Total 17,493 process improvement manager job vacancies in Singapore

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by performing routine shift activities to ensure the production process strictly follows company safety standards and local environmental regulations, and product quality is within customers’ requirements.

Responsibilities:

• Support Shift Supervisor in handling plant commissioning, start-up, shutdown and production activities
• Support production, quality control and maintenance operations to meet production schedules, quality and cost objectives. Production activities include performing in-process quality testing, product sample collection, plant patrolling & data logging, catalyst preparation, equipment preparation for maintenance and loading & unloading of process solvents, property analysis etc.
• Carry out routine checks to ensure safe operation and optimal performance of manufacturing process and equipment
• Operate the DCS and other plant equipment in accordance to SOP
• Perform lab analysis for in-process products
• Perform emergency response in areas of firefighting, rescue and loss containment
• Perform housekeeping in the process area
• Uphold safety standards of the company
• Provide training and guidance to junior technicians

Requirements:

• NITEC or Higher NITEC in Chemical Process Technology, Chemical Technology or Diploma in Chemical Engineering with at least 5 years of relevant experience in the petrochemicals industry
• Entry level candidates without experience are welcome to apply with us
• Experienced candidates with more years of related experience may be considered for the Senior Process Technician position
• Experience in DCS operation, boiler operation and CERT will be advantageous
• Self-motivated and effective team player with good communication skills
• Proficient in Microsoft Office applications
• Able to perform rotating shift work
• Willing to work in Jurong Island
• Able to perform overtime work if required

Job Description

• Lead and manage the eletrical engineering design works.
• Prepare and review the deisgn of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and eletrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specificaions and design standard are met.
• Prepare all relevant checklists for installation, testing and commissioning works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cablnig works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system anaylsis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• WIll be required to work full time at project site.

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Responsibilities:

- Provide engineering support to manufacturing equipment and processes

- Carry out Preventative Maintenance of production equipment

- Troubleshoot and repair faulty production equipment

- Improve and upgrading of Production equipment hardware and control (software)

- Identify and rectify process problems for quality improvement/scrap reduction

- Updated and control of equipment spare parts

- Installation and qualification of new processes and equipment

- Support new program/model start-up

- Minimizing machine downtime, scrap raw materials/products

- Maintaining correct spare parts inventory and product quality

- Communicating with production operators/supervisors and other support groups

- Having a high level of expertise and practical knowledge in various molding processes

Job Requirement :

- Diploma in Engineering or equivalent

- 2 years of relevant working experience

- Proficient with PLC Programming

- Able to perform shift work and OT

- Able to start work immediate or short notice

Responsibilities

• Verify and analyze hold lot rejects whether valid, invalid and escalate if in doubt or not meeting internal requirements
• Ensure smooth release of hold lots to meet shipment through verification, analysis and disposition
• Pre-alert, trigger and feedback hold lot or issues to upstream process for containments and/or action improvements
• Provide hold lot or low yield reports to engineering team for tracking, monitoring, continuous improvements and/or escalation
• Coordinate and follow up with cross functional team on incoming and Backend lot disposition to ensure shipment deliverables

Requirements

• Higher Nitec or Nitec in any Engineering field
• Minimum 3 years working experience preferred

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Roles and Responsibilities:

•  Ensure timely submission of process deliverables, including PFDs, P&IDs, hydraulic profiles, equipment sizing, HAZOP study reports, etc

•  Lead in the P&ID (Piping and Instrumentation Diagrams) drawings submissions utilizing Bentley OPPID, PFD (Process Flow Diagrams), and mass balance calculations

•  Lead in RO Membrane design selection and process.

·   Participate and coordinate in HAZOP (Hazard and Operability) studies for the overall plant and its systems/sub-systems.

•  Integrate equipment and material capabilities to meet process module and technology specifications.

•  Taking the lead in discussion with clients on planning and execution of the testing and commissioning for successful project completion.

•   Analyze and review current processes to streamline them for improvement, productivity enhancement, sequence optimization, unit improvement, and troubleshooting of the plant during testing and commissioning.

•   Attend technical meetings with clients, vendors, sub-contractors, and internal project teams.

•  Collaborate with various disciplines engineers to ensure all interfacing issues are aligned and resolved to mitigate engineering rework.

·   Any other ad-hoc engineering duties to support the Project Manager for successful execution of the project.

Job Description

• Industry/ Organization Type: Waste Management
• Position Title: Process Engineer
• Working Location: Tuas (Company transport provided)
• Working Hours: 5 days (Mon - Fri, 8.00am - 5.00pm)
• Salary Package: Basic salary up to $4,300 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Analyze and evaluate current processes, take measurements, and interpret data, including SCADA system operations
• Conduct risk assessments to ensure safe operations
• Research, design, and develop processes to improve productivity and workflow
• Oversee day-to-day operations and maintenance of facility processes
• Organize and set up efficient operations
• Manage the implementation of new processes and procedures
• Troubleshoot and resolve issues related to processes, procedures, and operations
• Develop best practices, routines, and innovative solutions to improve output and quality
• Manage process costs and timelines
• Prepare process documentation and operating instructions
• Participate in Process Safety Management (PSM) and Hazard and Operability (Hazop) studies
• Plan and execute plant shutdowns as a turn-key manager

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering
• At least 2 years of experience in the process industry
• Good knowledge of process standards, process improvement, and safety management
• Team-oriented and adaptable

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75664 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

Applied Materials is seeking a highly experienced and strategic Director, Technical Engineering (NAND) to lead technology engagement, process engineering excellence, and customer collaboration for advanced NAND memory solutions. You will work closely with key customers and internal stakeholders to solve complex integration challenges and influence product and technology roadmaps.

Key Responsibilities

• Act as the subject matter expert for NAND technologies. Drive development and optimization of process solutions across etch, deposition, patterning, and integration.
• Lead root cause analysis and resolution of complex yield and defectivity issues. Guide technical strategy aligned with future NAND technology nodes.
• Serve as the primary technical interface for strategic NAND customers. Build strong relationships with customer engineering and fab leadership.
• Lead technical reviews, escalations, and roadmap discussions. Translate customer requirements into actionable engineering solutions.
• Oversee PSE activities covering installation, qualification, and process optimization.
• Drive improvements in yield, throughput, and tool performance. Establish best practices and ensure consistent execution across global teams.
• Partner with R&D, Product Engineering, Operations, and Commercial teams. Provide field insights to influence product development and enhancements.
• Build organizational capability in advanced NAND process technologies. Foster a culture of innovation, accountability, and customer focus.

Requirements

• PhD or Master’s in Electrical Engineering, Materials Science, Physics, or related discipline.
• 15+ years in semiconductor industry with strong focus on NAND memory.
• Experience in process integration or module engineering (etch, deposition, CMP, or patterning).
• Proven years of experiences in leading and mentoring a highly-performing and technical engineering teams.
• Proven track record supporting high-volume manufacturing and customer-facing roles.
• Experience with leading NAND manufacturers is highly preferred.

Work Location

• Upper Changi

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborate with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks as assigned to support project and team objectives

Requirement

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.