Total 4,946 operations engineer job vacancies in Engineering category in Singapore

Responsibilities

• Manage utility hook-up activities within the Semiconductor Plant to ensure timely and accurate installations
• Assist the Principal Engineer in overseeing project safety, design, planning, and installation of hookup activities to meet project deadlines
• Coordinate work schedules and tasks with subcontractors to ensure smooth and efficient hookup installation processes
• Liaise with subcontractors on interfacing issues including wall openings, structures, ducts, pipes, conduits, and other installation requirements
• Obtain necessary approvals, permits, and permissions to comply with regulatory and project standards
• Maintain and update utility mapping tables to support accurate project documentation and tracking
• Implement and maintain a Quality System such as on-site 6S management to promote workplace organization and safety
• Perform quality assurance and quality control (QA/QC) checks to verify material quality, installation accuracy, and testing compliance with in-house and industry standards
• Communicate effectively with clients and subcontractors to resolve issues and ensure project alignment

Preferred competencies and qualifications

• Diploma or Degree in Engineering, Project Management, or a relevant discipline
• Minimum 4 to 5 years of experience with General Construction Services (GCS) in a semiconductor plant for Engineer roles
• Fresh graduates are welcome to apply for Assistant Engineer positions
• Demonstrate independence, fast learning ability, and strong interpersonal skills to communicate effectively with clients and subcontractors

Responsibilities:

• Perform electrical and mechanical assembly work for the semiconductor industry.
• Perform equipment assembly according to engineering drawings.
• Perform installation, repair, inspection, reassembly, refitting, and adjusting products as required.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Maintain work area clean, safe, and orderly.
• Perform pipe and plumbing if needed.
• Planning / Scheduling and coordination of M&E works.
• Oversee and ensure works are carried out according to the approved drawings, materials, and method statements.
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Update the maintenance daily schedule.
• Any other duties as may be assigned.

Job Requirements:

• Minimum 3 years of relevant experience in the Construction industry.
• Diploma/ Degree in Mechanical & Electrical Engineering or related fields.
• Strong building and M&E knowledge with hands-on experience.
• Positive attitude, willingness to learn, and good team player.
• Entry-level candidates are welcome to apply.

Others:

• Working hours: Monday to Friday - 8:30 am to 5:30 pm
• Saturday - 8:30 am to 12:00 pm

• Ensuring works carried out meet company's quality standard and safety requirements
• Ensure site supervisors & foreman meet client and regulatory work requirements
• Co-ordinate with client, sub-cons project aspects
• Provide technical solutions
• Willing to take out challenging career

Requirements:

• Minimum 2 years of working experience in construction field
• Effective communication and coordination skills and team work
• Able to start immediately or within a short notice period will have added advantage
• Degree in related building construction field

Job Description

We are looking for a qualified and motivated Civil Engineer to join our team. The candidate will be responsible for planning, designing, supervising, and managing construction projects while ensuring quality, safety, and timely completion.

Key Responsibilities

• Supervise construction activities and site operations.
• Prepare and review project plans, drawings, and specifications.
• Monitor project progress and ensure adherence to schedules.
• Coordinate with contractors, consultants, and project stakeholders.
• Conduct site inspections and ensure compliance with safety standards.
• Prepare project reports, estimates, and documentation.
• Resolve technical and construction-related issues.

Requirements

Bachelor's Degree/Diploma in Civil Engineering.

Relevant experience in construction or infrastructure projects.

Proficiency in AutoCAD and MS Office.

Strong knowledge of construction methods and site management.

Excellent communication and problem-solving skills.

Ability to work independently and as part of a team.

Project/ Tender Support

• Prepare and assist senior engineers in developing project plans, schedules, and documentation during project or tender phase, demonstrating understanding of project management methodologies.
• Prepare and maintain project documentation, including daily progress reports, site diaries, and as-built drawings.
• Coordinate with contractors, subcontractors, and vendors as needed.
  Support site inspections and quality control checks.

Technical Assistance

• Understand client’s requirement and prepare engineering calculations and drawings under the guidance of senior engineers.
• Prepare and assist in the selection and specification of equipment and materials.\
• Research and analyse technical data.

Quality Assurance

• Conduct site inspections and quality control checks to ensure project compliance.
  
• Prepare and implement method of statement and processes for quality assurance.
  
• Coordinate and carry out testing and commissioning activities to ensure systems are operational and meet performance requirements.
• Prepare operational and maintenance manuals and as-built drawing for project handover.

Learning & Development

• Actively seek opportunities to learn and develop technical skills.
• Participate in training programs and workshops.
• Contribute to a positive and collaborative team environment.

Requirements:

• Bachelor's degree in Mechanical Engineering.
• Minimum 2 years of relevant experience in the construction industry.
• Basic understanding of MEP systems and design principles.
• Proficiency in MS Office Suite, and CAD software (e.g., AutoCAD).
• Strong attention to detail and organizational skills.
• Willingness to learn and adapt to new technologies and industry trends

A senior position may be offered depending on the candidate’s experience.

1. Design and coordinate (M&E) building services to meet project standards.
2. Consult with regulatory authorities to obtain necessary approvals ensure full compliance with statutory and project requirements.
3. Prepare detailed tender drawings and cost estimation.
4. Review shop drawings and technical specifications.
5. Monitor project progress and ensure smooth implementation of project.
6. Attend / conduct project meeting, site supervision and inspection carried out to the systems by contractors.
7. Management contract administration.
8. Coordinate and attend site inspections with clients upon project completion.

As a Staff Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Oversee day-to-day equipment maintenance activities, troubleshooting, and line issue management to ensure high equipment availability and minimal production downtime.
• Lead equipment reliability, maintenance, and engineering improvement initiatives to support stable and efficient manufacturing operations.
• Drive preventive and predictive maintenance strategies to improve equipment reliability, reduce failures, and sustain long-term operational performance.
• Lead equipment upgrades, machine conversions, and technology improvements to support next-generation HDD product requirements.
• Manage new equipment installation, commissioning, and acceptance testing to ensure systems meet operational, safety, and process specifications before production release.
• Monitor and analyze equipment performance, reliability, and OEE data to identify improvement opportunities and drive operational excellence.
• Lead root cause analysis for equipment failures, implementing effective corrective and preventive actions to prevent recurrence.
• Collaborate with Process Engineering and Sputter Yield teams to improve yield performance, reduce defects, and enhance process capability.
• Coordinate closely with Production, Quality, Facilities, and other cross-functional teams to ensure smooth production operations and achieve manufacturing targets.
• Manage engineering projects related to equipment upgrades, modifications, and system improvements, ensuring timely execution within scope and budget.
• Provide technical leadership, guidance, and mentorship to junior engineers and technicians to strengthen team capability and technical competency.
• Develop and maintain engineering documentation, including SOPs, maintenance procedures, and best practices for equipment operation and sustainment.
• Ensure all equipment and related systems comply with safety regulations, company policies, and industry standards.
• Support continuous improvement initiatives by introducing new technologies, automation solutions, and engineering best practices.
• Strengthen knowledge sharing and technical skill development within the engineering team to build a high-performing equipment engineering organization.
• Maintain strong collaboration with OEM suppliers and technical partners to support equipment upgrades, troubleshooting, and technology development.
• Perform other duties and responsibilities as assigned by management.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform failure analysis, root cause investigation, and fault isolation on SSD products during NPI, qualification, and mass production phases using test logs, diagnostic tools, and hardware analysis techniques. 

• Debug hardware and manufacturing-related failures by analyzing tester logs, power rails, NAND, DRAM, controller behavior, and interface issues to drive corrective and preventive actions. 

• Collaborate with cross-functional teams including Product Engineering, Process Engineering, Quality, Manufacturing, and Suppliers to resolve yield, process, and test related issues. 

• Develop and maintain debug procedures, cookbooks, troubleshooting guides, debugging tools, and knowledge databases to improve diagnostic accuracy, turnaround time (TAT), and operational efficiency. 

• Generate technical reports and present failure findings, corrective actions, and yield improvement recommendations to management and stakeholders while supporting continuous improvement initiatives. 

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.

Job Description:

• Analyse SPC chart. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyse split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on pass down to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Manufacturing can have more flexibility.
• Perform process matching between equipment to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self-audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics /Microelectronics / Chemical Process Engineering / Chemistry / Physics related major
• Min 2 years working experience in Diffusion (implant, Furnace and WET/Clean Tech) Process.
• Good interpersonal skills and is an excellent team player
• Logical thinking capability and good analytical skill
• Highly level of integrity with good ownership and accountability
• Passion for the semiconductor / manufacturing industry

Job Description & Requirements

You will be responsible to provide an excellent and consistent level of service to your customers. The Technician is responsible to assist in the smooth and efficient running of the Engineering Department in support of all other operating departments.

Qualification in Electrical/Mechanical Engineering and/or Building Management/Facilities Management

Minimum 2 years work experience as Technician/Tradesman in a hotel or a similar large building/complex with central plant

Must have knowledge and hands-on skills in, Electrical, Plumbing, HVAC, and Painting.

4 off days monthly, rest days depend on schedule. able to work long hours and late in evenings and weekends

Competitive salary 3k and above

Positive and nurturing working environment

Work location: islandwide

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

EA reg no R1550906

Requirements:

• Degree/Diploma in Computer Science, Information Technology, Electronics Engineering, or related field
• 6+ years of experience in DevSecOps, DevOps, or related roles
• Proficiency in at least three scripting/programming languages (e.g., Bash, PowerShell, Python, Go)
• Strong experience with Git and modern branching strategies
• Hands-on experience with public cloud platforms (AWS, Azure, or Google Cloud)
• Expertise in infrastructure automation tools (Ansible, Terraform, Puppet, Vagrant)
• Experience with virtualization technologies (VMware, KVM, Hyper-V)
• Strong knowledge of containerization (Docker, Kubernetes)
• Experience building and managing CI/CD pipelines (GitLab, Jenkins, Bitbucket, ArgoCD)

Roles & Responsibilities

We are looking for someone who has Building and Construction, Steel and Structural, and Safety Knowledge, or the construction site knowledge professional firm.

Job Descriptions:

· Monitor and Handle quality, Budget, Quality, Product Knowledge, and arrangement for site delivery and site - matter.

· Handle and Instructions employees on machine operation, safety, and company policies.

· Inspect Inputs/outputs to check for QC/materials., PO from established quality standards.

· Coordinator workflow, processes, and machineries.

· Research or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.

· Monitor team and work procedures to meet production schedules

· Provide direction for project tasks and hold all team members accountable for safety, quality, and production

· Conduct daily briefings with workers to review site goals and performance feedback

Qualifications and Requirements:

· Minimum of 2 years++ experience as a site engineer in construction and Steel of Structural, or having related safety certificate, etc.

· In-depth knowledge of extrusion procedures, equipment, and WSH guidelines.

· Able to read and understand the AutoCAD or 3D drawings.

· Problem-solving abilities and Responsivity and Mature

· Trueful and Honesty

· Observant and alias the project, dateline, and follow instructions by the production Supervisors, and follow closely and with the administration work.

1. Have experience in lightning protection system and earthing system (LPS&ESS) in Singapore, familiar with the electrical technical standards, LPS&ESS regulations and requirements in Singapore.

2. Participate in relevant technical meetings of consultants, Main contractors, and the owner.

3. Be responsible for the cable work of part of equipment.

4. Mainly be responsible for the LPS&ESS work on site.

5. Be responsible for the progress and quality control of the LPS&ESS site work; ensure compliance with the drawings and the requirements of Singapore, be responsible for the testing and site inspection on site, prepare and submit inspection forms.

6. Cooperate with LEW to prepare BCA acceptance documents, Cooperate in the relevant inspection and handover work.