Total 2,788 Senior Executive software engineer job vacancies

Job Description:

• General Failure Analysis Engineer
• Perform sample preparation (cross section, parallel lapping, chemical decapsulation), use of ion miller, FIB and other preparation techniques;
• Perform failure analysis using various tools and instruments such as SEM, EDX, 2D/3D X-ray;
• Communicate with customer for selecting proper analytical technique and data interpretation;
• Prepare analytical reports;
• Assist in new failure analysis techniques development;
• Perform routine instrument preventive maintenance and laboratory housekeeping

Job Requirements:

• At least Degree in Electrical / Electronic Engineering; Material Science Engineering; Science & Technology; with a minimum of 2 years of relevant working experience.

• Candidates without experience are welcome to apply;
• Must be able to perform FA study individually and work well in teams;
• Maintain good 6S practice during daily operation;
• Experience in FA techniques including: Sample preparation (cross section, parallel lapping, chemical decapsulation), X-Ray, SEM and FIB would be a bonus;
• Experience in Wafer Fab/Semiconductor/LED/Solar/HDD industries would be useful;
• A team player who can be independent, hardworking with a persevering attitude.

Job ID: 20211

• Location: West (Company transport provided)
• Working hours: 8.30am - 5.30pm
• Salary: up to $4,600 (Depending on experiences)

Job Description

Define and perform DET characterization on hard disk Head/Media. Lead a group of Engineering Assistant, technicians and inspectors to perform Guzik Dynamic Electrical Testing (DET).

• Lead and supervise Engineers, Assistant Engineers, Engineering Assistants, Technicians, and Operators to achieve departmental goals and objectives.

• Perform full hands-on operation, setup, and troubleshooting of Guzik DET machines or equivalent HDD component testing equipment, with strong knowledge of HDD head and media component testing algorithms.

• Ensure consistent machine uptime and adequate manpower planning to support continuous R&D and Mass Production (MP) operations.

• Evaluate new machine technologies to support customer product roadmaps and prepare technical evaluation reports.

• Drive continuous research and development of critical Guzik parameters to support HDD performance improvement.

• Conduct in-depth analysis and investigation of media magnetic properties versus electrical performance.

• Plan and manage direct and indirect materials for budgeting, logistics, and inventory control purposes.

• Coordinate with other client sites for technology and methodology information sharing.

• Ensure compliance with ISO Standard Operating Procedures and safety practices.

• Perform any other duties as assigned by the immediate superior.

Job Requirement

Qualification

• Bachelor’s Degree or Master’s degree in Electronics Engineering or a related discipline.

Experience

• Degree holder with at least 4 years of relevant working experience.

Skills (Must have)

• Proficient in Microsoft Office applications (Word, Excel, PowerPoint).

• Strong communication and analytical skills.

• Working knowledge of evaluation and testing techniques.

• Knowledge of Visual Basic–based and Python software programming.

• Proficient in statistical analysis tools such as Minitab, JMP, Spotfire, or equivalent software.

Others

• Able to work in a cleanroom-based environment.

• A team player with the ability to work independently when required

Interested applicants, kindly send your updated resume to Joanne (R21101135) Joanne@pasona.com.sg with the email subject header "Job Application for "20211, R&D Test Engineer / Senior Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Location: Pioneer (With company bus pick up)
• Working hours: 8.30am - 5.30pm
• Up to $5,000 (Basic Salary, Depending on experiences)
  

Job Description

Optimizing hard disk storage: Implement strategies to maximize existing storage capacity and explore potential upgrades for significant storage expansion.

Improving sputter machine stability: Focus on enhancing the reliability and performance of the sputter machine and its processes.

1) To lead a group of sputter Engineer Assistant to conduct daily sputtering work

2) To develop new multilayers thin film structure for new hard disk media programs

3) To duplicate hard disk media structure based on design transferred

4) To monitor sputter process & machine stability

5.) Ensure compliance to ISO quality and Safety standards

6) Any other duties as assigned by superior

Job Requirement

・Bachelor/ Master Degree in Materials Science Engineering

・Research fellow in A star research institute (Advantage)

・Working experience more than 2 years in semiconductor field or hard disk industry

・Understanding of Magnetic material multi layers design

・Sputtering machine hardware modification & improvement

・Materials Science Knowledge is a must

・Materials Characterization Skills, ie XRD, AFM, ESCA/XPS is a must

・Thin Film manufacturing process, ie PVD & CVD is a must

・Python Coding knowledge is a plus

・SPC (Statistical Process Control) knowledge is a plus

・After work hours commitment needed (twice a week)

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Khoo Tiffany

EA Registration No: R22107626

Pasona Singapore Pte. Ltd.

EA License No: 90C4069

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Manage overall project management on new equipment buyoff, installation and associated activities.
• Collaborate with internal and external stakeholders for smooth production transfer of equipment to mass production.
• Collaborate with machine suppliers to drive for equipment efficiency and process improvement.
• Work closely with PM team in establishment of effective PM system for continuous sustenance of machine and spare inventory.
• Identify and close gaps between different working level or parties within the company.
• Develop expertise to improve the assigned equipment platform, maintain and repair semiconductor process equipment.

Requirements

• Degree / Diploma in any Engineering field with relevant hands-on experience.
• Knowledge and experience in handler models (Epson/Hontech-Logic/ATC/SLT/Matrix/MT9510/Castle/Chroma) will be an added advantage.
• Possess strong mechanical / electronics / electrical knowledge and interest.
• Effective communication and interpersonal skills.
• Logical analysis / thinking and possess strong motivation to hone hands-on technical skills.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

What You Will Do

• Maintain and support wafer test equipment or metrology tool readiness in the fab
• Perform preventive maintenance (PM) and troubleshooting of wafer test equipment
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed
• Tool types: KLA, AMAT, ONTO, or Unity

What You Will Need

• Bachelor’s Degree in engineering or equivalent
• 5 years of relevant experience in equipment engineering, preferably in a wafer fab / Electronics / Electrical industry
• Proven ability to identify, assess and solve problems
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

We are seeking and experienced hardware engineer to join our team to develop next generation distributed IO products.

As a Senior Hardware Engineer, you will use your electronics design experience to design, develop and test next generation distributed IO products. You will work closely with other engineers and cross functional teams to ensure the successful completion of projects.

The environment fosters a collaborative and innovative approach. It is dynamic, fast-paced, and requires a highly motivated individual with a passion for product development. You will be supported with mentorship and coaching. With success in this role, you will have the opportunity to grow into roles with increased scope and responsibility.

You will report to Engineering manager and follow a Hybrid working schedule in Singapore

Your responsibilities

• Design and develop hardware system and component, including component selection, design tolerance analysis, schematics design and PCB layout.

• Perform circuit analysis and simulations to ensure product design is meeting the functionality and performance requirement.

• Prepare hardware qualification test plans, and execute tests for hardware qualification, product certification and/or regulatory compliance.

• Prepare and execute hardware fault insertion test.

• Collaborate with cross-functional engineers to ensure product specifications are met.

• Stay up to date with emerging hardware technologies and industry trends.

The Essentials - You Will Have:

• Bachelor or Master's degree in Computer Engineering, Electrical/Electronic Engineering, or related field.

• 3+ years of experience in product hardware design and development.

• Strong knowledge of analog and digital circuits, PCB design and layout.

• Strong experience in EMI noise reduction techniques/countermeasures for PCB layout.

• Experience with creating UL/ATEX compliant design (isolation / spacing), preventing and eliminating EMC/EMI issues.

• Good experience in Signal Integrity, Power Integrity and Timing Analysis for Digital Circuit.

• Experience in simulating analog circuit performance and reliability (e.g., using software such as MathCad, LTspice/Saber or similar).

The Preferred - You Might Also Have:

• Programming skills in Python, LabVIEW or other test automation tools/software is a plus.

• Experience with Rockwell Automation Software programming tools and programming skills in Ladder Logic is a plus

• Experience with functional safety product design with IEC61508, safety data calculation, and certification is a strong plus.

Our benefits package includes …

• Comprehensive mindfulness programmes with a premium membership to Calm

• Volunteer Paid Time off available after 6 months of employment for eligible employees

• Company volunteer and donation matching programme – Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation.

• Employee Assistance Program

• Personalised wellbeing programmes through our OnTrack programme

• On-demand digital course library for professional development

• ... and other local benefits!

At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles.

#LI-NB1

#LI-Hybrid

• Drive technical excellence, process stability, and operational readiness by providing engineering leadership, equipment expertise, and continuous improvement initiatives to support business and customer requirements.
• Lead the setup, validation, and optimisation of testing workflows, equipment configurations, and operational processes.
• Develop, implement, and maintain SOPs, work instructions, and engineering standards to ensure process consistency and compliance.
• Manage the full equipment lifecycle, including installation, preventive maintenance, troubleshooting, upgrades, and replacement planning. Job Description
• Monitor engineering performance metrics and recommend solutions to improve process capability and equipment uptime.
• Investigate and resolve complex technical and equipment-related issues, serving as the key escalation point for operational teams.
• Drive continuous improvement initiatives to enhance productivity, quality, reliability, and operational efficiency.
• Support New Product Introduction (NPI), new line setups, process transfers, and engineering change implementations.
• Partner with cross-functional teams to ensure smooth deployment of new equipment, technologies, and operational processes.
• Deliver technical training and coaching to operations teams to strengthen equipment knowledge and troubleshooting capabilities.
  

Requirements

• Degree in Engineering or a related technical discipline.
• Minimum 8 years of relevant engineering experience in manufacturing, logistics, automation, or a high-volume operational environment.
• Strong hands-on experience in equipment implementation, process setup, commissioning, and optimisation.
• Ability to work independently and lead technical initiatives in a fast paced environment.
• Proven track record in troubleshooting complex technical issues and driving continuous improvement initiatives.
• Experience supporting NPI, process transfers, or new line implementation projects.
• Strong stakeholder management, problem-solving, and project management skills.
• Work Location:Greenwich Drive
• Salary Range $5,690 – $7,800
• Working Hours Mon – Fri, 0800 – 1745

JOB ID: GT/AH0008

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to gesse.tan@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

• 20 Cecil Street, #08-09, Plus Building, Singapore 049705
• Tel: 69509745
• EA Licence Number: 02C4944
• EA Registration Number: R1108448
• EA Personnel: Tan Lili Gesse

THE ROLE:

DFT engineer will lead strong engineering team on Scan, MBIST, iJTAG test development of latest AMD products. The IPs range from complex processors, AI computation blocks, to state-of-the-art controller IPs which provide automotive, data center, machine learning and high-speed communication solutions. You will work closely with designers to make sure DFT structures are correctly implemented, with test engineers to make sure ATE test programs can be generated from the DFT (ATPG, MBIST) tools, with product engineers to make sure scan/MBIST production test can run seamlessly and stable, and with yield engineers to debug and root-cause failures/defects. You will get the opportunity to expand technical knowledge beyond DFT into embedded processor firmware, complex chip simulation, RTL implementation for ASIC & FPGA and deep silicon debug works all the way to high-volume production requirement. This is the role to oversee complete silicon cycle from design to production phases.

THE PERSON:

We are looking for candidates that can communicate complex engineering subjects effectively to cross functioning technical teams and upper management. Strong DFT and leadership skills will be put to good use. Successful Member of Technical Staff DFT engineer will interact with many external teams and must confidently represent his/her organization.

KEY RESPONSIBILITIES:

• Manage DFT engineers resolving technical challenges and meeting product schedule
• The role is in AMD global quality and operation organization driving best manufacturing test solution through pre and post silicon activities
• Work closely with design teams and make sure DFT structures are correctly implemented.
• Responsible for developing, implementing and verifying DFT schemes on hard-IPs in AMD ASIC and FPGA products.
• Responsible for developing and implementing techniques to test digital logic, using Scan Compression, Stuck-at, Transition and Path-Delay fault models
• Responsible for testing other parts of the design, including memory, mixed-signal, I/Os, custom LBISTs & MBISTs, IEEE1149.1 JTAG and IEEE1687 IJTAG
• Responsible to develop Firmware driven cost-effective test strategies/methodologies with built-in diagnosis capability to enable efficient debugging and fault isolation on bench/ATE
• Collaborate closely with the New Product Introduction and Test/Product teams to ensure timely delivery of robust test patterns, and manage debugging of pattern issues on bench/ATE to root cause the problem
• Assist in Diagnosis and Yield enhancement through product lifecycle
• Develop an adaptive and cohesive team to take up any challenging tasks entrusted by management

PREFERRED EXPERIENCE:

• Experience DFT engineering experience through DFT pre and post silicon cycles
• Experience in creating and implementing complex chip-level DFT architecture
• Experience in DFT implementation including Scan and Scan Compression at IP and SoC level
• Experience with DFT tools, ATPG (Stuck-At, At-Speed, Path-Delay) and scan compression.
• Strong MBIST knowledge
• Knowledge of Tessent Streaming Scan Network SSN and hand-on experience is a big plus
• Proficient in logic design using Verilog and experience in synthesis and STA
• Experience in developing test benches and simulation in RTL/GATE/SDF environments
• Knowledge of FPGA synthesis and design flow is a plus
• Experience with post-silicon debug and bench equipment (e.g., oscilloscope and logic analyser)
• Good communication skills, works well in a group environment that spans across continents
• Comfortable in Linux environment and writing/using scripting languages such as Perl, Tcl, etc

ACADEMIC CREDENTIALS:

• MS or Ph.D. in Electrical/Electronic/Computer Engineering

Test Strategy & Development

• Develop cost-effective and high-efficiency test solutions for GaN and Silicon device families.
• Create, debug, and release test programs on discrete testers and mixed signal ATE platforms. Lead the transition of legacy platforms to new technology nodes.

Hardware Design & Requirements

• Lead the design reviews and acceptance of high-performance test interface hardware provided by external vendors.
• Design test hardware including load boards, probe heads, and sockets.
• Define test hardware requirements based on device specifications and characterization data

Execution & Sustaining

• Support New Product Introduction (NPI) through validation, release, and yield ramp activities.
• Provide sustaining support for production products and test platforms.
• Lead platform conversions and drive efficiency improvements across multiple ATE systems.

Technical Expertise

• Apply knowledge of wide bandgap semiconductors, power devices, and analog measurement techniques.
• Perform high-voltage and high-current testing safely and efficiently.
• Use lab tools such as oscilloscopes, DMMs, spectrum analyzers, and ATE debugging utilities.

Cross-functional Collaboration

• Partner with design, product, reliability, test, and operations teams to ensure smooth project execution.
• Organize technical data and present findings for engineering and management teams

Looking to expand our network team with an experienced Network Engineer.

Senior Network Engineer should have worked with :

• Enterprise level Network Experience
• Network Architecture Experience
• Hands on L1, L2, and L3 work experience within data centers.
• Perform Troubleshooting activity with various customers, and at data centers. (also able to run cables to test network connectivity)
• networks hands on experience is a must.
• Project management skills required on managing timeline, and working with Operation Team on scheduling and deadlines, as well as customers on their requirements and their timeline.

Requirements.

• Degree holder welcome.
• Renumeration based on experience.
• Outdoor work and overtime work may be required when needed.
• all other network professional papers and certifications would be a bonus
• 8 to 10 years of working in network architecture environment.

Responsibilities :

• Support the technical team and construction team for all design matters.
• Review all technical documentation and drawings of the Project works.
• Work closely with consultant on the scope of services, design and project deliverables to enhance site efficiency and constructability.
• Manage design approval process and coordination with the clients, consultants and subcontractors in a timely manner to resolve all technical issues.
• Ensure strict compliance of the design in accordance with contractual requirements.
• Ensure the distribution of all the approved and latest drawings and other relevant documents to the relevant parties
• Prepares shopdrawings with in-house BIM team and/or subcontractors and obtains approval in advance to site installation dates
• Raises queries to Client or handles Client's clarification on technical requirements pertaining to the Project works.
• Identifies and highlight to management and project team of any potential risks or issues that will impact project performance.
• Prepares and presents design progress status and slides to management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e. Architectural, MEP, BIM, etc( on design to ensure delivery of high quality outcome.
• Support tender team and prepare technical tender documents as per specifications for bidding of civil and structural engineering projects as when assigned.
• Attends Progress Meetings, Technical Meetings, Coordination Meeting, Site Meetings, etc.

Requirements :

• PE Board Recognised Degree in Civil Engineering
• Minimum 5 years of design management experience with at least 3 year of design experience in consultant firm.
• Strong coordination and collaboration with other disciplines.
• Good interpersonal and communication skills .
• Good organization and time management skills.

Responsibilities:

• Design and review mechanical layouts for warehouse automation systems using AutoCAD
• Integrate AGV, AMR, and shuttle systems within warehouse infrastructure
• Diagnose and resolve mechanical issues in automation equipment (e.g., AGVs, conveyors, AMRs)
• Support on-site installation, commissioning, and system testing
• Collaborate with vendors and cross-functional teams to ensure timely project delivery
• Supervise small teams or subcontractors and provide technical guidance
• Travel as required for site inspections, installations, and troubleshooting

Qualifications:

• Diploma or Degree in Mechatronics, Mechanical, Electrical, or related field.
• Basic understanding of mechanical systems, electrical wiring, sensors, and actuators.
• Exposure to PLC or automation systems is an added advantage.
• Strong practical knowledge in automation and control systems, electrical schematics, system integration, and mechanical troubleshooting.
• Demonstrated experience in project leadership or small team management.
• Strong analytical thinking and decision-making abilities.
• Open to travel and site-based work when required.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

Contributes to the development of new analytics tool, software, and approaches, including the design, development, troubleshooting and debugging.

  *   Ongoing maintenance, update and support of the existing programming and analytic tools

  *   Develop, implement and maintain server and database infrastructure, hardware and software to ensure maximum tool uptime and performance.

  *   Execute end-to-end data processing workflows, ensuring data is accurately ingested, cleaned and structured across corporate systems.

  *   Manage and monitor data flows between current and future infrastructure components to maintain data integrity and consistency.

  *   Analyze processed data to uncover trends, patterns and operational performance metrics using statistical techniques.

  *   Exercises significant independent judgment to determine best method for accomplishing work and achieving objectives

  *   Leads and /or provides expertise to functional project teams and may participate in cross-functional initiatives.

The requirements:

  *   5 years of hands-on experience in data engineering and analytics

  *   Strong skills in statistical tools and programming languages such as Python, R, etc.

  *   Experience with data analysis / visualization tools and software like Power BI, Looker, Databricks etc.

  *   Proficiency in SQL for data extraction and manipulation.

  *   Attention to detail and a commitment to data accuracy.

  *   Proactive approach to identifying issues and providing solutions.

  *   Strong analytical and problem-solving skills. Ability to analyze complex datasets and translate data into actionable insights.

  *   Ability to present complex information in an understandable and compelling manner.

  *   Excellent written and verbal communication skills

  *   Ability to work independently and collaboratively as part of team