Total 2,779 Senior Executive network engineer job vacancies

THE ROLE:

DFT engineer will lead strong engineering team on Scan, MBIST, iJTAG test development of latest AMD products. The IPs range from complex processors, AI computation blocks, to state-of-the-art controller IPs which provide automotive, data center, machine learning and high-speed communication solutions. You will work closely with designers to make sure DFT structures are correctly implemented, with test engineers to make sure ATE test programs can be generated from the DFT (ATPG, MBIST) tools, with product engineers to make sure scan/MBIST production test can run seamlessly and stable, and with yield engineers to debug and root-cause failures/defects. You will get the opportunity to expand technical knowledge beyond DFT into embedded processor firmware, complex chip simulation, RTL implementation for ASIC & FPGA and deep silicon debug works all the way to high-volume production requirement. This is the role to oversee complete silicon cycle from design to production phases.

THE PERSON:

We are looking for candidates that can communicate complex engineering subjects effectively to cross functioning technical teams and upper management. Strong DFT and leadership skills will be put to good use. Successful Member of Technical Staff DFT engineer will interact with many external teams and must confidently represent his/her organization.

KEY RESPONSIBILITIES:

• Manage DFT engineers resolving technical challenges and meeting product schedule
• The role is in AMD global quality and operation organization driving best manufacturing test solution through pre and post silicon activities
• Work closely with design teams and make sure DFT structures are correctly implemented.
• Responsible for developing, implementing and verifying DFT schemes on hard-IPs in AMD ASIC and FPGA products.
• Responsible for developing and implementing techniques to test digital logic, using Scan Compression, Stuck-at, Transition and Path-Delay fault models
• Responsible for testing other parts of the design, including memory, mixed-signal, I/Os, custom LBISTs & MBISTs, IEEE1149.1 JTAG and IEEE1687 IJTAG
• Responsible to develop Firmware driven cost-effective test strategies/methodologies with built-in diagnosis capability to enable efficient debugging and fault isolation on bench/ATE
• Collaborate closely with the New Product Introduction and Test/Product teams to ensure timely delivery of robust test patterns, and manage debugging of pattern issues on bench/ATE to root cause the problem
• Assist in Diagnosis and Yield enhancement through product lifecycle
• Develop an adaptive and cohesive team to take up any challenging tasks entrusted by management

PREFERRED EXPERIENCE:

• Experience DFT engineering experience through DFT pre and post silicon cycles
• Experience in creating and implementing complex chip-level DFT architecture
• Experience in DFT implementation including Scan and Scan Compression at IP and SoC level
• Experience with DFT tools, ATPG (Stuck-At, At-Speed, Path-Delay) and scan compression.
• Strong MBIST knowledge
• Knowledge of Tessent Streaming Scan Network SSN and hand-on experience is a big plus
• Proficient in logic design using Verilog and experience in synthesis and STA
• Experience in developing test benches and simulation in RTL/GATE/SDF environments
• Knowledge of FPGA synthesis and design flow is a plus
• Experience with post-silicon debug and bench equipment (e.g., oscilloscope and logic analyser)
• Good communication skills, works well in a group environment that spans across continents
• Comfortable in Linux environment and writing/using scripting languages such as Perl, Tcl, etc

ACADEMIC CREDENTIALS:

• MS or Ph.D. in Electrical/Electronic/Computer Engineering

Test Strategy & Development

• Develop cost-effective and high-efficiency test solutions for GaN and Silicon device families.
• Create, debug, and release test programs on discrete testers and mixed signal ATE platforms. Lead the transition of legacy platforms to new technology nodes.

Hardware Design & Requirements

• Lead the design reviews and acceptance of high-performance test interface hardware provided by external vendors.
• Design test hardware including load boards, probe heads, and sockets.
• Define test hardware requirements based on device specifications and characterization data

Execution & Sustaining

• Support New Product Introduction (NPI) through validation, release, and yield ramp activities.
• Provide sustaining support for production products and test platforms.
• Lead platform conversions and drive efficiency improvements across multiple ATE systems.

Technical Expertise

• Apply knowledge of wide bandgap semiconductors, power devices, and analog measurement techniques.
• Perform high-voltage and high-current testing safely and efficiently.
• Use lab tools such as oscilloscopes, DMMs, spectrum analyzers, and ATE debugging utilities.

Cross-functional Collaboration

• Partner with design, product, reliability, test, and operations teams to ensure smooth project execution.
• Organize technical data and present findings for engineering and management teams

As a Senior Software Engineer on the Consumer & Business Advanced Trading team, you'll architect and deliver Coinbase's next-generation trading systems for the IntX product, working from Singapore in close collaboration with the Trading team. This team builds the fastest, most reliable crypto trading infrastructure globally. You'll lead multi-quarter, cross-organizational initiatives that define how millions of customers trade, while mentoring engineers and raising the technical bar across the organization.

What you'll do:

• Own the technical vision and architecture for mission-critical trading systems, including order management, execution engines, and reliability infrastructure.
• Drive multi-quarter projects across multiple engineering teams from design through production delivery.
• Lead system design and code review processes that elevate engineering quality and set standards for the trading stack.
• Partner with Product Management and Design to align product strategy with long-term technical bets and roadmap priorities.
• Shape the strategic direction of the trading platform by identifying high-leverage technical initiatives and driving consensus across organizational boundaries.
• Deepen engineering talent across the team by coaching engineers at various levels and developing the next generation of trading infrastructure leaders.

Required Skills and Experience:

• 5+ years of software engineering experience with demonstrated ownership of large-scale distributed systems.
• Hands-on expertise in trading systems (traditional or crypto), with direct experience building or operating order management, execution, market data, or risk management components.
• Track record of leading complex, cross-team initiatives from ambiguous problem statements through delivered outcomes, with measurable impact on product or platform reliability.
• Demonstrated ability to translate product requirements into scalable system designs and communicate technical trade-offs to non-technical stakeholders.
• Experience with performant backend languages in production trading environments.
• Utilizes generative AI responsibly, maintaining human oversight to deliver business-ready outputs and drive measurable improvements in workflow efficiency, cost, and quality.

Responsibilities :

• Support the technical team and construction team for all design matters.
• Review all technical documentation and drawings of the Project works.
• Work closely with consultant on the scope of services, design and project deliverables to enhance site efficiency and constructability.
• Manage design approval process and coordination with the clients, consultants and subcontractors in a timely manner to resolve all technical issues.
• Ensure strict compliance of the design in accordance with contractual requirements.
• Ensure the distribution of all the approved and latest drawings and other relevant documents to the relevant parties
• Prepares shopdrawings with in-house BIM team and/or subcontractors and obtains approval in advance to site installation dates
• Raises queries to Client or handles Client's clarification on technical requirements pertaining to the Project works.
• Identifies and highlight to management and project team of any potential risks or issues that will impact project performance.
• Prepares and presents design progress status and slides to management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e. Architectural, MEP, BIM, etc( on design to ensure delivery of high quality outcome.
• Support tender team and prepare technical tender documents as per specifications for bidding of civil and structural engineering projects as when assigned.
• Attends Progress Meetings, Technical Meetings, Coordination Meeting, Site Meetings, etc.

Requirements :

• PE Board Recognised Degree in Civil Engineering
• Minimum 5 years of design management experience with at least 3 year of design experience in consultant firm.
• Strong coordination and collaboration with other disciplines.
• Good interpersonal and communication skills .
• Good organization and time management skills.

Responsibilities:

• Design and review mechanical layouts for warehouse automation systems using AutoCAD
• Integrate AGV, AMR, and shuttle systems within warehouse infrastructure
• Diagnose and resolve mechanical issues in automation equipment (e.g., AGVs, conveyors, AMRs)
• Support on-site installation, commissioning, and system testing
• Collaborate with vendors and cross-functional teams to ensure timely project delivery
• Supervise small teams or subcontractors and provide technical guidance
• Travel as required for site inspections, installations, and troubleshooting

Qualifications:

• Diploma or Degree in Mechatronics, Mechanical, Electrical, or related field.
• Basic understanding of mechanical systems, electrical wiring, sensors, and actuators.
• Exposure to PLC or automation systems is an added advantage.
• Strong practical knowledge in automation and control systems, electrical schematics, system integration, and mechanical troubleshooting.
• Demonstrated experience in project leadership or small team management.
• Strong analytical thinking and decision-making abilities.
• Open to travel and site-based work when required.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

Contributes to the development of new analytics tool, software, and approaches, including the design, development, troubleshooting and debugging.

  *   Ongoing maintenance, update and support of the existing programming and analytic tools

  *   Develop, implement and maintain server and database infrastructure, hardware and software to ensure maximum tool uptime and performance.

  *   Execute end-to-end data processing workflows, ensuring data is accurately ingested, cleaned and structured across corporate systems.

  *   Manage and monitor data flows between current and future infrastructure components to maintain data integrity and consistency.

  *   Analyze processed data to uncover trends, patterns and operational performance metrics using statistical techniques.

  *   Exercises significant independent judgment to determine best method for accomplishing work and achieving objectives

  *   Leads and /or provides expertise to functional project teams and may participate in cross-functional initiatives.

The requirements:

  *   5 years of hands-on experience in data engineering and analytics

  *   Strong skills in statistical tools and programming languages such as Python, R, etc.

  *   Experience with data analysis / visualization tools and software like Power BI, Looker, Databricks etc.

  *   Proficiency in SQL for data extraction and manipulation.

  *   Attention to detail and a commitment to data accuracy.

  *   Proactive approach to identifying issues and providing solutions.

  *   Strong analytical and problem-solving skills. Ability to analyze complex datasets and translate data into actionable insights.

  *   Ability to present complex information in an understandable and compelling manner.

  *   Excellent written and verbal communication skills

  *   Ability to work independently and collaboratively as part of team

We are seeking a highly skilled and experienced Senior Design Engineer to join our team, a leading firm specialising in the design and manufacture of waste management and municipal equipment. This role offers the opportunity to work on innovative projects that make a real impact on communities and the environment.

DUTIES & RESPONSIBILITIES

Design and Development

• Lead the design and development of waste management and municipal equipment, ensuring all products meet safety, quality, and performance standards.

• Utilize advanced CAD software to create detailed 2D, 3D models and technical drawings.

• Conduct feasibility studies and risk assessments for new designs and modifications.

• Construct and maintain accurate BOMs and revision control systems, building a standard parts directory, material library and producing company engineering standards.

Project Management

• Oversee projects from concept through to production, managing timelines, budgets, and resources.

• Coordinate with cross-functional teams including manufacturing, procurement, and quality assurance to ensure seamless project execution.

• Provide technical leadership and mentoring to junior engineers and design team members.

Innovation and Improvement

• Drive innovation by researching and integrating new technologies and materials to enhance product performance and sustainability.

• Identify opportunities for process improvements and cost reductions while maintaining product integrity.

Compliance and Standards

• Ensure all designs comply with relevant industry standards, regulations, and safety requirements.

• Prepare and review technical documentation and reports, including compliance certifications and testing protocols.

Client and Stakeholder Engagement:

• Liaise with clients, suppliers, and stakeholders to understand requirements and provide technical expertise and support.

• Present design concepts and project updates to clients and senior management.

REQUIREMENTS

• Degree in Mechanical Engineering, Industrial Design, Mechatronic or a related field. Professional engineering qualifications (e.g., Chartered Engineer) preferred.

• Minimum of 5 years’ experience in design engineering, with a proven track record in waste management or municipal equipment. Proficient in mechanical structural calculation.

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD), and knowledge of engineering principles related to mechanical design and fabrication.

• Strong project management skills with experience in leading cross-functional teams and managing complex projects. LTA submission, compliance with safety regulations. Engineering support and correspondence to vehicular projects.

• Excellent problem-solving abilities and a keen eye for detail.

• Strong verbal and written communication skills, with the ability to present technical information clearly and effectively.

• Ability to work in a fast-paced environment and adapt to changing priorities and requirements.

Key Responsibilities

Design & Engineering

• Lead the design and integration of fire protection systems (sprinklers, hydrants, hose reels, wet/dry risers, gas suppression, smoke control, etc.) with ACMV and M&E systems.
• Prepare detailed calculations, hydraulic analysis, schematics, and technical drawings in compliance with Singapore standards (SS CP 52, SS 575, SS 553, NFPA, FM Global).
• Ensure seamless coordination of fire protection systems with ACMV, electrical, plumbing, and structural disciplines.

Regulatory Compliance

• Ensure all designs and installations comply with Singapore Civil Defence Force (SCDF), Fire Safety Act, BCA, and relevant codes of practice.
• Prepare, review, and submit fire safety plans, calculations, and authority submissions.
• Liaise with Qualified Persons (QPs), Registered Inspectors (RIs), and SCDF officers to secure approvals and clearances.

Project Management

• Oversee fire protection works from concept to completion, including design, tender, installation, testing, and commissioning.
• Review shop drawings, material submissions, and method statements from subcontractors/vendors.
• Conduct risk assessments, resolve site issues, and ensure timely delivery of systems within budget and schedule.

Testing & Commissioning

• Lead inspection, functional testing, and commissioning of fire protection systems in coordination with ACMV systems (e.g., pressurisation fans, smoke extraction).
• Ensure proper documentation, handover, and compliance with Fire Safety Certificate (FSC) requirements.

Leadership & Mentorship

• Guide junior engineers and draftsmen in technical design, authority submissions, and project execution.
• Provide training and knowledge-sharing sessions on fire codes, compliance, and best practices.

Requirements

Education

• Bachelor’s Degree in Mechanical Engineering, Fire Safety Engineering, or related discipline.
• Professional Engineer (PE) certification or equivalent (advantage)

Experience

• Minimum 5–8 years of relevant experience in fire protection engineering within ACMV/M&E or construction industry in Singapore.
• Proven track record in large-scale building, industrial, or infrastructure projects (LTA, BCA, commercial buildings, etc.).

Technical Skills

• Strong knowledge of local and international fire codes (SCDF, BCA, NFPA, FM Global).
• Proficiency in design software (AutoCAD, Revit/BIM, hydraulic calculation tools).
• Familiar with integration of ACMV smoke control systems, stairwell pressurisation, and fire alarm interfaces.

Soft Skills

• Strong leadership, coordination, and stakeholder management skills.
• Excellent written and verbal communication skills.
• Ability to work independently and manage multiple projects simultaneously.

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Produce tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Lead a team in project planning, implementation and close monitoring the progress of projects.
• Project coordination including submission to local authorities and liaison during the construction stage and site inspection with qualified site supervisors (RE/RTO).
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess minimum a Bachelor Engineering (Civil) degree recognised by PE Board.
• Engineers with minimum 5 years' relevant local experience in engineering design and project management.
• Conversant with latest design codes and authority requirements (Codes of practice directives, etc.).
• Be a team player with good attitude towards quality of work and timeline.
• Able to work independently to support the Qualified Person.

At B&W Engineering, we deliver mission-critical infrastructure that underpins the digital economy. As a Senior Civil Engineer, you will play a pivotal role in the site development of data centre projects, with a strong focus on roads, drainage, and utilities infrastructure.

This is an opportunity to work on complex, high-value developments—leading civil design delivery, shaping site infrastructure, and ensuring integration with building and mission-critical systems.

ROLE RESPONSIBILITIES (Tasks)

Technical Leadership & Design (Site Infrastructure)

• Lead the design of civil and site infrastructure works including roads, stormwater drainage, and underground utilities
• Prepare and review detailed engineering calculations, drawings, and specifications
• Design earthworks, grading, pavements, and utility networks (water, sewer, power corridors)
• Ensure designs align with project requirements, local authority standards, and best practices

Project Delivery

• Manage civil engineering packages from concept through detailed design to construction support
• Coordinate with multidisciplinary teams (electrical, mechanical, structural, BIM) to ensure integrated site design
• Support authority submissions (e.g., PUB, LTA, BCA) and approvals processes
• Provide technical input during construction, site inspections, and issue resolution

Stakeholder Engagement

• Liaise with clients, contractors, and government authorities on design and delivery matters
• Participate in technical meetings and provide expert guidance on civil engineering solutions
• Support project managers in delivering outcomes aligned with client expectations

Mentorship & Team Development

• Mentor junior engineers and support capability building within the civil team
• Promote technical excellence and knowledge sharing
• Contribute to a collaborative and high-performing team culture

Innovation & Continuous Improvement

• Identify opportunities to improve design efficiency, constructability, and sustainability
• Support the adoption of digital engineering and BIM in civil design workflows
• Stay updated with evolving standards, design tools, and infrastructure trends

EDUCATION AND TRAINING REQUIREMENT

• Bachelor’s degree in Civil Engineering or related discipline
• Professional Engineer (PE) – Singapore registration or working towards (preferred)
• Registered or eligible for registration with the Professional Engineers Board (PEB)
• Familiarity with Singapore codes and authority requirements (e.g., PUB, LTA, BCA)
• Membership with Institution of Engineers Singapore (IES) or equivalent preferred

EXPERIENCE REQUIREMENTS

• Proven experience as a Senior Civil Engineer / Civil & Structural Engineer within consultancy or infrastructure projects
• Strong experience in roads, drainage, and utilities design, particularly for building site developments or industrial/data centre sites
• Related structural engineering experience would be beneficial
• Solid understanding of Singapore authority requirements and submission processes
• Experience coordinating multidisciplinary infrastructure design
• Strong stakeholder engagement and communication skills
• A proactive, solutions-driven approach with attention to detail and delivery excellence

GETTING RESULTS AND WORKING TOGETHER

The post holder will be expected to operate in line with our workplace values:

• Accountability - Everyone is accountable.
• Integrity - We are straight talking, respectful and fair.
• Simplicity - Both in our approach and solutions.
• Supportive - We are approachable, inclusive and recognise success

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

We are seeking an experienced Senior Process Engineer to join our client’s dynamic team.

Job Description (JD)| Senior Process Engineer

This role focuses on patient acquisition, conversion, and relationship management.

Role Summary:

This is a full-time, permanent role where the incumbent will play a crucial part in the design, implementation and optimization of our client’s industrial water treatment processes.

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborating with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks assigned to support project and team objectives

Requirements

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Com & Ben Packages

• Monthly Basic salary ranges from S$4k to S$7k

• Annual Leaves, Medical Leaves are as per Singapore’s statutory laws.

• Career development opportunity

• The HR Management team is very friendly and co-operative .

Please contact Recruitment Manager Leeza Shaheed (Registration ID: R1770675) at leeza@aethelra.com, info@aethelra.com, aethelraconsulting@gmail.com for further enquiries about the roles and mention the following information on your CV: Executive summary, Nationality, Language proficiencies, Total years of experience, relevant work-related experience- for how many years, availability, expected monthly basic salary, latest drawn monthly basic salary.

AethelRa Consulting Pte. Ltd. UEN: 202536338H | EA Licence No.25C3084

1 North Bridge Rd, #18-03, High Street Centre, Singapore 179094

Emails: leeza@aethelra.com| info@aethelra.com | aethelraconsulting@gmail.com

Website: https://aethelra.com

LinkedIn: https://www.linkedin.com/in/aethelra/

Senior Automation Engineer (High-Impact / Mission-Critical Systems)

We are hiring a Senior Electrical Engineer to be based at our Singapore office. This role will focus in providing technical capability in Infrastructure projects; focusing on technical aspects and project management. 

Main duties: 

• Lead Electrical multi-disciplinary/functional team in the region to deliver projects.
• Perform engineering tasks on the mechanical services from concept, BOD, 35% to 100% designs (including calculations, computer simulations, specifications etc.) for Electrical infrastructure.
• Provide technical guidance to project and design engineers and resolve any technical problems faced during design and construction stages.
• Ensure that consistent quality standards and conformance with design plans / specifications are maintained across the project and coordination with other disciplines to ensure consistency across the project.
• Support in preparing proposals and bids when needed.
• Lead project/site meeting with Client, PM and Consultants from other disciplines (internal and external) through all stages of the project.
• Understand and follow plans, procedures, workflows, systems and tools to meet specific project requirements.
• Liaise and coordinate relevant technical issues with other disciplines.
• Build cultivate and build relationships with client generally as a Doer/Seller role.
• Support site supervision and plant commissioning activities when required.

To be a successful candidate, you shall possess: 

• Degree in Electrical Engineering recognized by PEB Singapore.
• Familiarity with relevant Local Codes and international standards to ensure compliance.
• Minimum 10 years of relevant working experience.
• Ability to work independently and in a team.

Please note:  If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Jacobs. Jacobs complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of age, race, religion, language, nationality, marital status, or family responsibilities.

As a Senior Software Engineer, you will be working on:

• Partner with software engineers and other functions to understand objectives for development delivery efficiency and system resiliency, helping them articulate how specific technical capabilities and best practices will achieve key business outcomes.

• Conduct comprehensive assessments of the existing technical landscapes, workflows, and processes to identify inefficiencies, pain points, and gaps that hinder their goals.

• Collaborate with client to identify the most relevant practices (e.g., CI/CD, SRE) for using Core Engineering Products in achieving their goals, considering unique needs and industry best practices.

• Develop transition roadmaps that outline a clear path from the current state to the desired future state, including the adoption of recommended tools and processes.

• Explain complex concepts clearly to various stakeholders, providing actionable recommendations for improving workflows and addressing their challenges, and providing supporting diagrams as needed.

• Support client with proof of concept (POC) initiatives to validate solutions, offering hands-on assistance during early implementation phases to enable smooth transitions to full-scale rollouts.

• Collaborate closely with fellow Software Engineers to exchange insights, share tools and scripts, and foster a collaborative environment that supports continuous improvement and knowledge sharing.

What we are looking for:

• 6+ years in an individual contributor software engineering role.

• Experience with NodeJs with TypeScript.

• Experience with one or more of Cloud Service Providers such as AWS, Azure, or GCP.

• Experience building cron jobs and scripts to run batch jobs.

• Experience with streaming data.

• Strong track record of successful large-scale partner solution implementations, preferably in complex enterprise environments

• Exceptional communication skills with ability to bridge technical discussions between internal teams and external partners

• Experience working in highly secured and air gap systems is a plus (i.e. banking, government systems and similar)