Total 13,645 Others procurement engineer job vacancies

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

Who are we?

Equinix is the world’s digital infrastructure company®, shortening the path to connectivity to enable the innovations that enrich our work, life and planet. 

A place where bold ideas are welcomed, human connection is valued, and everyone has the opportunity to shape their future.

Joining our operations team means being at the center of everything – maintaining and evolving critical infrastructure that powers the digital world and delivers real impact for our customers, communities and society. You’ll find belonging, purpose, and a team that welcomes you—because when you feel valued, you’re empowered to do your best work.

Job Summary

A senior, highly skilled specialist responsible for ensuring the reliability, availability, and safe operation of mission‑critical data center infrastructure through advanced controls and automation systems. The Senior Critical Facilities Engineer (Controls) applies deep expertise in BMS, control systems, and system integration to monitor, optimize, and stabilize critical facilities operations. This role operates with a high degree of independence within standard operating procedures and supports operational excellence by improving system behavior, alarm management, and control logic across the site.

Responsibilities

Facility / Infrastructure Maintenance

• Performs specialized preventive and corrective maintenance with a focus on controls, automation, and monitoring layers supporting critical facilities systems.
• Acts as a technical authority for Building Management Systems (BMS), DCOS, and associated control platforms, ensuring reliable monitoring and control of power, cooling, and life‑safety systems.
• Monitors and analyzes complex alarms, trends, and events within the BMS, independently resolving issues related to control logic, system behavior, and signal integrity.
• Leads investigation of abnormal system behavior, including false alarms, control sequence failures, sensor drift, and communication faults, recommending corrective actions.
• Supports control system interfaces across mechanical and electrical systems (e.g. chillers, CRAH/CRACs, generators, UPS interfaces), working closely with Electrical and Mechanical CF teams.
• Reviews, validates, and optimizes alarm configuration, thresholds, and escalation logic to reduce noise and improve incident response effectiveness.
• Supports configuration, testing, and validation of control strategies during maintenance windows, system upgrades, or commissioning activities.
• Implements and supports energy efficiency and optimization initiatives through improved control strategies, setpoint tuning, and automated response mechanisms.
• Works on assignments requiring significant judgment and initiative, fully understanding how controls failures or misconfigurations can impact customer infrastructure, availability, and SLAs.

Vendor Support

• Acts as the primary technical interface for controls and BMS vendors, integrators, and service providers.
• Reviews and validates vendor proposed control logic, graphics, and sequences of operation to ensure alignment with site standards and operational intent.
• Assists with the creation, review, and approval of Maintenance Operation Protocols (MOPs) and scripts related to control system changes.
• Oversees vendor execution during controls‑related maintenance, system upgrades, or retrofits, including pre‑work briefings, live supervision, and post‑work validation.
• Ensures control system documentation, network diagrams, point lists, and as‑built records are maintained accurately.

Site Administration & Incident Support

• Prepares and maintains specialized documentation for control system operations, alarm management, and automated response mechanisms.
• Identifies Single Points of Failure (SPOFs) and systemic risks within the controls and monitoring layer and recommends architectural or configuration improvements.
• Responds to on‑site incidents involving BMS failures, alarm floods, loss of visibility, or automation defects, providing controls expertise during restoration.
• Leads or contributes to Root Cause Analysis (RCA) related to controls, automation, or monitoring system failures.
• Supports on‑site teams during incidents by providing control‑system insight, diagnostic guidance, and decision support.
• Ensures controls‑related procedures, alarm management policies, and change processes are followed consistently during normal operations and incidents.

Work Orders & Additional Projects

• Completes skilled work requests related to control system changes, monitoring enhancements, and automation improvements.
• Supports commissioning, re‑commissioning, and control validation activities for new or modified infrastructure.
• Implements approved changes to controls logic, alarm strategies, and system interfaces in support of operations and improvement initiatives.
• Executes and supports complex controls‑focused projects, including BMS upgrades, platform migrations, and integration of new plant systems.
• Supports life‑cycle management and end‑of‑life replacement of controls hardware, networks, and software platforms.
• Recommends controls and automation improvement projects based on operational data, incident trends, and system performance.

Collaboration

• Collaborates closely with Electrical, Mechanical, Operations, Security, and IT teams to ensure controls systems accurately reflect facility behavior and operational needs.
• Acts as a technical mentor for engineers in the areas of BMS usage, alarm interpretation, and control system troubleshooting.
• Works with stakeholders to forecast controls‑related spare parts, licensing, and system capacity requirements.
• Serves as a senior controls subject‑matter expert during incidents, complex changes, and multi‑discipline projects.

Qualifications

• Proven experience supporting controls, BMS, automation, or monitoring systems in mission‑critical environments such as data centers, smart buildings, utilities, or industrial facilities.
• Diploma or Degree in Controls Engineering, Electrical Engineering, Mechanical Engineering, Automation, or Building Services Engineering preferred.
• Hands‑on experience with BMS / DCOS platforms, PLC‑based systems, alarm management strategies, and system integration is highly desirable.

Equinix is an Equal Employment Opportunity and, in the U.S., an Affirmative Action employer.  All qualified applicants will receive consideration for employment without regard to unlawful consideration of race, color, religion, creed, national or ethnic origin, ancestry, place of birth, citizenship, sex, pregnancy / childbirth or related medical conditions, sexual orientation, gender identity or expression, marital or domestic partnership status, age, veteran or military status, physical or mental disability, medical condition, genetic information, political / organizational affiliation, status as a victim or family member of a victim of crime or abuse, or any other status protected by applicable law. 

What you'll do:

As a Project Engineer based in Singapore’s vibrant manufacturing sector, you will be entrusted with overseeing complex capital projects from their earliest stages through to successful completion. Your day-to-day responsibilities will involve collaborating across multiple departments—such as production, supply chain management, quality assurance, safety compliance, engineering design—and engaging with external contractors or suppliers. You will be responsible for developing detailed plans that outline scope, budgetary constraints, scheduling milestones, resource allocation strategies as well as risk mitigation approaches. Throughout each phase of the project lifecycle—from conceptualisation through engineering design to installation and commissioning—you will ensure that all activities adhere strictly to established safety protocols and factory standards. Your ability to manage stakeholder expectations while maintaining meticulous documentation will be crucial in achieving seamless handovers upon project completion. By driving plant optimisation initiatives alongside routine upgrades or expansions of production lines or utilities infrastructure you will contribute directly towards enhancing operational efficiency within a dynamic team-oriented environment.

• Support the annual capital expenditure planning process by developing comprehensive project charters for approved initiatives that align with organisational objectives.
• Define clear project scopes, objectives, budgets, schedules, and resource requirements to ensure successful project execution from inception to completion.
• Prepare detailed project documentation including charters, cost estimates, schedules, risk assessments, progress reports, and close-out materials to maintain transparency throughout the project lifecycle.
• Monitor project expenditures diligently to ensure effective cost control measures are implemented at every stage of the process.
• Develop robust engineering solutions and layouts that strictly comply with safety regulations, hygiene protocols, quality benchmarks, and manufacturing standards.
• Coordinate civil, structural, mechanical, electrical, and utility requirements for new installations by liaising with relevant stakeholders both internally and externally.
• Review technical specifications thoroughly to guarantee all engineering deliverables meet or exceed internal compliance standards.
• Manage relationships with contractors, suppliers, and equipment vendors during project implementation to ensure seamless integration of new systems into existing operations.
• Oversee procurement processes for equipment as well as original equipment manufacturer (OEM) activities and installation works to facilitate timely project progression.
• Lead commissioning efforts including testing and start-up activities while coordinating closely with operations, maintenance, quality assurance, and engineering teams during handover.

What you bring:

To excel as a Project Engineer in this role you will draw upon extensive experience gained within large-scale manufacturing environments where you have successfully managed complex capital projects from conception through execution. Your educational background in an engineering discipline equips you with the technical foundation necessary for developing innovative solutions tailored specifically towards improving plant performance or expanding production capabilities. Beyond technical proficiency you possess exceptional interpersonal skills which allow you to foster collaborative relationships across multidisciplinary teams—ensuring alignment on shared goals while navigating competing priorities effectively. Your attention to detail when preparing documentation combined with your commitment towards upholding rigorous safety standards positions you as a dependable partner throughout every stage of the project lifecycle. Additionally your familiarity with industry-specific regulations such as GMP or SHE requirements enables you to anticipate potential challenges proactively thereby safeguarding both operational integrity and regulatory compliance.

• A degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Industrial Engineering or a closely related discipline is required for this role.
• You bring 8–12 years of proven experience in manufacturing project engineering or managing capital expenditure projects within industrial settings.
• Demonstrated success in delivering factory expansion projects or leading equipment installation initiatives within fast-moving consumer goods (FMCG), food manufacturing or pharmaceutical environments is highly desirable.
• A thorough understanding of manufacturing operations coupled with deep knowledge of relevant engineering standards and stringent safety requirements is essential.
• Experience managing contractors as well as building productive relationships with suppliers and external vendors forms a core part of your skill set.
• Familiarity with recognised project management methodologies along with strong command over project controls ensures effective oversight throughout each phase of delivery.
• Excellent communication skills enable you to provide regular updates to key stakeholders while facilitating smooth collaboration between cross-functional teams.
• Exposure to multinational manufacturing environments enhances your ability to adapt best practices across diverse operational contexts.
• Hands-on experience in end-to-end management of CAPEX projects—including equipment procurement through commissioning—is highly advantageous.
• Knowledge of GMP (Good Manufacturing Practice), food safety protocols or SHE (Safety Health Environment) requirements would further strengthen your application.

What sets this company apart:

This organisation stands out as a leader in its field by prioritising employee wellbeing alongside operational excellence. With a strong emphasis on flexible working opportunities employees are empowered to achieve an optimal balance between professional commitments and personal aspirations. The company fosters an inclusive culture where knowledge sharing is actively encouraged—enabling individuals at all levels to learn from one another while contributing unique perspectives towards collective success. Ongoing training programmes support continuous professional development ensuring that team members remain at the forefront of industry advancements without sacrificing job satisfaction or work-life harmony. By championing open communication channels across departments this employer creates an environment where everyone feels valued respected—and motivated—to deliver their very best every day

What's next:

If you are ready to take on a rewarding challenge where your expertise can make a tangible difference we encourage you to explore this opportunity further!

Apply today by clicking on the link provided—your next career move could be just around the corner.

Do note that we will only be in touch if your application is shortlisted.
Robert Walters (Singapore) Pte Ltd
ROC No.: 199706961E | EA Licence No.: 03C5451
EA Registration No.: R1871051 Gregorio Tabusalla Cazalis

Company Overview

Founded in 2013, MQ Solutions & Services builds lasting business relations by upholding Moral Quotient—understanding right from wrong and acting on core values—in Information and Communication Technology.

Job Summary

Provide on-site IT support by troubleshooting and resolving desktop PC and printer issues, deploying hardware and software, and serving as the first point of contact for IT-related customer calls in a fast-paced environment.

Responsibilities

• Troubleshoot and resolve desktop PC and printer issues on customer sites to ensure minimal downtime
• Serve as the first point of contact for customer IT-related calls, providing timely and effective support
• Deploy new hardware and software across multiple users and locations to maintain up-to-date IT infrastructure
• Install and troubleshoot IT hardware and software in a large, fast-paced user environment to support operational continuity
• Perform ad-hoc IT maintenance and support tasks as assigned by the reporting manager
• Collaborate with team members and interact professionally with customers and vendors to deliver quality service
• Maintain a customer-focused approach by diligently addressing service issues and ensuring customer satisfaction
• Demonstrate self-motivation and commitment to completing assigned duties efficiently
• Standby duties may be required, including working at customer premises as needed

Required competencies and certifications

• Proficient in Microsoft Operating Systems (XP, Vista, Windows 7, 2000, 2003, 2008) for desktop and server support in end-user environments

Preferred competencies and qualifications

• Strong interpersonal, analytical, and problem-solving skills to effectively address IT issues
• Experience working in teams and managing interactions with customers and vendors

• Define and execute a comprehensive test automation strategy aligned with project objectives, delivery timelines, and quality goals.
• Architect and develop scalable, reusable automation frameworks across web, mobile, API, and system integration layers.
• Embed automation within Agile and DevOps workflows, enabling seamless CI/CD pipeline integration.
• Establish best practices and standards for test script development, code quality, reviews, and reusability.
• Lead the design, development, execution, and ongoing maintenance of automated test suites for internet and mobile banking platforms.

• Drive automation coverage across functional, regression, API, performance, and security testing.
• Integrate automation tools and frameworks into build, deployment, and release pipelines.
• Manage automation environments, test data strategies, and continuous test validation processes.
• Lead, mentor, and develop a team of automation engineers across onshore, offshore, internal, and external teams.

• Work closely with QA Leads, Developers, DevOps Engineers, and Business Analysts to embed automation throughout the delivery lifecycle.
• Engage business and technology stakeholders by reporting on automation coverage, progress, effectiveness, and ROI.

Quality & Risk Assurance

• Ensure automation frameworks meet banking-grade security, compliance, and regulatory standards.
• Identify opportunities to optimize manual testing through automation to improve speed, quality, and efficiency.
• Drive continuous improvement by evaluating and adopting new automation tools, frameworks, and technologies.

Requirements

• Bachelors degree in Computer Science, Information Technology, or a related discipline.
• Minimum 7 years of QA experience, including at least 3 years in an Automation Lead or similar role.
• Strong hands-on expertise with automation tools and frameworks such as Selenium, Appium, Playwright, or equivalent.
• Proven experience in API testing using tools such as Postman or Karate.
• Solid understanding of CI/CD pipelines and tools (e.g., Jenkins, GitLab, Azure DevOps).
• Strong programming or scripting skills in Java, Python, JavaScript, C#, or similar languages.
• Experience working with banking or financial services systems, particularly internet and mobile banking applications.
• ISTQB Test Automation Engineer, Certified SDET, or equivalent certification is highly preferred.
• Experience with cloud-based testing platforms (e.g., BrowserStack) is an advantage.
• Exposure to performance testing tools (e.g., JMeter) and security testing frameworks is preferred.
• Familiarity with corporate banking products such as cash management, payments, FX, and trade finance is a plus.

To apply, please visit www.gmprecruit.com and search for Job Reference: V6335R36

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

We are seeking a highly motivated MEMS Wafer Fab Yield Engineer to join our advanced wafer manufacturing team. This role is responsible for driving fab yield analysis and yield improvement through strong data analytics and deep understanding of MEMS fabrication processes. The ideal candidate brings hands‑on knowledge of wafer fab yield, strong problem‑solving skills, and the ability to communicate effectively and collaborate within team and across global, cross‑functional teams.

Job Description

What a Fab Yield Improvement Engineer does at HP:

• Perform timely investigation of yield excursions, defects, and parametric shifts using data‑driven statistical analysis of fab data.

• Lead and drive yield improvement projects, from problem definition through root cause analysis, solution implementation, and sustained results.

• Develop and maintain a deep understanding of MEMS wafer fab processes, process integration, and tool interactions across the manufacturing flow.

• Partner with process integration, process, equipment, product, and operations teams to define corrective and preventive actions.

• Collaborate closely with worldwide (WW) fab, technology, and product teams to align on yield strategies, goals, share best practices, and support cross-site yield improvement initiatives.

• Prepare clear yield reports and technical presentations to communicate findings, progress, and recommendations to stakeholders.

Key Qualifications

• Bachelor or master’s degree in Materials Science, Chemical Engineering, Mechanical Engineering, Physics, or a related discipline.

• More than 2 years of experience in MEMS or semiconductor wafer fabrication, with exposure to fab processes, yield analysis, or defect investigation. Hands‑on experience in process integration or yield improvement is an advantage.

• Hands on experience of SPC, yield pareto analysis, defect density, or fab data analysis.

Individuals who do well in this role at HP typically possess:

• Strong understanding of semiconductor or MEMS wafer fab processes.

• Solid analytical and problem‑solving skills across multiple technical disciplines, with strong attention to detail.

• Good project management skills, including timeline, risk, and resource management.

• Strong interpersonal skills with the ability to work independently and in cross‑functional teams.

• Ability to perform under tight timelines in a fast‑paced manufacturing environment.

• Strong communication skills, including written, presentation, and influencing skills.

• High ownership, accountability, and an agile, results‑oriented mindset.

• Strong team player with a collaborative attitude.

• Willingness to travel overseas periodically for short‑term business trip.

• Ability to work in a cleanroom environment.

  
  Disclaimer
  This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Full Stack Engineer (Google Cloud)

Role Overview

We are seeking a skilled Full Stack Engineer with strong hands-on experience in Google Cloud Platform (GCP) to design, develop, and maintain modern, scalable web applications. The successful candidate will work across the entire stack — from front-end interfaces to back-end services and cloud infrastructure — and play a key role in delivering secure, high-performing solutions.

Key Responsibilities

• Design, develop, test, and deploy full stack web applications across front-end and back-end layers.
• Architect, deploy, and manage applications on Google Cloud Platform (GCP), leveraging services such as Compute Engine, Cloud Run, GKE (Kubernetes Engine), Cloud Functions, Cloud SQL, Firestore, BigQuery, Pub/Sub, and Cloud Storage.
• Build and maintain CI/CD pipelines to enable automated builds, testing, and deployments.
• Develop and integrate RESTful APIs and microservices.
• Collaborate with product managers, designers, and other engineers to translate business requirements into technical solutions.
• Ensure applications adhere to security best practices, performance benchmarks, and scalability requirements.
• Monitor, troubleshoot, and optimize application performance using Cloud Monitoring, Cloud Logging, and Error Reporting.
• Participate in code reviews, contribute to technical documentation, and mentor junior team members where applicable.
• Stay current with emerging cloud-native technologies and recommend improvements.

Core Requirements

• Bachelor's Degree or Diploma in Computer Science, Computer Engineering, Information Technology, or related discipline.
• Proven hands-on experience as a Full Stack Engineer, developing production-grade applications.
• Strong front-end development skills (e.g., React, Angular, or Vue.js) with proficiency in HTML5, CSS3, JavaScript/TypeScript.
• Solid back-end development experience using languages such as Node.js, Python, Java, Go, or .NET.
• Hands-on experience with Google Cloud Platform (GCP), including deploying and managing workloads on services such as Cloud Run, GKE, Compute Engine, Cloud Functions, Cloud SQL/Firestore, BigQuery, Pub/Sub, and Cloud Storage.
• Experience implementing CI/CD pipelines (e.g., Cloud Build, GitHub Actions, GitLab CI, Jenkins).
• Strong understanding of containerization (Docker) and orchestration (Kubernetes).
• Proficiency in working with relational and NoSQL databases.
• Familiarity with Infrastructure as Code (IaC) tools such as Terraform or Deployment Manager.
• Solid understanding of API design (REST/GraphQL), microservices architecture, and event-driven systems.
• Knowledge of cloud security best practices, IAM, and networking on GCP.

Preferred / Nice-to-Have

• Google Cloud certifications, such as:

• Google Associate Cloud Engineer

  Google Professional Cloud Developer

  Google Professional Cloud Architect

• Experience with multi-cloud or hybrid-cloud environments (AWS, Azure, Cloudflare Workers).
• Exposure to DevOps practices, observability tools, and SRE principles.
• Experience working in Agile/Scrum environments.
• Familiarity with serverless architectures and event-driven design.

Soft Skills

• Strong analytical, problem-solving, and debugging skills.
• Excellent communication and collaboration abilities.
• Self-motivated, proactive, and able to work independently as well as in a team.
• Ability to manage multiple priorities in a fast-paced environment.

Looking for Jr. Full Stack Engineers with 1-4 years of relevantexperience (Google Cloud)

Working Location : Central

**We regret to inform that only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

• Ensure the consistent delivery of high-quality Printed Wiring Boards that meet customer specifications and industry standards by managing quality assurance processes and serving as the primary liaison for customer service accounts.
• Responsible for driving continuous improvement, resolving quality-related customer issues, and upholding compliance with regulatory and internal quality systems to enhance customer satisfaction and product reliability.

Customer Quality Liaison

• Act as the primary contact for customer quality-related inquiries and complaints
• Coordinate resolution of customer issues through root cause analysis and corrective actions

Quality Control Oversight

• Monitor inspection and testing procedures are followed
• Monitor product conformance to IPC and customer-specific standards

Documentation & Compliance

• Maintain quality records in accordance with ISO 9001 and internal QMS protocols
• Prepare and submit quality reports to customers and internal stakeholders

Process Improvement

• Identify recurring quality issues and lead initiatives to improve manufacturing pro
• Support implementation of Problem-Solving methodologies

Audit & Review

• Participate in internal and external audits
• Ensure readiness for customers and regulatory inspection

Training & Support

• Provide guidance to production teams on quality standards and procedures
• Assist in onboarding new staff with QA related training
• Support new product introduction (NPI) with quality input and validation

Requirements:

• Degree in any Engineering discipline (Quality Engineering preferred) in a manufacturing environment
• Min 2 years of experience in Quality Assurance activities/operational
• Good communication, report writing and presentation skills
• Good analytical skills with ability to work effectively
• Independent, decisive and good at problem solving
• Able to adapt in a fast-paced environment
• Preferred with knowledge of PWB manufacturing processes
• Proficiency in Microsoft Office

5 days' work week
Electronics MFG Industry
Loyang Area

Interested candidates, please forward a detailed resume and email to audris@alignrecruitment.com.sg

Align Recruitment Pte Ltd

License No: 20C0253

Attention: Pan Hong (Reg No. R2094728)

[Job ID: 1471592]

About the Role:

We are looking for a driven and personable Sales Engineer to join our growing team. In this role, you will manage the full sales cycle—from site visits to deal closure—while building lasting relationships with clients in the engineering and industrial sector. Full technical training will be provided, making this an excellent opportunity for sales professionals who are eager to learn and grow.

Responsibilities:

• Manage end-to-end sales process, including client meetings, site visits, and project follow-ups
• Provide sales support with basic technical guidance (training provided)
• Generate new business from both existing accounts and new projects/tenders
• Leverage company-provided leads to expand your pipeline
• Meet and exceed annual sales KPIs

Requirements:

• Strong interpersonal and communication skills
• Basic understanding of mechanical engineering concepts (training available)
• A “farmer” mindset—focused on nurturing long-term client relationships
• Positive, proactive working attitude
• Valid driving license required (company car provided)
• Candidates with own transport will receive a monthly allowance of $800

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Cesky Ong Zhi Rong

EA Personnel Registration Number: R24121422

EA License No.: 07C5771

Job Description

• Industry/ Organization Type: Construction
• Position Title: Technical Engineer
• Working Location: Boon Lay
• Working Hours: 5 days (Mon – Fri, 9.00am – 6.30pm)
• Salary Package: Basic salary up to $4,500 + Variable Bonus
• Duration: 2-years Contract (Convertible to Permanent)

Key Responsibilities

• Prepare technical reports, design calculations, and specifications
• Create 2D and 3D drawings as needed
• Plan and oversee engineering projects
• Conduct feasibility studies and technical assessments, including site investigations
• Carry out site inspections and investigations as required
• Coordinate and communicate with clients, authorities, architects, engineers, contractors, and suppliers to resolve design and development issues
• Conduct research and gather data for projects and Capstone initiatives
• Ensure project compliance with current codes of practice and legal requirements
• Attend training courses provided by the company

APPLY NOW!!!

• Bachelor’s degree in civil & structural engineering, or relevant discipline
• Recognised qualification by the Professional Engineers Board Singapore (PEB) preferred
• Experience in restoration, civil or structural engineering design, or project management is an advantage
• Proficient in Microsoft Office and engineering design software
• Able to perform engineering hand calculations to relevant codes (BS/EC)
• Experience with CAD or BIM is preferred
• Willing to travel as required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #65005 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Brief Summary:
Join our dynamic team as a Presales Engineer, where you will collaborate with sales to craft tailored cloud and enterprise IT solutions that meet client needs and drive success.

Responsibilities:

• Collaborate with the sales team to identify customer requirements and create scalable, cost-effective solutions.

• Design and propose comprehensive solutions across cloud, infrastructure, and security areas.

• Conduct engaging technical presentations, product demonstrations, and proof-of-concept sessions for clients.

• Develop detailed technical proposals, including architecture diagrams, written solutions, and cost estimates.

• Coordinate with vendors, distributors, and internal teams for solution validation and pricing.

• Assist with responses to RFPs/RFIs, Statements of Work (SOW), and relevant implementation documentation.

• Ensure solution feasibility in partnership with delivery and engineering teams.

• Stay informed on the latest cloud technologies, market trends, and competitor offerings.

• Utilize tools to enhance proposal efficiency and quality.

• Participate in knowledge sharing, certifications, and technical training initiatives.

Requirements:

• Relevant education in a technical field.

• Experience in presales, solutions engineering, or technical consulting within cloud or IT services.

• Strong understanding of cloud platforms (experience with AWS preferred; familiarity with Azure or GCP is advantageous).

• Proven ability to convert business needs into effective technical solutions.

• Experience in proposal writing, costing, and solution design.

• Excellent communication and presentation skills.

• Capacity to thrive in a fast-paced, sales-oriented environment.

• Preferred: AWS certifications (e.g., Solutions Architect, Cloud Operations).

• Experience with managed service providers, cloud migration, or managed services is beneficial.

• Exposure to security, monitoring, or observability solutions is a plus.

Interested candidate who wish to apply for the advertised position, please click “Apply”. We regret that only shortlisted candidates will be notified 

EA License No.: 01C4394 (PERSOL Singapore Pte Ltd) 

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy. 

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 

• Demonstrates the ability in applying AI tools to enhance workflows, improve efficiency, and support data-informed decision across team and projects

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

Join ASM’s Advanced Packaging team and lead the design and development of next-generation semiconductor process equipment. In this role, you will shape system architecture, drive automation strategies, and collaborate across functions to deliver innovative solutions. Your expertise will ensure projects meet the highest standards of safety, quality, and performance.

What you will be working on

• Lead design and development of semiconductor vacuum systems, including equipment selection, process controls, and automation integration.
• Develop and implement automation strategies using PLCs, SCADA, and related tools to optimize efficiency.
• Manage project timelines, budgets, and resources while ensuring compliance with safety and quality standards.
• Collaborate with cross-functional teams in manufacturing, operations, and quality to align on goals and deliverables.
• Provide technical support and troubleshooting for equipment and automation systems, driving root cause analysis and resolution.
• Own BOM release and maintenance, ensuring accurate documentation and reporting for stakeholders.
• Drive continuous improvement initiatives and stay current with industry trends and emerging technologies.
• Apply engineering principles and research data to create designs for semiconductor systems and products.
• Perform engineering calculations for structural, thermal, and fluid dynamics challenges.
• Create and revise CAD models and detailed drawings using Creo Parametric for components and assemblies.
• Prepare comprehensive design documentation for manufacturing and testing of prototypes and production products.

What we are looking for

• Bachelor's, Master’s or PhD in Mechanical Engineering or related field.
• Minimum 8 years of experience in semiconductor equipment design, development, and automation.
• Expertise in complex mechanical systems such as reactors, vacuum chambers, gas delivery systems, pneumatics, and cooling circuits.
• Strong analytical and problem-solving skills with ability to lead innovative design concepts.
• Experience with PLC programming and revision control tools such as Git.
• Ability to work independently and collaboratively in a team environment.

What sets you apart

• Experience with semiconductor capital equipment and metal deposition products.
• Knowledge of CE, NFPA, Semi S2-95, and other relevant standards for semiconductor manufacturing equipment.
• Familiarity with materials including metals, plastics, coatings, and finishes.
• Proficiency in Microsoft applications, CREO, and AutoCAD.
• Knowledge of ASME Y14.5 and/or ISO 1101:2017 geometric dimensioning and tolerancing.
• Strong communication skills to present design concepts effectively to peers and management.
• Ability to manage multiple priorities and meet aggressive deadlines while maintaining quality standards.

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

Job Responsibilities:

• Plan, execute, monitor, and control all technical aspects of projects.
• Lead or contribute to new system/network infrastructure setups or upgrades.
• Support operational systems in line with contractual Service Level Agreements (SLAs).
• Conduct routine preventive maintenance and manage operational activities efficiently.
• Prepare comprehensive project documentation and reports.
• Troubleshoot and resolve technical issues promptly.

Requirements:

• Strong knowledge of Windows Server OS and Linux OS; experience in virtualized environments is a plus.
• Hands-on experience with virtualization, hypervisors, and the Nutanix platform is an advantage.
• Understanding of VPNs and firewall appliances is beneficial.
• Familiarity with network switches and routers is preferred.
• Excellent written and verbal communication skills to articulate technical concepts to both technical and non-technical stakeholders.
• Proactive, dynamic, and analytical with strong conceptual thinking abilities.
• Able to work independently and collaboratively, with strong interpersonal skills.

Work Location: North / Central

Please email a copy of your detailed resume to kayla@talentsis.com.sg for immediate processing.

Only shortlisted candidates will be notified.

• Perform first article evaluation (FAE/FAI) and on new parts/products that are newly manufactured.
• Conduct shipping judgement meeting for first-time manufactured and shipped-out products.
• Handle quality claims from customers through corrective action request (CAR/NCR): evaluate, verify and disseminate information to respective departments.
• Manage claims to ensure root causes are analyzed and effective corrective/preventive action are being taken.
• Ensure prompt follow-up and replies on claims.
• Revise department‘s work standard according to job-flow changes.
• Conducts process audits according to schedule.
• Assist production lines on solving quality matters; discuss and feedback on any improvement.
• Provide engineering support and advice to other members.
• Coordinate monthly quality meeting.
• Supervise subordinate.
• Adhoc job duties as assigned.

Requirements:

• Degree in Mechanical/Mechatronics Engineering
• Prefer 2-3 years of relevant experience
• Entry level applicants with the correct aptitude will also be considered.

Bedok, East Area

Manufacturing Industry

5 days work week

Interested candidates, please forward a detailed resume and email to audris@alignrecruitment.com.sg

Align Recruitment Pte Ltd

License No: 20C0253

Attention: Pan Hong (Reg No. R2094728)