Total 1,542 Engineering job vacancies in Tuas

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

The CQV Engineer is responsible to support commissioning, qualification and validation activities for GMP process equipment and utilities in a pharmaceutical / biotechnology environment. Focus on equipment such as stainless steel vessels, CIP/SIP systems, thermal systems and related process utilities. Prepare, execute, review and close CQV documentation in line with GMP, GDP and project requirements.

Key Responsibilities

• Prepare and execute CQV documents, including: Commissioning protocols, IQ / OQ / PQ protocols, Test scripts, Qualification reports, Deviation reports, Traceability matrices
• Support qualification of stainless steel vessels, including: Mixing vessels, Holding tanks, Buffer / media preparation vessels, Process tanks, Product-contact equipment
• Perform Material of Construction checks for stainless steel equipment, including verification of: MOC certificates, Surface finish, Welding documentation, Passivation records, Product-contact parts, Gasket / seal materials
  
• Support CIP and SIP qualification, including: Cycle verification, Sprayball coverage checks, Flow / pressure / temperature verification, Conductivity checks, Hold time verification, Drainability checks, Sterilisation cycle assessment
• Support thermal mapping / temperature qualification activities for GMP equipment and systems.
• Execute qualification testing and document results in accordance with approved protocols.
• Use Kneat for protocol execution, review, comment resolution and document lifecycle management.
• Support FAT / SAT, commissioning walkdowns and system handover activities.
• Review vendor documents, drawings, P&IDs, datasheets, manuals and calibration records.
• Raise and support closure of deviations, punch items, non-conformities and qualification discrepancies.
• Work with QA, Engineering, Manufacturing, Automation, Vendors and Project teams to ensure timely CQV completion.
• Ensure all qualification activities comply with GMP, GDP, data integrity and site SOP requirements.

Required Qualifications

• Degree / Diploma in Engineering, Biotechnology, Pharmaceutical Science, Life Sciences or related discipline.
• 3 to 5 years of relevant CQV experience in pharmaceutical, biotech, biologics or GMP manufacturing environment.
• Hands-on experience with CIP, SIP, thermal mapping and stainless steel process equipment.
• Experience performing Material of Construction checks for GMP equipment.
• Familiar with IQ / OQ / PQ execution and GMP documentation requirements.
• Experience using Kneat for validation document execution and review.
• Able to read and understand P&IDs, equipment drawings, datasheets and vendor technical documents.
• Good understanding of GMP, GDP, deviation management and change control.
• Strong documentation discipline and attention to detail.
• Able to work independently on site and coordinate with cross-functional teams.

Why join us?

• Generous Leave Policy.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

-Knowledge of CNC machining process

-Proficient in MasterCam/Unigraphic Cam/Autocad applications

-Experience in precision metal machining and fabrication

-Produce machined components via conventional machines/CNC machines

-Able to interpret engineering drawings, carry out related manufacturing processes

-Able to operate Multi Axis machines will be an advantage

-Able to document process summary sheet

Duties and Responsibilities

• Move inventory and materials across facilities
• Process inventory for delivery
• Sort, organize and store inventory in the proper location
• Package items and label correctly
• Delivered items and ensure quality
• Report damaged or missing inventory to supervisors
• Stack and organize large bulk items
• Remove inventory from trucks or shipping and delivery to proper location
• Update logs and documentation for inventory processing
• Move materials from facilities to workstations, pick-up locations, or other locations
• Wear safety gear at all times
• Operate heavy machinery like forklifts to move or store inventory
• Ensure workspace is free of debris and remove safety hazards from aisles
• Work as an active team member to complete team goals
• Prepare documentation and inventory for audits

Requirements and Qualifications

• Verbal and written communication skills
• Able to work in a fast-paced environment
• Familiarity with (ERP) system, and able to upload data into the company system
• Able to work independently
• Pays attention to detail and monitors the quality of inventory
• Highly organized and able to store items efficiently
• Computer literate, with excel skills/abilities

Job duties:

· Applies protective coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of steel/metal structures.

· Washes, scrapes, sands, torches, and/or smoothes interior and exterior surfaces prior to painting, varnishing, lacquering or applying other related materials.

· Cleans equipment, paint mixing area, and work area.

· Operates sandblasters, spray equipment, other small power equipment and lifting equipment.

· Applies paints, stains, surface preparatory materials, and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.

· Identification, safe handling, and appropriate disposal of paints, stains, preparatory and undercoating materials and other hazardous materials.

· mixes paints and other solutions and monitors drying to ensure desired results.

· Follows all required safety procedures.

Knowledge, Skills and Abilities:

· Knowledge of the tools, equipment, materials, and application techniques common to the painting trade.

· Knowledge and skill in hazardous materials handling, application, and disposal.

· Skill in the preparation and application of paints, stains, and surface preparation for materials

Requirements:

· Proven experience as a painter.

· Knowledge of painting material and how to select, mix and apply them.

· Aptitude in using appropriate tools.

· Good basic math skills.

· Conscientious with great attention to details.

- To assist engineers and department supervisors on purchasing for various projects and workshop tooling, hardware and miscellaneous purchases

- Follow up on the process and delivery including quality control

- Liaising with suppliers on price and delivery negotiations

- Manage deliveries to confirm compliance with projects

- Monitor stocks level and verify purchase requisition

- Assist in implementing ERP system to production floor and inventory control

- To overseas and control storage of all inventories

- ISO related matters and audits

Job Description

• Ensure that all interfaces between project and other package contractors are identified, documented and managed during all stages and phases of the project, FEED, detailed engineering, fabrication, construction and commissioning, start-up, etc.
• Provide relevant expertise of plant construction in the area of management and coordination.
• Represent the Project where appropriate to client, consulting companies and other contractors or service providers as appropriate to the needs of the work. It is necessary to proactively manage the information and responses relevant to all internal and external interfaces.
• Oversee general Interfaces associated with contract package delivery at point of interfaces, Interface schematics, Tie-ins, Project schedule impact/construction plan for interface scope, Contracting issues for interface elements, structure clashes, permits, and HSE of interfaces
• Ensure development and maintenance of an overall Interface Management Plan and Register for projects/packages covering all identified and potential interfaces, along with the relationship/references relative to the activities as per the contract.
• Support Project Manager in resolving all interfaces between Contractors, sub-contractors and clients.
• Ensures from a point of interface perspective that technical integrity and HSE requirements are met cost effectively throughout the project construction.
• Monitor status of interface activities between the different project packages to ensure that all interface related requirements are met during detailed engineering and according to the Project milestone schedule and completion priorities.
• Develop Interface documents, systems, diagrams, matrices etc. to coordinate completion of agreed deliverables.

Requirements

• Bachelor's Degree in Engineering (Degree must be recognized by the Professional Engineers Board, Singapore).
• 5 years’ experience of Front-end engineering, engineering design, procurement, construction, hook-up, and commissioning with a good understanding of technical integrity management systems, project management, quality and assurance systems.
• Green field project and a willingness and ability to work with all disciplines and nationalities.
• Teamwork skills being able to work with the various parties such as client, other contractors, sub-contractors, vendors to resolve issues and reach decisions that are in the best interest of delivering the implementation plan.
• Solid experience in project engineering and project management.
• High awareness of safe working practices associated with design, construction, tie-in, pre-commissioning, installation, hook-up and commissioning of environmental project.
• Strong interpersonal and English communication skills – verbal and written.
• Fully conversant in Microsoft Office Products (Outlook, Word, Excel, Power point, Project, etc.).

Responsibilities

• Assist in construction and basic design development phase. Preparation of equipment, technical specifications, general arrangement, detailed equipment compartment layouts, space coordination and equipment list.
• Review all mechanical equipment, vendor’s proposals for technical accuracy and constructability. Understand sizing of equipment and prepare equipment specification.
• Prepare working drawings, establish design criteria standards specification and mechanical construction guideline drawings.
• Develop and check an equipment’s handing study for marine spaces and decks.
• Check submittals and prepare the installation or construction drawings when needed.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Develop and check marine and drilling system PFDs or P&IDs, including equipment size systems and calculate pump system pressure losses.
• Coordinate / execute contract specification requirements and production inputs into engineering drawing / document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the mechanical schedule and project deliverables.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments.
• Perform any other tasks as may be assigned by the supervisor.
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements

• Minimum 3 years of relevant experience working in a marine/offshore industry and a Diploma in mechanical or marine or related engineering discipline or minimum 6 years working in a marine/offshore industry.
• Prior experience in newbuild andconversion of AHTS.
• Possessing knowledge in HVAC systems, piping, and mechanical equipment.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task.
• A team player with the ability to work independently as well as in a team.
• Able to perform marine equipment’s sizing.

• 5 days work week, Working Hours: 8.30am to 5.30pm
• Office location: Near Jurong East MRT
• Friendly working environment

Responsibilities

The Field Service Engineer is expected to perform the following technical support for semiconductor equipment at customer sites:

• Install, commission, calibrate and test automation machines with team members.
• Troubleshoot and repair machines malfunctions to minimize downtime.
• Conduct spare parts replacement.
• Provide routine technical support and on-site production assistance to clients.
• Monitor machine performance and submit report and feedback timely.
• Ensure all service activities comply with Safety and Regulatory Standards.
• Build and keep strong relationships with customers and internal team.

Requirements

• Diploma or Degree in Engineering, Factory Automation or related fields.
• Ability to read mechanical, pneumatic and electrical drawing/diagrams.
• Hands-on experience in machine installation and maintenance.
• Prior exposure to automation machinery in semiconductor industry is an added advantage.
• Good communication and problem solving skills.
• Basic proficiency in MS Office Applications (i.e. Excel, Word).
• Hands-on experience on Automotive servicing is welcome.
• Training will be provided.

Roles & Responsibilities

1. Handling full set of accounts –A/R,A/P,Cash Book, Journal(MYOB).

2.Prepare and process payments through electronic transfers, or other means

3.Prepare and submits GST on a quarterly basis.

4.Prepare Balance Sheet & Profit & Loss Schedules.

4.Liaise with external auditors, statutory bodies, company secretaries, and banking matters

5.Any other Accounting matters.

Requirements

1.At least 3 year(s) of working experience in the related field.

2.Ability to work independently and resourcefully in a fast-paced environment.

3.Applicants must be familiar with MYOB or similar accounting software.

4.Working hour : 8:00a.m. to 5:00pm; Monday to Friday

Job Description:
Landside infrastructure works, automated people mover depot, it facilitybuilding-east, automated people mover systems, contractor's office village andcoastal dormitory expansion for changi east development

Job Requirements:

• Minimum 8 years of relevant experience as a Mechanical and/or Electricalengineer
• Including at least 6 years in supervision of works of similar scale andcomplexity (major building, utilities laying, systems integration, T&C)
• Must have completed at least one (1) project in the capacity of SRE
• Prior exposure to airside environments and requirements is preferred

Degree Mech/Elec (PEB)

Directed multidisciplinary mechanical construction activities encompassing process piping, static equipment installation, storage tanks, structural steel erection, and plant infrastructure works across industrial projects.

• Managed project execution lifecycle, including planning, scheduling, resource allocation, procurement coordination, cost control, and progress monitoring to achieve project milestones within budget and schedule constraints.

• Led construction teams, subcontractors, and vendors to ensure compliance with engineering specifications, project quality requirements, and contractual obligations.

• Reviewed and validated engineering deliverables, including P&IDs, IFC drawings, Isometric Drawings, General Arrangement Drawings, Material Take-Offs (MTOs), and technical specifications to ensure constructability and execution readiness.

• Coordinated technical clarifications, design interfaces, site modifications, and approval processes with clients, consultants, engineering teams, and regulatory authorities.

• Developed detailed project schedules, execution strategies, construction work packages, method statements, and resource deployment plans to optimize productivity and project performance.

• Participated in tender evaluations, technical bid assessments, budget preparation, cost estimation, and commercial reviews for project acquisition and execution planning.

• Managed Mechanical, Electrical, and Process Utility installation activities across pharmaceutical, petrochemical, semiconductor, and oil & gas facilities while ensuring compliance with industry standards and client specifications.

• Administered inspection, testing, pre-commissioning, commissioning, and mechanical completion activities to facilitate successful system turnover and project handover.

• Coordinated client inspections, statutory approvals, work permits, quality audits, and acceptance testing activities throughout project execution.

• Monitored project performance through KPI-driven reporting, productivity analysis, risk mitigation measures, and corrective action implementation.

• Ensured strict adherence to Quality Management Systems(QMS), Inspection and Test Plans (ITPs), and applicable international codes and standards.

• Prefer to have CAD 3D, Microsoft vision knowledge to generate isometric piping diagrams and  P&IDs(Piping and Instrumentation Diagrams).

• Liaised with government agencies, statutory authorities, and regulatory bodies to monitor legislative changes, ensure regulatory compliance, and implement updated legal requirements within project operations.

• Maintained effective stakeholder engagement with clients, consultants, contractors, and senior management to ensure alignment of project objectives, technical requirements, and operational expectations.

• Required more than 5 to 10 years of experience.

Oversee preventive and corrective maintenance on machinery, equipment, and facility systems to ensure smooth operations.

Supervise troubleshooting of mechanical and electrical issues and carry out repairs in a timely manner to minimize downtime.

Conduct routine inspections and maintenance checks on production equipment and tools.

Assist in equipment installation, testing, and maintenance documentation as required.

Follow workplace safety procedures and maintain proper housekeeping standards within the work area.

Job brief

We are looking for a skilled Welder to cut and join metals and other materials at our facilities. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure.

A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential.

Responsibilities

• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, rulers etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
• Repair machinery and other components by welding pieces and filling gaps
• Test and inspect welded surfaces and structure to discover flaws
• Maintain equipment in a condition that does not compromise safety

Requirements

• Proven experience as welder
• Experience using a variety of welding equipment and procedures (TIG, MMA etc.)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Deftness and attention to detail
• Proficient in English
• Successful completion of a relevant apprenticeship program is required
• Professional Certification (e.g. an AWS welding certificate) will be a plus

Job Description

We are looking for a Quality Assurance Engineer to ensure that all products and processes meet customer, regulatory, and internal quality requirements. The role involves inspection, documentation, root cause analysis, and continuous improvement activities within a mechanical manufacturing environment.

Key Responsibilities

• Implement and maintain quality control procedures in accordance with company and customer requirements
• Conduct incoming, in-process, and final inspections of mechanical parts and assemblies
• Review and approve inspection reports, route cards, and quality records
• Handle non-conformance (NCR), corrective and preventive actions (CAPA)
• Perform root cause analysis and support improvement initiatives
• Support customer audits, internal audits, and supplier audits
• Liaise with production, engineering, and suppliers on quality issues
• Ensure compliance with ISO / customer quality standards and drawings

Requirements

• Diploma or Degree in Mechanical Engineering or related field
• Minimum 3 years of experience in Quality Assurance within a manufacturing environment
• Knowledge of mechanical drawings, GD&T, and inspection tools (e.g. vernier, micrometer, CMM is an advantage)
• Familiar with quality systems such as ISO 9001 / AS9100 (advantage)
• Strong problem-solving and communication skills
• Able to work independently and as part of a team

Preferred Skills (Advantage)

• Experience in aerospace / precision engineering environment
• Knowledge of NDT, FAI, PPAP, or customer-specific requirements
• Audit experience (internal or external)

Job Responsibilities

• Ensure product and process quality meet customer and company requirements
• Perform incoming, in-process, and final inspection of mechanical parts
• Handle non-conformance reports (NCR), corrective and preventive actions (CAPA)
• Review inspection reports, drawings, and quality documents
• Support internal, customer, and supplier audits
• Work closely with production and engineering teams on quality issues

Job Requirements

• Diploma or Degree in Mechanical Engineering or related field
• Minimum 3 years of QA experience in a manufacturing environment
• Able to read mechanical drawings and use basic inspection tools
• Familiar with ISO 9001 / AS9100 quality systems (advantage)
• Good communication and problem-solving skills

Company Overview

MASON INDUSTRIES PTE LTD is a Singapore-based company specializing in industrial solutions, delivering quality engineering services and project management to meet client requirements efficiently.

Job Summary

You will plan and prepare technical drawings, coordinate with customers and internal teams, and manage project documentation and budgets to ensure timely and cost-effective project delivery.

Responsibilities

• Plan and prepare technical drawings aligned with site requirements to meet project timelines
• Collaborate with customers to conduct technical analysis, perform engineering calculations, and manage submission processes
• Prepare comprehensive project documentation including reports, operation and maintenance (O&M) manuals, and as-built drawings
• Monitor project budgets by controlling costs and performing accurate cost estimations
• Execute production orders by coordinating activities between internal departments and customers to ensure smooth project flow