Total 1,005 failure analysis engineer job vacancies in Others category in Singapore

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

You are responsible for new equipment introduction, risk assessment, equipment set-up, release, PM, Calibration, lab audits and as well as continuous improvement activities such as equipment reliability improvement, cost reduction, and equipment usage optimization. Through this role, you will enhance your technical skills in equipment management and improvement, project management, and strengthen your engagement and network with vendors and global GEL organizations across Micron sites.

Responsibilities

-Support GEL Equipment and lab operations including Internal and External audits, ESD and PM, Calibration, equipment troubleshooting, Safety and Chemical controls.

- Oversees the installation, modification, upgrade and maintenance of Engineering equipment.

- Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. - -- Establishes programs and solutions for increasing uptime and for equipment problems that affect the engineering process.

-Provides technical support to the engineering equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

- Collaborate with cross functional teams on equipment requirements, space planning, facilitation, purchase and installation of equipment.
- Equipment inventory controls and critical spare parts planning.

- Coordinate external vendors on training, repair, and preventive maintenance of equipment.
- Manage external vendors expectation, set and assess goals and achievements.
- Analyze and support stakeholders’ requirements and expectations.
- Foster closer collaboration amongst cross functional teams.
- Focus on customer needs and provide timely solutions.

Requirement

• Bachelor's degree in engineering with experience with ESD checks

• At least 1 year of experience in Semiconductor Equipment or Tools PM, calibration, and troubleshooting.

• Knowledge with Automated Optical Inspection and ANSYS Simulation

Key Responsibilities

Quality System, ISO & Audit

• Act as Management Representative (MR) forISO 9001 certification.
• Plan, conduct, and coordinate internal quality audits and follow upcorrective and preventive actions.
• Ensure compliance with ISO standards, customer requirements, and regulatoryobligations.
• Maintain, review, and control all quality system documentation, procedures,and records.

Quality Reporting & Data Analysis (Core Focus)

• Prepare and submit weekly and monthlyquality reports to management.
• Track and analyze NCR status, customer return closure cycle time, DPPM,FA/NPI First Pass Yield, and audit findings.
• Monitor operational and quality performance data to identify trends, risks,and improvement opportunities.
• Support management reviews with accurate data and analysis.

FA / NPI & Quality Planning

• Coordinate with Sales, Engineering,and Production on FA and NPI quality requirements.
• Create and maintain Quality Control Plans, Inspection Plans, and CMMinspection programs for new products.
• Monitor FA/NPI cycle time and drive continual improvement activities.

• Participate in quality improvementprojects.

Customer & Supplier Quality Management

• Act as the primary liaison with customersand suppliers on quality-related matters.
• Manage customer feedback, Engineering Change Notices (ECN), andNon-Conformance Reports (NCR).
• Ensure timely corrective actions, closure, and regular status updates.
• Escalate scrap and major quality issues to the Quality Manager immediately.

Calibration & Measurement Control

• Manage calibration of measuringinstruments, equipment, and tools to ensure accuracy and traceability.
• Maintain calibration schedules and records and ensure timely calibration.
• Coordinate with external calibration service providers when required.

Continuous Improvement & Operational Support

• Identify quality risks and process gapsand implement corrective and preventive actions.
• Support continual improvement initiatives and business continuity planning.
• Research and review technical and quality-related data for internal andcustomer needs.
• Track work schedules to meet reporting, audit, and submission deadlines.

Qualifications & Requirements

• Higher Nitec or higher in Precision Engineering, Quality Management, or related field.
• ISO 9001 Internal Auditor certification is preferred.
• Experience acting as Management Representative (MR) is a strong advantage.
• Proven experience in quality reporting, documentation control, and auditmanagement.
• Familiar with FA, NPI, CMM inspection, and manufacturing quality systems.
• Strong analytical, reporting, and communication skills.
• Experience in precision engineering or manufacturing environment preferred.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

Job Descriptions:

• Lead NPI capacity planning and ramp-up readiness.
• Design and optimize FATP line layouts and production flow.
• Govern time studies and validate standard times across FATP lines.
• Drive line balancing optimization and manpower efficiency improvement.
• Perform OEE analysis and eliminate bottlenecks.
• Lead Lean initiatives, including VSM, SMED, Kaizen events.
• Collaborate with the automation team to optimize production line headcount and drive cost reduction initiatives.
• Quantify cost-saving opportunities and track financial impact.
• Mentor junior IE engineers.
• Present productivity analysis and improvement proposals to management

Job Requirements:

• Diploma or Bachelor Degree in Industrial Engineering or a related field; Lean / Six Sigma certification is an advantage.
• Minimum 5 years of experience in FATP or high-volume manufacturing environments.
• Strong expertise in time study, MTM, line balancing, capacity modeling, manpower optimization, OEE analysis, and throughput improvement.
• Advanced knowledge of FATP processes, with a solid understanding of automation impact on labor modeling.
• Proficient in advanced Excel, Power BI, and other data analysis tools, with the ability to prepare financial and productivity reports.
• Strong analytical, structured problem-solving, and project management skills.
• Results-driven mindset with leadership, mentoring, and cross-functional influencing capabilities.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Roles & Responsibilities

• Conduct site visits, site feasibility, solar system design, and complete execution.
• Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of commercial and utility-scale solar power systems.
• Design the arrangements of the solar panels for Rooftop, Ground-mounted, Floating, and other various supported electrical equipment and selection of cables for plant including layouts and schematic diagrams and calculation of technical sizing, BOQ/BOM.
• Perform computer simulation of solar photovoltaic (PV) generation system performance or energy production to optimize efficiency.
• Create checklists for review or inspection of completed solar installation projects.
• Analyse costs and benefits of proposed designs or projects and performing cost reduction analyses for solar systems.
• End to end execution of solar projects.
• Procurement & Vendor Coordination

Requirements

• Willing to travel and will be working in Singapore.
• Minimum a Bachelor’s Degree in Engineering, renewable energy or relevant field
• Minimum two (2) years of relevant work experience
• Experience and knowledge of reviewing Financial Modelling is preferred
• Preferably with Energy Industry or Renewable Products background
• Preferably to have a good track record of solar PV projects
• Assertive to achieve the KPIs and adaptable both as individual and team player
• Technical advisors, EPC contractors, BD related roles are welcome to apply
• Proficiency in MS Office, autocad and PVsyst

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 

Micron’s Singapore Process Development (PD) group in Technology Development (TD) is looking for Plasma-CVD / Diffusion PD engineer to support Plasma-CVD/DIFF process development of advanced technology nodes. You will design and optimize Plasma-CVD or Diffusion for Micron’s innovative NAND Flash products.

As a PD Engineer, you will take ideas from conception through process development then implementation in our manufacturing facilities. In addition to your technical responsibilities, you will also run the projects of highly technical nature. This role is essential to the success of Micron’s products and may require business-related travel. Primary areas of responsibility include Plasma-CVD or Thermal Diffusion process and film characterization, optimization, design, troubleshooting, process transfer and fundamental research.

Advanced Thin Films PD Engineer will interact with groups such as Process Integration, Metrology, Surface characterization labs, Electrical Failure Analysis, Yield Enhancement, Manufacturing and Equipment vendors/suppliers, to ensure robust thin film processes that meet the precise physical and electrical requirements for Micron Products.

As an Advanced Thin Films PD Engineer at Micron, you will be required to travel for brief business purposes. This position requires that you have an aptitude for a research and development (R&D) environment, good organizational skills and ability to work independently as well as in a team environment. This position may often require weekend support to R&D Pilot Line, for example, in case of pilot/manufacturing line excursions/downs and monitoring program-critical lots thought various modules as deemed necessary.

Your responsibilities will include, but are not limited to:

• Process Development

• Design and develop and deliver process package to meet product specification requirements as per program targets and timelines

• Characterize the processes using appropriate techniques (SEM, TEM, XPS, SIMS, AFM, etc.)

• Design and execute experiments, analyze data and present it in the appropriate forums.

• R&D Pilot Line in the Fab

• Improve process maturity, capability and sustain processes in the fab under your ownership

• Updating the Fab engineers on customer issues and technology needs.

• Supporting root cause defect and unique fail mode analysis.

• Process Integration

• Delivering advanced technology to meet future product nodes.

• Developing recipes to meet structural & electrical requirements.

• Managing wafers though Thin Film levels in support of special requirements.

• Other Process Areas

• Working in cross-functional teams to jointly develop Array and CMOS structures.

• Supporting cross-functional failure analysis and yield improvement.

• Advanced Thin Film peers

• Maintaining or developing expertise in multiple process, hardware, or technology areas.

• Serving as a resource for peers in recipe & process development.

Successful candidates must have:

• Education requirements

• PhD in Physics, Materials Science, Chemical Engineering, Electrical Engineering, Chemistry, or related fields

• BS/MS+5 years equivalent industry or research experience may substitute for a PhD.

• Understanding in one or more of the following topics Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena.

• Solid troubleshooting, experimental design and data analysis skills.

• Strong computer skills, including MS Office.

• Plasma physics background and understanding of plasma sources used in plasma CVD is highly preferred.

• Understanding of CVD and Diffusion deposition processing principles.

• Rudimentary understanding of process control and Statistical Process Control (SPC).

• An understanding of solid state devices.

• An understanding of semiconductor process.

• Knowledge of advanced data analysis techniques and scripting is highly preferred

• Open to work off shift and weekends if necessary

• Open to domestic and international travel

This role requires the successful candidate to:

• Have good understanding of Permanent Way and Railway infrastructure around it
• Plan, schedule, coordinate and carry out design of track alignment and perform supporting calculations,
• Perform concept, preliminary and detailed design as well as review the design and drawings
• Carry out and manage the design and on-time delivery.
• Help to develop the production of drawings, reports and specifications
• Liaise with clients and other stakeholders to ensure successfully delivery of the tasks/project.
• Provide technical guidance and mentorship to junior members of the team,
• Be able to use industry software and tools to drive efficiencies.  
• Provide specialized technical input to studies and design for rail projects
• Develop study and design procedures to facilitate high quality cost effective work by others.
• Participate in interdisciplinary review of project deliverables.
• Perform quality control review of design calculations or drawings.
• Prepare technical specification and reports.
• Provide input to the development of engineering budget and schedule to meet requirements.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

• Data Analysis skill to perform in-depth analysis on the testing data collected from the field to summarize the findings of the collected data
• To work closely with the engineering team to understand how the operations of various electrical equipment and systems
• Willingness to learn how to use various condition monitoring software, sensors and testing instruments.
• Participate in In-house training sessions or workshops to enhance the skills in Data Analysis
• Able to understand High Voltage Electrical Network
• Microsoft Office in expert mode to prepare test report and presentation material.
• Able to complete tasks assigned by team with minimum supervision
• Other ad-hoc duties

LEE TECH ENGINEERING PTE LTD
We are a well-established construction company. In line with our expansion plans, we invite suitably qualified individuals to fill the following position:

PROJECT ENGINEER

Responsibilities:

• Handle documentary work for tenders, progress reports, handover documents, and as-built drawings.
• Monitor project progress and compare it with the project schedule.
• Respond to customer complaints and feedback.
• Troubleshoot air-conditioning system issues.
• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Ensure compliance with applicable codes, practices, QA/QC policies, performance standards, and specifications.
• Communicate with clients to understand their needs and represent them in the field.
• Assign responsibilities and mentor the project team.
• Cooperate and communicate effectively with the project manager and other participants to provide assistance and technical support.
• Independently motivated, able to review engineering deliverables, and take corrective actions as needed.

Requirements:

• Minimum relevant certificate in Mechanical Engineering.
• At least 2-3 years of related working experience is preferred.
• Open to candidates of all experience levels.
• Proficient in MS Project and AutoCAD.
• Strong communication skills.
• Outgoing, willing to work extra hours, and possess a positive working attitude.
• Able to work independently and multi-task in a fast-paced environment.
• Candidates who can start immediately or with short notice are preferred.

Interested candidates, please email your resume to leetech@leetech.com.sg.

Other Information

- Location: Island Wide

- Salary Range : $3,000 - $4,500