Total 44 process improvement manager job vacancies in Penang

JOB SUMMARY:

The job involves supporting departmental objectives and daily testing operations, coordinating various processes to enhance specifications and improve quality and cost efficiency. Responsibilities include managing test cell processes, overseeing recipe setups, and improving product quality through early detection and failure analysis. The role also requires ensuring compliance with ISO standards and safety protocols, as well as assisting engineers with operational support and special projects. Continuous improvement in testing processes and quality systems is a key focus.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

Job Summary
1.1 Physical logistic tasks of receiving, warehouse and shipping.
1.2 Interact with cross functional team within Plant and Bosch.
1.3 Interact with external parties – Logistics Service Providers, Liners etc.
1.4 Ensure the warehouse operates at peak efficiency, with customer satisfaction being the primary goal, by supervising, organizing, directing, and training warehouse employees and establishing, monitoring, and managing operation goals.

Job Scope
2.1 Responsible for the physical logistic tasks of receiving, warehousing, and shipping to ensure the quality objectives and delivery deadlines are met
2.2 Responsible for the accuracy of inventory with physical counts and reconciliation
2.3 Safeguards warehouse operations and contents by establishing and monitoring security procedures and protocols.
2.4 Ensure compliance with health and safety legislation
2.5 Manage overall LOM performance results with coaching, counseling, and disciplining associates, planning, monitoring, and appraising job results.
2.6 Achieve financial objectives and prepare annual budget, expenditures, analyze variances and corrective actions.
2.7 Lead and participate actively in Bosch Production System (BPS) related activities.
2.8 Support and prepare management reporting as and when necessary.
2.9 Any other duties assigned by the immediate superior from time to time.

Develop, maintain, and manage Expeditors world-wide activity with one of our industry-leading, top global customers to achieve optimum business retention and development. Ensure that customer's cross-functional and geographical operational requirements are proactively identified and serviced. Act?as the chief revenue growth champion and orchestrator for global strategic business planning and execution by leveraging global relationships, your industry knowledge, and Expeditors product, geo, and service leadership. Deliver world class business reviews and workshops tailored to your customer that drive further collaboration between Expeditors and the customer with a focus on value creation and cost reduction as measured through business intelligence. Drive alignment and co-collaboration efforts in multiple geo's to identify customer's top supply chain priorities and challenges. Work with Expeditors senior executives and product & geo management to create value-add solutions that are timely and relevant to the customer's ecosystem. Increases Expeditors' revenues and profitability through providing enhanced valued-added service.

SCOPE OF POSITION

To create a unique Expeditors customer experience through total ownership of and accountability to:

• Understand global customers' profile, needs and expectations.
• Retain existing business and continuous pursuit of global business development.
• Create a strategic and mutually beneficial relationship for Expeditors with the customer worldwide

REPORTING STRUCTURE

Customer Retention and Development Manager

RESPONSIBILITIES

BROAD FUNCTIONS:

• Responsible for smooth operations of the plant utilities system
• Coordinate and provide support to production / manufacturing needs
• Coordinate and execute Facilities cost saving & improvement programs
• Ensure all the subscribe system are maintained
• Lead and liaise with relevant local government agencies & contractors
• Lead and develop direct reports

Regular

• Oversee and lead the team to establish procedure, system monitoring & preventive maintenance to ensure smooth operation
• Identify system weakness and implement improvement/enhancement project to ensure smooth operation
• Lead facilities operation team to support production / manufacturing needs
• Lead facilities operation team in review & analyse the operating data to optimize the Facilities operating system
• Plan, supervise and lead the team in execute cost saving & improvement program
• Control operating expenses to ensure within budget
• Ensure compliance to IMS, ISO9000, ISO14000, Contamination Control, Housekeeping & Safety
• Liaise with contractor, consultant on the facilities related matters
• Lead and develop direct reports through hands-on and proper training.
• Carry out special task as assigned by Senior Manager/ Dept. Head
• Support the activities to the company needs

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct  buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

• Specifically to carry out process capability and development programs related to Lube Process
• Carry out Lube Cpk, instruments’ EMP and Gauge R&R improvement activities
• Process transfer for new products implementation
• Plan and implement cost improvements or savings for Lube Process
• Yield/Defect/Quality improvement
• New software and project propagation buy off
• Synergy with ETA for new equipment development
• Machine PPH Improvement via process development and improvement
• Assist second source development for Lube Process
• Maintain and establish documentation and FMEA leadership for Lube Process
• New Equipment Qualification
• Continue support ACD Process
• Conduct training for new engineers and cross site teams who need to understand Lube Process.
• Subject Matter Expert for Lube Process.

We are looking for a motivated, dynamic Service Manager to join our team based in Seksyen U5 Shah Alam. Your responsibilities will be to manage and control the Service Department in a consistent manner to fulfil the Branch’s contractual obligations while operating within the confines of the service budget.

In this role you will be responsible for:

A. Service

• To ensure entire service team completes all monthly services. State of service completion of 100%
• To maintain accurate records of all service vehicles in the branch in relation to:
• To manage & control the Branch’s fleet of service vehicles in a cost effective manner, and without compromising on safety
• Ensure all new businesses and installations are completed within 5 working days from the date of service agreement/job confirmation
• Ensure each service team is route-ridden once every 3 months
• Plans, organizes and prioritizes workload effectively.
• To ensure a general compliance of work procedures in all hygiene services undertaken in the area to the guidelines stated in the company’s manuals and instructions

a. Renewal of road tax and Puspakom inspections

b. Maintenance of service vehicles

c. Repair costs

d. Fuel usage

e. Driver logs

f. Service tools and safety equipment register

B. Stocks

• To monitor proper stock issuance and returns on weekly basis for all service teams
• To ensure that the service equipment, drills, service tools and safety equipment used is appropriate and in good condition and sufficient quantity to support the branch service obligations
• To attend monthly stock take and regular vehicle stock audit
• To conduct monthly service & warehouse meeting
• Supports in ensuring the store in the branch is being managed and controlled efficiently (inclusive of used EFR)

C. Administration

• Ensure that all required stock return, reports and e-claims to the Head Office are prepared accurately, and dispatched promptly
• To conduct formal weekly and monthly meetings with supervisors and technicians. Monthly meeting minutes are required for all meetings
• To provide the Branch Operations Manager with status reports on a weekly basis covering:

a. State of Service c. Customer Issues

b. Supervisors’ issues d. Other issues

D. Staff Recruitment, Welfare & Development

• Recruit (subject to prior approval from the Branch Manager/Branch Operations Manager) for new Service Technicians/Service Lady
• Induct, train and manage service staff effectively
• Maintain a high level of morale amongst service staff
• Ensure that all staff has full understanding of the Company’s objectives and policies

Quality Assurance & Training

• Service training: To organize induction program for new technicians, maintain training records, to coordinate and participate as trainer for refresher training for service technicians and new staffs recruitment for all departments. Ensure a high level of competence in the required skills amongst service staff by providing continuing training and practical assistance & guidance in the field
• QA: To coordinate regular QC and to follow-up with specific client complaints where required. Develop good customer relationships through being knowledgeable about your work, and taking ownership of service problems
• OCS 224: Ensure that all customer complaints (callouts) are attended to within 24 hours without further escalation
• Supervisors Audits: Ensure that Service Supervisors duties are audited monthly
• Technicians Audits/TPA Assessment: Ensure each Service Technician is audited according to company requirement
• Service Audits: To carry out regular service audits of branches in all service area
• Supervisors KPI: To ensure all supervisors meet their monthly KPI

E. Health & Safety

The Service Manager is responsible for implementing the arrangements detailed in the health and safety management system and the safe systems of work. Specifically the Service Manager will:

1. To understand and be aware of the requirement of Occupational Safety & Health Act 1994 to ensure that all staff for whom you are responsible are equally aware of the Act and its requirements.
2. To ensure that all chemicals are handled, stored and applied with due regard to the safety standards laid down within the Company, and that staff are never exposed to untoward risk in the course of their work
3. To ensure that all service vehicles are roadworthy & safe through monthly inspections
4. To constantly lead by example, Good & Safe Working Practices within the Branch.
5. Provide adequate supervision to all employees so that they work safely and without risk to health.
6. Carry out regular checks on the work of each employee reporting to them to ensure that work is carried out safely and in accordance with safe systems of work;
7. Remedy any deficiencies identified following audits/inspections;
8. Provide information, instruction and training to all employees so that they are competent to undertake their work safely;
9. Issue written work instructions for each work activity which specifies the appropriate safe system of work to be followed and any control measures identified from site-specific risk assessments;
10. Monitor the work of contractors so that they work safely and without risk to health and in accordance with the agreed safe systems of work.
11. Join monthly SHE review meeting conducted by BM/BOM

F. Care of Company Assets

• To ensure the proper use, maintenance and security of the Company’s premises, company vehicles, service equipment, stock of chemicals, hardware, monies and other properties of the Branch.

OTHER DUTIES:

• Sales team relationship: Maintain friendly and co-operative relations with the sales team providing sales leads, and other useful feedback from the customer
• Sales support: Support the sales team in achieving the sales targets for the branch. This includes assistance in special surveys and sales presentations where required
• Self-improvement: To constantly improve his/her knowledge of hygiene management by private study, membership of associations and attendance at courses, and also by the study of technical literature provided by the Company, and through practical experience in the field
• Agent of best practice: In all your actions, to promote the best working practices of this company and to transmit these practices in your role of overseeing the branch to your supervisors/coordinators.

The ideal candidate will possess:

• Minimum a Bachelor Degree in any related field with at least 5 years relevant Service Management/ Supervisory experience

• Strong leadership qualities with planning, organizing and problem solving ability
• Able to work in dynamic and fast paced environment
• Excellent in promoting teamwork and synergize the team towards achieving service KPI
• Able to work autonomously and thrive on challenges
• Possess own vehicle, is a Malaysian or holds a relevant resident status
• Driven by data, analytical, able to develop team by managing their service activities and coach them accordingly

• Required valid driving license because driving is part of the job requirement for this designation

Highly Desirable:

• Excellent problem solving , multi-tasking & planning skills
• Ability to motivate and manage a team to achieve & meet service KPI
• Ability to think on your feet to coach team with service and customer focused solutions
• Versatility to build rapport with people at all levels
• Excellent and multi-lingual in both verbal and written English and Bahasa Malaysia
• Commercially focused and is alert of the changes and updates in market movement
• Able to travel to various locations within the designated territory

• Attractive base salary
• Fixed Transportation Allowance and Fuel Card
• Comprehensive Insurance Plans for Surgical & Hospitalization, Term Life and Personal Accident
• Out-patient & Specialist Coverage
• Dental & Optical Coverage
• Additional Retirement benefits
• Staff Purchase Plans
• Mobile Phone Subsidy and Smart work gadgets/ tools

Equal Opportunities

Rentokil Initial believes in supporting all employees to provide equal opportunities and avoid discrimination. We also place emphasis on workplace diversity which means that we are serious about creating an inclusive environment that accepts each individual's differences, embraces their strengths and provides opportunities for all colleagues to achieve their full potential.

Location:

Rentokil Initial (M) Sdn Bhd.   

Plot 23 (Building 1), Jalan Jelawat, 13700 Seberang Jaya, Pulau Pinang.

• Perform all tasks assigned by the immediate superior in accordance to the specifications and schedule.
• Plan and organize use of resources effectively to meet OEE, productivity, internal failure cost target.
• Work with all levels of the organization to improve quality levels, providing customer with “Zero Defect Product” and “100% On-Time Delivery”.
• To translate the company’s objective into department goals and ensure the goals are cascaded to Production line leader and operator levels.
• Create an environment that is culturally embedded in a “Quality First” mentality.
• To maintain records for all downtime and to clinically analyze the lost opportunity for improvement.
• To initiate project, evaluation and study for capacity and quality improvement.
• To follow up and summarize the entire pilot builds failure into “OPEN POINT LIST”.
• Instill a continuous improvement mentality to production line leader and operator level.
• Establish performance indicators and evaluate production line leader and operator level.
• To Lead “CIP” production daily management meeting.
• To liaise with TEF group for improvement.
• To perform the production line process confirmation.
• To provide support and guidance to line leaders, technicians and operators on their daily tasks.
• To ensure production line leaders, technicians and operators follow quality control procedure and all the BPS activities and procedures.
• Review line leaders, technicians and operators performance on quarterly basic and provide Guidance to improve his/her performance.
• Coordinate and follow up various departments to ensure smooth execution day to day activities.
• Responsible for year end physical inventory count.
• Enforce safety and 5’S activity assigned by superior.
• To evaluated and prepared year end GPD for subordinates.
• Any other duties assigned by the immediate superior from time to time.

1. Product Lead overseeing Media programs from qualification through mass production and end-of-life. Primary interface between internal cross-functional teams and external customers to deliver on-time product launches and production ramp readiness.
2. Leads new and iteration program qualifications, ensuring critical product parameters, specifications, and documentation are fully defined to support smooth qualification builds and volume ramps. Applies data-driven KPIV/KPOV analysis to improve process control, yield, and product margin.
3. Manages programs, including engineering sample logistics, shipment execution, head/media pairing, and supply planning to achieve optimal HDD yield. Drives continuous improvement initiatives with internal stakeholders and external partners (HDD) to ensure sustained product quality, margin, and operational excellence.

Qualify, Assembly Sustenance and Process Improvements on Power QFN package and Cu Clip related thin die assembly processes.

Key Responsibilities

• Design package, develop processes to qualify PQFN (Power Quad Flat-No lead) packages for SPS (Smart Power Stage) products & its associated modules.
• Ramp up manufacturing volume and qualify required sources.
• Responsible for line sustaining. Improve assembly yield, capacity, quality and costs.
• Address internal and external customer feedback / issues collaborating with Test / Product Engineers, Quality & Operations organization.
• Manage Product Lifecycle Management documents to the latest status.
• Conduct change-management with suppliers to sustain / improve capacity and cost. 

Junior Managers Program is a program designed to groom potential future management staffs who is able to contribute to the success of the company. This is an 18 to 24 months program which you will be assigned to different functions within the organization or complete requires assignments in your functional area which could include one assignment abroad. This will give you the breadth of experience and exposure to help you move into the management role in mid to long term within the assigned division.

What’s in store for you:

• Systematically develop your leadership and decision-making skills through multifaceted involvement in projects as well as in day-to-day business;
• Benefit from the in-depth guidance of an experienced mentor and senior executives, including regular feedback; and
• Gain international experience during an assignment abroad.

The Program Manager will lead the technical and operational readiness for a new manufacturing facility, driving equipment installation, process setup, qualification, and production ramp. This role ensures the factory achieves safe, efficient, and high-quality output through strong cross-functional coordination and engineering leadership.

Key Responsibilities

1. Factory Start-Up & Ramp Execution
• Lead end-to-end engineering activities for new factory setup (facility readiness, equipment installation, and commissioning)
• Drive qualification processes  to ensure production readiness
• Establish and execute ramp plan to meet output, yield, and quality targets
• Identify and mitigate technical risks during start-up phase

2. Process & Equipment Engineering
• Define, develop, and optimize manufacturing processes
• Oversee equipment selection, installation, calibration, and validation
• Ensure process capability (CPK), cycle time, and efficiency targets are achieved
• Implement continuous improvement initiatives to enhance productivity and yield

3. Cross-Functional Coordination
• Act as primary engineering interface with Operations, Quality, Supply Chain, Facilities, and EHS
• Align timelines and deliverables across teams to meet ramp milestones
• Support supplier engagement and technical issue resolution

4. Team Leadership & Capability Building
• Build, lead, and develop a high-performing engineering team
• Define roles, responsibilities, and performance expectations
• Coach engineers on problem-solving, root cause analysis, and technical skills
• Foster a culture of ownership, accountability, and collaboration

5. Quality & Compliance
• Ensure compliance with internal standards and external regulations
• Drive root cause analysis and corrective/preventive actions (CAPA)
• Support audits and ensure documentation readiness

6. Safety & Risk Management
• Promote a strong safety culture and ensure adherence to EHS requirements
• Conduct risk assessments for new processes and equipment
• Ensure safe startup and operation of all systems

⸻

Key Deliverables / KPIs
• On-time factory readiness and successful production ramp
• Yield, throughput, and cycle time targets achieved
• Equipment uptime and process capability metrics
• Zero major safety incidents
• Team capability development and retention

Position Overview

Lead strategic sourcing initiatives for critical capital equipment across Western Digital's global manufacturing operations, driving cost optimization, supply continuity, and technology innovation in alignment with WD's operational excellence and business objectives.

Key Responsibilities

Strategic Sourcing Leadership

• Develop and execute comprehensive sourcing strategies for capital equipment portfolios (wafer fabrication, HDD/SSD manufacturing, test equipment) supporting $XXM+ annual spend • Lead cross-functional teams in supplier selection, negotiation, and contract execution for high-value capital investments • Drive Total Cost of Ownership (TCO) optimization through strategic supplier partnerships and innovative commercial models • Establish multi-year sourcing roadmaps aligned with WD's technology roadmap and capacity expansion plans

Supplier Relationship & Risk Management

• Build and maintain strategic partnerships with Tier-1 OEMs and equipment suppliers in semiconductor and storage industries • Implement robust supplier performance management systems tracking quality, delivery, technical support, and innovation • Develop supply continuity strategies and risk mitigation plans for critical single-source equipment • Lead supplier business reviews and drive continuous improvement initiatives

Commercial Excellence & Value Creation

• Negotiate complex multi-million-dollar capital equipment agreements, including pricing, payment terms, warranty, service, and IP considerations • Structure creative commercial arrangements (consignment, lease-to-own, performance-based contracts) to optimize cash flow • Drive standardization and commonality initiatives to leverage scale and reduce total cost • Identify and capture cost savings opportunities through value engineering, should-cost analysis, and competitive benchmarking

Cross-Functional Collaboration

• Partner with Engineering, Operations, Finance, and Legal teams on capital planning, equipment specifications, and investment justifications • Support new product introduction (NPI) and technology transitions with timely equipment procurement • Collaborate with Global Operations on supplier qualification, installation, and ramp activities • Interface with Export Control and Trade Compliance on regulated equipment sourcing

Team Leadership & Development

• Lead and mentor sourcing team members, fostering professional development and category expertise • Establish sourcing best practices, processes, and tools to drive efficiency and compliance • Champion digital procurement transformation and adoption of advanced analytics