Total 6,503 quality control engineer job vacancies in Engineering category

Work Location                            : 6 Tampines Industrial Avenue 5 Singapore 528760
Work Day                                     : Monday to Friday (8.30am to 5.30pm)

Responsibilities:

·        To lead the quality improvements through working with all relevant department and supplier on the Kaizen activities.

·        To understand customer manufacturing quality requirement & align with the business agreement so as to work effectively with all suppliers to achieve KPI target for the line rejection.

·        Perform analysis on internal defects and drive improvements from relevant departments to achieve quality KPI.

·        To support Quality System Lead in ISO implementation for the company

·        To collaborate with internal team and provide support to Quality System Lead in all certifications requirement for the products as stated by customer

Requirement:

·        Degree/Diploma in Engineering with at least 3 years of relevant working experience in Manufacturing

·        Ability to work with the customer, HQ / factory, Peers / Subordinate, and Superiors

·        Strong problem-solving and interpersonal skills

·        Ability to work with minimal supervision

·        Able to handle customer complaint and work well with internal & external department to resolve quality issue

·        Able to provide constructive solution / advice to the team

·        Good knowledge in ISO management and customer audit

Compliance with RBA standards

The Assistant Engineer (Quality), leads daily quality control operations, ensuring precision, compliance and efficiency across production processes. Responsibilities include developing and refining inspection methods, programming and optimizing CMM and vision systems, defining acceptance criteria and verifying First Articles and production parts. The role also supports measurement traceability, automation workflows and documentation to maintain full AS9100 compliance, while preparing customer quality reports and assisting in both internal and external audits. In addition to these leadership and technical duties, the role involves hands-on operation and calibration of measuring equipment during daily quality activities to guarantee accuracy and reliability.

Key Responsibilities:

1. Inspection Methodology & Metrology Development

2. First Article, Prototype and Production Inspection

3. Automation System Management

4. Inspection Planning & Inspection Time Estimation

5. Non-Conformance Control

6. Inspector Training & Support

7. Customer Quality Compliance Support (Includes QMS)

Required Competencies:

• Proficient in GD&T, mechanical drawings and metrology tools
• Skilled in CMM and/or vision scope programming and troubleshooting
• Knowledge of AS9100/ ISO 9001 and quality documentation formats will be advantages
• Strong organizational and file management skills for traceability
• Able to train and guide inspectors while ensuring documentation integrity
• Confident in preparing basic quality reports for customer-facing use
• Able to understand and communicate in English & Mandarin for daily quality operations & reporting

Qualifications:

• Nitec in Mechanical, Manufacturing, or Quality Engineering or equivalent
• Candidate without formal academic qualifications, may be considered if they have relevant or past similar work experience
• 3 years of experience in inspection or quality control in precision machining environment
• Experience with inspection automation systems and measurement programming tools
• Capable of independent judgment in final inspection and verification tasks

Job Description

• Design, develop, and implement Advanced engineering and process control solutions to optimize production processes, streamline workflows, and boost manufacturing productivity.
• Continuously assess and enhance Advanced engineering and process control capabilities/features to meet evolving production requirements, ensuring maximum efficiency and minimal operational disruptions.
• Generate and manage comprehensive reports on production and manufacturing KPIs
• Take charge of Advanced process control (APC) and fault detection classification (FDC) projects from initiation to conclusion, defining E2E integration scope, managing timelines, and providing regular progress updates.
• Proactively monitor APC/FDC performance, pre-emptively identify potential system issues, and implement preventive measures to minimize unplanned downtime.
• Conduct regular maintenance of APC/FDC software and hardware, troubleshoot technical issues, and ensure systems operate at peak performance.
• Collaborate with production and IT teams to identify opportunities for overall Advanced engineering process control improvement and implement changes that align with long-term operational objectives.

Requirements

• Strong knowledge of programming languages such as Java, C#, Groovy or Python and experience with database management such as Oracle
• Proficient in Model predictive control definition and understanding in semiconductor manufacturing system, processes and technologies
• Proven track record in Advanced Process control system (APC, FDC) development, integration, and optimization in a semiconductor environment.
• Understanding of AMAT E3 and PDF Exensio application will be added advantage.
• Effective communication and collaboration skills, with the ability to work with IT cross functional team (MES, EA, IMC)
• Bachelor's degree or higher in Computer Engineering, Computer Science or equivalent experience

About our group:

The Equipment Manufacturing team at Seagate is responsible for the build, assembly, testing, and delivery of advanced manufacturing equipment that supports Seagate’s HDD production and technology development.

We work closely with Engineering, Supply Chain, and Operations teams to ensure equipment is delivered on time, to specification, and at the highest quality standards, enabling successful factory ramp and product innovation.

About the role – you will:          

• Lead quality planning and assurance for new product introductions, process transfers, and manufacturing operations.
• Drive implementation and continuousimprovement of AIAG core tools (APQP, PPAP, FMEA, SPC, MSA, Control Plans).
• Partner with cross‑functional teams to resolve quality issues through root cause analysis and CAPA.
• Establish and monitor key quality metric sand trends to support data‑driven decision making.
• Ensure robust inspection and validation processes through review of drawings, specifications, and GD&T.
• Support qualification and validation activities including first article inspection and process capability studies.
• Lead internal and external audits to ensure compliance with quality systems and standards.
• Drive continuous improvement, including non‑conformance resolution, supplier quality, and manufacturing quality awareness.

About you: 

• Innovative, inclusive, and integrity-driven.
• Able to work effectively in a fast-paced and dynamic environment with multiple priorities.
• Strong team player with a collaborative and resourceful approach to problem-solving.
• Detail-oriented, results-driven, and capable of working independently when required.
• Effective communicator with strong stakeholder management skills.

Your experience includes:

• Bachelor’s degree in Engineering, Quality, Manufacturing, or related discipline.
• 5–8 years of quality assurance experience in a manufacturing environment.
• Strong working knowledge of AIAG Core Tools (APQP, PPAP, FMEA, SPC,MSA) and quality systems.
• Experience in root cause analysis, CAPA, audits, and customer or supplier quality management.
• Ability to interpret engineering drawings, GD&T, and perform data analysis using tools such as Excel or similar systems.

Company Profile

We are a group of companies specializing in Workplace Hygiene and Facilities Support, serving clients across industrial, commercial, and office environments, as well as large building complexes.

As we expand into the Indoor Air Quality (IAQ) sector, our focus at hygION AIR is to deliver engineered air quality solutions built on science,precision, and purpose.

At hygION AIR, we are committed to creating healthier, safer, and moreefficient environments through advanced air quality testing, monitoring, andadvisory services.

We are seeking passionate individuals who are ready to grow with us and make a meaningful impactin the field of environmental and air quality solutions.

about the company

My client is a specialized manufacturer in the contract manufacturing space. They are a Singapore based company and with their innovative technology, this is a great brand to join at an exciting time in their development.

about the job

• Plan, coordinate and oversee all Quality Assurance activities in the Company
• Oversee the Documentation Control function for Quality Management System
• Act as the Quality Management Representative for the Company
• Develop and implement plans to collect quality data at in-process, final inspection, test and inspection stations
• Plan and execute annual Internal Audit to ensure all quality systems and procedures are effectively implemented and auditable at all times
• Develop and implement system for receipt and processing of complaints and recall of products
• Participate in all new Projects, including giving inputs from quality perspectives, performing PFMEA etc

job requirement

• Degree in Engineering or equivalent
• Manufacturing background from plastics injection medtech manufacturing environment
• Must possess ISO13485 certification

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

Job Responsibilities

• Progressing all elements of design in-line with the Design Checklist;

• Prepare electrical tender packages including specification and drawings;

• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;

• Tendering and estimating of electrical works for projects prior to award;

• Compilation and Review of Operation and Maintenance Dossier for Projects;

• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;

• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;

• Evaluating technical submittals for specification and client requirement compliance;

• Approving Test Packs at each step of construction through to completion;

• Forwarding testing and commission passing criteria to the System Supervisor.

• Progressing all elements of design in-line with the Design Checklist;

• Prepare electrical tender packages including specification and drawings;

• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;

• Tendering and estimating of electrical works for projects prior to award;

• Compilation and Review of Operation and Maintenance Dossier for Projects;

• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;

• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;

• Evaluating technical submittals for specification and client requirement compliance;

• Approving Test Packs at each step of construction through to completion;

• Forwarding testing and commission passing criteria to the System Supervisor.

• Applicant must be able to speak Tamil/Bengali fluently.

Project/ Tender Support

• Prepare and assist senior engineers in developing project plans, schedules, and documentation during project or tender phase, demonstrating understanding of project management methodologies.
• Prepare and maintain project documentation, including daily progress reports, site diaries, and as-built drawings.
• Coordinate with contractors, subcontractors, and vendors as needed.
  Support site inspections and quality control checks.

Technical Assistance

• Understand client’s requirement and prepare engineering calculations and drawings under the guidance of senior engineers.
• Prepare and assist in the selection and specification of equipment and materials.\
• Research and analyse technical data.

Quality Assurance

• Conduct site inspections and quality control checks to ensure project compliance.
  
• Prepare and implement method of statement and processes for quality assurance.
  
• Coordinate and carry out testing and commissioning activities to ensure systems are operational and meet performance requirements.
• Prepare operational and maintenance manuals and as-built drawing for project handover.

Learning & Development

• Actively seek opportunities to learn and develop technical skills.
• Participate in training programs and workshops.
• Contribute to a positive and collaborative team environment.

Requirements:

• Bachelor's degree in Mechanical Engineering.
• Minimum 2 years of relevant experience in the construction industry.
• Basic understanding of MEP systems and design principles.
• Proficiency in MS Office Suite, and CAD software (e.g., AutoCAD).
• Strong attention to detail and organizational skills.
• Willingness to learn and adapt to new technologies and industry trends

A senior position may be offered depending on the candidate’s experience.

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation and supervise site works compliances and inspection requirement·      
• Carry out daily site supervision, coordination and quality assurance of all trades implementation on site
• Work closely with sub-contractors on project progress and ensure timely work arrangements
• Keep track on variation and claims of contract and cost impact and feedback information to Senior Engineer/ Project Manager
• Checking plans, drawings and quantities for accuracy of calculations
• Scheduling materials and equipment purchases and deliveries
• Liaise with consultant and carry out site inspection
• Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progression report

Requirements:

• Possess Degree in Civil Engineering and recognise by PE Board
• 3 year’s working experience in local project is preferred·
• Good team player and able to work independently with positive attitude

Key Responsibilities:

• Design and test electrical systems and circuits.
• Troubleshoot and resolve electrical issues.
• Ensure compliance with safety and industry regulations.
• Collaborate with teams on project development.
• Document technical specifications and reports.

Requirements:

• Bachelor’s degree in Electrical Engineering or related field.
• Strong problem-solving and analytical skills.
• Knowledge of power systems, electronics, and automation.

• Progressing all elements of design in-line with the Design Checklist;

• Prepare electrical tender packages including specification and drawings;

• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;

• Tendering and estimating of electrical works for projects prior to award;

• Compilation and Review of Operation and Maintenance Dossier for Projects;

• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;

• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;

• Evaluating technical submittals for specification and client requirement compliance;

• Approving Test Packs at each step of construction through to completion;

• Forwarding testing and commission passing criteria to the System Supervisor.

Responsibilities:

• Analyze requirements, design, develop and test, implementation, optimization.
• Document design specifications, user acceptance test and release.
• Involved in user/vendors discussion and brainstorming session if required.
• Data integration from various sources.
• Enhance on existing applications or develop new applications.
• Ensure project delivery timely and status update to project manager and stakeholders.

Requirements:

• Bachelor's degree in Electrical Engineering, Mechanical Engineering or a related field.
• Minimum of 2 years of experience in automation engineering, preferably in the semiconductor manufacturing industry.
• Familiarity with Manufacturing Executive Systems (MES) like SiView.
• Experience in SECS/GEM development.
• Experience with .NET Framework, C#/VB.NET, Oracle, MS SQL, PL SQL, Web Services/Web API, ASP.NET, HTML5.

Job Summary

You will serve as a Full Time Site In-Charge, leading on-site operations to ensure safe, high-quality execution of tunneling works including Mined Tunnels and Cross Passages. You will collaborate closely with project teams to drive progress and uphold project standards.

Responsibilities

• Lead daily site operations to ensure timely and efficient work execution
• Assisting the project manager at times in need
• Apply knowledge of tunneling works such as Mined Tunnels and Cross Passages to oversee technical site activities
• Conduct regular inspections of construction sites to identify and eliminate potential safety hazards, ensuring a safe working environment
• Enforce site safety rules rigorously to minimize work-related accidents and injuries
• Supervise sub-contractors and in-house workers to maintain productivity and quality standards
• Collaborate with site operations staff to align work progress with the project schedule
• Verify that installations are performed according to construction drawings to meet design specifications
• Monitor work progress and quality continuously to ensure compliance with workmanship standards
• Attend daily tool-box meetings and communicate clear, actionable instructions to the workforce
• Ensure full understanding and compliance with project requirements and scope of work
• Prepare detailed Daily Reports and Production Reports to document site activities and progress
• Strong skills in interpreting and reading drawings
• Mechanical Knowledge needed
• Proficient in preparing Bar Bending Schedules (BBS) will be advantage
• Must be knowledgeable in AutoCAD usage and functions
• Fluent in English