Total 2,229 Senior Executive process engineer job vacancies

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Product Engineering Department diverse team of talent.

What you will be working on:

• Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.
• Identify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.
• Technical interface with Business Lines/customers
• Driver for yield improvement
• Resolve product yield, quality and reliability issues
• Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.
• Work with Customers/Mother Fab on the DfM related issue.
• Conduct product yield analyses to identify root cause of wafer sort and final test failures
• Set up fault diagnostic capabilities for yield improvement
• Work with Business line/customers on product low yield disposition
• Perform electrical and physical failure analysis to isolate fail location
• Drive the yield improvement task force

More about you:

• Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics
• 2 – 8 years product and/or test engineering, failure analysis or process-integration experience
• Experience in Fab process, yield engineering or design will be an added advantage
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical & problem-solving skills
• Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• To report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• To assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• To prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• To liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
• To attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule.
• To establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Any other duties that may be assigned from time to time.

Requirements

• Degree in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Good Time management and organization skills;
• Good interpersonal and communication skill;
• Able to multitask;
• Able to work under fast paced environment;
• Working at Changi Airport site office.

We are a specialist engineering company, focused on the healthcare sector. We would like to invite experienced project/site engineers to join our team and grow with us. The role involves working on large-scale new builds as well and A&A projects.

Responsibilities:

• Coordinate and oversee assigned project activities to ensure works are completed in accordance with project requirements, schedule and quality standards.
• Coordinate with clients, consultants, main contractors, subcontractors and suppliers on all project-related matters.
• Assist the Project Manager in planning, execution, monitoring and reporting of project progress.
• Review specifications, drawings and project requirements to ensure compliance and constructability.
• Prepare progress reports, technical submissions, method statements and project documentation.
• Lead site coordination activities and resolve technical, commercial and operational issues arising during project execution.
• Monitor project schedule, manpower deployment, procurement status and material deliveries.
• Review and manage shop drawings, BIM models, coordination drawings and as-built documentation.
• Conduct site inspections and ensure works are carried out in accordance with approved drawings, specifications and regulatory requirements.
• Plan and coordinate testing, commissioning, inspections and handover activities.
• Identify project risks and propose mitigation measures to minimise delays, cost overruns and quality issues.
• Mentor and guide Project Engineers, BIM personnel and site supervisors.
• Support cost control initiatives including variation claims, subcontractor management and progress billing documentation.
• Ensure compliance with workplace safety, quality and environmental requirements.
• Act as Project Manager’s representative during meetings and site activities when required.
• Assist the Project Managers and project team with other tasks

Requirements:

• Diploma, Advanced Diploma or Degree in Mechanical Engineering, Building Services Engineering, Construction Engineering, M&E Engineering or related discipline.
• 5 years of relevant experience in construction project management, preferably in M&E, healthcare, pharmaceutical, laboratory or specialty gas projects.
• Experience managing projects from design coordination through testing and commissioning.
• Strong understanding of M&E systems, construction methodologies and site coordination.
• Ability to interpret technical drawings, specifications and construction documents.
• Good communication and stakeholder management skills.
• Self-motivated, organised and able to work independently.

Job Description

•Maintain & support day to day manufacturing activities in a clean room environment.
•Work with Engineer and Maintenance to perform real time problem analysis on equipment failures, alarms and SPC violations.
•Implement corrective/preventive actions to resolve line issues.
•Follow up PM/CM qualification to ensure equipment operate within specification and up to manufacturing in shortest time.
•Response to equipment alarms in real time and implement actions to prevent re-occurrence.
•Response to lots on hold & disposition in real time and implement actions to prevent re-occurrence.
•Support in setting up new tools, process robustness and cost saving activities.

Required Qualifications

•A Bachelor’s Degree in, Electronics and Data, Chemical, Electrical Power Engineering, etc.   
•Ability to learn new concept and have good analytical skills
•Ability to work in a fast pace environment and able to multi-task
•Self-driven and independent with an inquisitive mind
•Able to document projects and create workspace for continuity and improvement

Key Responsibilities

• Provide Level 2/3 support for network infrastructure across data centers, remote branches, and overseas locations.
• Install, configure, and troubleshoot Cisco routers, switches (Nexus, 2960, 3750), and firewalls (Checkpoint, Juniper).
• Manage and support routing protocols including RIP, EIGRP, OSPF, BGP, and HSRP.
• Perform network health checks, DR drills, and ISDN testing for business continuity.
• Coordinate with vendors for SSOE deployments, hardware replacements, and RMA processes.
• Monitor and maintain WAN links using tools like SolarWinds, NetBrain, Riverbed, Algosec, and IBM ISM Service Desk.
• Support and troubleshoot VPNs, VLANs, and public cloud connectivity.
• Generate and maintain documentation for network changes, incident reports, and monthly performance metrics.
• Collaborate with cross-functional teams to resolve network-related issues and implement infrastructure upgrades.
• Ensure compliance with SLA and IT security policies.

Technical Skills & Tools:

• Networking: Cisco (CCNP certified), Nexus, RIP, EIGRP, OSPF, BGP, HSRP, STP, VLAN, VPN
• Firewalls: Checkpoint, Juniper
• Servers: Windows Server 2008/2003, Active Directory, FTP, DNS, DHCP, Backup Server
• Monitoring & Ticketing Tools: SolarWinds, NetBrain, Riverbed, IBM ISM, Ichamp, JIRA, CA Spectrum
• Others: Lotus Notes, Blackberry configuration, SSL VPN, Symantec Endpoint Antivirus

Required Skills & Experience:

·      Bachelor Degree in relevant field (e.g.,Computer Science, Information Technology, Engineering).

·      10+ years of experience

·      Willingness to participate in 24x7 supportrotations and on-site activities.

·      Excellent communication and documentationabilities.

·      Strong analytical and troubleshooting skills.

EA License No.: 96C4864

Reg No.: R25128798 HUANG QIMENG

Test Strategy & Development

• Develop cost-effective and high-efficiency test solutions for GaN and Silicon device families.
• Create, debug, and release test programs on discrete testers and mixed signal ATE platforms. Lead the transition of legacy platforms to new technology nodes.

Hardware Design & Requirements

• Lead the design reviews and acceptance of high-performance test interface hardware provided by external vendors.
• Design test hardware including load boards, probe heads, and sockets.
• Define test hardware requirements based on device specifications and characterization data

Execution & Sustaining

• Support New Product Introduction (NPI) through validation, release, and yield ramp activities.
• Provide sustaining support for production products and test platforms.
• Lead platform conversions and drive efficiency improvements across multiple ATE systems.

Technical Expertise

• Apply knowledge of wide bandgap semiconductors, power devices, and analog measurement techniques.
• Perform high-voltage and high-current testing safely and efficiently.
• Use lab tools such as oscilloscopes, DMMs, spectrum analyzers, and ATE debugging utilities.

Cross-functional Collaboration

• Partner with design, product, reliability, test, and operations teams to ensure smooth project execution.
• Organize technical data and present findings for engineering and management teams

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align electrical design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with contractors to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP

Requirements:

• Bachelor’s degree or Diploma in Electrical Engineering or related disciplines
• At least 5 to 8 years of relevant experience as QS
• Good knowledge of M&E specifications & requirements
• Candidate with more than 8 years of relevant experience will be considered for Senior position

COMPANY DESCRIPTION

YTL PowerSeraya Pte. Limited, a wholly owned subsidiary of YTL Power International Berhad, is in the business of producing, wholesaling, trading and retailing of energy; with a primary focus on electricity. As an established player in Singapore's energy sector, it supplies the country's energy needs through its multi-utilities platform. With a licensed generation capacity of 3,100 MW*, it is one of Singapore's largest electricity generators.

The YTL PowerSeraya Group has three subsidiaries: the retail arm under the Geneco brand provides electricity price plans and energy solutions to homes and businesses, PetroSeraya is the fuel management arm of the Group, and Taser Power which operates Taser Power Plant.

Besides being a Plaque of Commendation (GOLD) awardee at the National Trade Union Congress's May Day Awards 2023, YTL PowerSeraya has adopted three Tripartite Standards under the Tripartite Alliance for Fair and Progressive Employment Practices, and has committed to be a fair and progressive employer. To find out more about the organisation, please visit ytlpowerseraya.com.

*As at 30 Oct 2024, our registered generating capacity with EMA is 2,467.7 MW.

RESPONSIBILITIES

As part of the Mechanical Maintenance team, you will contribute to the effective maintenance of plant and equipment, ensuring high reliability and availability while meeting statutory, regulatory, and safety requirements.

Key Responsibilities

• Plan, review, and execute preventive, corrective, and outage maintenance for major Combined Cycle Power Plant (CCPP) equipment, including Gas Turbines, Steam Turbines, Generators, HRSG, and plant auxiliaries.
• Support troubleshooting activities such as vibration analysis, borescope inspections, and root cause analysis, and recommend corrective and preventive actions for mechanical failures.
• Plan, manage, and optimise minor and major overhauls, including scope development, contractor supervision, QA/QC, and safety compliance.
• Conduct functional tests on mechanical systems, analyse failures, and implement corrective actions to prevent recurrence.
• Evaluate and implement plant improvement initiatives to enhance reliability, availability, and overall plant performance.
• Supervise maintenance contract works and develop work procedures for maintenance activities.
• Prepare technical specifications for equipment, spare parts, and services, and support procurement activities to meet maintenance requirements.
• Work closely with technical officers and technicians to ensure high standards of workmanship and safety during daily operations and shutdown maintenance.

• Degree in Mechanical Engineering or equivalent, recognised by the Professional Engineers Board.
• Experience in a Combined Cycle Power Plant or Oil & Gas environment, with hands-on exposure to Gas Turbines, Steam Turbines, Generators, HRSG, and mechanical auxiliary systems, including contractor management, outage planning, and preparation of technical reports, will be an advantage. Fresh graduates are also encouraged to apply.
• Sound technical knowledge of mechanical systems, maintenance strategies, outage practices, and regulatory requirements.
• Self-motivated team player with strong analytical, planning, and problem-solving skills.
• Strong safety mindset with good understanding of Permit-to-Work (PTW), risk assessments, and statutory safety requirements.

Responsibilities

• To review and manage all design documentation for ACMV, BMS, DfMA, Ductless, ESCS system and etc.
• Able to understand construction shop drawing.
• Familiar with calculation of heating/cooling load, equipment sizing (MV& AHU), Electrical load and etc.
• To develop ICDD documentation
• To monitor and verify installation of ACMV Equipment, chillers, air handling units, MV system, packaged units, VRV system, and split units.
• To study and assess drawings, plans, specifications, and other documents relating to the construction project.
• To review, assess and evaluate the execution of the project on a regular basis.
• To troubleshoot and resolve complex issues arising in a project.
• To carry out site visits throughout the project in order to record information on the progress of the project against the agreed programme.
• To verify material requisition and taking-off quantities/site measurement.
• To attend to site tests and inspections.
• To ensure quality standards and all health & safety requirements are adhered to.
• To maintain, manage, and document all project reports and statements.
• To perform other related duties, as assigned Job Requirements.

Requirements:

• Diploma / Degree in Mechanical Engineering, or Diploma in similar fields.
• Must have design and installation experience in ACMV, BMS, DfMA, Ductless Jet Fan, ESCS system etc.
• Experience with ICDD (Interface Control & Data Document) is preferred.
• Must have direct work experience in the construction industry.
• Good knowledge of codes, standards, and procedures.
• Proficient in MS Office, AutoCAD, Revit etc.
• A team player that is self-motivated, proactive, results-oriented with a proven track record in the construction industry.
• Holds himself/herself accountable for assigned scope.

• Well Established Company
• Excellent Welfare and Benefits + Career progression
• Basic $ 4500 to $ 6000 + AWS + VB
• Working location: North-East
• Working Hours: Monday to Friday (8:30am to 5:30pm)
• Must have C / C++

Job Responsibilities:

• Responsible for software prototyping, requirement analysis, design, development, test, system integration and site integration for developed applications
• Design, configuration, test, integration and maintenance of Automation & SCADA Systems and applications
• Provide technical, deployment and commissioning support to Project Teams and Customers
• Maintain and enhance software applications in both functionality
• Provide software support via on-site troubleshooting, testing and tuning of applications, software, network, protocols and communication issues

Requirements:

• Diploma/Degree in Electronics Engineering or Computer Science
• Experienced with two or more languages such as C/C++, C#, Python
• Experienced in at least one scripting language sch as Python, bash, ksh, bat, ps
• Experience in real tome/embedded system
• At least 2-3 years experience in C/C++ and at least 1 full SDLC
• Knowledge/Experience with SCADA protocols, RDBMS, REST, MQTT are desired

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

· Design and coordinate assigned Civil and Structural projects.

· Perform structural analysis and design in building or on anystructures as required by the project.

· Liaise with clients & consultants to meet C&Srequirements.

· Manage and Coordinate to ensure civil and structuralrequirements meet project tender, submission and construction schedule.

Requirements:

· Good degree in Civil / Structural Engineering from a recognizedUniversity

· Preferably 4-5 years working experience in Civil &Structural Consultancy Firm

· Conversant with Building Control Acts & Regulations,Singapore Codes of Practice, Eurocodes and structural programs such as STAAD,TEKLA, ETABS, RAPT, etc

. We regret that this position is open to Singapore Citizens only due to hiring requirements

Leadtop Technology Pte Ltd is a chip design company based in Singapore. The Company has strong R&D capabilities and the core technical team members all have numerous years of experience in the semiconductor industry. We have rich industry experience and deep practical accumulation in IC design and business management.

Job Description:

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3.Researches the physical design methodology of advanced process nodes, and improvise the automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is preferred.

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be a plus.

4. Strong communication ability, good confidence and self-motivated, good teamwork spirit.

5. Salary is negotiable for excellent candidates.

ESSENTIAL DUTIES AND RESPONSIBILITIES 

In this position, you will work in the Material Engineering team within the Packaging R&D organization who owns and deploys best-in-class material engineering solutions to the top-edge product and technology development across advanced semiconductor packaging, flash memory product and host levels. Your essential duties and responsibilities include:

• Drive advancement in packaging materials by addressing material-related design and process challenges. Develop solutions to support next-generation package requirements, including smaller form factors, thinner die, higher interconnect density, increased power, and enhanced reliability.
• Lead the evaluation, development, and qualification of advanced packaging materials for both product development and high-volume manufacturing. Ensure compliance with industry standards and sustain high material quality to enable reliable, high-yield, and cost-efficient manufacturing.
• Responsible for material characterization, lab testing, and design of experiments (DOE) to simulate manufacturing processes and use-condition failure. Analyze thermal, mechanical, and environmental performance to ensure materials meet reliability and performance targets.
• This position will interface with package and product design (in particular, thermal and mechanical), reliability, failure analysis, assembly R&D, and process teams to define material requirements and solutions. Collaborate with suppliers to develop, optimize, and qualify materials for successful production integration.

Job Responsibilities

- Responsible for the design, development, testing, and maintenance of enterprise-level backend systems, reporting modules, and data platforms

- Perform system analysis, technical design, and feature implementation based on business requirements

- Responsible for Java backend service development and database business logic implementation

- Responsible for Oracle / OceanBase database development and optimization, including:

• Stored Procedures
• Packages
• Triggers
• Functions

- Optimize SQL queries and database performance to improve overall system stability and response efficiency

- Participate in RESTful API development and third-party system integration

- Use MongoDB, ClickHouse, and related technologies to support big data queries and analysis

- Responsible for system troubleshooting, performance tuning, and production environment support

- Configure, build, and test system-related technical components

- Collaborate with product, frontend, and other technical teams to ensure smooth project delivery

- Participate in relevant technical research and system optimization work according to project needs

Job Requirements

Technical Skills

- Proficient in Java SE / Java EE and object-oriented programming (OOP)

- Familiar with enterprise-level development using Spring Boot / Spring Framework

- Familiar with MVC architecture design

- Experience with MyBatis / iBatis development

- Solid experience in SQL performance optimization

- Proficient in Oracle database optimization and stored procedure development

- Experience in multithreaded development and system performance tuning

- Familiar with RESTful API design and system integration patterns

- Familiar with version control tools such as SVN / Git

- Experience with MongoDB, ClickHouse, or big data platforms is preferred

- Familiarity with Linux environment operations and deployment is preferred

- Familiarity with AI-assisted development tools such as Cursor, Claude Code, GitHub Copilot, etc. is preferred

- Experience developing systems for finance, government, or large enterprises

- Experience with microservices architecture development

- Experience with Docker, CI/CD, or cloud deployment

- Experience with high-performance data processing or real-time data analysis

- Experience in system architecture design is preferred

- Experience leading development teams or projects is a plus

Personal Attributes

- Good analytical and problem-solving skills

- Careful and detail-oriented, with a strong focus on code quality and system stability

- Able to handle high-concurrency and large-scale data scenarios

- Good teamwork and communication skills

- Proactive, responsible, and highly accountable

Qualifications

- Bachelor’s degree or above in Computer Science, Software Engineering, Information Technology, or a related field

- At least 4–5 years of Java backend development experience

- Experience developing large-scale enterprise systems or high-concurrency systems is preferred

Language Requirements

- Good English communication skills

- Fluency in spoken and written Chinese is essential, as the role requires frequent liaison with Chinese-speaking counterparts and stakeholders, and the preparation, review and handling of Chinese-language work materials.


岗位职责

- 负责企业级后台系统、报表模块及数据平台的设计、开发、测试与维护

- 根据业务需求进行系统分析、技术设计及功能实现

- 负责 Java 后端服务开发及数据库业务逻辑实现

- 负责 Oracle / OceanBase 数据库开发与优化，包括:

• Stored Procedure
• Package
• Trigger
• Function

- 优化 SQL 查询及数据库性能，提升系统整体稳定性与响应效率

- 参与 RESTful API 开发及第三方系统整合

- 使用 MongoDB、ClickHouse 及相关技术支持大数据查询与分析

- 负责系统问题排查、性能调优及生产环境支持

- 配置、构建及测试系统相关技术组件

- 与产品、前端及其他技术团队协作，确保项目顺利交付

- 根据项目需求参与相关技术研究与系统优化工作

职位要求:

技术能力

- 精通 Java SE / Java EE 及面向对象编程（OOP）

- 熟悉 Spring Boot / Spring Framework 企业级开发

- 熟悉 MVC 架构设计

- 具备 MyBatis / iBatis 开发经验

- 扎实的 SQL 性能优化经验

- 精通 Oracle 数据库优化及存储过程开发

- 具备多线程开发及系统性能调优经验

- 熟悉 RESTful API 设计与系统整合模式

- 熟悉 SVN / Git 等版本控制工具

- 有 MongoDB、ClickHouse 或大数据平台经验者优先

- 熟悉 Linux 环境操作及部署者优先

- 熟悉 AI 辅助开发工具（如 Cursor、Claude Code、GitHub Copilot 等）者优先

加分项

- 有金融、政府或大型企业系统开发经验

- 有微服务架构（Microservices）开发经验

- 有 Docker、CI/CD 或云端部署经验

- 有高性能数据处理或实时数据分析经验

- 有系统架构设计经验者优先

- 有带领开发团队或项目经验者更佳

个人能力

- 具备良好的分析与问题解决能力

- 工作认真细致，注重代码质量与系统稳定性

- 能够处理高并发及大规模数据场景

- 具备良好的团队合作与沟通能力

- 工作积极主动，责任感强

任职资格

- 计算机科学、软件工程、信息技术或相关专业本科及以上学历

- 至少 4–5 年 Java 后端开发经验

- 具备大型企业系统或高并发系统开发经验者优先

语言要求

- 具备良好的英语沟通能力

- 能使用普通话沟通者优先，以便与华语客户及合作伙伴进行日常交流


Lumina Advisory & Global Search Pte Ltd | 25C3262

Joyce Yeo | R1218489

THE ROLE: 

As a Senior Engineer, you will collaborate with various Product Development Groups. This individual serves as a critical technical point of contact to the business, design, platform validation and product engineering teams. We have competitive benefit packages and an award-winning culture. Join us!  

THE PERSON: 

A successful candidate is one who can drive technical decisions independently, has accountability for accuracy, reliability and completeness of assignment results critical to the project’s success. This role allows the opportunity to influence technical decisions that have a significant impact on multiple products or the product line.  

KEY RESPONSIBILITIES: 

• Ensures high uptime, ensures preventive maintenance (PM) execution, and seamless vendor coordination for resolving tools hardware and software issues. Primary advanced toolset coverage: Focused Ion Beam, Reactive Ion etchers, Nano‑probers, Scanning electron microscopes and Transmission electron microscopes 
• The role partners closely with equipment owners, lab operations, EHS, and external OEMs to sustain capability, drive MTBF/MTTR improvements, and enable rapid turns on high‑priority cases.
• Design new lab space with strict environmental control involving vibration, EMI and acoustics.
• Lead structured troubleshooting and root‑cause eradication (5‑Why, Ishikawa, FMEA); convert escapes into standard work and documented fixes
• Serve as single point of contact for OEMs and third‑party service providers; coordinate field service, escalations, and remote diagnostics
• Manage service contracts, PM bundles, and time‑and‑materials events; negotiate scope vs. cost; track vendor KPI adherence and corrective actions
• Enforce LOTO, ESD, chemical/gas handling, UHV safety, and radiation/beam compliance as applicable
• Partner with FA engineers on readiness gates for new methods/fixtures; support tool installation, lab moves, and capability upgrades
• Provide on‑call/shift coverage as needed for bring‑up, critical debug, and factory‑stop events

PREFERRED EXPERIENCE: 

• Hands on maintenance experience with complex capital equipment involving vacuum systems, motion/servo control, pneumatics, high voltage, and embedded SW/FW
• Demonstrated ability in systematic troubleshooting, reading electrical/pneumatic schematics, and using diagnostic tools (oscilloscope, DMM, leak detector, RGA)
• Effective communication with vendors and cross site teams; ability to coordinate multi party interventions under time pressure
• Experience in failure analysis tools, including alignments, stage/probe calibration, column health, and detector
• Knowledge of UHV, turbo/cryogenic pumps, gas handling, plasma sources, beam columns, and vibration/thermal isolation
• Lab‑based role with occasional off‑shift or weekend coverage during critical events and planned PMs
• Some travel for OEM training, factory repair, or acceptance tests may be required

ACADEMIC CREDENTIALS: 

• Bachelor’s degree in Mechatronics Engineering (or Mechanical/Electrical with mechatronics focus)