Total 6,131 it technician job vacancies

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

• 設定並操作無心磨床，以製造符合精確規格的金屬零件。
• 監控機器性能並進行必要的調整，以確保最佳產量和品質。
• 對無心磨床進行日常維護和故障排除
• 監督部門下屬操作員的工作

福利待遇

• 員工權益
• 津貼（旅費、交通費等）
• 休閒著裝要求
• 開放文化
• 健身會員

Responsibilities:

• Perform highly diversified duties to install and maintain production machines.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance technician.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance

Perks & Benefits

• Open culture
• Personal development opportunities

Duties & Responsibilities

• Responsible to preform Preventive Maintenance works as per schedule for Production machines and Equipment.
• Carry out Maintenance activity for supporting facilities as per planning (weekly, monthly, quarterly, etc).
• Record and document of all related maintenance activities reports such as SOP, PM, Calibration report and etc.
• Assist Production Department in machine operation setting where applicable.
• Carry out routine monitoring, inspection, maintenance and repair works as assigned by superior.
• Attend and initiate troubleshooting and repair of any machinery breakdown, report immediately to the superior if face any difficulties in completing jobs.
• To carry out installation of new machine equipment.
• Monitor and supervise all work performed by outside contractors is done properly and high standard.
• Ensure the stock for spare part is sufficient.
• Carry out maintenance task as assigned by the superior and management from time to time.

Requirements

• Candidate must possess at least Certificate / Diploma in mechanical or any relevant field.
• Minimum 1 years working experience preferably in machine maintenance and facilities or equivalent.
• with more than 1 vancancy

Perks & Benefits

• Casual dress code
• Medical insurance

JOB DESCRIPTION :

1. Perform various types of testing including functional testing, API testing, and/or usability testing for assigned projects or products. 
2. Support and participate in performance testing and test automation testing activities. 
3. Perform testing activities, including test case design, test procedure preparation, test data creation, and test execution. 
4. Identify and document defects discovered during testing through Test Incident Reports 
5. Track and follow up on reported defects to ensure timely resolution, closure, or proper mitigation. 
6. Provide regular status updates and reports to the manager on testing progress, issues, risks, and overall quality status of assigned projects or products. 
7. Prepare and maintain testing deliverables in accordance with established standards, best practices, and audit or compliance requirements. 
8. Collaborate with developers, business analysts, and other stakeholders to clarify requirements, reproduce issues, and improve overall product quality. 
9. Perform other duties and responsibilities as assigned by the company from time to time. 

JOB REQUIREMENT :

1. Candidate must possess at least a Bachelor’s Degree in Computer Science or Information Technology, or a related field, and/or relevant professional certifications. 
2. Minimum 2 years of working experience in software testing/ quality assurance or related field. 
3. Good understanding of the software testing lifecycle and structured testing processes. 
4. Strong analytical and problem-solving skills, with good presentation skills and a high level of written and verbal communication in both English and Bahasa Malaysia. 
5. Basic understanding of programming languages, networking, or system infrastructure will be an added advantage. 

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

主要職責和責任

成功應徵者將負責：

1. 確保機器和/或設備的現場設置、安裝、測試任務、維護、製造、修理和保養按計劃或根據需要進行。
2. 監控、控制和調整機器設備，以提高品質、生產效率和生產線效率。
3. 維護、保養、修理工廠內的設施和設備。
4. 保持機器、設備和車間區域的清潔。
5. 確保所有維護和保養流程均依照 ISO 9001、HACCP/GMP、ISO 22000 和 FSSC 22000 的要求執行。
6. 遇到任何問題，均需向主管及/或部門主管報告。
7. 公司和/或部門上級指派的其他職責。

所需資格和技能

理想的候選人應具備：

1. 至少擁有電氣/機械/機電工程文憑或鍋爐工證書或同等資格。
2. 具備良好的機械或電氣知識，並在製造業環境中擁有相關工作經驗者優先考慮。
3. 歡迎應屆畢業生申請。
4. 學習熱情高，工作態度積極。
5. 可靠，能夠獨立工作，只需極少監督。
6. 能夠有效執行指令並排除故障。
7. 注重細節，能夠保持高度謹慎。
8. 良好的分析和故障排除能力。
9. 具備良好的人際溝通能力，能夠有效地與上司、同事及其他各級人員溝通。
10. 具備電腦操作能力，熟練使用微軟辦公室軟體及其他相關軟體和應用程式。
11. 願意輪班工作。
12. 總部設在馬六甲亞羅牙也。
13. 擁有自己的交通工具。
14. 現有全職職缺。

福利待遇

• 津貼（旅費、交通費等）
• 休閒著裝要求
• 個人休假
• 開放文化
• 個人發展機會
• 有薪培訓和發展

Job Description

• Develop, maintain and generate smart scope programs for use in inspection, verification of production materials for incoming, outgoing, FAI and in-process parts.
• Work closely with the QA team to measure, examine and test molded part to identify defects and non-conformance to specification.
• Manage and maintain all measurement machine to ensure functionality and meeting production needs.
• Prepare and submit required report(s) or documentation ensure clear identification of product inspection status

Qualification :

• SPM / Diploma in any related field
• Able to read 2D or 3D drawings
• Good knowledge of measurement equipment such as smart scope, caliper, height gauge etc. is an advantage
• Good communication skill and able to communicate effectively with other function teams
• Able to work in a team and individually
• Able to work under the environment with fast tempo
• Good attendance and punctuality to work

Perks & Benefits

• Open culture
• Personal development opportunities

Job Descriptions:

• Provide on field technical assistance and service all small items, massage chairs, fitness products and other health related products.
• Make appointment with customers and arrange doorstep technical / customer service
• Respond promptly and address all customers’ cases within stipulated working days upon receiving the service request
• Conduct QC test on products and trouble shooting

Job Requirements:

• Possess at least a Diploma in Mechanical, Electrical or Electronic Engineering, preferable with a valid A0 Chargeman certificate.
• Candidates with at least two (2) years of working experience relating to outdoor servicing or Quality Control are encouraged to apply.
• Possess a valid license and willing to travel. Those with GDL license would be advantages.
• Mature, well organized with excellent customer service skills.
• Good command of both oral and written English and Bahasa Malaysia.
• Fresh graduates are encouraged to apply.
• Able to start work in short notice

Perks & Benefits

• Commission and bonus
• Medical insurance
• Personal leave
• Medical & Dental Benefit
• Birthday Leave

Tanggungjawab Kerja:

• Menganalisis data & melakukan kajian pasaran
• Buat panggilan sejuk & aturkan pertemuan dengan bakal pelanggan
• Kemas kini & analisis laporan aktiviti panggilan sejuk
• Sediakan sebut harga jualan (Jualan Baharu / Pembaharuan)
• Berhubung dengan penjual untuk harga terbaik
• Susulan dengan pengesahan pelanggan mengenai sebut harga untuk menutup jualan
• Mesti dapat memenuhi sasaran jualan (Suku Tahunan)

Keperluan Kerja:

• Berminat dengan IT, teknologi & penyelesaian digital
• Pengalaman jualan adalah bonus — graduan baru digalakkan untuk memohon
• Kemahiran komunikasi yang baik, proaktif & berorientasikan prestasi
• Mampu bekerja secara bebas dan konsisten mencapai target

Mengapa Sertai Kami?

• Gaji Pokok dari RM3,500 (sepadan dengan pengalaman)
• Komisen tanpa had – lebih banyak anda tutup, lebih banyak anda perolehi
• Kemajuan kerjaya yang jelas dengan peluang pertumbuhan jangka panjang
• Latihan komprehensif dalam penyelesaian IT & strategi jualan
• Persekitaran kerja yang profesional, menyokong & pantas
• Nikmati pengaturan kerja fleksibel dari mana-mana sahaja di KL / Selangor, dengan komitmen untuk menghantar laporan harian dan menghadiri mesyuarat secara bersemuka dua kali sebulan

Job Responsibilities : 

• Analyze data & do market research
• Make cold call & arrange meet up with potential customer
• Update & analyze report of cold call activities
• Prepare sales quotation (New Sales / Renewal)
• Communicate with vendor for best pricing
• Follow-up with customer confirmation on the quotations to close sales
• Must able meet the sales target (Quarterly)

Job Requirements :

•  Passionate about IT, technology & digital solutions
•  Sales experience is a bonus — fresh graduates are encouraged to apply
• Strong communication skills, proactive & performance-driven
•  Able to work independently and consistently meet targets

Why Join Us?

• Basic Salary from RM3,500 (commensurate with experience)
• Unlimited commission – the more you close, the more you earn
• Clear career progression with long-term growth opportunities
• Comprehensive training in IT solutions & sales strategies
• Professional, supportive & fast-paced work environment
• Enjoy flexible work-from-anywhere arrangement in KL / Selangor , with commitment to submit daily reports and attend in-person meetings twice a month

工作職責：

• 分析數據並進行市場調查
• 進行陌生拜訪並安排與潛在客戶見面
• 更新並分析陌生拜訪活動報告
• 準備銷售報價單（新銷售/續約）
• 與供應商溝通，取得最優價格
• 跟進客戶確認報價，以完成銷售。
• 必須能夠完成銷售目標（季度）

職位要求：

• 對IT、技術和數位解決方案充滿熱情
• 有銷售經驗者優先考慮－我們也歡迎應屆畢業生申請。
• 溝通能力強，積極主動，績效導向。
• 能夠獨立工作並持續達成目標

為什麼要加入我們？

• 基本工資3500令吉起（視經驗而定）
• 佣金無上限－成交越多，收入越高。
• 清晰的職涯發展路徑與長期發展機會
• 全面的IT解決方案與銷售策略培訓
• 專業、互助且快節奏的工作環境
• 在吉隆坡/雪蘭莪享受靈活的遠距辦公安排，但需承諾每日提交報告並每月參加兩次線下會議。

Job Responsibilities : 

• Analyze data & do market research
• Make cold call & arrange meet up with potential customer
• Update & analyze report of cold call activities
• Prepare sales quotation (New Sales / Renewal)
• Communicate with vendor for best pricing
• Follow-up with customer confirmation on the quotations to close sales
• Must able meet the sales target (Quarterly)

Job Requirements :

•  Passionate about IT, technology & digital solutions
•  Sales experience is a bonus — fresh graduates are encouraged to apply
• Strong communication skills, proactive & performance-driven
•  Able to work independently and consistently meet targets

Why Join Us?

• Basic Salary from RM3,500 (commensurate with experience)
• Unlimited commission – the more you close, the more you earn
• Clear career progression with long-term growth opportunities
• Comprehensive training in IT solutions & sales strategies
• Professional, supportive & fast-paced work environment
• Enjoy flexible work-from-anywhere arrangement in KL / Selangor , with commitment to submit daily reports and attend in-person meetings twice a month

Major Duties and Responsibilities

The successful candidate will be responsible for:

1. Ensuring on-site set up, installation, test task, maintenance, fabrication, repairing and servicing of machines and or equipment are done according to schedule or when needed.
2. Monitoring, controlling and adjusting the machines and equipment for better quality, productivity and production line effectiveness.
3. Maintaining, up-keeping, repairing the amenities and facilities in the factories.
4. Maintaining the cleanliness of the machines, equipment and workshop area.
5. Ensuring all the maintenance and servicing process are carried out according to ISO 9001, HACCP/GMP, ISO 22000 and FSSC 22000 requirements.
6. Reporting to the supervisor and/or HOD for any problems encountered.
7. Other responsibilities as assigned by Company and/or departmental superior.

Qualifications and Skills Required

The ideal candidate will have:

1. Possess at least a Diploma in Electrical/Mechanical/ Mechatronic Engineering or Boilerman certification or equivalent.
2. Possess good mechanical or electrical knowledge and relevant working experience in the manufacturing environment will be an added advantage.
3. Fresh graduates are encouraged to apply.
4. Keen to learn and positive working attitude.
5. Reliable and able to work independently with minimal supervision.
6. Able to execute instructions effectively and do trouble-shooting.
7. Detail oriented, able to practice high level of caution.
8. Good analytical and trouble-shooting skills.
9. Good interpersonal skill, able to communicate effectively to the superior, peers and all other levels.
10. Computer-literate, proficient with Microsoft Office, other relevant software and application.
11. Willing to work on shift and rotation.
12. To be based in Alor Gajah, Melaka.
13. To possess own transport.
14. Full-time positions are available.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Personal leave
• Open culture
• Personal development opportunities
• Paid training and development

職位描述：

• 提供現場技術援助和服務，包括所有小型物品、按摩椅、健身產品和其他健康相關產品。
• 與客戶預約並安排上門技術/客戶服務
• 收到服務請求後，應在規定的工作日內及時回覆並處理所有客戶提出的問題。
• 對產品進行品質控制測試和故障排除

職位要求：

• 至少擁有機械、電氣或電子工程專業的文憑，最好持有有效的A0級主管證明。
• 歡迎至少兩 (2) 年戶外服務或品質控制相關工作經驗的候選人申請。
• 持有有效駕照並願意出差。持有GDL駕照者優先考慮。
• 成熟穩重，做事井井有條，具備優秀的客戶服務技能。
• 英語和馬來語口語和書面表達能力良好。
• 歡迎應屆畢業生申請。
• 能夠立即開始工作

福利待遇

• 佣金和獎金
• 醫療保險
• 個人休假
• 醫療和牙科福利
• 生日假

Job Description

• Perform scheduled maintenance and corrective repair on machines like scissorlift, boomlift, etc.
• Diagnose mechanical, electrical, hydraulic, and control system issues.
• Conduct safety inspections and function tests.
• Carry out troubleshooting.
• Prepare service reports and update maintenance records.
• Respond to breakdowns and provide on-site repairs when required.
• Ensure compliance with all safety procedures and work instructions.

Requirements

• Certificate / Diploma in Mechanical, Electrical, Mechatronic, Automotive or related field.
• Experience in repairing heavy machinery, aerial platforms, or industrial equipment is an added advantage.
• Knowledge in Hydraulic systems, Electrical systems (DC/AC circuits, controllers, wiring), Mechanical components (motors, gearboxes, bearings).
• Able to troubleshoot independently.
• Possess valid driving license.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Regular team activities
• Company trips
• Open culture
• Personal development opportunities