Total 1,188 software test engineer job vacancies in Others category

Key Responsibilities

• Support installation, commissioning, and acceptance testing of DWDM systems.

• Perform optical power measurement, span loss validation, and fiber characterization.

• Execute MOPs under supervision during maintenance and firmware upgrades.

• Conduct pre-checks and post-checks for system health verification.

• Coordinate with NOC, PMO, and vendor support teams during scheduled activities.

• Maintain accurate documentation, runbooks, and post-activity reports.

Requirements

• Diploma or Degree in Electrical, Electronics, or Telecommunications Engineering.

• Basic understanding of optical transmission concepts (CWDM, DWDM, OSNR, BER).

• Familiar with fiber tools (OTDR, light source, power meter).

• Willing to learn vendor-specific platforms (Ciena 6500, ADTRAN/ADVA FSP3000).

• Strong discipline in following procedures and reporting deviations.

• Fresh graduates or 1–2 years’ experience in optical/network field preferred.

 Senior Optical Engineer

Key Responsibilities

• Lead optical deployment and maintenance projects across Ciena and ADTRAN platforms.

• Perform system-level configuration, firmware upgrades, and encryption module handling.

• Troubleshoot service degradation, key exchange issues, or alarm faults (e.g., shutoff threshold, crypto password errors).

• Coordinate with vendor TAC (Ciena, ADTRAN) for escalation and RCA resolution.

• Validate and endorse MOPs, risk assessments, and rollback plans.

• Mentor junior engineers and provide technical guidance during live operations.

• Ensure ITIL-aligned process compliance across change and incident management.

Requirements

• Degree in Electronics, Telecommunications, or related field.

• Minimum 4–6 years of hands-on experience in DWDM/OTN optical systems.

• Proficient in Ciena 6500 and/or ADTRAN FSP3000 R7–R8/F8 systems.

• Strong troubleshooting skills on OSNR, BER, fiber impairments, and encryption modules.

• Experience handling vendor firmware upgrades, EMS (Site Manager/FSP NM), and key exchange configurations.

• Familiar with optical design principles, span power balancing, and redundancy planning.

• Excellent documentation, communication, and leadership skills.

 Soft Skills

·       Strong analytical, problem-solving, and troubleshooting skills.

·       Excellent communication skills (written and verbal), with the ability to clearly convey technical concepts.

·       Ability to work independently and as part of a cross-functional team.

·       Strong attention to detail and ability to manage multiple tasks efficiently.

·       Ability to work in a fast-paced, deadline-driven environment.

Job Description

1. Project Planning and Design:

• Develop detailed engineering plans and designs for infrastructure projects such as roads, bridges, buildings, and water systems.
• Use computer-aided design (CAD) software and other engineering tools to create and analyze designs.

2. Project Management:

• Oversee the construction and implementation of projects to ensure they meet design specifications, budgets, and deadlines.
• Coordinate with architects, contractors, and other stakeholders to ensure project success.

3. Site Inspection and Evaluation:

• Conduct inspections of construction sites to monitor progress and ensure compliance with safety standards and building codes.
• Evaluate existing structures and systems for potential improvements or repairs.

4. Problem Solving:

• Address engineering problems and provide innovative solutions to overcome challenges in design and construction.
• Ensure that all engineering solutions adhere to environmental regulations and standards.

5. Documentation and Reporting:

• Prepare and maintain detailed project documentation, including reports, specifications, and contracts.
• Provide regular updates to project stakeholders and clients on project status and any issues.

6. Compliance and Safety:

• Ensure that all projects comply with local, state, and federal regulations and standards.
• Implement safety procedures and protocols to protect workers and the public.

Requirements

1. Education:

• Bachelor’s degree in Civil Engineering or a related field is typically required. Some positions may require a Master’s degree.

2. Licensure:

• Professional Engineer (PE) license is often required for more senior positions or for those who are responsible for signing off on engineering plans. Licensing requirements vary by region.

3. Experience:

• Relevant work experience in civil engineering, including internships or previous positions, is usually required. Entry-level positions may require less experience, while senior roles will demand more extensive experience.

4. Technical Skills:

• Proficiency in engineering software such as AutoCAD, Civil 3D, and other design and modeling tools.
• Strong understanding of structural analysis, materials science, and construction methods.

5. Analytical Skills:

• Ability to analyze complex data and engineering problems and develop effective solutions.

6. Communication Skills:

• Strong verbal and written communication skills to interact effectively with clients, team members, and stakeholders.

7. Problem-Solving Abilities:

• Ability to think critically and solve problems that arise during project planning and execution.

8. Teamwork and Leadership:

• Ability to work collaboratively in a team and, in some cases, lead project teams or manage junior engineers.

9. Attention to Detail:

• High attention to detail to ensure accuracy and adherence to standards in design and construction.

10. Physical Requirements:

• Some roles may require the ability to work on construction sites, which may involve physical activity and exposure to outdoor conditions.

Job Description

We are seeking a proactive and detail-oriented Project Engineer to manage engineering projects from quotation stage through production and final delivery. The successful candidate will coordinate closely with internal teams to ensure projects are executed efficiently, on time, and in accordance with engineering requirements.

Key Responsibilities

• Prepare and issue project quotations based on customer requirements, drawings, and specifications
• Follow up on projects upon confirmation, ensuring smooth handover from sales to operations
• Manage projects end-to-end, including:

• Material planning and ordering

  Preparation and control of route cards

  Coordination of production planning and scheduling

  Monitoring fabrication, machining, welding, and assembly processes

  Ensuring timely delivery of parts to customers

• Liaise with internal departments such as production, purchasing, and QA to resolve project-related issues
• Track project progress and ensure compliance with technical and quality requirements
• Support continuous improvement in project execution and workflow efficiency

Requirements / Qualifications

• NITEC or Diploma in Mechanical Engineering
• Minimum 3 years of relevant working experience in a manufacturing or engineering environment
• Able to read and understand engineering drawings, including welding symbols and machining details
• With experience in CNC machining and metal fabrication will be an added advantage
• Familiar with production processes, route cards, and material planning
• Good coordination, communication, and follow-up skills
• Able to work independently and manage multiple projects concurrently

Working Conditions

• 5-day work week
• Location: Tuas
• Salary Range: SGD$3,500 – $5,000 (commensurate with experience)

Company Overview

We are partnering with a leading banking client to build next-generation AI and machine learning platforms. You will join a high-impact agile team within the ML & AI domain, working on production-grade systems that power intelligent, scalable digital solutions.

Job Description

We are seeking skilled Machine Learning Platform Engineers (MLOps / AI Engineers) to bridge the gap between experimental data science and production-ready systems.

In this role, you will contribute across the full ML lifecycle — from concept to deployment — and work closely with data scientists, engineers, and infrastructure teams to deliver robust AI-driven solutions. You will also support the development of agentic AI workflows and LLM-powered systems, enabling scalable and autonomous capabilities.

Key Responsibilities

• Design, develop, and deploy scalable machine learning solutions and services
• Build and maintain end-to-end ML pipelines (data ingestion, training, validation, deployment, monitoring)
• Operationalise LLMs, embeddings, and multi-agent systems in production environments
• Design and implement Retrieval-Augmented Generation (RAG) systems
• Manage full model lifecycle (experimentation, model registry, deployment, monitoring)
• Oversee model promotion processes, including validation gates and approval workflows
• Containerise applications using Docker and orchestrate using Kubernetes (K8s)
• Build and maintain CI/CD pipelines for ML and AI applications
• Collaborate with data scientists to productionise research code into scalable Python applications
• Monitor model performance, data drift, and system reliability in production
• Integrate AI solutions into existing enterprise systems and infrastructure
• Participate in code reviews, testing, and debugging to ensure high-quality deliverables

Requirements

Education

• Bachelor’s or Master’s degree in Computer Science, Data Science, Mathematics, Statistics, or related field

Technical Skills

• Strong proficiency in Python (clean, testable, efficient code)
• Experience with Docker and working knowledge of Kubernetes
• Hands-on experience with MLOps tools (e.g., MLflow, Weights & Biases)
• Experience working with Large Language Models (LLMs)
• Understanding of AI agents, agentic workflows, and LLM orchestration frameworks
• Experience with data preprocessing, feature engineering, and model evaluation
• Familiarity with CI/CD tools (e.g., GitLab, Jenkins)
• Understanding of GPU computing and cloud-based ML infrastructure
• Strong foundation in statistics, probability, and linear algebra

Experience

• Relevant experience in machine learning, data science, or MLOps roles
• Experience deploying models into production environments is highly preferred

Competencies

• Strong analytical and problem-solving skills
• Ability to work in a fast-paced, agile environment
• Excellent communication and stakeholder management skills
• Strong attention to detail and code quality
• Self-driven with a continuous learning mindset

Roles & Responsibilities

As a Systems Specialist, will be providing support in the following areas:

a) Windows system administration, including PowerShell scripting, system hardening, patching etc.

b) Linux (SuSE and Redhat) system administration, including shell scripting, system hardening, patching etc.

c) Virtualisation (VMware) administration, including provision of resources, hardening, patching etc.

d) Knowledge in Security Remediation process (vulnerability assessment and patch management)

e) knowledge of the following:

• Storage technology and Storage area network

• Infrastructure troubleshooting (server, network and etc)

• Commercial Clouds (AWS, Azure and GCP)

• Dockers, Containers and Kubernetes Platform operations and administrations

• Server Anti-Virus Software and Patch Management Software 

• Databases such as MS SQL, DB2 and etc

Requirements

a) Strong background in IT, Computer Science / Computer Engineering, or related discipline

b) Minimum 3 years of relevant working experience in the above technology is preferred.

c) Relevant experience in the following would be advantageous:

• Working with Docker Containers and Kubernetes

• Setting up and managing commercial cloud platform such as AWS, Azure or GCP

• Infrastructure As Code, IT Automation Tool such as Ansible, Puppet.

d) Possesses good communication and interpersonal skills

e) Have good command of written and oral English

f) Must be able to work beyond business hours including weekend when necessary

We are seeking a proactive and detail-oriented Project Engineer to manage engineering projects from quotation stage through production and final delivery. The successful candidate will coordinate closely with internal teams to ensure projects are executed efficiently, on time, and in accordance with engineering requirements.

Key Responsibilities

• Prepare and issue project quotations based on customer requirements, drawings, and specifications
• Follow up on projects upon confirmation, ensuring smooth handover from sales to operations
• Manage projects end-to-end, including:
• Material planning and ordering
• Preparation and control of route cards
• Coordination of production planning and scheduling
• Monitoring fabrication, machining, welding, and assembly processes
• Ensuring timely delivery of parts to customers
• Liaise with internal departments such as production, purchasing, and QA to resolve project-related issues
• Track project progress and ensure compliance with technical and quality requirements
• Support continuous improvement in project execution and workflow efficiency

Requirements / Qualifications

• NITEC or Diploma in Mechanical Engineering
• Minimum 3 years of relevant working experience in a manufacturing or engineering environment
• Able to read and understand engineering drawings, including welding symbols and machining details
• With experience in CNC machining and metal fabrication will be an added advantage
• Familiar with production processes, route cards, and material planning
• Good coordination, communication, and follow-up skills
• Able to work independently and manage multiple projects concurrently

Working Conditions

• 5-day work week
• Location: Tuas
• Salary Range: SGD$3,500 – $5,000 (commensurate with experience)

Micron is a global leader in memory and storage solutions, enabling transformative technology that enriches life for all. With over 40 years of innovation, Micron plays a pivotal role in the data-driven economy, where memory and storage are strategic differentiators. We are committed to sustainability, employee well-being, and community support, and we foster a culture of inclusion, collaboration, and continuous improvement. 

Responsibilities and Tasks:

• Work proactively to problem solve with yield or quality impact on our products through development of measurement recipes that can provide quick and accurate feedback on the product integrity.

• Participate in new technology development and startup alongside with Research & Development (R&D) fabrication (Fab) site in US.

• Participate in world-wide discussions such as Copy-Smart Team (CST) for continuous improvement on the toolset(s) assigned across Micron Fabs. Share Best-Known-Methods and lesson learned across the network.

• Set up tool qualification criteria and implement monitoring through Statistical Process Control (SPC) charts.

• Collaborate with Engineering Operations and/or Application teams to optimize tool maintenance schedules and utilization.

• Develop and run projects crafted to enhance inline detection, improve efficiency, reduce cost, reduce tool measurement variability and improve machine availability.

• Partner with the tool suppliers and owners to explore innovative ways of doing things to overcome the challenge of the shrinking technology nodes.

• Support Fab through data analysis, providing knowledgeable summations of results and recommendations on how to proceed with process changes, equipment availability improvements and cost reduction work.

• Ensure engineering team is trained on recipe maintenance, tool recovery, troubleshooting, and maintenance activities for the assigned tools.

• Determine Sampling strategy to meet Production, Process Control and Quality requirement.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

Requirements:

• Bachelor’s or advanced degree in Engineering or Science is required

• Strong analytical, logical, and critical thinking skills 

• Effective communicator, able to collaborate across all levels 

• Growth mindset with a passion for continuous learning 

• Internship or experience in the semiconductor industry is a plus 

• Demonstrated leadership and a track record of impact are highly desirable 

• Interest in and knowledge of the semiconductor industry and Micron is preferred.

• Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value 

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

What to Expect 

Micron is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other protected factor.

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission ofnecessary document prior to start boring work

3. Supervise in confirmation of soilboring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with maincontractor and consultant’s representative.

5. Preparation and submission ofbored pile installation record

6. Supervise and arrange the siteteam & progress thereafter report to project manager

7. Preparation of bored pile summaryand submit to main contractor and HQ

8. Submission of as built pilepenetration and eccentricity drawing

9. Receiving the time to timeinstruction of project manager

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

REQUIREMENTS:

• Experience 7.5+ years
• Strong experience in ServiceNow Development specializing in CMDB,ITOM and ServiceNow
• Hands-on experience in ServiceNow integrations with third-party systems.
• Experience in either of other modules i.e. ITOM or GRC or HRSD and ITIL knowledge..
• Demonstrated experience in implementing ServiceNow integrations with third-party platforms.
• Strong understanding of ITIL principles
• Ability to translate business requirements into technical solutions
• Develop and implement technical solutions and conduct component Integration Tests.
• Configure ServiceNow using scripting (UI Policies/Actions, Business Rules, Client Scripts, Jelly scripting, Angular JS)
• Experience in communicating effectively with users, other technical teams, and management to collect requirements, describe software product features, and technical designs
• Mentoring the team members to meet the client's needs and holding them accountable for high standards of delivery detail.

RESPONSIBILITIES:

• Understanding functional requirements thoroughly and analyzing the clients needs in the context of the project
• Envisioning the overall solution for defined functional and non-functional requirements, and being able to define technologies, patterns, and frameworks to realize it.
• Determining and implementing design methodologies and toolsets
• Enabling application development by coordinating requirements, schedules, and activities.
• Being able to lead/support UAT and production rollouts.
• Creating, understanding, and validating WBS and estimated effort for given module/task, and being able to justify it.
• Addressing issues promptly, responding positively to setbacks and challenges with a mindset of continuous improvement
• Giving constructive feedback to the team members and setting clear expectations.
• Helping the team in troubleshooting and resolving complex bugs
• Coming up with solutions to any issue that is raised during code/design review and being able to justify the decision taken.
• Carrying out POCs to make sure that suggested design/technologies meet the requirements.

As an Engineer in Micron’s HBM Component Validation team, you will contribute to validation execution for advanced HBM products, ensuring zero validation misses across MBIST and Native test modes. This role focuses on hands-on test execution, data analysis, and Verilog simulation support in a fast-paced environment, while building expertise in high-speed memory validation and automation.
 

Responsibilities

• Validation Execution

• Assist in executing Validation Runs on IQP/ETV materials under defined timelines, ensuring coverage completeness across MBIST and Native Mode flows.

• Support time-bound data crunching (log parsing, statistical summaries) and contribute to summary report preparation.

• Platform & Test Program Support

• Operate and debug programs on SM3/Cobra (MBIST) and Advantest V93K (Native).

• Assist in hardware readiness: handler, socket, loadboard, and probe card setup.
   

• Technical Analysis & Simulation

• Validate high-speed I/O (>11 Gbps) and assist with eye diagram and signal integrity checks.

• Support Verilog simulation tasks (testbench execution, waveform review) to reproduce sightings and validate fixes.
   

• Data & Automation

• Develop basic scripts in Python for log parsing and data visualization.

• Maintain documentation in Confluence/Jira and version control in Git/Perforce.
   

• Debug & Collaboration

• Participate in root cause analysis sessions and assist in corrective action closure.

• Collaborate with cross-functional teams (Design, DV, QA, GQ) and attend technical meetings.

Minimum Qualifications

• Masters in Microelectronics or Integrated Circuit Design or related field

• 2+ years experience in semiconductor validation or product engineering (DRAM/HBM preferred).

• Exposure to HBM Validation concepts and flows.

• Basic experience in test platform code development (C/C++, Python) and familiarity with APG (Algorithmic Pattern Generator).

• Understanding of MBIST or Native Mode testing platforms.

• Verilog simulation exposure (running testbenches, interpreting waveforms).

• Strong analytical and problem-solving skills; ability to work in a fast-paced environment.

Preferred Skills

• Familiarity with Linux environment and version control systems (Git/SVN).

• Comfortable with lab equipment (oscilloscopes, logic analyzers).

• Knowledge of DRAM/HBM architecture and datasheet interpretation.

• Interest in automation and continuous improvement initiatives.

POSITION OVERVIEW : EDW/EBP Batch Monitoring

POSITION GENERAL DUTIES AND TASKS :

Skillset

- Up to 4 years of IT experience

- Proven analytical abilities with solid experience in a Production Support setting.

- Strong SQL and Unix shell scripting

- Incident, problem, and service Outage management experience is Plus.

- Good Communication and Articulation Skills

- Familiarity with Teradata or Hadoop.

- Familiarity with any job scheduling tool.

Roles/Responsibilities

- Troubleshoot Batch Issues & root causes to Mitigate Impacts to SLA

- Perform root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.

- Provide operational support and ensure SLI of Applications

- Proactively Identify and Identify opportunities for preventive Maintenance

- Respond on time to the queries raised by various business units

- Provide Timely updates (Status, Progress, Issues, Resolutions) to Business Stakeholders

- Participate in Disaster Recovery and Business Continuity exercise

Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.