Total 4,526 it technician job vacancies

Multinational corporation is looking for mechanical technician

Job scope:

• Conducting fabrication, MIG welding, & fitting
• Assembly parts for equipment
• Other general duties

Requirements:

• Understanding MIG Welding
• Experience as mechanical fabricating & fitting

5 days’ work week, office hours

Great benefits

Monthly Salary: UP to $3000
Working Address: Tuas Basin Link
Working Hours: 8.30am to 6pm

Responsibilities & Duties:

Core responsibilities:
- Inspect and test engines to find faults (visual checks, listening for abnormal noise, power checks, scan-tool diagnostics, etc.).
- Diagnose problems in key systems: fuel, ignition, cooling, lubrication, exhaust, air intake, and engine mounting/suspension.
- Dismantle engines or components (cylinder head, pistons, crankshaft, timing system) for detailed inspection and measurement.
- Repair or replace worn and defective parts, then reassemble and adjust the engine according to manuals and specifications.
- Perform routine maintenance: oil and filter changes, spark plug replacement, belt changes, valve clearance adjustment, tune‐ups.
- Run the engine after repair (idle and load tests), check performance, and fine‐tune for smooth running and correct fuel consumption.

Daily Responsibilities:
- Carry out scheduled services on Engine related equipment, Hydraulic Power packs, Compressors, High Pressure Waterjet pumps (fluids, filters, inspection checklists).
- Use diagnostic tools and software to read fault codes and monitor engine parameters.
- Adjust and repair engine support systems: cooling fans, radiators, water pumps, oil pumps, fuel pumps, injectors or carburetors.
- Maintain records (PMS) of work done, parts used, and tests performed to meet workshop or regulatory requirements.
- Communicate findings, repair options, and costs to Technical Managers or customers.

Qualifications and Requirements:
- Relevant trade certification, diploma, degree, or equivalent qualification in Mechanical Engineering, Automotive Engineering, Marine Engineering, or a related field.
- At least 2 years of relevant experience in servicing, troubleshooting, overhauling, and repairing diesel and petrol engines.
- Hands-on experience with diesel engines (e.g., Yanmar, Lister, Kubota, Deutz, HATZ), including overhaul of engine blocks, cylinder heads, injectors, and high-pressure fuel systems.
- Hands-on experience with petrol engines (e.g., Honda), including overhaul of engine blocks, cylinder heads, injectors, and fuel systems.
- Experience with offshore or marine engine systems, including winches, hydraulic systems, piping, and instrumentation, will be an advantage.
- Experience in compressor and engine repair is an added advantage.
- Ability to read and interpret mechanical schematics, technical drawings, wiring diagrams, service manuals, and technical bulletins.
- Strong practical mechanical skills, including the use of hand tools, torque wrenches, micrometers, dial indicators, and other precision measuring instruments.
- Basic electrical and electronic troubleshooting knowledge, particularly for modern engines equipped with sensors, ECUs, and engine management systems.
- Good understanding of workplace safety practices when working with engines, fuels, exhaust systems, lifting equipment, and rotating machinery.

Benefits:
- Annual Leave
- Medical Leave
- Medical Insurance
- Additional information on employee benefits and leave entitlements will be shared during the interview process

Nextbeat Singapore Pte.Ltd.

EA License Number: 22C1267

EA Personnel: R22110252

Responsibilities:

• Responding to and resolving fault calls referred by other technicians.
• Performing basic checks and troubleshooting on PC systems and power generators.
• Liaising with relevant authorities (like NCS and LTA in Singapore) regarding application and network issues for the VEP system.
• Troubleshooting CEPAS readers and conducting monthly power generator checks.
• Arranging the deployment of other technicians and managing liaison with LTA representatives regarding project faults. .

Requirements

• Min Nitec and above
• Min 1 year of working experience

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Meets with potential customers alongside sales representatives. Demonstrates products through presentations and live demos. Answers technical questions from customers. Designs solutions tailored to customer needs. Creates proposals, proof-of-concepts, and technical documentation. Supports the sales team during negotiations and implementation planning.
Strong technical knowledge, Communication and presentation skills, Problem-solving ability, Customer relationship management, Understanding of business and sales processes.
Qualification: - Degree in Mechanical Engineering/ or Electrical/Electronic with minimum 3 to 5years of experience in Pumps Industry.

1) Dismantle and Reassemble Instrumentation Equipment

• Identify potential sources of hazard prior to dismantling.
• Use correct procedures and correct method of dismantling.
• Carry out the correct isolation and disconnection procedure.
• Identify, check and prepare components.
• Apply appropriate tests and test equipment to ensure reassembly is correct and effective

2) Monitor and Maintain the condition of Instrumentation Equipment.

• Adjust instruments to meet the operating specification
• Make adjustments with minimum disruption to any ongoing activities and minimum waste of resources.
• Monitor and record what has been carried out in work history or log.

3) Diagnose Faults in Equipment.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Carry out Visual, Close and Detailed inspections on ‘Ex’ equipment.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

• Unplanned discharges to the environment are identified, halted where possible, and reported according to policy, procedure and regulation.
• Relevant PPE is used to deal with unplanned discharges using company procedures.
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure.
• Environmental protection and pollution control are enforced effectively with colleagues, subordinates and subcontractors.

5) Emergency Response

• Demonstrate competence during Emergency Response Drills and training exercises.
• Carry out Emergency Response role

Qualifications and Experience:

• Proven experience and/or qualified to N/SVQ/HNC/HND in Instrument Engineering or local equivalent
• 3 yrs experience desired with offshore experience preferred.
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Instrument/Mechanical Isolation Standards and Risk Assessment.
• COMP ex E’X’ course preferred.
• Medically fit to offshore International standards such as ENG1 or equivalent

Job Description:

• Responsible for performing visual and NDT inspection.
• Responsible for performing manual/mechanical/chemical cleaning.
• Work closely in accordance with Standard Operating Procedures, Data Cards, Process Controls to achieve the highest quality of work.

Requirement:

• Min Nitec in Precision/ Mechanical Engineering or relevant
• Min 2 years of NDT experience in PT,MT,UT,RT & ET

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Zenith Infotech (S) Pte Ltd. was started in 1997, primarily with the vision of offering state-of-the-art IT Professionals and solutions to various organizations and thereby helping them increase their productivity and competitiveness. From deployment of one person to formation of whole IT teams, Zenith Infotech has helped clients with their staff augmentation needs. Zenith offers opportunity to be engaged in long term projects with large IT savvy companies, Consulting organizations, System Integrators, Government, and MNCs.

EA Licence No: 20S0237

Role:

• Provide technical support and maintenance of IT infrastructure.

• Monitor system performance, troubleshoot, and resolve IT issues.

• Implement system upgrades and enhancements.

Requirements:

• At least 6 years of experience in IT support and infrastructure maintenance.

• Good communication, project management, strong analytical, problem-solving skills.

• At least 3 years of working experience in managing or maintaining Microsoft Windows and/or Red hat/Linux Server in a Cloud environment.

• Possess a strong understanding of security practices in server, database, and network is important.

• Manage the escalation processes and perform service recovery for incidents that directly impact services or users.

• Conduct internal security reviews and assist in internal and external audits

• Support user projects involving infrastructure acquisitions and evaluations.

• Review infrastructure capacity and forecast capacity needs for growth and new projects as well as for obsolescence of old technology. Upgrade the systems in a timely manner to meet such needs.

• Review database infrastructure capacity and forecast capacity needs for growth and new projects as well as for obsolescence of old technology. Upgrade the database systems in a timely manner to meet such needs.

• Ensure the Infrastructure servers and networks systems are adequately secured; and the necessary security tools and monitoring systems are in place to protect against any unauthorized access or attack.

• Ensure the database servers are adequately secured; and the necessary security tools and monitoring systems are in place to protect against any unauthorized access or attack

• Continually exploit technological advancements or new processes to improve on the robustness, performance or resilience of existing operations and services.

• Assist in the planning, review and testing of the IT Disaster Recovery Plan for ensuring the resiliency of the IT infrastructure services.

• Adherence to the Board’s internal processes, procedures and policies for ensuring quality output as well as sound security and controls.

• Self-motivated, dedicated, committed and resulted-oriented team player with strong initiative, ownership and possess good inter-personal and analytical skills.

Technical Skills Requirements:

Integration Development:

• AWS Lambda

Database and Server Infrastructure (1 or 2 of the following):

• AWS Compute (e.g EC2, Fargate)

• AWS RDS (e.g. RDS, Aurora)

• AWS DynamoDB

Network Infrastructure Technologies (1 or 2 of the following):

• AWS VPC (e.g. Subnet, NACL, Security Group, Route Table, Transit Gateway)

• AWS Firewall (e.g. Network Firewall, WAF)

• AWS Route53

• AWS ELB

Data Management and Middleware (any of the following):

• JAMS Scheduler

• Keycloak / RedHat SSO

Continuous Integration (CI)/ Continuous Delivery (CD) Process or Set Up CI/CD Pipelines (e.g. build, setup, test, release, deploy) - 1 or 2 of the following:

• Gitlab Enterprise

• Binary and Build Artifact repository

• Build Pipeline

• Dynamic Application Security Testing (DAST) tools

• GIT Source Code Repository

• Release management

• Software Composition analysis

• Static Application Security testing (SAST) tools

Environments/Systems (1 or 2 of the following):

• Linux

• Open System Environment

• Red Hat Linux

• Windows

Operating System (1 or 2 of the following):

• Linux

• Red Hat Linux

• Windows Server

Platforms (any of the following):

• Amazon Web Services (AWS)

• Kubernetes

Databases (any of the following):

• MySQL

• PostgreSQL

Programming Languages & Other Languages (1 or 2 of the following):

• Bash/ Shell

• Python

• PowerShell

• HCL (Terraform)

Technologies (1 or 2 of the following):

• AWS EKS

• AWS EMR

• AWS Glue

• Amazon QuickSight

• AWS IAM

• AWS Step Function

Tools (1 or 2 of the following):

• Ansible

• Terraform / OpenTofu

• SFTP / OpenSSH

• AWS CLI

• JMeter / SOAPUI / Postman

To apply:

Please send your latest CV in MS Word format to jennifer@zenithinfotech.com.sg

Appreciate the interest of all applicants; however only shortlisted candidates will be notified.

Job Summary

Manicurists provide daily nail and hand care services, including manicures, pedicures, massages, and nail treatments, while delivering excellent customer service and maintaining a clean, sanitary work environment.

Responsibilities

• Discuss nail treatments, nail care and treatment options, and available services with clients to guide their choices
• Remove nail polish safely and efficiently to prepare nails for services and/or treatments
• Clean, trim, and file nails to achieve desired shapes and maintain nail health
• Reduce calluses and smooth rough skin to improve hand and foot comfort
• Massage and moisturize hands during manicures and feet during pedicures to enhance client relaxation
• Perform manicures and pedicures tailored to client preferences to ensure satisfaction
• Deliver exceptional customer service and build strong client relationships to encourage repeat visits
• Maintain a clean, sanitary, and organized workstation and environment to meet hygiene standards
• Stay informed on the latest nail trends and techniques to offer modern services
• Adapt to a fast-paced work environment while maintaining quality and attention to detail

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators

Switchboards, Motors, Wiring, Portable tools etc

• Comply with relevant authorisation procedures, safe working practices and specific instructions.
• Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.
• Ensure resources and spares are planned for and used cost effectively.
• Ensure the correct, current operating requirements are available for reference.
• Ensure any assets which have been maintained or had parameters adjusted still comply with spec ified operating requirements with minimum disruption and with the specified methods, tools and materials.
• Monitor and record any maintenance or adjustments accurately in work history in MMS.

2. Monitor And Assess The Performance And Condition Of Electrical Assets

• Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods Use monitoring equipment or procedures correctly to assess the condition of electrical assets Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.
• Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.
• Compare current performance with previous assessments and take action where differences must be addressed

3. Diagnose Faults in Electrical Assets.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4. Monitor and Maintain Pollution Control Measures

• Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits
• Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure
• Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5. Emergency Response

• Carry out Emergency Response Role
• Show competence during drills and exercise

Qualifications and Experience:

• Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering 
• Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired  Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV 
• COMP ex E’x’ Course. 
• Preferred courses: HV/LV Protection and HVLV Switching. Medically fit to offshore International standards such as ENG1 or equivalen

Job Description & Requirements

· Ensure timely generation and issuance ofNDT report on daily basis.

· The inspector/team lead / engineer willperform inspections applying various NDT techniques in accordance withapplicable specific code, procedure, and or written criteria.

To be successful in this position, you musthave the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT,PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II inthe above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsivewhen call for assignments and willing to work after hours and weekends whennecessary.

· Maintain a professionalism and competenceat work

· Share in our purpose – to serve others,to pursue excellence, and to grow profitably,

· Employee will work as a team lead /member of local call out crews performing UT, MT, PT, ET, RT and RI.

Company Overview / Employee Value Proposition

ENGINEERING SERVICES of Electrical & Instrumentation

• Construction, Design, Testing & Commissioning and Operation of Metro rail projects for Power supply system and Sub system like ETTS, SCADA, and Substation automation.
• Project Management for Industrial projects and Thermal power plants
• Preparation of O&M Manual & Training arrangement
• Project management consultancy, Training, & development support
• Engineering Consultancy
• Equipment delivery for all kind of industries.

Job Summary

The Commissioning Technician is responsible for installing, testing, commissioning, and troubleshooting electrical/mechanical systems to ensure they operate safely and in accordance with project specifications and standards.

Responsibilities

• Install electrical and mechanical systems and equipment following project specifications and safety standards
• Perform functional tests, inspections, and performance checks according to technical drawings and specifications
• Identify, troubleshoot, and resolve faults during testing and commissioning to ensure system reliability
• Assist engineers with system start-up and site acceptance tests to verify operational readiness
• Prepare accurate test records, commissioning reports, and handover documents for project documentation
• Ensure all commissioning activities comply with safety regulations and project requirements
• Coordinate effectively with site teams, clients, and subcontractors to support smooth commissioning processes
• Provide technical support during defect rectification and warranty periods to maintain system performance

Required competencies and certifications

• Diploma/ITE or equivalent in Electrical, Mechanical, or related field
• Ability to read and interpret technical drawings and specifications accurately
• Knowledge of testing and commissioning procedures for electrical/mechanical systems
• Competence in fault finding and problem-solving during commissioning activities
• Familiarity with site safety procedures and work permit requirements
• Willingness to work on-site and support project schedules

Preferred competencies and qualifications

• Relevant experience in testing and commissioning works
• Skills in documentation, reporting, and team coordination during site activities

Responsibilities

• Provides administration support to the IT Operations Team that is deployed at the customer site.

• To submit the service request tickets in ITSM when requested by the support teams or clients, track and ensure they are completed to meet pre-defined turnaround time. 

• To help and assist in tracking the clean laptop counts. 

• To help and assist in scheduling appointments for various activities. 

• To keep track of the asset inventory in the storeroom. 

• Any other ad-hoc duties as required and assigned in relation to the administration support. 

Requirements

• Basic knowledge in using ITSM tool will be an added advantage. 

• Proficient in MS Word, Excel and PowerPoint. 

• Good communication skills in both oral and written. 

• Basic technical skills in End User Computing Devices (EUCD) will be an added advantage. 

• At least 1 year of experience in similar job capacity. 

Shortlisted candidates will be offered an Agency Contract.  Agency Contract duration is till 31 March 2027

Licence no: 12C6060

Round-the-clock monitoring and maintenance of the System (hardware and software) to ensure system uptime in accordance to SLA commitments

Respond to all incident / service calls and be first responder onsite to troubleshoot and resolve incidents including basic repairs or parts replacements

Create / update and track ticket in ticketing tool to closure observing SLA commitments

Escalate, when necessary, in accordance to escalation matrix

Perform regular preventive and corrective maintenance, troubleshooting system hardware and all computer-based systems.

Coordinate and work with third-party suppliers or other contractors to identify the causes of issues e.g. hardware, software, network problems and etc. that may affect the proper functioning of the System.

Liaise and work closely with customers to address service concerns and to solve technical problems.

Work with technical team to resolve more advanced issues when necessary

Perform Install / Move / Add / Change (IMAC) activities as tasked

Ensure all material is properly documented and handed over during shift changes

Perform any ad-hoc duties as assigned

Build sustainable relationships and engage customers by taking the extra mile

Job Requirements

Higher NITEC in Electrical, Electronics, IT or equivalent

Relevant experience in IT system support and hardware maintenance

Experience in electrical/mechanical drawing, service/repair manuals and or diagrams will be added advantage

Basic knowledge in Networking and Database management will be added advantage

Strong communication and interpersonal skills. Self-starter, self-motivated and critical thinker who embraces challenges

Ability to work responsibly, independently and in a team

Able to interact with all levels of people and work under stress

Training will be provided
Working hours

Rotating 12 hours shift or as assigned.

Shift pattern: 3 Days work shift followed by 2 days’ rest, 2 Days work shift followed by 3 days’ rest

2 Months Day shift, followed by 2 months night shift

Ability to travel to other sites during shift may be required

Responsibilities

• Oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services.
• Design, implement, and maintain the IT infrastructure of the organization.
• Maintain Windows servers, virtualization platforms, and storage solutions.
• Manage Active Directory, DNS, DHCP, and Group Policy.
• Ensure high availability and disaster recovery with backups and replication.
• Monitor system performance, troubleshoot issues, and apply patches and updates.
• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.
• Implement and monitor network security policies, intrusion detection, and access control.
• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.
• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.
• Ensure compliance with regulations.
• Conduct security audits and enforce policies on user access, encryption, and authentication.
• Create and maintain network documentation, including network diagrams, configurations, and procedures.
• Carry out any other tasks assigned by the management

Requirement

• Min Degree in Information Technology or relevant
• Min 5 years of experience in providing Network, System and Cybersecurity operational support.
• Experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.
• Certifications in CCNA/ CCNP/ CCIE/ Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security will be required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Build and expand the partner network by developing new relationships while strengthening existing ones in Singapore.
• Oversee and grow a portfolio of partners to achieve sustainable revenue and margin growth.
• Position the company as a trusted cybersecurity advisor by educating partners on solutions and value propositions.
• Uncover new opportunities for collaboration across client subsidiaries and business units.

Requirements:

• Diploma in Business, Information Technology, or related field.
• At least 2 years of experience in in B2B sales, IT channel management, or account management.
• Proven track record in solution sales, preferably in cybersecurity or distributor environment.
• Strong relationship management, communication, and presentation skills, with the ability to work independently.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996