’ systems on both At-Grade and viaduct
• Support LTA CPN/SPRO teams in addressing public feedback related to traffic conditions and assist in timely resolution of issues

Job Requirements

• Bachelor’s degree in Civil engineering or equivalent
• Minimum of 3 years relevant experiences related to Traffic Engineering jobs
• Experience in LTA projects traffic management & traffic diversion works
• Technical expertise and knowledge in traffic/road diversion jobs
• Adept with the different stages of traffic diversion works
• Proficient in Microsoft Office and can use Auto CAD
• CSCPM/BCSS
• Good interpersonal skills
• Hardworking and willing to learn

Marine Elevator Engineer responsibilities are to carry out inspection, installation, maintenance & repair/overhaul Marine Elevator Systems.

Reads & understand Electrical & Technical Drawings.

To perform hands-on fault diagnosis & troubleshoot for Electrical & Mechanical defects.

To be able to work independently to execute Marine elevator general repair and overhaul jobs on board/ at site.

Knowledge of Marine Elevator electrical wiring and mechanical works.

Requirements:

Possess Degree Certificate in Elevator/ Electrical/ Mechanical Engineering.

Able to travel overseas at short notices depend of project.

Willing to work in shipyard / anchorage environment.

Able to work overtime as need arises.

Able to work overtime, odd hours, weekend and public holidays.

Job Responsbilities:

● To own, maintain and improve the following indices: Quality, Uptime and Cost.

● Sustain equipment KPI and make continuous improvements to enhance the performance.

● Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.

● Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.

● Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.

● Manage the expenditure allocated for equipment maintenance without compromising on quality output.

● Continuous improvement of equipment KPI in terms of quality, uptime and costs.

● Plan and implement an effective Preventive Maintenance program on equipment.

● Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.

● Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.

● Participate in CIP programs to optimize equipment utilization and cost of maintenance.

● Become the technical Expert for the respective machine specialization.

● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.

● Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.

● Able to create CAMSTAR/PROMIS (MES) DC OP and SPC charts.

● Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.

● Wafer scrap reduction awareness and mindset.

● Self-audit and update specifications to meet TS16949 Quality Standard requirements.

Job Requirement:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 2 years of relevant work experience in Metal Etch, AMAT DPSM, ASHER, DSTI Equipment in the semiconductor industry.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Responsibilities

• Apply statistical tools (SPC, DOE, FDC, ECMS) t optimize equipment performance and robustness.
• Establish and optimize Preventive Maintenance (PM) plans to improve equipment quality, cost, and productivity.
• Work with vendors to resolve equipment issues and improve performance.
• Collaborate with Process and Manufacturing Engineers to address yield, WAT, and operational issues.
• Manage spare parts and consumables inventory to support maintenance based on production forecasts.
• Lead new equipment start-up from facility hookup to production acceptance.
• Drive continuous improvement projects to enhance equipment efficiency, reliability, and cost reduction.
• Set targets to minimize wafer scrap, reduce equipment cost per wafer, and optimize utilization.
• Provide training and guidance to AEs and TAs on troubleshooting, equipment knowledge, and risk assessment.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for issue resolution.
• Develop long-term solutions for recurring hardware and operational issues.
• Create and maintain implant operation SOPs and work instructions.

Job Requirement:

• Degree in Electrical / Electronics / Mechanical /Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 3 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500,VIISTA900, VIISTA HCP, GSD, Axcelis HE/VHE. AMAT XR80.
• Strong logical thinking capability and good analytical skill
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Purpose

The purpose of this role is to plan and oversee shift wise production, utilize available machineries and manpower for better productivity and fulfillment and adhere to standards

Primary Responsibility

Area: Production Management

Key activities

"Organize production setup as per production schedule, assign task to associates, follow standard procedures, methods, BPS & work instructions, adapt & steer primary production activities to fulfil SQCD targets of the shift.

Track production performance and efficiency KPI (OEE, FPY, scrap, tool life, levelling, fulfilment, etc.), identify and record deviations"

Key Result Areas / Indicators

Shift-wise SQCD

Area: Daily shop Management

Key activities

Conduct & document checks, Quality audit, eLPC to ensure conformance to safety, quality & shop-floor standards. Record shift events (attendance, breakdowns, quality issues, criticality, performance, etc). Summarize shift events & performance and handover to next shift FLM to ensure seamless production continuity

Key Result Areas / Indicators              

No deviations to set standards

Area: People Management

Key activities

 Coaching & Skill development Supervise and develop competent workforce of the manufacturing unit to improve efficiency. Organize and train new associates for the production lines. Track & monitor skill levels of existing associates. Organize, train and coach them to understand the requirements and reasons behind various processes, procedures & controls planned to ensure safety, efficiency and defect free production                            

Key Result Areas / Indicators

Productivity, Skill management

Area: Cross functional collaboration

Key activities

Participate and organize between internal departments of the manufacturing unit for on-time delivery.

Key Result Areas / Indicators                            

Program fulfillment

Area: Inventory Management

Key activities

Plan and control WIP for efficient value stream management.

Key Result Areas / Indicators              

Plant production cost

Area: Bosch Production System

Key activities

Promote and implement BPS concepts.

Key Result Areas / Indicators

BPS maturity

Area: Continuous improvement and change initiatives

Key activities

Motivate and coach associates into active engagement of learning, problem-solving & identifying potentials in manufacturing for Kaizens, suggestions on SQCD to enable operational excellence.

Key Result Areas / Indicators

Idea Per associate

Area: Digitalization

Key activities

Contribute for implementing innovative digitalization solutions in the value stream   

Key Result Areas / Indicators

I4.0 - paperless manufacturing

Area: Employee & industrial relation

Key activities

Engage proactively with associates to sustain an open forum for them to voice their concerns, grievances, etc. Clarify, advice, counsel, resolve or raise topics to superiors in a fair &transparent manner to safe guard interests of associates & management and build a progressive work environment.   

Key Result Areas / Indicators

Lawful conduct, no disruption in production.

Responsibilities:

• To assist in preparation of BIM model and content for BIM coordination meetings
• Adhere to BIM execution plan and project workflow criteria under the direction of Architect in-charge
• Support project team and efficiency in workflow to achieve BIM deliverables as per requirements timely
• Leveraging BIM software and tools as a methodology to coordinate design documentation
• Assist in updating BIM standard and template for project
• Familiar with BIM submission, regulations and guidelines

Requirements:

• Specialist Diploma in BIM/VDC preferred
• Minimum 2 years relevant working experience in building contruction (Architecture), Singapore
• Knowledge of authorities' requirements and overall project process
• 5 days work week, Mondays to Fridays
• Location: Bugis, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Our client, a well-established non-profitable organisation is seeking for a Risk Management Head - $ 8,500.00 + AWS + VB / CentralWest Area

Requirements

• Degree in Risk Management or relevant
• At least 6 to 8 years experience developing policies and processes based on ORM framework to integrate operational risk activities within the organisation.
• Candidates from Social Service, Healthcare or Education industry are preferred.
• Familiar with ERM, ORM and BCM framework
• Meticulous, Independent, confident

Others

• Salary up to $ 8,500.00 + AWS + VB
• CentralWest Area
• Walking distance from MRT station

Interested candidate can send in your resume (word format prefer) to grayson.su@thetalentnetwork.com.sg

Our client, a well-established non-profitable organisation is seeking for a Risk Management Head - $ 8,500.00 + AWS + VB / CentralWest Area

Requirements

• Degree in Risk Management or relevant
• At least 6 to 8 years experience developing policies and processes based on ORM framework to integrate operational risk activities within the organisation.
• Candidates from Social Service, Healthcare or Education industry are preferred.
• Familiar with ERM, ORM and BCM framework
• Meticulous, Independent, confident

Others

• Salary up to $ 8,500.00 + AWS + VB
• CentralWest Area
• Walking distance from MRT station

Interested candidate can send in your resume (word format prefer) to grayson.su@thetalentnetwork.com.sg

Responsibilities

• Projects ranging from commercial, industrial, institutional, mixed-development, residential, healthcare, infrastructure, MRT etc
• Work on and actively contribute to the design and development of architectural projects with opportunity to carry through the project through various phases of the project cycle (from concept design, schematic design, design development, construction)
• Coordinate with consultants from various disciplines and clients/stakeholders, and find creative and workable solutions for the project together with the project team
• Be a part of a team for design competitions or design, design presentation packages, design development package and tendering
• Attend and participate in meetings, technical discussions and coordination with contractors/consultants
• Follow-up on project and construction activities as well as to carry out contract administration responsibilities

Requirements

• Architectural degree/masters recognised by Board of Architects Singapore
• Min 2-7 years post graduate professional experience
• Competency in BIM/Revit, Archicad, Autocad, Sketch-up, In-Design as well as basic rendering, graphics publishing software program

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459 (https://gemsrecruit.com/)

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Possess knowledge of environmental design, and green building rating tools [LEED, Green Mark, WELL, Smart Score, True Waste, LEAF, ILFI, etc.].
• Conversant with environmental simulations such as energy modelling, daylight analysis, CFD, life cycle carbon analysis.
• Lead projects independently and deliver technical solutions to design and client team.
• Lead pro-active coordination with internal and external disciplines to achieve a high-quality consistent set of presentation and design documents.
• Proactively check and coordinate project documents (including but not limited to multi-disciplinary drawings, design reports, technical specifications, etc.).
• Conversant with project’s contractual requirements and deliver high quality deliverables in established schedule.
• Familiarity with local sustainability regulations and codes.
• Able and motivated to update skills and expertise through continuing professional development (CPD) initiatives.

Qualifications

• Bachelor’s or higher degree in a field related to building engineering, sustainability, architecture
• Minimum five-years’ experience within sustainability consulting or building engineering.
• Possess minimum two green building accreditations, such as Green Mark AP [required], LEED AP [required], WELL AP [desired], TRUE Advisor [desired], WiredScore AP [desired].
• Successful track record of delivering local and international projects in the built environment.
• Effectively multitask and work collaboratively with internal and external disciplines.
• Experience in energy modelling, daylight analysis, CFD, parametric modelling, life cycle carbon analysis, and ESG.
• Software skills in AutoCAD, Rhino, Grasshopper, IES VE, Adobe, One-Click LCA, Ansys, Star-CCM, OpenFOAM
  

Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

Overall Job Objectives
Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities
1. Study & review M&E drawings and coordinate M&E works with the consultants, sub-contractors as well as project structural & Architectural colleagues team to resolve any technical / site issues/ discrepancies

2. To carry out site supervision on M&E works and arrange inspection with RTO

3. To supervise M&E subcon works and ensure subcontractors progress in accordance to schedule set

4. Arrange all the M&E T&C Works

5. Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use

6. Highlight and advise the project staff on the interfacing of M&E services and the building works

Job Specifications
1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.