Total 1,029 qc engineer job vacancies in Others category in The Philippines

Job Scope:

• Carryout preventive and corrective maintenance of ACMV systems, including air-conditioning units, FCUs, AHUs, CRAC, ventilation systems, exhaust systems, and associated equipment.
• Perform installation, replacement, upgrading, and commissioning of ACMV equipment and systems.
• Conduct troubleshooting and fault diagnosis of ACMV systems and implement effective corrective actions.
• Inspect equipment regularly to identify defects, deterioration, and operational issues.
• Assess system performance and recommend necessary repairs, replacements, orimprovement works to enhance reliability and efficiency.
• Ensure all ACMV systems operate in compliance with applicable safety regulations, codes of practice, and company standards.
• Prepare maintenance reports, service records, inspection checklists, and other technical documentation related to work performed.
• Coordinate and schedule maintenance, repair, and installation activities to ensure the timely completion of work.
• Liaise with clients, subcontractors, suppliers, and relevant stakeholders regarding maintenance and project requirements.
• Assist in the sourcing, evaluation, procurement, and inventory management of spare parts, tools, materials, and ACMV equipment.
• Monitor stock levels and recommend replenishment of critical spare parts and consumables.
• Participate in tender site visits and site surveys to assess project requirements and provide technical input for tender submissions.
• Support the preparation of quotations, technical proposals, and maintenance plans where required.
• Supervise, mentor, and provide technical training and guidance to junior technicians and apprentices.
• Ensure proper implementation of safe work procedures, risk assessments, and permit-to-work requirements.
• Attend emergency breakdowns and provide after-hours support when required.
• Maintain good housekeeping of work areas, tools, and equipment.
• Perform any other ACMV-related duties as assigned by the superior.

Job Requirements:

• At least 5 experience in ACMV installation, maintenance and repair.
• Education: ITE/ Diploma or equivalent in ACMV/ Electrical or related discipline.

Job Scope:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer, and contractors
• Prepare technical engineering reports as and when required by authorities or client

Requirements:

• Minimum 2 years of experience as Design Engineer in building construction
• Willing to and with enthusiasm to learn in the field of civil & structural engineering design
• Knowledge with Revit Structure is an added advantage

Job Description

• Must be able to understand Technical Drawing
• Preparation of technical specifications and tender documentation.
• Monitoring and ensuring that the work progress is within the schedules.
• Able to do submission of BIM
• Shop-drawings submission for Consultants’ approval
• Attend Project Technical meetings
• Appy and preparation of submission for authority testing & commissioning of project equipment

Requirement

• Administrate contractual requirement of all projects including payment terms and variation orders.

· Provide technical assistance and problem solving in projects.

· Plan, organise and assign project engineers and fabrication team to each specific project.

· Good working attitude, responsible, self-motivated and goal-oriented, a strong desire to deliver results.

Any adhoc projects assigned by General Manager

This role is integral to a pioneering research project focused on advancing geotechnical

investigation and monitoring techniques in the geotechnical engineering sector. The position

requires a combination of lab-based and field-based research.

Job Summary

We are seeking a highly motivated Research Engineer to join our team in developing and

validating a digitalise system for advanced geotechnical engineering solution. The role is

research-based and requires regular time spent both in the office/lab for data analysis and in

the site for field trials and system calibration.

Key Responsibilities

• Research &Development: Conduct detailed literature reviews and identify technical gaps.
• Field Execution& Data Acquisition: Plan and execute field trials on selected sites.
• Data Analysis& Correlation: Develop and validate robust correlation models.
• Digital Platform Collaboration: Collaborate with the software team on the development and testing of a server-based online monitoring platform.
• Documentation: Prepare technical reports, progress updates, and develop detailed Standard Operating Procedures (SOPs) and user guide manuals.

Requirements

• A degree in Civil Engineering is required; fresh graduates are welcome to apply.
• Experience: A strong interest in geotechnical engineering, site investigation, and digital monitoring technologies.
• Skills: Proficiency in data processing, statistical analysis, and technical report writing.
• Work Environment: Must be willing and able to work in both site (fieldwork for trials, calibration, and data collection) and office settings (analysis, reporting, and platform development collaboration).

You may send your resume / CV to email address directly: hr@geonamics.com.sg

Position Summary

The Electrical Simulation Engineer is responsible for product package electrical simulation. 

Candidates with semiconductor packaging experience are encouraged to apply for this position. 

Responsibilities 

• Conduct simulation on SiPi and High speed digital area in component & system level 

• Conduct simulation on RF, EMI, EMC, in component & system level 

• Provide comments and recommendation to product design and process optimization 

• Provide electrical input to mechanical simulation for thermal and stress analysis. 

• Prepare the simulation reports with data analysis and recommendation. 

• Other ad-hoc activities assigned by the reporting manager. 
  

Requirements

• Minimum Master's Degree in electrical engineering or similar discipline.
• Prior experience in electrical simulation within semiconductor industry is preferable.
• Experience in handling internal and customer projects.

• Hands-on skills on EDA tools:

1. ANSYS: Siwave, Q3D, HFSS, Circuit, etc.
2. Cadense: PowerSi, PowerDC, ExtractIM, Clarity, etc.
3. Keysight: ADS, etc.

Reporting to the Project Manager

Overseeing the construction activities, planning, implementation, and monitoring work schedules in accordance to the master and detailed work program.

Liaise with consultants for technical issues and coordinate with subcontractors on the site activities.

Managing interfaces with other contractors working on the project.

Prepare project progressive report to the Project Manager/Project Director.

Prepare report and method statement.

Monitor ongoing construction activities.

We are looking for a motivated and experienced Pile Test Engineer to join our growing team in the construction industry.

Job Responsibilities:

• Conduct and supervise pile load tests (static / dynamic).
• Prepare method statements, test reports, and documentation.
• Coordinate with consultants, clients, and site teams.
• Ensure testing works comply with project specifications and safety standards.
• Analyze test results and provide technical recommendations.

Requirements:

• Degree / Diploma in Civil Engineering or related field.

• Relevant experience in pile testing works preferred.

• Familiar with MOM / site safety requirements.

• Good communication and reporting skills.

• Able to work independently and on-site.

What We Offer:

• Competitive salary (based on experience)
• Career growth opportunities
• Supportive working environment

You may send your resume / CV to email address directly: hr@geonamics.com.sg

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

You are responsible for new equipment introduction, risk assessment, equipment set-up, release, PM, Calibration, lab audits and as well as continuous improvement activities such as equipment reliability improvement, cost reduction, and equipment usage optimization. Through this role, you will enhance your technical skills in equipment management and improvement, project management, and strengthen your engagement and network with vendors and global GEL organizations across Micron sites.

Responsibilities

-Support GEL Equipment and lab operations including Internal and External audits, ESD and PM, Calibration, equipment troubleshooting, Safety and Chemical controls.

- Oversees the installation, modification, upgrade and maintenance of Engineering equipment.

- Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. - -- Establishes programs and solutions for increasing uptime and for equipment problems that affect the engineering process.

-Provides technical support to the engineering equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

- Collaborate with cross functional teams on equipment requirements, space planning, facilitation, purchase and installation of equipment.
- Equipment inventory controls and critical spare parts planning.

- Coordinate external vendors on training, repair, and preventive maintenance of equipment.
- Manage external vendors expectation, set and assess goals and achievements.
- Analyze and support stakeholders’ requirements and expectations.
- Foster closer collaboration amongst cross functional teams.
- Focus on customer needs and provide timely solutions.

Requirement

• Bachelor's degree in engineering with experience with ESD checks

• At least 1 year of experience in Semiconductor Equipment or Tools PM, calibration, and troubleshooting.

• Knowledge with Automated Optical Inspection and ANSYS Simulation

Key Responsibilities

Quality System, ISO & Audit

• Act as Management Representative (MR) forISO 9001 certification.
• Plan, conduct, and coordinate internal quality audits and follow upcorrective and preventive actions.
• Ensure compliance with ISO standards, customer requirements, and regulatoryobligations.
• Maintain, review, and control all quality system documentation, procedures,and records.

Quality Reporting & Data Analysis (Core Focus)

• Prepare and submit weekly and monthlyquality reports to management.
• Track and analyze NCR status, customer return closure cycle time, DPPM,FA/NPI First Pass Yield, and audit findings.
• Monitor operational and quality performance data to identify trends, risks,and improvement opportunities.
• Support management reviews with accurate data and analysis.

FA / NPI & Quality Planning

• Coordinate with Sales, Engineering,and Production on FA and NPI quality requirements.
• Create and maintain Quality Control Plans, Inspection Plans, and CMMinspection programs for new products.
• Monitor FA/NPI cycle time and drive continual improvement activities.

• Participate in quality improvementprojects.

Customer & Supplier Quality Management

• Act as the primary liaison with customersand suppliers on quality-related matters.
• Manage customer feedback, Engineering Change Notices (ECN), andNon-Conformance Reports (NCR).
• Ensure timely corrective actions, closure, and regular status updates.
• Escalate scrap and major quality issues to the Quality Manager immediately.

Calibration & Measurement Control

• Manage calibration of measuringinstruments, equipment, and tools to ensure accuracy and traceability.
• Maintain calibration schedules and records and ensure timely calibration.
• Coordinate with external calibration service providers when required.

Continuous Improvement & Operational Support

• Identify quality risks and process gapsand implement corrective and preventive actions.
• Support continual improvement initiatives and business continuity planning.
• Research and review technical and quality-related data for internal andcustomer needs.
• Track work schedules to meet reporting, audit, and submission deadlines.

Qualifications & Requirements

• Higher Nitec or higher in Precision Engineering, Quality Management, or related field.
• ISO 9001 Internal Auditor certification is preferred.
• Experience acting as Management Representative (MR) is a strong advantage.
• Proven experience in quality reporting, documentation control, and auditmanagement.
• Familiar with FA, NPI, CMM inspection, and manufacturing quality systems.
• Strong analytical, reporting, and communication skills.
• Experience in precision engineering or manufacturing environment preferred.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

Job Descriptions:

• Lead NPI capacity planning and ramp-up readiness.
• Design and optimize FATP line layouts and production flow.
• Govern time studies and validate standard times across FATP lines.
• Drive line balancing optimization and manpower efficiency improvement.
• Perform OEE analysis and eliminate bottlenecks.
• Lead Lean initiatives, including VSM, SMED, Kaizen events.
• Collaborate with the automation team to optimize production line headcount and drive cost reduction initiatives.
• Quantify cost-saving opportunities and track financial impact.
• Mentor junior IE engineers.
• Present productivity analysis and improvement proposals to management

Job Requirements:

• Diploma or Bachelor Degree in Industrial Engineering or a related field; Lean / Six Sigma certification is an advantage.
• Minimum 5 years of experience in FATP or high-volume manufacturing environments.
• Strong expertise in time study, MTM, line balancing, capacity modeling, manpower optimization, OEE analysis, and throughput improvement.
• Advanced knowledge of FATP processes, with a solid understanding of automation impact on labor modeling.
• Proficient in advanced Excel, Power BI, and other data analysis tools, with the ability to prepare financial and productivity reports.
• Strong analytical, structured problem-solving, and project management skills.
• Results-driven mindset with leadership, mentoring, and cross-functional influencing capabilities.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Roles & Responsibilities

• Conduct site visits, site feasibility, solar system design, and complete execution.
• Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of commercial and utility-scale solar power systems.
• Design the arrangements of the solar panels for Rooftop, Ground-mounted, Floating, and other various supported electrical equipment and selection of cables for plant including layouts and schematic diagrams and calculation of technical sizing, BOQ/BOM.
• Perform computer simulation of solar photovoltaic (PV) generation system performance or energy production to optimize efficiency.
• Create checklists for review or inspection of completed solar installation projects.
• Analyse costs and benefits of proposed designs or projects and performing cost reduction analyses for solar systems.
• End to end execution of solar projects.
• Procurement & Vendor Coordination

Requirements

• Willing to travel and will be working in Singapore.
• Minimum a Bachelor’s Degree in Engineering, renewable energy or relevant field
• Minimum two (2) years of relevant work experience
• Experience and knowledge of reviewing Financial Modelling is preferred
• Preferably with Energy Industry or Renewable Products background
• Preferably to have a good track record of solar PV projects
• Assertive to achieve the KPIs and adaptable both as individual and team player
• Technical advisors, EPC contractors, BD related roles are welcome to apply
• Proficiency in MS Office, autocad and PVsyst