Total 14,754 Others software test engineer job vacancies

About the role:

The Process Engineer II is to Support/lead troubleshooting of manufacturing operations Upstream process/product issues. Technical subject matter expert (SME) for manufacturing operations to resolve process issues, perform root cause analysis and impact assessment for process investigations. Support evaluation of technologies, plan and execute process improvements. Support and execute global manufacturing science initiatives. Plan, support and execute site manufacturing science activities such as continuous process verification (CPV) program, technology transfer of new products and process monitoring and trending.

Responsibilities:

• Support site manufacturing upstream activities through

• Planning and executing activities required for process investigation such as performing process impact assessment, participating and performing root cause analysis. Work with cross functional teams for process issues investigation

• Analyzing process trends, monitoring process performance as part of the CPV program. Escalate and perform investigation in event of any out of trend or process issues

• Leading process investigations to identify root cause and implement action plans to correct or prevent re-occurrence

• Planning and executing process improvements and robustness projects

• Leading/supporting cycle development for process parameters where applicable

• Drafting process training slides and providing process training to cross functional teams

• Raising change controls as change owners for process changes

• Performing impact assessments for relevant change controls

• Providing technical /process parameters for creation and revision of master batch records. Review master batch records.

• Lead/Support technology transfer for new technologies/product introduction through

• Leading/Supporting the evaluation of new manufacturing technologies and/or equipment for process improvement or process capabilities build.

• Planning and executing technical transfer activities according to project timelines. Raise change controls where applicable to support the technical transfer.

• Monitoring process performance and trending through the site CPV program. Proactively investigate where required to ensure process robustness.

Performing risk assessment, drafting required technical transfer and process control strategy documents and updating lifecycle documents.

Authoring study and process validation protocols and reports where needed.

• Support audits, regulatory submissions and responses.

• Support and execute global manufacturing sciences initiatives according to project timelines.

• Responsibility to adhere to any applicable EHS requirements.

• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.

• Any other duties as assigned by supervisor.

What you bring to Takeda:

Education and Experience Requirements

• Bachelor’s Degree in Biochemistry, Chemistry, Chemical Engineering, Biotechnology, Biochemical Engineering with minimum 3 - 4 years of relevant experience or Master’s Degree with 2 years of relevant work experience or a fresh PhD in the relevant technical area.

• Hands-on experience with cell culture/ upstream processes and/or downstream processes in a manufacturing or development environment.

• Has knowledge of cGMPs.

Key Skills and Competencies

• Strong technical knowledge and proficiency in process understanding and application in biopharmaceutical processes

• Strong analytical skills including demonstration of systematic evaluation of potential issues, correlation or cause and effect relationships, root cause analysis methodology

• Good communication skills

• Willingness to learn

• Team worker/ able to work in matrix environment

• Independent worker/ Self starter.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Research-Engineer-%28IC-Designer%29/33449-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer for the (SHINE) Centre 2.0 co-led by Professor Massimo Alioto, at the Department of Electrical and Computer Engineering, National University of Singapore (NUS).

The selected candidate is expected to work on:

•    physical, thermal and circuit-to-system modeling, design exploration, architecture and validation/testing framework
•    chip and substrate model iterative fine-tuning (e.g., thermals, parasitics), early raw dataset creation from circuit/system simulations, final raw dataset creation from iterative measurements, prototype circuit design, system assembly and testing
•    data gathering and preparation, AI model architecture evaluation, training/inference implementation and integration with chip architecture
•    end-to-end system modeling, exploration, architectures and system integration
•    analog frontend circuit and sensor modeling, exploration, verification and testing
•    authoring high-quality research papers for leading conferences and journals and presenting findings at international conferences.
•    managing technical milestones for the project

The appointment can commence immediately with a 1-year contract, with prospect of extension. Salary will be commensurate with qualifications and experience.

Qualifications

The candidate must possess:
•    a Masters/Bachelor degree in either Electrical Engineering or strictly related (e.g., Computer, Electronics, Communication, or Information Engineering).
•    Knowledge on circuit architectures, transistor-level design.
•    Knowledge on silicon chip design, EDA tools.
•    Ability to work independently and collaboratively in a team environment.
•    Good communication and interpersonal skills.
•    Open to fixed term contract.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Description

• Develop and maintain relationships with owner groups and B2B clients in Singapore, while promoting the Gree brand and building long-term partnerships.
• Establish and maintain strong relationships with owner groups, MEP consultants, and main consultants to understand project requirements and provide support to the business team.
• Develop and maintain cooperation for government procurement projects and support Gree’s entry into government procurement systems.
• Collect and analyze industry information, including market size, development trends, customer segments, customer needs, and solution offerings.
• Participate in key project relationship management and project follow-up to ensure smooth progress and successful project closing.
• Manage and empower the B2B team by developing promotion strategies for owner groups, MEPs, and consultants to improve sales performance.
• Enhance brand awareness and market competitiveness through stakeholder engagement, promotional activities, and industry events to drive business growth.
• Monitor competitor activities and market trends to support strategic business decisions.

Requirements

• Proven track record in project sales, ideally within the HVAC or broader building services industry
• Strong technical knowledge and understanding of HVAC systems and their applications
• Excellent communication and presentation skills to engage effectively with customers
• Ability to work in a target-driven environment and meet or exceed sales goals
• Familiarity with relevant industry regulations and standards
• Relevant engineering degree or equivalent technical qualification
• Ability to communicate fluently in English and Mandarin to effectively manage relationships with regional clients and key stakeholders across Asian markets.

Role Purpose:

• Responsible for the technical aspects of a particular assigned job to achieve a correct, complete and coordinated design deliverables (ie. calculations, drawings, specifications, reports, etc…
• Assists Lead/Senior piping engineer in achieving project completion within budget and on schedule
• Works independently or with Lead/Senior Engineer in the detailed design;
• To plan, monitor and track the day-to-day engineering activities and contractor’s site progress

Job Responsibilities:

• Assists in the preparation and maintaining the Project job file, data books, drawings, specification lists, lists of required design data and design change notices;
• Assists in preparing Piping material specifications, pipe stress, pipe support specifications
• Assists in preparing Plot plan and Equipment layout drawings;
• Prepare / Review Piping General Arrangement drawings;
• Prepare / Review isometric drawings and vessel trim drawings;
• Prepares Tie-in List and Tie-in Location plan;
• Performs pipe stress analysis for critical lines;
• Review of standard Pipe support and Piping detail drawings;
• Conducts material take-offs and compile Piping Bill of material;
• Prepares material requisition for Manual valve, Bulk Pipe/fitting and Specialty item;
• Assists in preparation of Piping subcontract requisition.

Job Requirements:

• Degree in Engineering
• At least 10 years of relevant experience
• Experience in Engineering design firm of Petrochemical, Refinery and Chemical plant preferred
• Experience in Space management, Plant design and Piping engineering work
• Good understanding of Equipment/Piping layout
• Design and construction experience in Petrochemical, Refinery and chemical industry preferred
• Experience in Plant Design and Piping engineering works
• Basic understanding of Equipment/Piping layout and space management

Job Responsibilities

• Lead the Extra-Low Voltage systems design on assigned large scale projects during the tender, design, procurement, construction, commissioning until finale client acceptance phase
• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of Lead Engineer, if necessary
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit, Gas Detection and Fire Alarm systems with the support of a Lead Engineer if necessary
• Design of Information Technology cabling System with the support of a Lead Engineer if necessary
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of Lead Engineer if necessary
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design
• Technical Evaluation of vendor submission including approval of shop drawings
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems
• Guiding ELV engineers / Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic

Job Requirements

• Degree in Instrumentation and Controls Engineering 
• At least 8 years of experience in design and construction
• Experience in design, installation, programming, commissioning of Process and Building control systems
• Experience in design, selection, installation, commissioning of Instrumentation for Process and Building control systems   
• Experience in Extra Low Voltage Systems such as Fire Alarm, Security systems, IT data network
• Experience in Advanced Technology Facilities, Life Science & Chemicals, Energy & Environment Technologies, High Tech Infrastructure, Process Automation, Products and Services
• Experience in construction management

Responsibilities

• Install, configure, maintain, and troubleshoot electronic security systems including CCTV, Access Control Systems, Intrusion Detection Systems, Intercom Systems, and Visitor Management Systems.
• Support system integration, testing, commissioning, and handover of security solutions at customer sites.
• Design, configure, and maintain network infrastructure supporting security systems, including switches, routers, firewalls, VLANs, and wireless networks.
• Monitor security systems and network infrastructure to ensure optimal performance and system uptime.
• Perform preventive maintenance, system upgrades, firmware updates, and corrective maintenance for installed systems.
• Diagnose and resolve technical faults, alarms, and system failures in a timely manner.
• Support centralized security management platforms and monitoring systems.
• Ensure cybersecurity protection of security devices and networks through proper configuration and best practices.
• Coordinate with clients, vendors, and subcontractors for project execution, maintenance, and technical support.
• Conduct site surveys and support project implementation activities.
• Maintain accurate documentation including system configurations, network diagrams, maintenance reports, and service records.
• Provide technical support and training to customers and internal teams.
• Ensure compliance with company standards, safety requirements, and industry best practices.

Requirements

• Diploma or Degree in Electronics, Electrical Engineering, Information Technology, Computer Science, Telecommunications, or related field.
• Minimum 3–5 years of experience in electronic security systems, CCTV, Access Control, or related ELV/security industry.
• Good understanding of IP networking concepts such as TCP/IP, VLANs, routing, switching, and wireless networks.
• Hands-on experience with CCTV systems, Access Control Systems, Intrusion Detection Systems, and integrated security solutions.
• Familiarity with leading security platforms such as Hikvision, Axis, Milestone, Genetec, Bosch, Honeywell, or similar systems.
• Basic knowledge of network security principles, firewalls, VPNs, and cybersecurity best practices.
• Experience in system installation, configuration, testing, and commissioning.
• Ability to troubleshoot hardware, software, and network-related issues.
• Strong communication skills and ability to work with customers and project teams.
• Ability to work independently and handle site-based work and multiple projects.
• Willingness to work after office hours or attend emergency maintenance when required.
• Certifications such as CCNA, Security+, or vendor certifications in CCTV/access control systems will be an added advantage.

Job Description

• Industry/ Organization Type: Distribution (Audio Visual)
• Position Title: Audio Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Set up or help install audio systems.
• Program and fine-tune audio systems.
• Ensure all audio equipment is up to standard and working well.
• Handle termination, testing, and commissioning of audio systems.
• Help with audio system design.
• Complete any other assigned tasks.

APPLY NOW!!!

• Degree or certification in audio engineering or a related field.
• Strong knowledge of recording, mixing, and mastering techniques.
• Ability to troubleshoot technical issues and ensure audio clarity.
• Attention to detail and ability to work under tight deadlines.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74911 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Field Service Engineer

Job Summary

• Maintain and troubleshoot hardware and infrastructure supporting a mission-critical Command & Control (C2) system.
• Provide system maintenance and support to ensure high levels of reliability, availability, performance, and security.
• Work as part of a dedicated engineering team supporting critical operational environments.

Key Responsibilities

Warranty Administration

• Maintain accurate warranty records for installed hardware.
• Assist in warranty claim administration and coordination with vendors/subcontractors.
• Inspect repaired components and verify serviceability.
• Perform integration, configuration control, and testing of repaired hardware.

Corrective Maintenance & Field Support

• Perform corrective maintenance activities for hardware failures.
• Restore systems to operational status within SLA requirements.
• Monitor and maintain system availability and reliability metrics, including:Mean Time Between Failures (MTBF)Mean Time To Repair (MTTR)System downtime recordsHardware defect tracking
• Troubleshoot and resolve hardware-related issues in production environments.

Field Testing & System Validation

• Conduct software and system testing following bug fixes, patches, and deployments.
• Validate system functionality after software upgrades and maintenance activities.
• Ensure correct system configurations are loaded before testing and production use.
• Support deployment verification and acceptance testing activities.

Spares Management

• Manage inventory of spare parts, test equipment, and maintenance tools.
• Perform receiving, issuing, storage, and disposal activities.
• Conduct serviceability checks on spare components.
• Coordinate repair and replacement of faulty spare equipment.
• Monitor end-of-life (EOL) and end-of-support (EOS) status of hardware assets.

Preventive Maintenance

• Execute preventive maintenance activities according to approved schedules and procedures.
• Perform system inspections, calibration, servicing, and configuration verification.
• Follow approved maintenance checklists and standards.
• Prepare and submit preventive maintenance reports upon completion.

Calibration Services

• Coordinate with vendors for calibration of maintenance and test equipment.
• Ensure calibration schedules are maintained and equipment remains compliant.

General Duties

• Support operational readiness and system availability requirements.
• Perform additional technical and operational duties as assigned.

Technical Skills & Experience

Infrastructure & Hardware Support

• HP Servers
• Cisco Network Switches
• Cisco Wireless Access Points
• Uninterruptible Power Supply (UPS)
• Remote Input-Output (RIO) Systems
• Programmable Logic Controllers (PLC)
• IP55/IP65 Outdoor Racks
• Video Wall Systems
• Keyboard, Video, Mouse (KVM) Systems

Systems & Operations

• Mission-Critical Systems Support
• Hardware Troubleshooting & Diagnostics
• Corrective & Preventive Maintenance
• System Testing & Validation
• Configuration Management
• Hardware Lifecycle Management
• Spare Parts & Asset Management
• System Reliability & Availability Monitoring
• SLA Compliance Management
• Incident Resolution

IT Service Management

• IT Service Management (ITSM)
• Incident Management
• Change Management
• Problem Management
• Service Delivery Best Practices

Technical Competencies

• Reading and interpreting system architecture diagrams
• Understanding operational and user environments
• Root cause analysis and troubleshooting
• Documentation and reporting
• Vendor coordination and management

Requirements

• Diploma or bachelor's degree in engineering, preferably Electrical Engineering or Info-Communication Engineering.
• Minimum 2–3 years of experience supporting any of the following Servers, Cisco Networking, UPS, RIO, PLC, Outdoor Racks, Video Wall and Systems KVM
• Minimum 2–3 years of experience supporting mission-critical environments with stringent SLAs (e.g., 99.9% availability).
• Strong understanding of ITSM standards, processes, and best practices.

Soft Skills

• Customer-focused with strong service orientation.
• Strong analytical and problem-solving abilities.
• Good listening and communication skills.
• Positive attitude and willingness to learn new technologies.
• Ability to work independently and within a team environment.
• Comfortable working in fast-paced, high-pressure environments.
• Adaptable, proactive, and self-motivated

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to Quesscorp Singapore’s PDPA and e2i’s PDPA

Job Description

• Industry/ Organization Type: Manufacturer- Precision Engineering
• Position Title: Sales Engineer (Semiconductor)
• Working Location: Ang Mo Kio
• Working Hours: 5 days (Monday-Friday, 9:00AM - 6:00PM)
• Salary Package: Basic + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Drive revenue growth by identifying sales opportunities with both new and existing customers.
• Foster and maintain relationships throughout the sales cycle to build long-term trust.
• Execute targeted sales strategies in alignment with company goals.
• Conduct weekly customer visits and report findings.
• Collaborate in management meetings to enhance sales tactics.
• Provide customized solutions for customer challenges and requirements.
• Facilitate clear communication between customers and technical teams.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Bachelor’s degree or Diploma in Engineering or related field.
• Minimum 3 years of relevant experience.
• Experience in backend semiconductor testing preferred.
• Proficient in delivering presentations.
• Able to travel overseas (if required).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #77166 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

About the Role

We are seeking a highly skilled DevSecOps Engineer to design, automate, and maintain secure, scalable, and resilient infrastructure and deployment pipelines. You will play a key role in integrating security into development workflows and infrastructure operations across cloud and on-premise environments.

This role requires strong expertise in cloud platforms, infrastructure automation, CI/CD, security engineering, and modern DevSecOps practices. You will work closely with engineering, operations, and security teams to drive automation, reliability, and compliance at scale.

Job description:

Key Responsibilities

• Design, implement, and maintain GitLab CI/CD pipelines to enable reliable continuous integration, delivery, and deployment.

• Perform routine infrastructure activities accurately and consistently, with minimal operational errors.

• Develop reusable and modular automation scripts to streamline recurring operational tasks.

• Apply Terraform to manage infrastructure-as-code for new deployments, configuration changes, and ongoing platform improvements.

• Deploy and configure complex systems and infrastructure components independently across IaaS, PaaS, and SaaS environments, ensuring alignment with functional, security, and policy requirements.

• Prepare implementation-ready architecture and configuration plans covering compute, storage, network, identity, security, and management components.

• Build and maintain automated scripts and tools to strengthen DevSecOps practices, including software composition analysis and container scanning.

• Manage, optimise, and troubleshoot AWS services such as ECS, ECR, Aurora, WAF, Network Firewall, Transit Gateway, ALB, NLB, and related services.

• Implement cloud security best practices, with emphasis on identity management, logging, monitoring, and incident response.

• Work closely with development and operations teams to embed security practices throughout the software development lifecycle.

• Conduct regular security assessments, vulnerability scans, and penetration testing activities to identify and remediate risks.

• Contribute to robust monitoring, alerting, observability, and Application Performance Monitoring setups, using data and analytics to troubleshoot and improve system reliability.

• Apply SRE practices such as error budgets, toil reduction, and SLI/SLO definition in day-to-day engineering work.

• Drive infrastructure tasks independently from planning through completion, proactively resolving or escalating issues before they impact delivery.

• Monitor and validate production and proof-of-concept changes, incorporate user feedback, and resolve issues in a timely manner.

• Communicate risks early and propose practical mitigation options to team leads.

• Good to have: knowledge of Microsoft Entra, Microsoft Graph API, and AWS Lambda using Python serverless development.

Requirements

• Minimum of 2 years of experience in DevSecOps and/or cloud infrastructure management.

• Hands-on experience designing and maintaining GitLab CI/CD pipelines.

• Proficiency in managing AWS services, including ECS, ECR, Aurora, WAF, Network Firewall, Transit Gateway, ALB, NLB, EC2, and Lambda.

• Strong scripting capability in Python or Bash for automation and operational efficiency.

• Practical experience using Terraform for infrastructure-as-code.

• Familiarity with containerisation technologies such as Docker and Kubernetes.

• Experience with security tools and practices, including software composition analysis and container scanning.

• Understanding of SRE principles and operational reliability practices.

• Strong analytical, troubleshooting, and problem-solving skills, with the ability to collaborate effectively in cross-functional teams.

Preferred Qualifications

• Knowledge of Microsoft Entra, Microsoft Graph API, and AWS Lambda using Python serverless development.

• AWS associate-level certification, such as AWS Certified SysOps Administrator or an equivalent relevant certification.

• Software development background with knowledge of secure coding practices.

- Deals with clients,designers, consultants and contractors, supervies and implements projects fromstart to the completion and handover.

- Perform preventive andcurative Electrical and instrument maintenance.

- Project planning &coordination including preparation of drawing and explain to team.

- Procurement andscheduling of electrical works.

- Settle issues onsystems after handover during the defects and liabilities period.

Supervisesduring the construction stage from start to the completion and handover of theproject.

-Minimum Diploma or Degree in Engineering or similar field its equivalent.

-Good interpersonal skills and pro-active in problem solving.

-Proficient in Microsoft office - Word, Excel & Powerpoint.

Knowledgein other design related software such as Autocad and Autocad 3Dmax.

-Can work under pressure and team player.

-Able to work long hours due to project urgency if needed.

- Qualityfocused and ability to meet deadlines in fast-paced project environment.

-Ad-hoc duties

Job Description

• Industry/ Organization Type: Engineering Services
• Position Title: Electrical Engineer
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri: 8.45am – 5.45pm)
• Salary Package: Basic $4,000 – $6,800 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Lead and supervise electrical engineering design, shop drawings, and technical documents.
• Oversee and coordinate site installation, cabling, testing, and commissioning of electrical systems.
• Ensure work follows project specifications, standards, and statutory regulations.
• Coordinate with consultants, subcontractors, suppliers, and other engineering teams to resolve site and technical issues.
• Review and approve material submissions, method statements, and equipment specifications.
• Monitor project progress, work quality, and safety for electrical works.
• Provide technical guidance and support to junior engineers and site staff.
• Prepare reports, as-built documents, and handover documents.

APPLY NOW!!!

• Degree or Diploma in Electrical Engineering or a related discipline.
• At least 6 to 8 years of electrical engineering experience in large-scale building or industrial projects.
• Good knowledge of LV/MV electrical system design, installation, and commissioning.
• Familiar with BMS integration and coordination with other M&E systems.
• Good understanding of Singapore codes, standards, and authority submission requirements.
• Proficient in electrical design software, AutoCAD, and Microsoft Office.
• Good leadership, analytical, and communication skills.
• Able to work on-site at Tuas and manage multiple priorities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781