Total 686 systems engineer job vacancies in Quality Assurance / Control category

JOB RESPONSIBILITIES

· Develops and conducts test plans and protocols for design verification, process characterization, process validation, finished product and benchmarking study to generate test reports with sound engineering principle.

· Design, develop, and implement automated and manual test procedures for functional, performance, and regression testing.

· Identifies and consolidates requirement lists from product performance, functional and regulatory aspects

· Drives the entire design verification and validation activities to ensure compliance to regulatory requirements such as IEC, FDA, GMP, ISO and IEC standards.

· Develops and executes various benchmark testing to understand product quality compared to existing products

· Develops and validates new equipment and fixtures to conduct various testing.

· Conducts feasibility testing together with product development and quality team

· Liaise with external test labs to obtain critical data for test reports.

· Work with equipment vendors to identify test equipment that meets testing requirements.

· Participate in Risk Management and Failure Analysis exercises such as FMEA (Failure Mode & Effects Analysis).

· Identify, document, and track defects using issue tracking tools.

· Work closely with development teams to identify and address potential issues early in the development lifecycle

· Communicate all identified risks to your Test/Team Lead

· Summarizes test report and present to project and management team.

· Perform other tasks as assigned by the supervisor.

JOB REQUIREMENTS

· Degree or Masters in Mechanical/Electrical/Bio Engineering or related field

EXPERIENCE

· Minimum 3-5 years relevant experience, preferably in Medical Device, Automotive or Aerospace industry.

· Knowledge and familiar with IEC60601 test and requirements.

SKILLS

· Strong in mechanical and electrical fundamentals.

· Good understanding of DOE (Design of Experiments) principles.

· Prefarably with six sigma green belt training

PURPOSE OF JOB

In close partnership with the Head of Department, the selected candidate will work collaboratively with WEO manufacturing sites to support the seamless implementation of the corporate quality objectives.

The individual will oversee the complaint handling process, monitor quality assurance performance metrics, and ensure timely and effective corrective actions are implemented to address quality issues and negative trends.

JOB DUTIES

Non-conformity & Complaint Handling

• Timely processing of Material Review Board (MRB) cases

• Liaison between customer and factory/supplier on quality issues

• Coordinate investigations and root cause analysis, and drive product quality improvements

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

First Article

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Review FA documentation for completeness and submit the FA package for qualification

Quality systems/Continuous improvement

• Coordinate the Sustainability Initiatives with manufacturing sites

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Collaborate with cross-functional departments to lead quality improvement initiatives

• Preparation and handling of external audits

• Conduct Safety & QEMS awareness and quality tools training

• Track, monitor and report QA performance metrics

• Perform other quality-related duties as assigned

CANDIDATE REQUIREMENTS

Experience:

• 5 years of experience in a Quality function role preferred, ideally within optics manufacturing or precision assembly environment.

Qualifications:

• Minimum Bachelor’s Degree or Master’s in Engineering, Mechanical, Manufacturing, Physics, or related discipline.
  

Other Requirements:

• Sound knowledge and application of Quality tools, ISO 9001 and ISO 14001 standards

• Experienced in Optical measurement equipment

• Excellent written and spoken English. Ability to communicate effectively with counterparts in China and Malaysia is an advantage for coordination across regional sites and supplier/customer discussions.

• Willingness and ability to travel to production sites, suppliers, and customers located in China and Malaysia are required

Key Competencies Required For the Job

• Ability to communicate clearly

• Demonstrates Open and Growth mindset

• Demonstrates critical thinking and logical approach when addressing problems

• Leadership capability and ability to drive cross-functional quality improvements

PURPOSE OF JOB

In close partnership with the Head of Department, the selected candidate will work collaboratively with WEO manufacturing sites to support the seamless implementation of the corporate quality objectives.

The individual will oversee the complaint handling process, monitor quality assurance performance metrics, and ensure timely and effective corrective actions are implemented to address quality issues and negative trends.

JOB DUTIES

Non-conformity & Complaint Handling

• Timely processing of Material Review Board (MRB) cases

• Liaison between customer and factory/supplier on quality issues

• Coordinate investigations and root cause analysis, and drive product quality improvements

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

First Article

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Review FA documentation for completeness and submit the FA package for qualification

Quality systems/Continuous improvement

• Coordinate the Sustainability Initiatives with manufacturing sites

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Collaborate with cross-functional departments to lead quality improvement initiatives

• Preparation and handling of external audits

• Conduct Safety & QEMS awareness and quality tools training

• Track, monitor and report QA performance metrics

• Perform other quality-related duties as assigned

CANDIDATE REQUIREMENTS

Experience:

• 5 years of experience in a Quality function role preferred, ideally within optics manufacturing or precision assembly environment.

Qualifications:

• Minimum Bachelor’s Degree or Master’s in Engineering, Mechanical, Manufacturing, Physics, or related discipline.
  

Other Requirements:

• Sound knowledge and application of Quality tools, ISO 9001 and ISO 14001 standards

• Experienced in Optical measurement equipment

• Excellent written and spoken English. Ability to communicate effectively with counterparts in China and Malaysia is an advantage for coordination across regional sites and supplier/customer discussions.

• Willingness and ability to travel to production sites, suppliers, and customers located in China and Malaysia are required

Key Competencies Required For the Job

• Ability to communicate clearly

• Demonstrates Open and Growth mindset

• Demonstrates critical thinking and logical approach when addressing problems

• Leadership capability and ability to drive cross-functional quality improvements

PURPOSE OF JOB

In close partnership with the Head of Department, the selected candidate will work collaboratively with WEO manufacturing sites to support the seamless implementation of the corporate quality objectives.

The individual will oversee the complaint handling process, monitor quality assurance performance metrics, and ensure timely and effective corrective actions are implemented to address quality issues and negative trends.

JOB DUTIES

Non-conformity & Complaint Handling

• Timely processing of Material Review Board (MRB) cases

• Liaison between customer and factory/supplier on quality issues

• Coordinate investigations and root cause analysis, and drive product quality improvements

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

First Article

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Review FA documentation for completeness and submit the FA package for qualification

Quality systems/Continuous improvement

• Coordinate the Sustainability Initiatives with manufacturing sites

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Collaborate with cross-functional departments to lead quality improvement initiatives

• Preparation and handling of external audits

• Conduct Safety & QEMS awareness and quality tools training

• Track, monitor and report QA performance metrics

• Perform other quality-related duties as assigned

CANDIDATE REQUIREMENTS

Experience:

• 5 years of experience in a Quality function role preferred, ideally within optics manufacturing or precision assembly environment.

Qualifications:

• Minimum Bachelor’s Degree or Master’s in Engineering, Mechanical, Manufacturing, Physics, or related discipline.
  

Other Requirements:

• Sound knowledge and application of Quality tools, ISO 9001 and ISO 14001 standards

• Experienced in Optical measurement equipment

• Excellent written and spoken English. Ability to communicate effectively with counterparts in China and Malaysia is an advantage for coordination across regional sites and supplier/customer discussions.

• Willingness and ability to travel to production sites, suppliers, and customers located in China and Malaysia are required

Key Competencies Required For the Job

• Ability to communicate clearly

• Demonstrates Open and Growth mindset

• Demonstrates critical thinking and logical approach when addressing problems

• Leadership capability and ability to drive cross-functional quality improvement

PURPOSE OF JOB

In close partnership with the Head of Department, the selected candidate will work collaboratively with WEO manufacturing sites to support the seamless implementation of the corporate quality objectives.

The individual will oversee the complaint handling process, monitor quality assurance performance metrics, and ensure timely and effective corrective actions are implemented to address quality issues and negative trends.

JOB DUTIES

Non-conformity & Complaint Handling

• Timely processing of Material Review Board (MRB) cases

• Liaison between customer and factory/supplier on quality issues

• Coordinate investigations and root cause analysis, and drive product quality improvements

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

First Article

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Review FA documentation for completeness and submit the FA package for qualification

Quality systems/Continuous improvement

• Coordinate the Sustainability Initiatives with manufacturing sites

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Collaborate with cross-functional departments to lead quality improvement initiatives

• Preparation and handling of external audits

• Conduct Safety & QEMS awareness and quality tools training

• Track, monitor and report QA performance metrics

• Perform other quality-related duties as assigned

CANDIDATE REQUIREMENTS

Experience:

• 5 years of experience in a Quality function role preferred, ideally within optics manufacturing or precision assembly environment.

Qualifications:

• Minimum Bachelor’s Degree or Master’s in Engineering, Mechanical, Manufacturing, Physics, or related discipline.
  

Other Requirements:

• Sound knowledge and application of Quality tools, ISO 9001 and ISO 14001 standards

• Experienced in Optical measurement equipment

• Excellent written and spoken English. Ability to communicate effectively with counterparts in China and Malaysia is an advantage for coordination across regional sites and supplier/customer discussions.

• Willingness and ability to travel to production sites, suppliers, and customers located in China and Malaysia are required

Key Competencies Required For the Job

• Ability to communicate clearly

• Demonstrates Open and Growth mindset

• Demonstrates critical thinking and logical approach when addressing problems

• Leadership capability and ability to drive cross-functional quality improvements

Job Summary:

Responsible for planning and managing measurement activities for new projects, including measurement planning, tooling and inspection fixture development, and measurement programming. Ensure all measurement processes comply with drawing specifications and quality standards.

The role involves coordinating with internal teams, mold manufacturers, and customers to validate measurement methods and results, supporting product development and production quality. The Quality Engineer will also oversee measurement system analysis (MSA), maintain measurement documentation, and ensure proper use, calibration, and maintenance of measuring instruments to achieve accurate and reliable inspection outcomes.

Job Duty and Responsibility:

• Develop a measurement plan based on drawing requirements: select appropriate measuring instruments such as coordinate measuring machines (CMM), articulated arms, projectors, calipers, micrometers, height gauges, etc.
• Determine whether inspection fixtures or auxiliary measuring tools are required, and define measurement personnel and cycle.
• Benchmark measurement plans and results with mold manufacturers and customers.
• Prepare coordinate measurement programming according to drawing requirements and guide technicians/inspectors in performing measurement procedures correctly.
• Develop measurement plans, submit reports to internal and external customers in a timely manner, and explain results when required.
• Responsible for the organization and archiving of measurement reports.
• Prepare operating instructions for measuring instruments and auxiliary tools.
• Train and guide newly hired measurement technicians/inspectors.
• Participate in the development of gauges and tooling, and provide suggestions on design and maintenance.
• Conduct regular inspection, maintenance and servicing of measuring instruments.
• Participate in acceptance and annual review of measuring and testing tools.
• Complete other tasks as assigned.

Entry Requirements:

• Diploma or Degree in Mechanical Engineering, Polymer Materials, or related field, or equivalent practical experience
• Proficient in GD&T knowledge
• Proficient in 3D software such as Pro-E, SolidWorks, Catia or NX
• Familiar with MSA and measurement management knowledge
• Strong logical thinking, communication and coordination skills, with ability to work in a team environment

Working Experience:

• Minimum 3 years of relevant working experience, preferably in a manufacturing environment.
• Candidates with experience in automotive production quality management, first-tier suppliers, or automotive fasteners will have an advantage

Other Requirements:

• Willingness to travel overseas for meetings or training when required

想定配属先
オペレーショングループ　品質保証統括部　品質保証ラボラトリ

募集背景
本チームでは半導体デバイスの不良解析業務を担っており、特に即戦力となる解析経験者を求めております。半導体テスタやX線検査、光学/電子顕微鏡など幅広く活躍の場があり、解析エンジニアにとっては魅力的な環境が揃っております。

職務内容
・半導体テスタ (ATE)を用いた調査
・X線検査装置や光学顕微鏡を用いた検査

About the role

We are seeking a highly motivated and experienced Senior Compliance Engineer to lead and support hardware and reagent compliance initiatives across global regulatory frameworks. In this role, you will be responsible for interpreting and implementing regulatory requirements, managing product certifications, and ensuring compliance with standards such as UL, CE, FCC, RoHS, REACH, and other international directives. You will collaborate closely with cross-functional teams—including engineering, manufacturing, supply chain, and regulatory affairs—to ensure that all hardware and reagent products meet applicable compliance standards throughout their lifecycle. This position is critical to enabling successful product launches and sustaining market access across key global regions.

What you will be doing:

Hardware Product Compliance:

• Collaborating with a cross-functional team to ensure compliance to regulatory requirements including UL, CSA, FCC, CE, KCC, SRRC, PSE, CB.
• Submitting official certification through relevant compliance bodies such as FCC, CE, UL, TUV, KCC, MIC, SRRC, etc. and acting as a liaison between 10x Genomics and state, local, federal and international agencies to submit required forms and paperwork while maintaining date and files for future reference, particularly in the event of an audit by a regulatory agency.
• Understanding RoHS, REACH, TSCA, Waste Electrical and Electronic Equipment Regulation and ensuring that new and existing products are designed to comply with those guidelines and tested accordingly.
• Determining and interpreting the relevant regulatory standards such as IEC 61010-1, IEC 61010-2-010, IEC 61010-2-081, IEC 60601 and how they apply to 10x Genomics products to establish and maintain guidelines and best design practices to mitigate compliance issues early in the design phase.
• Ensuring compliance with global EMC and EMI regulatory requirements, and working closely with electrical and systems engineering teams to define and implement design guidelines for shielding, grounding, and layout strategies to reduce emissions and improve immunity.
• Staying up to date with any changes to global agency approvals and testing procedures, as well as reviewing marketing, legal and technical documentation (for example: labeling user guides and declaration of conformity) to assess compliance with regularly reporting on compliance status and measures to both internal and external parties.
• Maintaining a deep understanding of new and existing regulation that may impact 10x Genomics products and processes and using that understanding to standardize all business operations and establish clearly documented protocols while explaining regulations, procedures and policies to all employees and stakeholders as necessary.
• Preparing Manufacturing site ready for the Regulatory Body audit for Product Safety Certification. Establishing a routine manufacturing test equipment Program for Hipot & Ground Bond testing, and managing bi-annual audits with external regulatory agencies for Product Safety Certification.

Minimum Requirements:

• Minimum of Bachelor’s degree in Electrical Engineering or related engineering field
• Given the complexity and narrow scope of business requirements, we also require Senior Regulatory Compliance Engineer, to have several years of experience and expertise in electrical engineering processes and procedures
• 10+ years of experience in regulatory compliance for hardware products, reagents, or both—preferably within the life sciences, diagnostics, or medical device industries
• Additional Experience with chemical and reagent compliance, including SDS authoring, GHS/CLP labeling, and familiarity with REACH, TSCA, and international chemical inventory regulations is strongly preferred
• Familiarity with environmental regulations (RoHS, REACH, WEEE, TSCA, etc.) and how they apply to product design, component selection, and global distribution
• Strong project management skills, with the ability to manage multiple regulatory timelines and interact with cross-functional teams (e.g., R&D, manufacturing, supply chain)
• Excellent technical writing and documentation skills, including experience with compliance reports, regulatory submissions, and audit-ready file maintenance
• Ability to interpret regulatory language and apply it practically to product development and compliance strategies
• Experience with software coding is an added advantage. 

Lead and implement Quality Assurance activities to meet the plant metrics goal and Quality Management System. To support Ethics and Compliance, EHS, Human Resources, Delivery, Cost and CORE action plans.

Roles and  Responsibilities
- Develop detailed inspection plans for aerospace components and assemblies, ensuring compliance with customer requirements, engineering specifications, and regulatory standards.

- Collaborate with design and engineering teams to define the most appropriate inspection methods and criteria for new parts, assemblies, and systems.

- Identify and select suitable inspection tools, techniques, and measurement equipment (e.g., CMM, optical, gaging etc.).

- Establish acceptance criteria and tolerances for aerospace products based on engineering drawings, material specifications, and industry standards.

- Create and maintain detailed inspection reports, documentation, and records, ensuring that all inspection activities are traceable and compliant with regulatory requirements.

- Develop inspection records that support traceability and certification, including first article inspections (FAI), in-process inspections, and final inspections.

- Create CMM or  Gear Programming for in process inspection and final inspection.

- Ensure that all inspection processes adhere to aerospace industry standards, including AS9100, AS9110, AS9120, NADCAP, FAA regulations, and customer-specific requirements.

- Ensure compliance with safety standards and regulations, ensuring that all personnel are trained and knowledgeable about relevant protocols.

- Support internal and external audits related to inspection processes and quality assurance systems.

- Investigate and perform root cause analysis for any quality issues or inspection failures, using tools such as 8D, FMEA, and Fishbone diagrams.

- Lead initiatives to improve inspection processes, reduce inspection times, and increase the accuracy and reliability of inspections.

- Stay current with the latest inspection technologies, methodologies, and trends in the aerospace industry.

Minimum Education required (specific field or equivalent):

Degree in Mechanical/ Manufacturing Engineering.

Minimum years of experience in role:

At least 3 years working experience in a manufacturing environment.

Preferred Skills (if any):

- Strong knowledge of engineering drawings, tolerances, and geometric dimensioning and tolerancing (GD&T).

- Proficiency in the use of inspection tools and equipment (e.g., CMM, calipers, micrometers, etc.).

- Strong analytical and problem-solving skills with the ability to perform root cause analysis and propose corrective actions.

- Good working on Quality Management System meeting AS9100, AS9102, AS13100 requirements.

- Competent in Microsoft Office applications.

- Experience to use simple CAD/drawing software, well on engineering drawing interpretation.

- Knowledge of Co-Ordinate Measuring Machine (CMM), and Non Destructive Testing (NDT) will be added advantages.

- Effective communication and interpersonal skills.

- Able to work rotating shifts.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

We are seeking a skilled and motivated Cloud Test Engineer to join our team. In this role, you will play a crucial part in ensuring the quality and reliability of our cloud-based software solutions for medical devices product.

If you are passionate about leveraging cloud technology to make a positive impact on medical device product, we want to hear from you.

Your Responsibilities

• Develop and execute test plans, test cases, and test scripts for Cloud-based software solutions, ensuring thorough testing coverage.
• Collaborate with cross-functional teams, including software developers, product managers, and quality assurance professionals, to identify and address software defects.
• Design, implement, and maintain automated testing frameworks for cloud-based applications to enhance testing efficiency and scalability.
• Conduct performance testing, load testing, and stress testing of Cloud-based software systems to ensure optimal performance under various conditions.
• Work closely with regulatory affairs and compliance teams to ensure testing proceccess align with industry standards and regulations.

Your Profile

• Bachelor’s Degree in Computer Science, Software Engineering, or a related field; advanced degree preferred.
• Proven experience as a Test Engineer is preferable.
• Experience with automated testing frameworks such as Selenium, Junit and Gherkin.
• Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Platform.
• Strong analytical skills and attention to detail.
• Excellent communication skills and the ability to collaborate effectively in a team environment.
• Prior experience from the healthcare or medical device industry would be an added advantage.

What we offer

• being encouraged to think and act entrepreneurially
• working in global teams and projects
• developing yourself professionally

THE ROLE:

Test Engineering is a cost, quality, and time-to-market driven team responsible for enabling the availability of FPGAs, SoCs & ACAPs to our customers.  The Test Engineer will be involved in new product release as well as production yield/quality improvement activities.  This role requires close collaboration with Test Pattern Developers & Product Engineers to create test programs that provide optimum test coverage for our products.  There are also ample opportunities to work on cost reduction and test capacity improvement projects.    

THE PERSON:

Looks forward to new challenges. Has good analytical and problem-solving skills. Enjoy working in cross-functional teams. Has effective communication and presentation skills.

Fluent in both oral and written English.

KEY RESPONSIBILITIES:

• Develops ATE test programs to test FPGA & SoCs products.  This involves constructing or enhancing test methods, and integration of timings/ levels and test flow into a test program.
• Involved with New Product Introduction process and works with test pattern developers in generating, debugging, and implementing new test patterns.
• Other duties include working with product/yield engineers in implementing new test requirements for yield and quality improvements; as well as working on productivity improvement and cost reduction activities such as test time reduction and multi-site development & implementation.
• Analyze large test datasets to drive yield improvement, failure analysis, and continuous optimization; build automated dashboards and reports.
• Manage and execute complex test cost reduction projects and New Product bring up

PREFERRED EXPERIENCE:

• The candidate should have 5 or more years of ATE test program development experience. In-depth knowledge and hands-on experience in one or more of the following ATE platforms are desired: Advantest T2000 and/or Verigy93000 (Smartest 7/8).
• There should be a proven track record of developing and releasing new test programs to production.  Good understanding of test concepts & new product development cycle is desired.
• Advanced proficiency in Python and C++ for ATE test development, tooling, and data analysis; experienced with libraries such as OpenSSL, NumPy, and Pandas, and capable of designing and maintaining robust regression test suites.
• Practical experience with Git for version control and Confluence for documentation and knowledge management.
• Strong hands-on Linux skills for development, automation, scripting, and environment management.

ACADEMIC CREDENTIALS:

• Bachelor’s or master’s degree in Electronics Engineering
• Specialization in Electronics or Computer Engineering is preferred.

We’re partnering with a well-funded, fast-growing tech company to hire a Senior QA Engineer to join their team.

• Proven track record in QA leadership with hands-on expertise in test automation, quality enablement, and shift-left practices.
• Develop and execute test strategies covering functional, integration, regression, and performance testing.
• Maintain and enhance automation frameworks and CI/CD pipelines; ensure thorough regression coverage.
• Mentor QA team members on modern automation, methodologies, and AI-assisted testing.
• Collaborate with Product, Engineering, and DevOps to ensure testable requirements and high-quality releases.
• Own QA domain vision, metrics, and workplans; drive collaboration and continuous improvement across teams.

Reach out to Ayla at ayla@nodeflair.com for a confidential discussion.
EA License No: 19S9830

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Ensure all quality control documentation is compiled and completed for as-built handover through the QC turnover engineer
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection, etc)
• Establish Project Quality System, implement and maintain in accordance with Singapore standards application to BCA for CONQUAS Assessment and provide a framework to achieve the score
• Assess the implementation of the Quality Plan and Quality Control Plans on site
• Ensure the project QA/QC plan follows specifications and contract requirements
• Compete for site quality control instructions and action remedial responses
• Coordinate quality inspections with all the site subcontractors and vendors and coordinate all non-destructive testing on site
• Distribute relevant QA/QC documentation to site subcontractors
• Verify the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site's internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Control all nonconformance reports and undertake remedial action
• Must have fluent English communication skills to liaise with the Client’s staff
• Have Main Contractor Experience